Requisition scripts
Good day
I need to add the following the columns to my script
but I dont know how to GRV date, GRV number and Payment date
SELECT poh.segment1 po_number, porh.segment1 iproc_number, porl.line_num,
TRUNC (porh.creation_date) "IPROC Creation_date",
TRUNC (porh.approved_date) "IPROC_approved_date",
porh.authorization_status "Approval_status",
papf.full_name "Requestor",
TRUNC (poh.creation_date) "PO Creation_Date",
TRUNC (poh.approved_date) "PO Approved_Date",
hr_reports.get_person_name(trunc(sysdate),poa.agent_id) Buyer_name,
glcc.segment3 "Cost_centre",
SUM (porl.unit_price * porl.quantity) amount, poh.type_lookup_code
FROM po_requisition_headers_all porh,
po_requisition_lines_all porl,
po_headers_all poh,
per_all_people_f papf,
po_distributions_all pod,
po_agents poa,
po_req_distributions_all rd,
gl_code_combinations glcc
WHERE porh.requisition_header_id = porl.requisition_header_id
AND papf.person_id = porh.preparer_id
AND poh.po_header_id(+) = pod.po_header_id
AND rd.requisition_line_id = porl.requisition_line_id
AND pod.req_distribution_id(+) = rd.distribution_id
AND rd.code_combination_id = glcc.code_combination_id
and poh.agent_id = poa.agent_id(+)
AND SYSDATE BETWEEN papf.effective_start_date AND papf.effective_end_date
AND SYSDATE BETWEEN papf.effective_start_date AND papf.effective_end_date
AND TRUNC (porh.creation_date) BETWEEN TO_DATE ('01/01/2010',
'DD/MM/YYYY'
AND TO_DATE ('30/04/2010',
'DD/MM/YYYY'
AND glcc.segment3 IN
('071100',
'336028',
'336031',
'995664',
'336028',
'995667',
'336031'
GROUP BY poh.segment1,
porh.segment1,
porl.line_num,
TRUNC (porh.creation_date),
TRUNC (porh.approved_date),
porh.authorization_status,
papf.full_name,
TRUNC (poh.creation_date),
TRUNC (poh.approved_date),
glcc.segment3,
hr_reports.get_person_name(trunc(sysdate),poa.agent_id),
poh.type_lookup_code;
Your help is much apprciated
Thanks
Edited by: user211 on Jun 21, 2010 11:45 PM
Hi
PR is an internal document so SAP has not provided any Scripts or FOrms for printing the same
Thanks & Regards
Kishore
Similar Messages
-
RECEIVING OPEN INTERFACE TABLE의 STRUCK RECORDS 정보 취합 SCRIPT
제품 : MFG_PO
작성날짜 : 2005-01-27
RECEIVING OPEN INTERFACE TABLE의 STRUCK RECORDS 정보 취합 SCRIPT
=================================================================
PURPOSE
RCV_TRANSACTIONS_INTERFACE table에 있는 struck receipt records의 정보를
취합하여, struck 원인 및 해결에 도움을 줄 수 있다.
(Oracle Purchasing - Version: 11.5.2 to 11.5.9)
Explanation
Receiving Open Interface Tables에 걸려 있는 receipt struck의 source
document의 추가 정보를 어떻게 취합할 수 있을것인가?
(RCV_TRANSACTIONS_INTERFACE)
Source document는 아래 중 하나가 될 수 있다.
* Purchase Order
* Return Material Authorization (RMA)
* Internal Requisition
아래에 소개하는 scripts는 interface tables에 많은 수의 records가 있을때,
많은 수의 records의 정보를 한 번에 취합하길 원할때 사용하면 유용하다.
만약 interface tables에 단지 몇 개의 records만 있다면 Note: 171257.1
- Oracle Procurement (Purchasing)/iProcurement Diagnostic Tests 에 소개
되어져 있는 적당한 diagnostic script를 이용하는편이 낫다.
Example
1.Error가 발생한 Purchase Order receipts의 추가 정보를 취합하는 script:
SELECT SUBSTR(POH.SEGMENT1,1,10) "PO Number",
POR.RELEASE_NUM "Release Num",
POL.LINE_NUM "Line Num",
RTI.INTERFACE_TRANSACTION_ID "Intf Trx Id",
RTI.TRANSACTION_DATE "Trx Date",
RTI.PROCESSING_MODE_CODE "Proc Mode",
RTI.TRANSACTION_STATUS_CODE "Trx Status",
RTI.PROCESSING_STATUS_CODE "Proc Status",
SUBSTR(PIE.ERROR_MESSAGE,1,75) "Error Message",
POH.ORG_ID "Op Unit Id",
RTI.PO_HEADER_ID "PO Hdr Id",
RTI.PO_RELEASE_ID "Rel Id",
RTI.PO_LINE_ID "PO Line Id",
RTI.PO_LINE_LOCATION_ID "Line Loc Id",
RTI.QUANTITY "Intf Qty",
POLL.QUANTITY "Order Qty",
POLL.QUANTITY_RECEIVED "Qty recvd",
POD.QUANTITY_DELIVERED "Qty Delv",
NVL(POLL.CLOSED_CODE,'OPEN') "Closed Code",
OOD.ORGANIZATION_CODE "To Inv Org",
RTI.DESTINATION_TYPE_CODE "Dest Type",
RTI.TRANSACTION_TYPE "Intf Trx Type",
NVL(POLL.QTY_RCV_EXCEPTION_CODE,'NONE') "Qty Exception",
POLL.QTY_RCV_TOLERANCE "Qty Tolerance",
POLL.RECEIVE_CLOSE_TOLERANCE "Receipt Tolerance"
FROM RCV_TRANSACTIONS_INTERFACE RTI,
PO_HEADERS_ALL POH,
PO_RELEASES_ALL POR,
PO_LINES_ALL POL,
PO_LINE_LOCATIONS_ALL POLL,
ORG_ORGANIZATION_DEFINITIONS OOD,
PO_DISTRIBUTIONS_ALL POD,
PO_INTERFACE_ERRORS PIE
WHERE POH.PO_HEADER_ID = RTI.PO_HEADER_ID
AND POR.PO_RELEASE_ID(+) = RTI.PO_RELEASE_ID
AND POL.PO_LINE_ID = RTI.PO_LINE_ID
AND OOD.ORGANIZATION_ID(+) = RTI.TO_ORGANIZATION_ID
AND POLL.LINE_LOCATION_ID = RTI.PO_LINE_LOCATION_ID
AND POD.LINE_LOCATION_ID = POLL.LINE_LOCATION_ID
AND RTI.INTERFACE_TRANSACTION_ID = PIE.INTERFACE_TRANSACTION_ID(+);
2.Error가 발생한 RMA receipts의 추가 정보를 취합하는 script:
SELECT RTI.INTERFACE_TRANSACTION_ID "Interface Transaction ID",
RTI.PROCESSING_STATUS_CODE "Processing Status",
RTI.PROCESSING_MODE_CODE "Processing Mode",
RTI.TRANSACTION_STATUS_CODE "Transaction Status",
RTI.TRANSACTION_TYPE "Transaction Type",
RTI.TRANSACTION_DATE "Transaction Date",
RTI.OE_ORDER_HEADER_ID "Order header Id",
OOH.ORDER_NUMBER "Order Number",
OOH.ORG_ID "Oper Unit Id",
RTI.OE_ORDER_LINE_ID "Order Line Id",
OOL.INVENTORY_ITEM_ID "Order Item",
OOL.FLOW_STATUS_CODE "Line Flow Status Code",
RTI.QUANTITY "Intf Qty",
RTI.UNIT_OF_MEASURE "Intf UOM",
OOL.ORDERED_QUANTITY "Qty Ordered",
OOL.SHIPPED_QUANTITY "Qty Shipped",
OOL.FULFILLED_QUANTITY "Qty Fulfilled",
OOL.OPEN_FLAG "Open Flag",
OOL.CANCELLED_FLAG "Cancelled",
WH.ORGANIZATION_CODE||' - '||WH.ORGANIZATION_NAME
"Ship To Organization",
WH1.ORGANIZATION_CODE||' - '||WH1.ORGANIZATION_NAME
"Ship From Organization",
OOL.BOOKED_FLAG "Booked",
SUBSTR(PIE.ERROR_MESSAGE,1,75) "Error Message"
FROM RCV_TRANSACTIONS_INTERFACE RTI,
OE_ORDER_LINES_ALL OOL,
OE_ORDER_HEADERS_ALL OOH,
ORG_ORGANIZATION_DEFINITIONS WH,
ORG_ORGANIZATION_DEFINITIONS WH1,
PO_INTERFACE_ERRORS PIE
WHERE OOL.HEADER_ID = RTI.OE_ORDER_HEADER_ID
AND OOL.LINE_CATEGORY_CODE = 'RETURN'
AND OOL.LINE_ID = RTI.OE_ORDER_LINE_ID
AND OOH.HEADER_ID = RTI.OE_ORDER_HEADER_ID
AND OOL.SHIP_TO_ORG_ID = WH.ORGANIZATION_ID(+)
AND OOL.SHIP_FROM_ORG_ID = WH1.ORGANIZATION_ID(+)
AND RTI.INTERFACE_TRANSACTION_ID = PIE.INTERFACE_TRANSACTION_ID(+)
ORDER BY RTI.INTERFACE_TRANSACTION_ID;
3.Error가 발생한 Internal Requisition receipts의 추가 정보를 취합하는
script:
SELECT RTI.RECEIPT_SOURCE_CODE "Receipt Source Code",
RTI.REQUISITION_LINE_ID "Intf Req Line Id",
RTI.SHIPMENT_HEADER_ID "Ship Hdr Id",
RTI.SHIPMENT_LINE_ID "Ship Line Id",
RTI.ITEM_ID "Item Id",
RTI.QUANTITY "Intf Qty",
RTI.UNIT_OF_MEASURE "UOM",
RTI.FROM_ORGANIZATION_ID "From Org Id",
RTI.TO_ORGANIZATION_ID "To Org id",
PRH.REQUISITION_HEADER_ID "Req Hdr Id",
PRH.SEGMENT1 "Req Num",
PRL.REQUISITION_LINE_ID "Req Line Id",
NVL(PRL.QUANTITY_DELIVERED,0) "Qty Delv",
NVL(PRL.QUANTITY_CANCELLED,0) "Qty Canc",
PRL.QUANTITY "Qty Ordered",
PRL.QUANTITY - (nvl(PRL.QUANTITY_CANCELLED,0) +
NVL(PRL.QUANTITY_DELIVERED,0))"Qty Remaining",
PRL.SOURCE_TYPE_CODE "Source Type",
PRH.TRANSFERRED_TO_OE_FLAG "XFR to OE Flag",
NVL(PRL.CANCEL_FLAG,'N') "Cancelled",
NVL(PRL.CLOSED_CODE,'OPEN') "Closed Code",
LIN.LINE_ID "ISO Line Id",
NVL(LIN.ORDERED_QUANTITY,0) "ISO Line Qty",
NVL(LIN.SHIPPED_QUANTITY,0) "ISO Ship Qty",
NVL(FULFILLED_QUANTITY,0) "ISO Fulfilled Qty",
NVL(LIN.CANCELLED_QUANTITY,0) "ISO Cancelled Qty",
NVL(LIN.OPEN_FLAG,'N') "ISO Line Open",
NVL(LIN.BOOKED_FLAG,'N') "ISO Line Booked",
NVL(LIN.CANCELLED_FLAG,'N') "ISO Line Cancelled",
OOH.ORDER_NUMBER "ISO Order Number",
PIE.COLUMN_NAME "Intf Column",
SUBSTR(PIE.ERROR_MESSAGE,1,75) "Error Message"
FROM RCV_TRANSACTIONS_INTERFACE RTI,
PO_REQUISITION_HEADERS_ALL PRH,
PO_REQUISITION_LINES_ALL PRL,
PO_INTERFACE_ERRORS PIE,
OE_ORDER_LINES_ALL LIN,
OE_ORDER_HEADERS_ALL OOH
WHERE PRL.REQUISITION_HEADER_ID = PRH.REQUISITION_HEADER_ID
AND RTI.REQUISITION_LINE_ID = PRL.REQUISITION_LINE_ID
AND LIN.SOURCE_DOCUMENT_ID = PRH.REQUISITION_HEADER_ID
AND LIN.SOURCE_DOCUMENT_LINE_ID = PRL.REQUISITION_LINE_ID
AND LIN.SOURCE_DOCUMENT_TYPE_ID = 10 --Internal Requisition
AND OOH.HEADER_ID = LIN.HEADER_ID
AND PIE.INTERFACE_TRANSACTION_ID(+) = RTI.INTERFACE_TRANSACTION_ID
ORDER by PRH.SEGMENT1;
Reference Documents
Note 263368.1Any suggestion/advise please!
Thanks,
Genoo -
Pre-requisite checker script for EBS R12 and R12.1
hi
is it possible to make a pre-requisite checker script (in perl or shell) for EBS R12 and R12.1 in RHEL5 or sun OS??
can anyone help / guide me to do so??
rgrdsI don't know about EBS R12, but apparently the Oracle Universal Installer can use options to just run the prerequisite checks without having to install the product.
E.g. /runInstaller -prereqChecker or -executeSysPrereqs
There is also a specific OTN forum available for installing E-Business suite:
LCM: 11i Install/Upgrade -
Scripts for Purchase Requisition
Hi
Kindly suggest is there any SAP standard Scripts for PR print preview
Like PO print preview, our client requires PR print preview
Regards
Amuthan MHi
PR is an internal document so SAP has not provided any Scripts or FOrms for printing the same
Thanks & Regards
Kishore -
Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64
Hi Guys,
For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
But when I try to check Pre-requisite from command line, everything seems to be ok.
This is what the output...
$ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "sph1erp"
Destination Node Reachable?
sph1erp yes
sph2erp yes
Result: Node reachability check passed from node "sph1erp"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
sph2erp passed
sph1erp passed
Result: User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
sph2erp passed
sph1erp passed
Verification of the hosts config file successful
Interface information for node "sph2erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
Interface information for node "sph1erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
Check: Node connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
Result: TCP connectivity check passed for subnet "10.10.16.48"
Check: Node connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
Result: TCP connectivity check passed for subnet "10.10.0.0"
Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
sph2erp lan900:10.10.1.174
sph1erp lan900:10.10.1.173
Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
sph2erp lan2:10.10.16.51
sph1erp lan2:10.10.16.50
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
Result: Swap space check passed
Check: Free disk space for "sph2erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph2erp /var 13.8074GB 1GB passed
Result: Free disk space check passed for "sph2erp:/var/tmp/"
Check: Free disk space for "sph1erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph1erp /var 13.8158GB 1GB passed
Result: Free disk space check passed for "sph1erp:/var/tmp/"
Check: User existence for "oracle"
Node Name Status Comment
sph2erp exists(199) passed
sph1erp exists(199) passed
Checking for multiple users with UID value 199
Result: Check for multiple users with UID value 199 passed
Result: User existence check passed for "oracle"
Check: Group existence for "oinstall"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "dba"
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
sph2erp yes yes yes yes passed
sph1erp yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
Check: Membership of user "oracle" in group "dba"
Node Name User Exists Group Exists User in Group Comment
sph2erp yes yes yes passed
sph1erp yes yes yes passed
Result: Membership check for user "oracle" in group "dba" passed
Check: Run level
Node Name run level Required Comment
sph2erp 3 3 passed
sph1erp 3 3 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp hard 63488 63488 passed
sph1erp hard 63488 63488 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp soft 1024 1024 passed
sph1erp soft 63488 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp hard 3687 3686 passed
sph1erp hard 3687 3686 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp soft 3687 2047 passed
sph1erp soft 3687 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Comment
sph2erp ia64 ia64 passed
sph1erp ia64 ia64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Comment
sph2erp HP-UX B.11.31 B.11.31 passed
sph1erp HP-UX B.11.31 B.11.31 passed
Result: Kernel version check passed
Check: Kernel parameter for "ksi_alloc_max"
Node Name Configured Required Comment
sph2erp 32768 32768 passed
sph1erp 32768 32768 passed
Result: Kernel parameter check passed for "ksi_alloc_max"
Check: Kernel parameter for "executable_stack"
Node Name Configured Required Comment
sph2erp 0 0 passed
sph1erp 0 0 passed
Result: Kernel parameter check passed for "executable_stack"
Check: Kernel parameter for "max_thread_proc"
Node Name Configured Required Comment
sph2erp 1024 1024 passed
sph1erp 1024 1024 passed
Result: Kernel parameter check passed for "max_thread_proc"
Check: Kernel parameter for "maxdsiz"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxdsiz"
Check: Kernel parameter for "maxdsiz_64bit"
Node Name Configured Required Comment
sph2erp 2147483648 2147483648 passed
sph1erp 2147483648 2147483648 passed
Result: Kernel parameter check passed for "maxdsiz_64bit"
Check: Kernel parameter for "maxssiz"
Node Name Configured Required Comment
sph2erp 134217728 134217728 passed
sph1erp 134217728 134217728 passed
Result: Kernel parameter check passed for "maxssiz"
Check: Kernel parameter for "maxssiz_64bit"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxssiz_64bit"
Check: Kernel parameter for "maxuprc"
Node Name Configured Required Comment
sph2erp 3686 3686 passed
sph1erp 3686 3686 passed
Result: Kernel parameter check passed for "maxuprc"
Check: Kernel parameter for "msgmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgmni"
Check: Kernel parameter for "msgtql"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgtql"
Check: Kernel parameter for "ncsize"
Node Name Configured Required Comment
sph2erp 35840 35840 passed
sph1erp 35840 35840 passed
Result: Kernel parameter check passed for "ncsize"
Check: Kernel parameter for "shmmax"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmseg"
Node Name Configured Required Comment
sph2erp 512 512 passed
sph1erp 512 512 passed
Result: Kernel parameter check passed for "shmseg"
Check: Kernel parameter for "tcp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "tcp_smallest_anon_port"
Check: Kernel parameter for "tcp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "tcp_largest_anon_port"
Check: Kernel parameter for "udp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "udp_smallest_anon_port"
Check: Kernel parameter for "udp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "udp_largest_anon_port"
Check: Package existence for "OS-Core-B.11.31( ia64)"
Node Name Available Required Comment
sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
Check: Operating system patch for "Patch PHKL_38938"
Node Name Applied Required Comment
sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
Result: Operating system patch check passed for "Patch PHKL_38938"
Check: Operating system patch for "Patch PHKL_39351"
Node Name Applied Required Comment
sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
Result: Operating system patch check passed for "Patch PHKL_39351"
Check: Operating system patch for "Patch PHSS_36354"
Node Name Applied Required Comment
sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
Result: Operating system patch check passed for "Patch PHSS_36354"
Check: Operating system patch for "Patch PHSS_37042"
Node Name Applied Required Comment
sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
Result: Operating system patch check passed for "Patch PHSS_37042"
Check: Operating system patch for "Patch PHSS_37959"
Node Name Applied Required Comment
sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
Result: Operating system patch check passed for "Patch PHSS_37959"
Check: Operating system patch for "Patch PHSS_39094"
Node Name Applied Required Comment
sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
Result: Operating system patch check passed for "Patch PHSS_39094"
Check: Operating system patch for "Patch PHSS_39100"
Node Name Applied Required Comment
sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
Result: Operating system patch check passed for "Patch PHSS_39100"
Check: Operating system patch for "Patch PHSS_39102"
Node Name Applied Required Comment
sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
Result: Operating system patch check passed for "Patch PHSS_39102"
Check: Operating system patch for "Patch PHSS_38141"
Node Name Applied Required Comment
sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
Result: Operating system patch check passed for "Patch PHSS_38141"
Check: Operating system patch for "Patch PHCO_40381"
Node Name Applied Required Comment
sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
Result: Operating system patch check passed for "Patch PHCO_40381"
Check: Operating system patch for "Patch PHKL_38038"
Node Name Applied Required Comment
sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
Result: Operating system patch check passed for "Patch PHKL_38038"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
No NTP Daemons or Services were found to be running
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
sph2erp does not exist passed
sph1erp does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
sph2erp 022 0022 passed
sph1erp 022 0022 passed
Result: Default user file creation mask check passed
Checking consistency of file "/etc/resolv.conf" across nodes
Node Name Status
sph2erp passed
sph1erp passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
File "/etc/resolv.conf" is consistent across nodes
Check: Time zone consistency
Result: Time zone consistency check passed
Checking settings of device file "/dev/async"
Node Name Available Comment
sph2erp yes failed (incorrect setting for minor number.)
sph1erp yes failed (incorrect setting for minor number.)
Result: Check for settings of device file "/dev/async" failed.
Starting check for The SSH LoginGraceTime setting ...
WARNING:
PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
Check for The SSH LoginGraceTime setting passed
Fixup information has been generated for following node(s):
sph2erp,sph1erp
Please run the following script on each node as "root" user to execute the fixups:
'/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
Pre-check for cluster services setup was unsuccessful on all the nodes.
What could be the issue ????
Any help would be appreciated...
Regards,
ManishStarted with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
sph1erp:/oracle/11.2.0/grid #sh root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
ASM created and started successfully.
Disk Group OCRVOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
Successfully replaced voting disk group with +OCRVOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
Located 5 voting disk(s).
Start of resource "ora.cluster_interconnect.haip" failed
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Clusterware stack
Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
/oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
sph1erp:/oracle/11.2.0/grid #
Last few lines from CRS Log for node 1, where error came
[ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
2011-02-25 23:04:16.491
[oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
2011-02-25 23:04:20.521
[ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
*/oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
=====================================================================================================
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
2011-02-25 23:04:17.892: [ AGENT][12] {0:0:178} UserErrorException: Locale is
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
2011-02-25 23:04:17.893: [ AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
owing error:
Start action for HAIP aborted
] for start for resource: ora.cluster_interconnect.haip 1 1
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
2011-02-25 23:04:17.894: [ AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
2011-02-25 23:04:19.573: [ AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
2011-02-25 23:04:20.511: [ AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
2011-02-25 23:04:20.517: [ AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
[ CLWAL][8]clsw_Initialize: OLR initlevel [70000]
Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
=====================================================================================================
2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
2011-02-25 23:04:26.994: [ CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
2011-02-25 23:04:32.334: [ CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
2011-02-25 23:04:37.704: [ CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
What could be the issue ????
Experts Please help me. Doing setup for the PRoduction Env...
Do response ASAP...... Thanks
Regards,
Manish -
==============>deploy log information:
2015-04-27_14-50-42:INFO:Install Args AGENT_PORT=3872
2015-04-27_14-50-42:INFO:Action description 在主机 expquery03 上执行命令 /bin/sh -c '/u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872'
2015-04-27_14-50-42:INFO:Attempt :1 pty required false with no inputs
2015-04-27_15-11-47:INFO:/bin/sh -c '/u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872' execution failed on host expquery03
2015-04-27_15-11-47:INFO:Pattern ERROR: found in file /opt/app/oem12c/gc_inst/em/EMGC_OMS1/sysman/agentpush/2015-04-27_14-18-30-PM/logs/expquery03/install.log Line ERROR: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO:Error Message found Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO: ACTION 在主机 expquery03 上执行命令 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872
2015-04-27_15-11-47:INFO: OUT null
2015-04-27_15-11-47:INFO: ERR Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO: EXIT CODE1
2015-04-27_15-11-47:INFO:InvocationTargetException Exception
2015-04-27_15-11-47:INFO:Printing Exception :java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.executeActions(BaseDeployerOps.java:1924)
at oracle.sysman.core.agentpush.ui.deployer.NewAgentDeployer.deploy(NewAgentDeployer.java:59)
at oracle.sysman.core.agentpush.ui.deployfwk.DeploymentWorker.run(DeploymentWorker.java:26)
at oracle.sysman.util.threadPoolManager.WorkerThread.run(Worker.java:311)
Caused by: CommandException: err: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install. out: null exitcode: 1
stacktrace:
null
at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractive(DeployerOps.java:1204)
at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractive(DeployerOps.java:1050)
at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:644)
at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:593)
at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.doInstall(BaseDeployerOps.java:484)
oem@oragc12c bin]$ more /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log
/u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log: No such file or directory
[oem@oragc12c bin]$ more /opt/app/oem12c/gc_inst/em/EMGC_OMS1/sysman/agentpush/2015-04-27_14-18-30-PM/logs/expquery03/install.log
-e Validating the OMS_HOST & EM_UPLOAD_PORT
Executing command : /u01/app/agent_12c/core/12.1.0.4.0/jdk/bin/java -classpath /u01/app/agent_12c/core/12.1.0.4.0/jlib/agentInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/OraInstaller.jar oracle.s
ysman.agent.installer.AgentInstaller /u01/app/agent_12c/core/12.1.0.4.0 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM /u01/app/agent_12c -prereq
Validating oms host & port with url: http://oragc12c.yto.net.cn:4903/empbs/genwallet
Validating oms host & port with url: https://oragc12c.yto.net.cn:4903/empbs/genwalletReturn status:3-oms https port is passedUnzipping the agentcoreimage.zip to /u01/app/agent_12c ....12.1.0.4.0_PluginsOneof
fs_197.zip
Executing command : /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/unzip -o /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/12.1.0.4.0_PluginsOneoffs_197.zip -d /u01/app/agent_12cExecuting command : /u01/
app/agent_12c/core/12.1.0.4.0/jdk/bin/java -d64 -classpath /u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/OraInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/xmlparserv2.jar:/u01/app/agent_12c/core/12
.1.0.4.0/oui/jlib/srvm.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/emCfg.jar:/u01/app/agent_12c/core/12.1.0.4.0/jlib/agentInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/share.jar oracle.sysman
.agent.installer.AgentInstaller /u01/app/agent_12c/core/12.1.0.4.0 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM /u01/app/agent_12c /u01/app/agent_12c/agent_inst AGENT_BASE_DIR=/u01/app/agent_12c
Failed to read the inventory
Failed to read the inventory=====================>but the inventory no problem
Cloning the agent home...
Executing command: /u01/app/agent_12c/core/12.1.0.4.0/oui/bin/runInstaller -debug -ignoreSysPrereqs -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/u01/app/agent_12c/core/12.1.0.4.0 AG
ENT_BASE_DIR=/u01/app/agent_12c ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=f
alse b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872 -noconfig ORACLE_HOME_NAME=agent12c1 -force b_noUpgrade=true
ERROR: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
Agent Deploy Log Location:/u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log
============>agent client privage and "/tmp" information at hp-unix
$ bdf
Filesystem kbytes used avail %used Mounted on
/dev/vg00/lvol3 5242880 384784 4820160 7% /
/dev/vg00/lvol1 1835008 376272 1447400 21% /stand
/dev/vg00/lvol7 20971520 8977200 11902024 43% /var
/dev/vg00/lvol9 7864320 3213136 4614904 41% /usr
/dev/vg00/lvol6 85983232 63055260 21527575 75% /u01
/dev/vg00/lvol5 10485760 2268216 8153768 22% /tmp===============>
/dev/vg00/lvol8 10354688 6536024 3788952 63% /opt
/dev/vg00/lvol4 52428800 13319488 38803816 26% /home
$ ls -lt
total 6
drwxr-xr-x 2 oem oinstall 1024 Apr 27 15:14 agent_12c
drwxrwx--- 5 grid oinstall 1024 Apr 27 15:11 oraInventory
drwxr-xr-x 3 oem oinstall 96 Apr 22 16:16 agent
drwxrwxr-x 8 grid oinstall 1024 Apr 21 14:58 grid
drwxrwxr-x 6 grid oinstall 96 Aug 7 2013 oracle
drwxr-xr-x 3 root oinstall 96 Aug 2 2013 11.2.0
$ cd oraInventory
$ ls -lt
total 44
drwxrwx--- 2 grid oinstall 16384 Apr 27 15:10 logs
drwxrwx--- 3 grid oinstall 2048 Apr 22 10:36 backup
drwxrwx--- 2 grid oinstall 1024 Apr 3 2014 ContentsXML
-rwxrwx--- 1 grid oinstall 1686 Aug 6 2013 orainstRoot.sh
-rw-rw---- 1 grid oinstall 56 Aug 6 2013 oraInst.loc
$ cd ContentsXML
$ ls
comps.xml inventory.xml libs.xml
$ ls -lt
total 6
-rw-rw---- 1 grid oinstall 842 Apr 21 10:31 inventory.xml
-rw-rw---- 1 grid oinstall 329 Apr 20 17:32 comps.xml
-rw-rw---- 1 grid oinstall 292 Apr 20 17:32 libs.xml
I view some oms document ,don't know the caseagent client's apeloy log:
$ more /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_16-22-23-PM.log
INFO: /u01/app/agent_12c/core/12.1.0.4.0
INFO: /u01/app/agent_12c/ADATMP_2015-04-27_15-33-29-PM
INFO: /u01/app/agent_12c
INFO: /u01/app/agent_12c/agent_inst
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: -ignorePrereqs
INFO: ORACLE_HOSTNAME=expquery03
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: OMS_HOST=oragc12c.yto.net.cn
INFO: EM_UPLOAD_PORT=4903
INFO: AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst
INFO: b_doDiscovery=false
INFO: b_startAgent=false
INFO: b_forceInstCheck=true
INFO: AGENT_PORT=3872
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: ORACLE_HOSTNAME=expquery03
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: OMS_HOST=oragc12c.yto.net.cn
INFO: EM_UPLOAD_PORT=4903
INFO: AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst
INFO: b_doDiscovery=false
INFO: b_startAgent=false
INFO: b_forceInstCheck=true
INFO: AGENT_PORT=3872
INFO: Setting the system property ORACLE_HOSTNAME to:expquery03
INFO: Setting the system property oracle.installer.oui_loc to:/u01/app/agent_12c/core/12.1.0.4.0/oui
INFO: Agent Base Directory is : /u01/app/agent_12c
INFO: Agent Home is : /u01/app/agent_12c/core/12.1.0.4.0
INFO: Sbin Home is : /u01/app/agent_12c/sbin
INFO: Logs Location is : /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy
SEVERE: User has specified -ignorePrereqs when invoking the installer. All pre-requisite checks will be ignored for this installation session. Configuration failures may result if proper pre-requisites are
not satisfied.
INFO:
Setting system property CUSTOM_INVENTORY to /u01/app/oraInventory
INFO: Clone start time:2015-04-27_16-22-24-PM
INFO: Executing command: /u01/app/agent_12c/core/12.1.0.4.0/oui/bin/runInstaller -debug -ignoreSysPrereqs -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/u01/app/agent_12c/core/12.1.0.4.
0 -noconfig ORACLE_HOME_NAME=agent12c1 -force
INFO: Starting Oracle Universal Installer...
INFO:
INFO: Checking swap space: must be greater than 500 MB. Actual 61440 MB Passed
INFO: Preparing to launch Oracle Universal Installer from /tmp/OraInstall2015-04-27_04-22-24PM. Please wait ...Oracle Universal Installer, Version 11.1.0.12.0 Production
INFO: Copyright (C) 1999, 2014, Oracle. All rights reserved.
INFO:
INFO: org.xml.sax.SAXParseException: <Line 1, Column 38>: XML-20100: (Fatal Error) Expected '?>'.
INFO: at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
INFO: at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
INFO: at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:345)
INFO: at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:307)
INFO: at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:212)
INFO: at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:150)
INFO: at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:88)
INFO: at oracle.sysman.oii.oiii.OiiiInstallInventory.readHomes(OiiiInstallInventory.java:708)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadPartialInstallInv(OiiiInstallAreaControl.java:766)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initInstallInv(OiiiInstallAreaControl.java:811)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadInstallInventory(OiiiInstallAreaControl.java:582)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1965)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1929)
INFO: at oracle.sysman.oii.oiic.OiicCloneSession.setAreaControls(OiicCloneSession.java:1309)
INFO: at oracle.sysman.oii.oiic.OiicCloneSession.<init>(OiicCloneSession.java:932)
INFO: at oracle.sysman.oii.oiic.OiicSessionWrapper.createNewSession(OiicSessionWrapper.java:878)
INFO: at oracle.sysman.oii.oiic.OiicSessionWrapper.<init>(OiicSessionWrapper.java:189)
INFO: at oracle.sysman.oii.oiic.OiicInstaller.init(OiicInstaller.java:511)
INFO: at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:967)
INFO: at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
INFO: org.xml.sax.SAXParseException: <Line 1, Column 38>: XML-20100: (Fatal Error) Expected '?>'.
INFO: at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
INFO: at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
INFO: at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:345)
INFO: at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:307)
INFO: at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:212)
INFO: at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:150)
INFO: at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:88)
INFO: at oracle.sysman.oii.oiii.OiiiInstallInventory.readHomes(OiiiInstallInventory.java:708)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadPartialInstallInv(OiiiInstallAreaControl.java:766)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initInstallInv(OiiiInstallAreaControl.java:811)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadInstallInventory(OiiiInstallAreaControl.java:582)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1965)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1929)
INFO: at oracle.sysman.oii.oiic.OiicCloneSession.setAreaControls(OiicCloneSession.java:1309)
INFO: at oracle.sysman.oii.oiic.OiicCloneSession.<init>(OiicCloneSession.java:932)
INFO: at oracle.sysman.oii.oiic.OiicSessionWrapper.createNewSession(OiicSessionWrapper.java:878)
INFO: at oracle.sysman.oii.oiic.OiicSessionWrapper.<init>(OiicSessionWrapper.java:189)
INFO: at oracle.sysman.oii.oiic.OiicInstaller.init(OiicInstaller.java:511)
INFO: at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:967)
INFO: at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
INFO: OUI-10053:Unable to generate temporary script: /tmp/orainstRoot.sh. Unable to continue install.
INFO: SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
INFO: Plugin homes:
INFO:
INFO: LD_LIBRARY_PATH environment variable :
INFO: -------------------------------------------------------
INFO: Total args: 42
INFO: Command line argument array elements ...
INFO: Arg:0:/tmp/OraInstall2015-04-27_04-22-24PM/jre/bin/java:
INFO: Arg:1:-Doracle.installer.library_loc=/tmp/OraInstall2015-04-27_04-22-24PM/oui/lib/hpia64:
INFO: Arg:2:-Doracle.installer.oui_loc=/tmp/OraInstall2015-04-27_04-22-24PM/oui:
INFO: Arg:3:-Doracle.installer.bootstrap=TRUE:
INFO: Arg:4:-Doracle.installer.startup_location=/u01/app/agent_12c/core/12.1.0.4.0/oui/bin:
INFO: Arg:5:-Doracle.installer.jre_loc=../../jre:
INFO: Arg:6:-Doracle.installer.nlsEnabled="TRUE":
INFO: Arg:7:-Doracle.installer.prereqConfigLoc= :
INFO: Arg:8:-Doracle.installer.unixVersion=B.11.31:
INFO: Arg:9:-d64:
INFO: Arg:10:-mx96m: -
Standard Smartform printing purchase requisition through - ME51N / ME52N
Hi Experts,
we are trying to build functionality to print Purchase requisition through transaction ME51N / ME52N / ME53N. we have created a print button on Customer data screen for that. Now we are looking for any standard smartform or script which can be used for printing Purchase requisition.
Please provide me some pointers for the same.
There is print button avalable at item level of purchase requisition. but it will not print header records. i am not able to find this form in system also. how can i find this form?
thanks>
rajpal sehrawat wrote:
> Hi,
>
>
> Header records means we might provide some header level information like PR number , short text and logo. Currently we are able to print only line items present in the ALV grid.
>
>
> we are looking for some similar form which can be enhanced.
>
>
> thanks
actually the PR number is a line item field - it comes out of table EBAN. You would have to store the logo someplace else, since it does not belong to the PR (EBAN) -> neither header nor item, but is 'simply' graphics stored elsewhere in the database.
I wouldn't know of any form in MM-PUR which you could easily adapt to printing PRs (and have never before heard of the need to print them) - so you will have to do a custom abap. Since there is no possibility to maintain NACE for PRs (it's simply not available) - I wouldn't know where you could use a smartform/sapscript ... that custom abap is all you can do ... -
Alert not firing for SQL Statement Script
Hi All,
I have defined an alter which will trigger when a requisition is stuck with the requestor.
At the time i need to send an email to the requestor and update the status of the requisition to 'INCOMPLETE'.
i have defined two action sets one for email and another for update. The email part is working fine but the sql script which updates the status is not firing.
It is a standard script residing in PO directory sql.
It has two parameters
1) Requisition number 2) org_id
these two are the output of the mail alert query.
i have defined the application as 'Puchasing'
arguments as &SQL_REQ_NUMBER &SQL_ORG_ID
and gave the file name 'poresreq.sql' in the file location.
but the status is not updating.
how can i know the reason for not firing.
Regards,
JanaHi Jana;
What is your EBS and OS? Did you run query manualy? Did you get any error message?
Regard
Helios -
New-testcasconnectivityuser and test-outlookconnectivity script
I am getting 2 users in AD called extest_xxxxxxxx
How did this get created and can i delete it?
I did see on my exchange server under
D:\Program Files\Microsoft\Exchange Server\V14\Scripts
new-testcasconnectivityuser.ps1 is there.
Is it ok to delete extest_xxxx accounts from AD?Hi,
From my point of view, the account is used to test connetivity for CAS. If you want to delete the account, then we may need to also disable those corresponding monitors or rules that use this account.
A pre-requisite for the Exchange 2010 Management Pack is that a test mailbox account be setup for synthetic transactions using an existing Exchange 2010 powershell script that comes bundled with the Exchange 2010 installation called: 'New-TestCasConnectivityUser.Ps1'.
More details:
http://kevingreeneitblog.blogspot.com/2011/06/scom-and-exchange-test-cas-connectivity.html
Regards,
Yan Li
Regards, Yan Li -
Change Purchase Requisition Price after assigned to Quotation
Hello.
I created purchase requisition and assigned to Quotation.
It if possible change purchase requisition price when is already assigned to Quotation?
The item price is display and don't let me apply changes.
Regards,
Hector.Hello.
I did not converted the Purchase Requsition in Purchase Order.
I just running a Test Script, and after assigned a Quotation, the vendor sent me some price changes.
When I call the requisition, the system don't let me change any price.
I believe there is a good reason for that, but I need to read it.
If anyone knows any documentation available, please let me know. -
Developed Sap scripts of invoice documents
hi,
how to Developed Sap scripts of invoice documents, purchase requisition documents and purchase order documents to suit client needs.if understand any one give me one example.you have standard one.
invoice --- RVINVOICE01.
U CAN FIND ALL IN TNAPR TABLE.
U NEED TO CHANGE THOSE AS PER CLIENT REQUIREMENT.
REGARDS.
SANTHOSH REDDY -
Need to reset Purchase Requisition
Dear All,
I am new to Oracle EBS i just want to know the script which can reset the WorkFlow for Purchase Requisition.
I am know about the Purchase Order script which can reset the WorkFlow poxrespo.sql.
Thanks
RehanSee if these can help
Troubleshooting for Requisitions / Purchase Orders in Process or Pre-Approved Status [Document 225017.1]
How to Diagnose Purchasing Document Approval Routing [Document 603232.1]
All Purchase Orders or Requisitions Getting Stuck in Pre-Approved or In Process Status - Troubleshooting Checklist [Document 1104843.1]
Mahendra -
Cancel PO Requisition through interface
Hi,
Is it possible to Cancel a Requisition through the Open interface or API
Many thanks.
BrianHi Brain;
Pelase check below thread
PO line cancellation issue
PO line cancellation issue
Script to cancel PO Requisition
http://arunrathod.blogspot.com/2010/09/script-to-cancel-po-requisition.html
Regard
Helios -
Hello Experts,
I would like create test script for Billing.Since i have no clue about test script coz in my previous organization we have not made any script for testing.Now i would like to create testing for Billing.
Could you all explain me what are the pre - requisites for testing only for Billing.
What are the different ways for testing to perform since i have never worked on testing on documentations.
Your reply would appreciate.
Thanks
Shri...Test script is nothing but unit testing through which you list down the steps that are needed to execute a test case and record the results.
In your case, since you wanted a test script for billing, first you need to identify the different types of billing documents configured in production client. For each and every billing document type, you need to create a test document and record in the following format
Test Scenario No.
Scenario:::Billing
No.::TCode:::Description:::Input Data:::Output Data:::Remarks (OK/Error)
We call this process as ASAP Methodology. The prescribed format you can get in service market place.
thanks
G. Lakshmipathi -
Starting a service automatically from a validation script
Is it possible to start off a service from a javascript running on the page or as part of form validation ?
When the user is filling out a form, based on the form field validation script I want to be able to invoke a new service. The javascript could also be a page validation script, and so I could do the same validation based on DOM. Bottom line is that I am seeking a way to launch a service and have the service form presented to the browser where this javascript is running.
Thanks.The approach might depend a bit on your use case but one way is to submit a request through the Requisition API (RAPI) through a JavaScript XHR HTTP POST, I believe a similar technique is used in some of the IAC portlets to submit services such as Power Up and Power Down without launching an order form.
The Requisition API is documented in the IntegrationGuide but you can access the WSDL under the following url: http://<ServerName>/RequestCenter/webservices/wsdl/RequisitionService.wsdl
Alternatively, if you just want to show a new order form in a popup, you can make use of the GreyBox library that is loaded using the GB_showFullScreen function to launch a service in a popup window, to achieve this though you would need to know the service ID to enter in the URL.
Hope this helps.
Maybe you are looking for
-
Runtime error while executing New Hire action in PA40
Hi All,i am getting short dump while executing PA40 for new hire action typecan anyone look into this and guide as i am new to HCMNote: getting dump only for one user id for rest all other user id i am not getting dump. Category ABAP Pr
-
How do I print in black and white?
I have a HP Photosmart C4480 (all-in-one). I try to print a PDF in black and white, the printer prints in color regardless if I choose color print or black and white. How can I fix this?
-
What can i do for removing SINGLE in this select query??
What can i do for removing SINGLE in this select query given below and also NOT USE 'ENDSELECT'?? I have defined g_t_zv7_cachemapping as following :: DATA : BEGIN OF g_t_zv7_cachemapping OCCURS 0, kostl LIKE zv7_cachemapping-kostl,
-
Real simple question, please!
I want to record podcasts on my G5 (with or without the built in mike) but want to use theme music which I own (purchased, commissioned) as an intro and then again at the end when I'm done. Is there an idiot proof software that lets me do this with n
-
ADO recordset not working properly after upgrade to 11g
Hi , I am facing a very weird issue , i am running a sql using the ADO recordset , but i get only one column value in the recordset. Other columns values are coming as Null. Using as below : Set objConnection=Createobject("ADODB.Connection") 'connect