Resetting the limit on result section in Hyperion IR 9.3.1

Hi All,
I am having a limit of computed item on result section which is reset with code to make this limit Ignore = "True" or "False". Report is saved as no data for result section. Now whenever i open up the report i am getting an internal error for not able to reset the limit of computed item as no data is there on result section.
When i am saving the report section with data it is working fine.
Can anyone please suggest how to handle the limit of computed item on result section when there is no data available on result section?
Thanks in advance.
Ujjawal
Edited by: [email protected] on Mar 30, 2009 7:08 AM

Try if this works...
if (ActiveDocument.Sections["Results"].RowCount != 0)
ActiveDocument.Sections["Results"].Limits["Computed"].Ignore=TRUE /* or FALSE */
Edited by: Shashi G on Mar 31, 2009 5:57 AM

Similar Messages

How delete account or reset the limit of account authorize

after i authorize my iPhone 3GS& iPad to my Desktop & Laptop, my limit only left 1 time.
is't posible to delete the apple account and re-create, or reset the limit of account authorize?

Click here and follow the Deauthorize All instructions.
(60114)

HT1338 I want to print via my orang livebox through a cannon mp210 printer/scanner. Orange and Apple information suggests this can be done. I have attached the USB cable to the livebox and printer, reset the livebox no result. installed printer cd on imac

How do I print wirelessly via a cannon mp210 printer/scanner. I have followed guidance re-routing the USB from PC to livebox and printer, reset the livebox and installed printer drivers on the imac to no avail.

How do I print wirelessly via a cannon mp210 printer/scanner. I have followed guidance re-routing the USB from PC to livebox and printer, reset the livebox and installed printer drivers on the imac to no avail.

My mcbook is not conecting to internet. I have some conection in Utorrent but pages are not being displayed in my browsers (chrome and firefox). If I reset the SMC i can get results from google but no other page loads. i get ERR_NAME_NOT_RESOLVED.

My Mcbook cant find the host. I get some conection because my Utorrent has some donwload activity, but when I attempt to open any page i just get a time out and ERR_NAME_NOT_RESOLVED. If i reset the SMC by removing the battery, google loads perfectly and it gives me search results without any problem. But when I click on any link, or attempt to enter a direct URL it gives me the error mentioned before.
I restarted the modem, changed the DNS, deactivate the firewall, conect the macbook via ethernet, change the IP, and nothing seems to work. This issue happened the first time i tried to conect to internet in a different country. Internet works fine in any other laptop or mobile device.
When using the assistant to run a diagnosis on the network, i get the first 4 items (wifi, wifi adjustments, network adjustments and internet provider) with a green light, and the other two (internet and server) with yelow lights (sometmes red light).
When i tried to connect the first time, i had a OS X 6.8 but i upgraded it to Maverick 10.9, since i had already donwnloaded it, and the result was the same.
anyone could help me please?

We usually advice first to Reload web page(s) and bypass the cache in case of such problem and then do a check for extensions to see if any are causing the problem.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Other possible causes can be zooming a page or having increased the minimum font size.
*http://kb.mozillazine.org/Websites_look_wrong

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks

Is there a way to reset the activation limit?

Hi. I originally bought Photoshop CS2 (I guess about 7 years ago), and since then I've upgraded to CS3, and then the CS5 Extended Upgrade. Unfortunately over the years I've had system crashes that required complete reinstalls of Windows, and as a result I have no more "activations". In addition, there's something goofy with the Photoshop CS 5 Extended upgrade application in that although Adobe did offer an upgrade from CS3 to CS5 Extended the installer doesn't recognize the serial number. (Neither the CS2 full product serial number, nor the CS3 upgrade serial number.)
As a result, any time I need to install Photoshop it means I have to call them, and last time (for the CS5 Extended install) it took about an hour on the phone, multiple discussions between the customer support person and their supervisor, etc. I'm at the point where I'm not going to pay for the CS6 upgrade just because I don't want to deal with the hassle of installing it.
Is there some way to get Adobe to "wipe the slate clean" and reset the activations so I can do this all over the net? And does the CS6 installer recognize older serial numbers like CS2 or the CS3 upgrade serial number?

For the installer question I'm wondering if the CS6 Extended installer will work with the serial numbers I have. The CS5 Extended installer didn't.
I have the following serial numbers:
Photoshop CS2 (full application)
Photoshop CS3 (upgrade)
Photoshop CS5 Extended (upgrade)

I am having an issue in PS CS6 (on a Mac) where in the middle of working on a file, it gets corrupted by filling in a grid of squares in my layer masks as well as deleting out those same sections of misc layers throughout the file. I have reset the prefer

I am having an issue in PS CS6 (on a Mac) where in the middle of working on a file, it gets corrupted by filling in a grid of squares in my layer masks as well as deleting out those same sections of misc layers throughout the file. I have reset the preferences, cleaned up the file. Renamed it to another file and 2 weeks later it is doing the same thing. Luckily I had my main subjects as smart objects and it saved them. This second time I just closed it out and opened it again and it is fine. Anybody else have an issue with this? Also it runs really slow these days on my MacBook Pro Retina 2.6 Core i7 with 16gb Ram.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

When I did the upgrade it resulted in a factory reset. Now all of my ringtones are gone from iTunes. Anyone have a solution?

When I did the upgrade it resulted in me having to do a factory reset because it was pausing for long periods of time. It went through the backup and all other steps but now all of my ringtones are gone from iTunes, thus the phone. I tried to redownload one I had purchased and it made me purchase it again (I did this as a test), and it said I had purchased it before but still required me to purchase again.
Anyone have a solution/thoughts/help?

Command + Z undoes the last action you did, did you just move those files into that folder?
Use Spotlight to search for the files, or look for them in their original location(s).
MtD

In Which R/3 Table, the Extraction Date should be RESET to Limit DELTA ???

Hi all,
We have a daily delta extraction setup for DataSource 0FI_GL_4 from R/3 into ODS. I think there is a table on R/3 side where we could RESET the extraction date (?) to limit the delta reload incase something goes wrong with delta process. Without this reset, it may take 2-3 WEEKS for us.
Is any one has any idea about this table , PLEASE....
Thanks.

hi Venkat,
check oss note 485958-BW-BCT-FI: Repeating delta extractions
Symptom
This note provides the option of repeating delta extractions under certain conditions.
The note is valid for the DataSources listed below:
0FI_AP_4 - Accounts Payable: Line Items
0FI_AR_4 - Accounts Receivable: Line Items
0FI_GL_4 - General Ledger: Line Items
0FI_TX_4 Taxes: Line Items
0FI_AP_6 Accounts Payable: Transaction Figures Using Delta Extraction
0FI_AR_6 Accounts Receivable: Transaction Figures Using Delta Extraction
0FI_GL_6 - General Ledger: Transaction Figures Using Delta Extraction
0FI_AP_7 - Accounts Payable: Special G/L Transaction Figures Using Delta Extraction
0FI_AR_7 - Accounts Receivable: Special G/L Transaction Figures Using Delta Extraction
0FI_GL_7 - General Ledger: Cost of Sales Accounting Ledger Using Delta Extraction
0FI_AR_8 - Accounts Receivable: Credit Management: Central Data Using Delta Extraction
0FI_AR_9 - Accounts Receivable: Credit Management: Control Area Data Using Delta Extraction
0FI_AR_10 - Accounts Receivable: Payment History Using Delta Extraction
Other terms
BWOM2_TIMEST, TIMESTAMP, BWOM_SETTINGS, LAST_TS, delta, init
Reason and Prerequisites
For test or correction purposes you require a function to repeat delta extractions.
In the standard system, you can repeat the delta extractions for the last sixty days.
The number of days is defined by the 'DELTIMEST' parameter in the BWOM_SETTINGS table.
For all DataSources mentioned above you can repeat the delta extraction without problems because all DataSources use an ODS object. The system automatically filters out data that is selected several times.
Solution
The solution consists of resetting the time stamps used for the delta extraction in the BWOM2_TIMEST table to a certain date.
To do this, you must reset the 'X' marker in the 'LAST_TS' column for the last successful delta extraction.
The next delta extraction then loads all data created or changed as of this date to the BW system.
To reset the 'X' marker in the 'LAST_TS' column, use the 'BWOM2_TIMEST' report. If the report is not yet available in you system, you can install it as described in Note 836288.
Caution - important note
If you repeat several delta extractions in a run using this note, the number of the extracted records will in most cases be smaller than the total of the individual delta extractions.
This can happen in the following cases:
If documents are contained in several individual delta extractions due to document changes. The system selects these documents only once.
If you have set parameter BWFIOVERLA = X in the BWOM_SETTINGS table. (See Note 485958)
In this case, the upper limit of the period for the data selection is not, as usual, 23:59:59 of the previous day. The system also extracts all existing documents of the current day. These documents are also contained in the following delta extraction.
1. If you can load the expected data volume in one delta extraction, proceed as follows:
Execute the 'BWOM2_TIMEST' report for the relevant DataSource.
Remove the marker in the entry of the last delta extraction.
In the columns for the date of the time stamp and the time of the time stamp, you can see up to when the individual data extractions have extracted data.
Select the entry up to which the data in your BW system is still correct.
Save the changes.
Do not make any further changes in the BWOM2_TIMEST table.
              The next delta extraction uses the date + 1 of the selected entry as a lower limit for the data selection and the current date - 1 for the upper limit.
2. If you must load the expected data volume in several parts, proceed as follows:
Caution: There are the following two cases:.
a) The 'BWFIOVERLA' parameter in the BWOM_SETTINGS table is not set.
           Execute the 'BWOM2_TIMEST' report for the relevant DataSource.
           Remove the marker in the entry of the last delta extraction.
           In the columns for the date of the time stamp and the time of the time stamp, you can see up to when the individual data extractions have extracted data.
Select the entry up to which the data in your BW system is still correct.
           Save the changes.
Do not make any further changes in the BWOM2_TIMEST table.
               The next delta extraction uses the date + 1 of the selected entry as a lower limit for the data selection.
You can control the upper limit for the data selection by changing the ' BWFISAFETY' parameter in the BWOM_SETTINGS table. The upper limit is determined using the current date minus the value of the 'BWFISAFETY' parameter (default = 1).
If you want to extract the data of the last twenty days in four parts, for example, set the parameter as follows in Transaction SE16:
before the 1. delta extraction > > BWFISAFETY = 15
before the 2. delta extraction > > BWFISAFETY = 10
before the 3. delta extraction > > BWFISAFETY = 5
before the 4. delta extraction > > BWFISAFETY = 1 (= default)
b) The 'BWFIOVERLA' parameter in the BWOM_SETTINGS table is set (=X).
           First, deactivate the 'BWFIOVERLA' parameter in the BWOM_SETTINGS table. This is necessary because if you do not do this, the system ignores the settings of the 'BWFISAFETY' parameter.
           Execute the 'BWOM2_TIMEST' report for the relevant DataSource.
           Remove the marker in the entry of the last delta extraction.
           In the columns for the date of the time stamp and the time of the time stamp you can see up to when the individual data extractions have extracted data.
Do NOT select the entry up to which the data in your BW system is still correct, rather select the entry before that.
           Save the changes.
Do not make any further changes in the BWOM2_TIMEST table.
               The next delta extraction uses the date + 1 of the selected entry as a lower limit for the data selection.
You can control the upper limit for the data selection by changing the ' BWFISAFETY' parameter in the BWOM_SETTINGS table. The upper limit is determined using the current date minus the value of the 'BWFISAFETY' parameter (default = 1).
If for example you want to extract the data of the last twenty days in four parts, set the parameter in Transaction SE16 as follows:
before the 1. delta extraction > > BWFISAFETY = 15
before the 2. delta extraction > > BWFISAFETY = 10
before the 3. delta extraction > > BWFISAFETY = 5
before the 4. delta extraction > > BWFISAFETY = 1 (= default)
                and parameter BWFIOVERLA = X to return to the originaldelta mode.

Have to reset the Apple TV each time I open it. Is it possible it is the result of recent transfer to iCloud?

Each morning when I open CalmRadio on my Surround System which come from iTune through Apple TV I have to reset the Apple TV to get the signal through. I tought it was the result of a recent change of my router but I just remember that I have installed iCloud recently. Would it be possible that would be the reason of the necessity to reset apple TV every morning? Thanks.

I'd say your router, iCloud hasn't caused me any problems. It may be settings or interference.
Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

P6 Professional R8.3 - (Cannot move selected items because the result will exceed the limit of WBS tree maximum levels)

Hi,
Has anyone encountered this error "Cannot move selected items because the result will exceed the limit of WBS tree maximum levels"?
Please advise if there's any way around / solution to this. http://s8.postimg.org/bj900spcl/1_error.jpg
Thanks.

Thank you so much MichaelRidino!

How can I reset the countings of maximum authorization limit?

Please advise how to reset the maximum authorization limit for ADE. Thanks.

Options for when an iOS device gets locked because of forgotten password:
Restore (and reset password) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

Nepomuksearch - How to limit the number or results

Hello,
I use nepomuksearch for several versions of kde now.
Until now, we could limit the number of results in systemsettings.
Since switching to kde 4.10, it is no longer possible: this parameter does not exist in the systemsettings. We can not further limit the number of results.
Is there a way to limit the number of results in nepomuksearch, and if so, how?
Thank you very much for your help.

Hi,
If not set explicitly, the default value for WILDCARD_MAXTERMS is 5000. This is set as a wordlist preference. This means that if your wildcard query matches more than 5000 terms the message is returned. Exceeding that would give the user a lot to sift through.
My suggestion: trap the error and return a meaningful message to the user indicating that the search needs to be refined. Although it is possible to increase the number of terms before hitting maxterms (increase wildcard_maxterms preference value for your wordlist), 5000 records is generally too much for a user to deal with anyway. The search is not a good one since it is not restricting rows adequately. If it happens frequently, get the query log and see the terms that are being searched that generate this message. It may be necessary to add one or more words to a stoplist if they are too generic.
Example: The word mortgage might be a great search term for a local business directory. It might be a terrible search term for a national directory of mortgage lenders though (since 99% of them have the term in their name). In the case of the national directory, that term would be a candidate for inclusion in the stoplist.
Also remember that full terms do not need a wildcard. Search for "car %" is not necessary and will give you the error you mentioned. A search for "car" will yield the results you need even if it is only part of a bigger sentence because everything is based on the token. You may already know all of this, but without an example query I figured I'd mention it to be sure.
As for limiting the results - the best way to do that is to allow the user to limit the results through their query. This will ensure accurate and more meaningful results for them.
-Ron

Hello. My iphone 4, iOS 6.1.3 gone wild....everything is going in slow motion, every app i open is running in frames...i tried reseting the handset, with back-up, without backup(as a new iPhone) and the result is the same. Help ! Apple? Anybody ?

Hello. My iphone 4, iOS 6.1.3 gone wild....everything is going in slow motion, every app i open is running in frames...i tried reseting the handset, with back-up, without backup(as a new iPhone) and the result is the same. My battery percentage is going down down down only by looking at my phone, imess is making me crazy, after i write the name for the recipient the keyboard appears after 2 min...and the list is looooong...everything is gone wild ! Why? What can i do ?

I'm having similar issues just lately. The phone itself is very slow to respond to the touch, just scrolling between home screens is a chore at times. There have been about 2 incidents of random vibration from it. Closing home screen folders takes a couple of attempts. I find that I'm also having delayed keyboard responses when typing messages to my contacts.
Also, sometimes when I press the sleep/wake button it takes about 30 seconds to register it and actually lock or wake up.
Have you experienced the backlight failing to light up? Like if I get a message it flashes up then goes black straight after and when you press the sleep/wake or home button it lights up again but very very dimly and you have to press the sleep/wake button as if locking it and then press it again to bring the screen up properly?
Mine is also on 6.1.3(10B329), model MD245B/A, obviously not Jailbroken, carrier unlocked from Vodafone (but that was months and months ago). Roughly 17gb of storage space left.
This has only started happening in the last 2 weeks. Haven't tried the reset or anything yet though.

Please reset the ADE activation limit. Last Werk I bought a New ereader Now, when I will read a ebook then appears the message E_ACT_TOO_MANY_ACTIVATIONS

Please reset the ADE activation limit.
Last Werk I bought a New ereader
Now, when I will read a ebook then appears the message E_ACT_TOO_MANY_ACTIVATIONS

thanks alot,
now every thing is working fine, just what I needed!!!
regards and thanks again
Groy78

Resetting the limit on result section in Hyperion IR 9.3.1

Similar Messages

Maybe you are looking for