Resize images during Report

Post Author: marccollin
CA Forum: General
Hello,
I use a SQLServer database which holds images (JPG). i've a report hich display theses Images in a BLOBField
I would like to have a fixed Image Size for all my images AND My images have to be correcty Resize (with the same ratio)
Is there any way to do it ?
I'm working with C# , VS2005, CR for VS2005 .
Thanks

It's possible the images I tried were both at the same ppi... I chose two web images I had laying around and they were both 96 ppi.
Just tried it with two others, specifically saved at different ppi values. And yes, I saw it resize the placed file. Sorry about that; I should have thought of that before. I don't place images very often.
It seems you have a couple of alternatives:
1. Copy and paste as you described above. This is how I've always done it.
2. Place as a Smart Object, then if you see it resize edit the SO and make the ppi match that of the base image.
Perhaps someone can think of other methods.
-Noel

Similar Messages

Resize image during export from Imovie 11 to anamorphic. It only crops.

Hi:
I shoot with a hacked panasonic gh13 and the hack allows it to shoot anamorphic hd video without a special lens. When the footage comes out of the camera it has that stretched look to it. It should be very simple to get to true anamorphic dimensions with the custom image size options in Quicktime and Mpeg. I should be able to go to Share>Export using Quicktime>Options> then set to 1920 by 810. The stretched image should look normal after export but it only crops it no matter what option or if it is Mpeg or Quicktime. I would appreciate any direction I could get with this. It should be pretty simple.
Thanks
Thirgy

I'm not sure what 'anamorphic HD' is?
You can have anamorphic SD; which stretches 4:3 SD video to 16:9.
But HD is not anamorphic.
There are odd 1440x1080 sizes, but these are not generally described as "anamorphic HD".
I can't say I have heard of 1920 by 810 as a standard size.
iMovie Mac is really only for editing standard frame sizes, and so your video files are probably confusing it.
I would suggest you move to a dimension open editor like FCP7.
Or shoot at a standard frame size.

Photopshop CS5 resizing images

Hi, I recently moved over from CS2 on windows to CS5 on Mac. I am a photographer and design my own wedding albums. My current issue is, that when I move images from one to another to create a montage, the images do not stay at their current size but instead automatically enlarged so that they fill the new canvas size (in fact they become greater than the canvas size). This means I have to re-size every picture back into its oirginal size within the canvas to create the montage (the monatge being - an album page with multiple wedding pictures of various sizes designed on it). I have tried changing numerous "property settings" within Photoshop, and particularly the "resize image during place" option, but not have been successful. This never happened in CS2 so am not sure if its a bug in CS5? Can anyone help as I have ran out of ideas how to solve this. Many thanks

The resolution of the images is important since an image dragged from one image into the montage image will take on the resolution of the image its dropped into (the montage image).
For example, if your image is 300 ppi and you drag it into your montage image that is set at only 100 ppi the image will be a lot larger than you expected.
Also the pixel dimensions can be important regardless of the resolution. Something 2000x2000 pixels dragged into an image that is only 1500x1500 pixels will be larger than the canvas size even if the resolution is the same.

Cluster not saved correctly in Append Control Image to Report VI

[LV8 with Windows XP]
I'm using the Append Control Image to Report VI to save the image of a control to Word (the same problem occurs if I save to Excel). This VI seems to work fine with all my controls except clusters. Not all of the contents of the cluster show up in the saved image. I have to expand the edges of the cluster way beyond the cluster contents in order for all the contents to show up in the saved image. Is this a bug? Is there a way to "realign" the contents of the cluster within the boundaries?
George

Hi,
just had a customer with the problem with this cluster picture function and I wrote a little VI that manually gets the picture, resizes it to the cluster and the rest is up to you. The only thing is, that you have to place the "zero point" of the frontpanel in the upper left corner to get the proper image.
For Users who want to upgrade: This issue is fixed with the next LabVIEW release.
Best Regards,
Andreas Pistek
~~~ Logic is a systematic method of coming to the wrong conclusion with confidence ~~~
Attachments:
better picture.vi ‏19 KB

Images with Reports...

I'm trying to insert an image file into a report template. Whenever I instert the image, it is automatically resized (not it's original size). I can't find any resources on how to format images in Reports. I tried compensating for the SNAFU in Photoshop but Reports hasn't been cooperative. Any suggestions?

try to use File > Import

CSS or HTML code to create resizable images to display in small view

I am a book publisher and am publishing books to be read on Adobe Digital Editions. I'm looking for the CSS or HTML code to create resizable images that will display in "small view." Does anyone happen to know how to do this?

hi,
Our customers want to start reports by pushing a button instead of clicking on a link inside a dashboard.Create a dashboard page with all buttons referring to your dashboards....Is that fine???
There u ll refer to your dashboard which has download,refresh all the options
thanks,
saichand.v

Resizing images for idvd

Hello,
I've not yet tried to resize images yet . . . I've just opened idvd and bring the pics in. Most are in the 1.5 to 3.2 mg size. When burned to dvd and viewed on tv (4:3) they are passable. Maybe a little soft.
A post said, "Reformat your images to 100 dpi by the screen size (720x540 pixels for 4:3 TV aspect ratio or 854x480 pixels for 16:9 aspect ratio)."
Question: Is the 720 the width or height? So what about portrait shots? All my shots show 72 dpi in Photoshop. Are this suggesting that I increase to 100 dpi?
Thanks for help.

Resizing them probably won't do anything since iDVD resizes them for you. However I guess there is the change that when iDVD resizes them down to the proper TV screen size, it doesn't do as good a job compared to you doing it in Photoshop, so I guess worth the experiment (please report back your findings).
720 is the horizontal size, but you don't want to use that. You want to use 640. 640 square computer pixels are equal to 720 "rectangular pixels" on a TV. iDVD will do the conversion from 640 square pixels to 720 "rectangular pixels" for you. If you make it 720 on the computer, then iDVD will still convert it and distort your photo.
I put "rectangular pixels" in quotes because a normal TV is an analog device so there are not really "pixel" but an analog signal.
Ignore the DPI or PPI (dots per inch or pixels per inch) setting. That setting means absolutely nothing when displaying on a TV or on a computer monitor. It is a printing specification, so it doesn't matter what you set it as, it will look the same on the computer or the monitor (e.g. 640x480 at 72 dpi will look exactly the same as 640x480 at 100 dpi). All you care about are the absolute number of pixels (such as 640 by 480) in the photo.
Patrick

Which approach to use for resizing image

There are two ways of resizing images as I know:
1. image.getScaledInstance(width,height,hint);
Using hint like Image.SCALE_AREA_AVERAGING gives somehwat satisfactory resizing.
2. static BufferedImage resize(GraphicsConfiguration gc, BufferedImage source, int w, int h, Object hintValue) {
BufferedImage result = gc.createCompatibleImage(w, h, source.getTransparency());
Graphics2D g2 = result.createGraphics();
g2.setRenderingHint(RenderingHints.KEY_INTERPOLATION, hintValue);
double sx = (double) w / source.getWidth(), sy = (double) h / source.getHeight();
g2.drawRenderedImage(source, AffineTransform.getScaleInstance(sx, sy));
g2.dispose();
return result;
where the hint passed is RenderingHints.VALUE_INTERPOLATION_BILINEAR ;
Now which of the two method method should I use-using image.getScaledInstance() or using AffineTranform ? opr is there any other way which is faster but provides good result?
i am creating an image editor, so the GUI dialog will have oprtion to choose the algorithm. I want the method which provides better result yet faster.
Tanveer

http://forum.java.sun.com/thread.jsp?forum=20&thread=522483

No data found when display image in report

Hi,
I have a table with a blob field in it which I use to store some image (gif),
I tried to display the image in report but follow the guideline in http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/advnc_blob.htm#BCGBCHBD
but when I run the report, error
"report error:
ORA-01403: no data found"
prompt, I do not have MIME,FILENAME column in the table, so I define only
IMAGE,Table Name,Column containing BLOB,Primary Key Column 1 and Primary Key Column 2 in the report column.
Anyone has also this problem?
Thanks
Pek

Hi,
I found that the problem is there when I select the option
"Use Generic Column Names (parse query at runtime only)" in the report.
Is this a bug?
Rgds
Pek

Problem with Append Front Panel Image To Report.vi

I'm using LV 7.0 with the MicroSoft Report Generation toolkit installed. Under the Report Generation palette there exists an Append Front Panel Image To Report vi. Also on the same palette there is an Easy Print VI Panel or Documentation.vi which uses another Append Front Panel Image To Report vi located under the VI Documentation subpalette. Here is the problem; I have serval vi's that use Append Front Panel Image To Report.vi from the Report Generation palette and I have a couple of vi's that use the Easy Print VI Panel or Documentation.vi which is linked to the Append Front Panel Image To Report.vi located under the VI Documentation subpalette. Clear as mud!
This creates a conflict of intrest. In a nut shell th
ere are two vi's with the same name in different locations doing different things. I have a program with subvi's that need to call each respective Append Front Panel Image To Report.vi and that just is not working.
Is this a known issue with LV7.0 that has already been addressed and/or resloved?
Thanks.

ATC Herman,
Based on the picture you posted and what you are describing, it looks like you might have an incomplete install. What version of the toolkit do you have? Was it first installed on an earlier version of LabVIEW, or did you install it first on 7.0? Your VI Documentation Palette appears the same as if you hadn�t installed the toolkit. I�ve attached a screenshot of what it should look like. The VI in question is a polymorphic VI, which may be causing some of the confusion. If you right-click on it and select �Open Polymorphic VI�, it will show you what options you have, depending on the input. I opened both test and test1, and they appeared the same for me. I was able to have them both on the block diagram. The path to bo
th of them was C:\Program Files\National Instruments\LabVIEW 7.0\vi.lib\printing\ReportDocExtensions.llb\Append Front Panel Image to Report.vi. The .llb ReportDocExtensions has the polymorphic VI, as well as copies of each of the possible instantiations. Make sure you have these VI�s in the .llb in that directory.
There is a KB on having the toolkit on multiple versions of LabVIEW and what files you need. Make sure you have all the files listed.
Please let me know if you are able to get to the bottom of the issue with the above information.
Thanks, and have a happy day!
Robert M
Applications Engineer
National Instruments
Robert Mortensen
Software Engineer
National Instruments
Attachments:
Report_Palettes.JPG ‏57 KB

Printed front panel graphics quality (Print Panel to Printer method vs. Append Front Panel Image to Report.vi)

LV 6.02 (or 6.1)
NT 4.0
I have a vi that the front panel includes all the information I need to print except that it is on different pages of a tab control to conserve screen space. I was attempting to programatically cycle the value of the tab control in a For loop and invoke the Print Panel to Printer method to print 7 pages of the front panel, each with a different tab page selected. The printouts were excellent quality but beginning with the second consecutive Print Panel to Printer method the on screen front panel image of the VI being printed would become jumbled (sometimes, by the time 7 printings were done, the entire front panel image would disappe
ar and a bitmap of the desktop or underlying windows would be visible in the VI's panel frame) yet the subsequent Print Panel to Printer methods continued to print the panel as they should appear. The visible front panel graphics would never return to normal and the only solution was to close the vi (in the dev system) or exe (compiled) and re-launch. I tried a lot of things (like hiding the panel to print before printing and showing it after printing) with no luck. It appears that two or more of these consecutive invoke methods caused the problem regardless of whether the tabs were cycling, or even if there was no tab control and much fewer controls on the panel to be printed than normal. I also had the same problem with LV 6.1.
Finally, I was forced to switch to the report generation toolkit vi's, I cycle through the tab pages and use the Append Front Panel Image to Report.vi to append each image to the report. This is faster and control returns to my program quicker but I a
m unhappy with the printed quality of the graphics of the front panels. They are not as high of resolution as those generated via the Print Panel to Printer method.
Any suggestions?

You might try changing the way the VI is printed by going to tools >> options >> printing. Try the postscript and bitmap settings.
Jeremy

Problem to display multiple images in report!

Hi,
I have 3 tables, in each table i have a column with an image "blob"!
I have creat a view with this 3 tables and a report of this view.
My problem is that when i try to show one image column in report, "there is no problem", but when i try to show two or tree column´s with images, it display's only the last image that i call in report!
select     "V_VIEW"."ID_STATE" as "ID_STATE",
     "V_VIEW"."STATE" as "STATE",
     "V_VIEW"."ID_TABLE" as "ID_TABLE",
     "V_VIEW"."NAME" as "NAME",
     "V_VIEW"."ID_PRIORI" as "ID_PRIORI",
     "V_VIEW"."PRIORI" as "PRIORI",
     "V_VIEW"."ID_PRODUCT" as "ID_PRODUCT",
     "V_VIEW"."PRODUCT" as "PRODUCT" ,
dbms_lob.getlength("V_VIEW"."IMAGE") IMAGEPRODUCT,
dbms_lob.getlength("V_VIEW"."IMAGEPRIORI") IMAGEPRIORI,
dbms_lob.getlength("V_VIEW"."IMAGESTATE") IMAGESTATE
from     "V_VIEW" "V_VIEW"
Using normal standart report with in report atributes column:
IMAGE:T_STATES:IMAGESTATE:ID_STATE::::::inline:
What are i making wrong, in this case he does only make the last dbms_lob.getlength and shows only dbms_lob.getlength(IMAGESTATE) IMAGESTATE;
If i change the order of the report and put in the end of the code:
dbms_lob.getlength(IMAGETYPE) IMAGETYPE, the he shows this last image!
I have try to make a demonstration of my problem on this forum, so i have creat an example on apex.oracle.com and there it works just fine, showing all the images of report.
i am using apex 3.1.0.00.32
Why doesn't the same example work in my aplication.
If someone can have a look at working example:
http://apex.oracle.com/pls/otn/f?p=53120:1:1299118515377853:::::
pepe
pepe
pepe25
Thank's in advance;
Pepe

Pepe,
Is the first report on the page working correctly? I think so. So I don't see an example of what you described.
I do see that there are no images in the second report, but that's not the same as the first problem you described, is it?
Scott

CRM 2011+An error has occurred during report processing. (rsProcessingAborted)

Hi,
i have installed CRM 2011 on-premise version in Server A. Database and CRM 2011 Reporting Extenison in Server B. Both the server are 64 bit server and IIS 7.0 . i can able to browse the Report server url. USer as been added in Sql DB Logins and
as permission to Reportserver and ReportservertempDB.
i can able to access the CRM Reports only using Admin Credenttials that is from the credential which Report server is installed and configured
Error in server 1:
Web service request SetDataSourceCredentials to Report Server
(http://servername/Reportserver_XXXSQLSRVR)failed with SoapException. Error: An error has occurred during report processing. (rsProcessingAborted).
Error in Server 2: took this error From error log file
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Data source 'CRM': An error has occurred. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: An exception has occurred in data source 'CRM'. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: i INFO: DataPrefetch abort handler called for Report with ID=. Aborting data sources ...
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'.
---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
Eventvwr error in server 2:
Failed to unload app domain DefaultDomain. The following exception occurred: Error while unloading appdomain. (Exception from HRESULT: 0x80131015).
I tried the Following ways to fix it
1.added User as content manager
2.In CRM apppool i have Admin in identity column
its really paining when i'm unable to access the CRM 2011 Default Reports. got stucked for a day.
Thanks, Saraswathy Kumaravelu

Hi All,
I encountered this same issue today after installing CRM 2011.
CRM 2011 on Server A
SQL and SSRS 2008 R2 on Server B
I found that I got the same errors described here when running the standard reports even after I had installed the Reporting Extension (CRM 2011 replacement for CRM 4.0 Data Connector). The reason I got the error was because the 'Data Source Type' had not
been updated in Report Manager.
Here's how I resolved:
1. Browse to Report Manager (http://SERVERB/Reports)
2. Open the Organisation_MSCRM folder
3. Click Show Details
4. Open the MSCRM_DataSource
5. Change the Data Source Type from Microsoft SQL Server
to Microsoft Dynamics CRM SQL
*Note: - This option is only available once Reporting Extension has been installed on SSRS Server.
6. Clear the contents of the Connection String box
7. Set the Connect Using: option to Credentials Supplied by user running the report
but do NOT check the
Use as Windows Credentials when connecting to the DataSource option.
8. Click Apply
9. Restart the SQL Reporting Services Service in
Reporting Services Configuration Manager
10. Test by running one of the Standard CRM Reports (e.g. User Summary)
Ta Da!! - Success!!
Hope this helps!

[Forum FAQ] Troubleshooting "An error has occurred during report processing" message when viewing SCCM reports

Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted)

Need help on quality of resized image!!

I am required to resize images to max 1240pixel (longest dimension) as a submission of work, though when work is viewed it will be at 30"x40". Can not figure out a way to do this where images don't become quite pixelated when viewed at larger size. Appreciate any suggestions.

Is there some software to verify if my graphics card is shotty?
Techtool Pro has some testing, the AHT tests VRAM, but game benchmarks and stressing will tell you the most.
Is re-seating the graphics card or memory worth trying?
Absolutely. Just don't reinstall the graphics card until you clean it thoroughly.
Cleaning the dust out of my machine?
YES. A dust filled graphics card heatsink will cause the GPU to cook, and cause problems thet you describe.
If I need a new graphics card, what are my options? Do I have to purchase it via Apple store? I would like to stick with an Nvidia card so am I stuck buying the same card I currently have or can I upgrade?
You don't have to buy from Apple, but using with OS X limits your choices to Mac compatible or flashable PC versions.
There is an awful lot of user input into this topic here:
http://blog.macsales.com/602-testing-those-new-graphics-cards
Card reviews can also help:
http://www.anandtech.com/video/showdoc.aspx?i=3140&p=9
http://www.tomshardware.com/reviews/radeon-hd-4870,1964.html

Resize images during Report

Similar Messages

Maybe you are looking for