Resolve SharePoint Central Administration Critical Issues

In the photo I have tried to fix the critical issues, but have had no luck.
The top three issues are the most important ones i want to get rid of.
Please provide steps to resolving these issues permanently.
"One or more servers not responding" is a stop/start timer issue with SPTimerV4 which is relating to a specific server of mine (Portal10A). I go to this server to start SPTimerV4 in the cmd. When I start the timer, this critical
issue goes away. However, the SPTimerV4 randomly stops again (4 hours later to a day later). Just starting the SpTimerV4 is only a temporary solution, until the SPTimerV4 stops again and I have to restart.
Thank you!

1. Ensure that SharePoint 2010 Timer Service is in Started mode under Start > Services.
2. Ensure your SharePoint 2010 Timer Service is running under your Farm Account. This Farm Account must be part of your admin group and ensure that this account has admin permissions to run services.
The farm account is also referred to as the database access account and is used
as the application pool identity for Central Administration, and as the process account for the Microsoft SharePoint Foundation 2010 Timer service.
Plan for
administrative and service accounts in SharePoint (This article is also applicable to 2010 version)
3. If both of above is already done and issue not resolved yet then restart the SharePoint 2010 Timer Service.
4. If all above does not resolves your issue then please re-run SharePoint Configuration Wizard and restart your SharePoint Application Server.
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

Similar Messages

Execution Permissions cannot be required error when opening SharePoint Central Administration

The following is the stack trace can anyone share what might be causing and how to resolve this.
Execution permission cannot be acquired.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Security.Policy.PolicyException: Execution permission cannot be acquired.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[PolicyException: Execution permission cannot be acquired.]
   System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Boolean checkExecutionPermission) +10246216
   System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Int32& securitySpecialFlags, Boolean checkExecutionPermission) +97
[FileLoadException: Could not load file or assembly 'Ajax, Version=5.7.20.2, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418)]
   System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0
   System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +416
   System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166
   System.Reflection.Assembly.Load(String assemblyString) +35
   System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190
[ConfigurationErrorsException: Could not load file or assembly 'Ajax, Version=5.7.20.2, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418)]
   System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +11326376
   System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +388
   System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +232
   System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +48
   System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +210
   System.Web.Compilation.BuildProvidersCompiler..ctor(VirtualPath configPath, Boolean supportLocalization, String outputAssemblyName) +76
   System.Web.Compilation.CodeDirectoryCompiler.GetCodeDirectoryAssembly(VirtualPath virtualDir, CodeDirectoryType dirType, String assemblyName, StringSet excludedSubdirectories, Boolean isDirectoryAllowed) +11315554
   System.Web.Compilation.BuildManager.CompileCodeDirectory(VirtualPath virtualDir, CodeDirectoryType dirType, String assemblyName, StringSet excludedSubdirectories) +185
   System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +551
[HttpException (0x80004005): Could not load file or assembly 'Ajax, Version=5.7.20.2, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418)]
   System.Web.Compilation.BuildManager.ReportTopLevelCompilationException() +76
   System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +1012
   System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) +1025
[HttpException (0x80004005): Could not load file or assembly 'Ajax, Version=5.7.20.2, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418)]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +11420374
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +88
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +4405156

Hi karabo,
According to your error message, it says that the ajax.dll (Version=5.7.20.2) assembly is missing.
As far as I know, SharePoint Central Administration web application does not refer to the ajax.dll assembly by OOB.
Do you have any custom solution which reference ajax.dll assembly? If so, please undeploy it before your solution is working fine.
Also you can try to copy the ajax.dll assembly to Global Assembly Cache or your Central Administration web application Bin directory.
Reference:
http://www.herdprotect.com/ajax.dll-fc852aef74018cc802cbcb9b6dbc470799af2885.aspx
https://msdn.microsoft.com/en-us/library/office/ms521365%28v=office.12%29.aspx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error Starting SQL Server Analysis Services (SharePoint - Central Administration)

I am not able to start the SQL Server Analysis Services via SharePoint Central Administration but SQL Server PowerPivot System Services yes.
I then tried to start the SQL Server Analysis Services(PowerPivot) via the sql server(powerpivot), it was started but will stopped after a while. I am not sure why it happened. Can anyone helps me? I have debugged this issue for almost 2 weeks time but still
failed to solve it.
Microsoft SharePoint Server 2010 - 14.0.6029.1000 (x64)
Microsoft SQL Server 2008 R2 (SP2) (PowerPivot) - 10.50.4000.0 (X64)

Hello,
Have you got any error message or log information in your scenario? Please help to check Windows Event log and SharePoint log for further investigation:
Configure and View SharePoint Log Files and Diagnostic Logging (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ee210652.aspx
Or this issue might be caused by expired password. Please try to update an expired password for SQL Server Analysis Services (PowerPivot) instance:
http://technet.microsoft.com/en-us/library/ee210642.aspx
Regards,
Elvis Long
TechNet Community Support

Services missing in SharePoint Central Administration

Hi,
In SharePoint Central Administration -> Application Management -> Manage Service Application.
I could see only the following services
- Application Discovery and Load Balancer Service Application
- Security Token Service Application
- Usage and Health data collection
Rest all the other services are missing.
Please advise how to get all the other missing services back. The Sharpoint is installed on our build server and want to integrate it with TFS. As it is LIVE project server and CI is also configured on it, would reinstalling Sharepoint again on it,
will create some issue/problem for the TFS.
Please help and advise
Thanks
Irfan Khan

Hi,
I understand that you want to get the services on your farm. I can see from your first post that you are looking at the service applications page, not the Services on server page. You need to first check the ‘Manage Services on server’ page. Make sure that
the services you need have already been started. Then you can go to the ‘Manage Service Application’ page to create the service applications.
If you want to use the PerformancePoint Service, you need to make sure that you are using SharePoint 2010 enterprise edition. Check the SharePoint edition here:
Open Central Administration> Upgrade and Migration> Enable Enterprise Feature.
Here you can enter your enterprise version product key to enable enterprise feature.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Sharepoint central administration can not open. It came up with error message: http 503. service unavaliable error messages when attempting to open sharepoint central administration

Pls the problem started when the system administrator change some of the roles all the service accounts on the active directory. So when I restarted the sharepoint server i noticed the following
1) the sharepoint intranet site does not open. it come ups with errror messages
2) the sharepoint central administration could not open as well
Pls what do i do

Hi ticodalo, there could be many reasons for this. Check the following links to see if they help:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/9acc688f-40e0-4f89-81f0-fb165076918e/error-while-opening-sharepoint-central-administration?forum=sharepointgeneralprevious
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/8b5fa7ff-f315-4ab1-80b6-542ad0b66b70/sharepoint-foundation-2010-central-administration-error-503?forum=sharepointadminprevious
cameron rautmann

How to deploy sharepoint central administration 2013 in different servers

I want to deploy sharepoint central administration 2013 in different servers, So if one service is down in sever. It is up in other server.
How I can achieve this.
Thanks,
Siva

Yes.
http://www.mssharepointtips.com/tip.asp?id=1006
http://blog.fpweb.net/how-to-run-sharepoint-central-admin-on-two-servers/#.VLSH_CuUeIU
Thanks, Ashish | Please mark a post helpful/answer if it is helpful or answer your query.

Sharepoint Central Administration appears to not load css or scripts

We have SBS 2011 with Sharepoint and i'm currently trying to enable a few features in the Central Administration. Our companyweb site works great but when logging in to Central Administration all we get is what appears to be raw HTML and background javascript
errors which cause a number of the buttons to not work at all.
I have uninstalled the Central Administration and reinstalled it but the problem persists.
I have checked the permissions at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\1033\STYLES
And everything seems to suggest files are available and security is set correctly.
I've also tried to run in Firefox and Chrome with the same results.
Does anyone have any experience of this issue or where to start troubleshooting it.

Hi ,
Please try re-run the "SharePoint 2010 Products Configuration Wizard" for your SharePoint farm, see if it would fix this issue.
http://social.technet.microsoft.com/Forums/en-US/6738671e-dfc7-4446-9151-b111ec14ec00/just-upgraded-a-farm-now-sharepoint-css-is-not-loading-and-javascript-function-undefined?forum=sharepointadminprevious
Thanks
Daniel Yang
TechNet Community Support

SharePoint Central Administration: High Availability and Load Balancing

Running Central Administration on more than one server in the farm is 100% supported and indeed a recommended best practice on SharePoint 2010.
Is Load Balancing on Central Administration
supported for SharePoint 2013?
Is Implementing Kerberos Authentication for load balanced Central Administration 100% supported in SharePoint 2013?
Is Implementing Central Administration on Port 80 or 443 100% supported on SharePoint 2013?
I’ve read a article about from Spence
Harbar. I would like to know of this is supported for SharePoint 2013?
Source:
http://www.harbar.net/articles/spca.aspx
jtjscholten

Thanks! Disappointed there is no description from Microsoft :(
jtjscholten

Ribbon options not working for SharePoint Central Administration

Hi,
I am able to see the options on the Ribbon of Central Administration, but clicking on the options is not working.
Have tried, Starting the Central Admin with Admin account, Setting user account control to never notify, adding the site to the trusted sites, resynced the SP servers time etc.
But nothing helped.
The ribbon is not working only for the Central Administration, it is working for web applications created.
I could not create a new web application, create a new service application, could not select a webapplication or simply i cannot do any thing on Central Administration.
Need help on this, Thanks in advance.

Couple of things, you can check..
1) Run the Internet Explorer as Administrator and then open CA,
2) make sure your Admin account is in Local Admin group,
http://epmgelist.wordpress.com/2013/06/14/central-administration-greyed-out-ribbons-and-missing-functions/
Check if UAC is enable or disable?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

I AM IN SERIOUS NEED OF HELP. I CAN'T ACCESS MY SHAREPOINT CENTRAL ADMINISTRATOR PAGE

I am a Computer Network and Systems Administration student. I gradutae may 10th and i am working on my capstone project. I am doing my project on sharepoint and once i install the active directory domain services, i begain having problems. i can not access
the sharepoint web page i have done everything that i have found and nothing is working PLEASE HELP ME.

Did you install ADDS after you installed SharePoint? If so then that will never end well, you'll probably need to re-install SharePoint again.

Under the Sharepoint Central Administration the Mange Services of the Reporting Services is not in started mode..

The Reporting services Application is displaying and showing in Running state..
But under the Manage Services is not allowing to Start.. Pls help ASAP.
Thanks
Vinay

did you check the ULS logs?
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil Loka

Please try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response.

Team Foundation Server 2013 update 4 New Install - Error 503 Service Unavailable for Sharepoint Central Admin

Hello,
I ran a new install of Team Foundation Server and let it install the built in SharePoint pieces on a single server setup. After the install i'm able to access the
http://teamfoundation:8080/tfs/ address without issue but am unable to create a project. When I attempt to create a project I get the following error:
TF30172: You do not have permission to create a new team project (when checking security i'm a member of the project collection administrators and Team Foundation Administrators)
This led me to look at the sharepoint central administration site where I receive the following error:
Error 503 Service Unavailable
I've gone through and validated the identity is set correctly in IIS for the following services:
SharePoint Central Admin v4
SharePoint15AppPool
The SharePoint Web Services Root is set as LocalService instead of the domain user.
The identity domain user is setup as local administrator on the Team Foundation Server. They are all set to use .net v4.0.30319 with integrated Pipeline mode.
Any help would be great!
Thanks!
Eric

Hi Eric,
Thanks for your post.
Please share your detailed team project creation log here.
In your TFS Admin Console>>Extensions for SharePoint Products tab, ensure SharePoint Web Application shows correctly in the right panel. And go to TFS Admin Console>>Application Tier>>SharePoint Web Applications tab, ensure your SharePoint
web application displays in the right panel, then select your SharePoint web application and click Repair Connection, ensure can repair successfully.
In your IIS Manager, select your SharePoint Central Administration V4 site and click Browser:17012(http) in the right panel, check if your SharePoint Central site can be opened successfully or not. If your SharePoint Central site cannot be accessed, I think
this issue relate to your SharePoint site, you should contact SharePoint experts to resolve this issue first. After you resolved this issue and your SharePoint Central Admin site can be accessed correctly, then try to create your team project(within SharePoint
site) again, if there still has issue when creating team project, please share the detailed error message here, we will try to resolve it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SQL Server 2012 PowerPivot System Service not visible in Central Administration

Hi all,
I want to test PowerPivot 2012 on the following configuration:
- Windows Server 2008 R2
- Sharepoint 2010 - Enterprise edition
- SQL Server 2008 R2
- PowerPivot for Sharepoint<o:p></o:p>
As such, I downloaded SQL Server 2012 Evaluation and tried to upgrade SQL Server 2008 PowerPivot for Sharepoint instance to SQL Server 2012 PowerPivot
for Sharepoint. It didn't work as it's not possible to upgrade from Enterprise to Evaluation edition without a pid.
Next, I uninstalled the existing SQL Server 2008 PowerPivot for Sharepoint and I installed the SQL Server 2012 PowerPivot for Sharepoint.
I started to configure PowerPivot in Central administration (http://msdn.microsoft.com/en-us/library/ee210609.aspx) , but I got stuck at the 2nd step Create and Configure a PowerPivot
Service Application (http://msdn.microsoft.com/en-us/library/ee210685.aspx) in Central Administration.
The problem is that both SQL Integration Service and SQL Server PowerPivot System service are not visible in Central administration > Manage
services on server; however they are visible and running in Windows Administrative Tools > Services.
Do you think the services are missing in Sharepoint Central Administration because the Sharepoint configuration database is on SQL Server 2008, while the Powerpivot instance is on SQL Server 2012 ?

Thank you for the suggestion.
Meanwhile I have managed to solve the problem. What I've done:
- remove PowerPivot configuration using the Power Configuration Tool
- uninstall PowerPivot
- reinstall PowerPivot
- run PowerPivot Configuration Tool - I still got the parent service error
- remove PowerPivot configuration using the Power Configuration Tool
- run PowerPivot Configuration Tool - this time I received another error regarding the user that runs SQL Server Integration services
- check Sql Server Analysis Service account in Central Administration > Security > Service accountsManage service account - it seems that it was running under Local System account, although in Administrative Tools > Services it appeared to
be run by my domain account
- set a domain account for Sql Server Analysis Service in Central Administration
- run the PowerPivot Configuration Tool - this time it went smoothly.
The following url provides very useful info related to this type of issue: http://whitepages.unlimitedviz.com/2012/09/troubleshooting-and-removing-a-failed-installation-or-upgrade-of-powerpivot-for-sharepoint/

Central Administration not Available, STSADM password reset errors "job-admin-apppool-change" already exists

Hi Everyone,
I think I've shot myself in the foot by not properly following set up instructions.
I have a two-fold problem. Firstly, my Sharepoint Central Administration V4 site is showing
Service Not Available. This seems to be related to the credentials the
Central Administration V4 Application Pool - hitting Test Settings within
IIS Manager for the site shows an Authentication and Authorization error for the credentials due to a bad password.
My reading indicates that I should run something to the effect of:
%STSADM -o updatefarmcredentials -userlogin DOMAIN\username -password <new password as set via AD>
This runs into the following Error message
Error deploying administration application pool credentials. Another deployment may be active. An object of the type Microsoft.SharePoint.Administration.SPAdminAppPoolCredentialDeploymentJobDefinition named "job-admin-apppool-change" already exists
under the parent Microsoft.SharePoint.Administration.SPTimerService named "SPTimerV4". Rename your object or delete the existing object.
I've tried searching out a solution but as yet have been unable to find a mechanism to resolve this error. I have had a look through http://social.technet.microsoft.com/forums/en-US/sharepointadmin/thread/b7c17dac-1cd1-4f75-a031-e28e4fbfd2f7 but
it doesn't seem to relate to the same problems - as far as I know the account from which the command is being run is a farm administrator and the problem seems to be the existing job rather than permissions errors.
Your help will be much appreciated.
Stuart

Hi Stuart Weaver,
Firstly, please check if the SharePoint 2010 timer service is running. If not, please start it manually, then check the effect. In addition to this, you can try to
run SharePoint configuration wizard, then check the effect.
Note: when you start the SharePoint 2010 timer service, make sure you input the latest password. The steps are as follows:
Open services.msc, locate the SharePoint 2010 timer service, double click it, then click log on tab, input the updated password, then click apply.
Hope this helps.
Rock Wang
Regards, Rock Wang Microsoft Online Community Support

Resolve SharePoint Central Administration Critical Issues

Similar Messages

Maybe you are looking for