Resolving OCI error issues

I have an apex 4.0 app running on 11gr2 oracle that calls an oracle proc that uses an autonomous transaction pragma and then calls a microsoft sql server proc via a db link and heterogenous services. I had an error on the sql server side with the proc (PK insert violation) and then received an OCI error on the apex side. I fixed the issue and verified thatI could run the oracle proc to ms sql proc in toad without error but I am still getting the OCI error in apex. Besides restarting apex, is there anything else that I can do to stop the OCI errors from occuring in apex?
Edited by: user11201107 on Nov 30, 2010 1:55 PM

Hello KelGrey,
I have noticed your post about your Photosmart 7510 showing "offline". I did some research on this issue for you and I have found a troubleshooting document for you to follow to hopefully correct the problem.
I am going to post a link below for you, you will need to select your operating system first and then select the troubleshooting guide that is titled " Printer is offline " Message Displays on the Computer and the Printer Will Not Print ".
I hope this helps!
Take care
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • Attunity Error in SSIS - "OCI Error Encouneterd"

    I have SSIS BIDS (SQL Server 2008) (32 bit), and am using Attunity connector to connect to an Oracle DB. A while back we had our systems upgraded to windows 7 64 bit.
    I have installed Oracle 11g client on my machine, added TNS entries for the above Oracle server connection and also pointed this path (path for TNSNames.ORA) in the "PATH" environment variable as well as "TNS_ADMIN" (which I created)
    environment variable.
    Even after doing all this, I get the following error when validating the Attunity Oracle source connector, the error is as follows:
    "OCI Error Encouneterd. ORA-12154: TNS could not resolve the connect identifier specified, Test connection failed".
    I also researched that this might be due to paranthesis in the path for devenv.exe (BIDS).... So I went through the following post, installed JUNCTION, and created a junction pointing to the actual directory for devenv.exe.
    http://danieladeniji.wordpress.com/2011/08/03/microsoft-sql-server-integration-services-attunity-error-oci-error-encountered-ora-12154-tnscould-not-resolve-the-connect-identifier-specified/
    This too has not resolved the problem....
    Any help appreciated!!

    Okay I checked out the solution in the link and tried to implement the same:
    To solve the problem, you have two options:
    Specify the Oracle connection string, instead of the TNS service name in the Oracle Connection Manager Editor, for example, in the following format:host:port/service_name
    Define a dummy registry entry (Z_SSIS) as follows:
    Open the regedit utility.
    Locate the following Key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ORACLE.
    Right-Click on ORACLE node and click on New -> Key.
    Call the new key Z_SSIS (to make sure it's the last entry).
    Right-Click on the Z_SSIS node and click on New -> String.
    Name the property ORACLE_HOME.
    Double-Click on the ORACLE_HOME and set it to the location of the Oracle 32Bit installation home directory you want to use
    Option 1 does work , you can do that instead of just giving the TNS Name of the connection. So probably I can use that as a solution for my problem here...
    Option 2 does not work...I tried creating the new registry key, but that has not solved the issue.
    Thank You

  • Resolve this error during installation of EBS 11i

    i faced this error when install Oracle 11i on windows XP.
    It Bootrstapping to temp. folder and after Bootrstapping log file show below error:
    plz any one can help me to resolve this mentioned issued on last two lines......
    ================================================================
    Starting from CD area F:\Stage11i\startCD\Disk1
    There was an error while running the command - cmd /c rmdir /S /Q C:\DOCUME~1\Abhi\LOCALS~1\Temp\rapidinstall
    The system cannot find the file specified.
    RW-50010: Error: - script has returned an error: 2
    Returning - 0
    ===================================================================
    Below are the logfile details......
    Oracle Applications Rapid Install Wizard Install log
    >> Using Rapid Wizard Version : 11.5.10.35
    >> Install session started : Sun Mar 21 14:12:43 IST 2010
    >> Rapid Wizard source location : F:\Stage11i\startCD\Disk1\rapidwiz
    >> Command Line arguments for this execution :
    =================================================================
    Install Session Information
    Host Name : munna.com
    Host Operating System : Windows
    User running Install : Abhi
    =================================================================
    InstUpgPanel
         User action : Install Oracle Applications
         Install type : Standard Install
    InstallPanel
         User action : Create configuration file
         Description : To create a new intance cofiguration.
    NumNodesPanel
         Install type : Single node Install
         Description : Installs all the services on a single node.
    InstallSidPanel
         Database type : Vision Demo Database
         Database name : VIS
    RdbmsPanel
         Derived Mount Points :
              Base Install directory : d:\oracle
              Oracle Home : d:\oracle\visdb\9.2.0
              Data Top (SYS) : d:\oracle\visdata
              Data Top (LOG) : d:\oracle\visdata
              Data Top (TXN) : d:\oracle\visdata
              Data Top (ARCHIVE) : d:\oracle\visdata
    MtierInfoPanel
         Configuration Information for Node - munna - Admin Server / Concurrent Mgr / Forms Server / Web Server
              Derived Mount Points :
                   MKS directory : C:\install_soft\MKS
                   MSDEV directory : C:\install_soft\MVS\VC98
                   Base Install directory : d:\oracle
                   APPL_TOP Mount point : d:\oracle\visappl
                   APPL_TOP aux. 1 : d:\oracle\visappl
                   APPL_TOP aux. 2 : d:\oracle\visappl
                   APPL_TOP aux. 3 : d:\oracle\visappl
                   COMMON_TOP : d:\oracle\viscomn
                   8.0.6 ORACLE_HOME : d:\oracle\visora\8.0.6
                   iAS ORACLE_HOME : d:\oracle\visora\iAS
                   Temp Directory : d:\oracle\viscomn\temp
    PortPanel
              Selected port pool :
                   Domain Name : com
                   Database Port : 1521
                   RPC Port : 1626
                   Reports Port : 7000
                   Web Listener Port : 8000
                   OProcMgr Port : 8100
                   Web PLSQL Port : 8200
                   Servlet Port : 8800
                   Forms Listener Port : 9000
                   Metrics Server Data Port : 9100
                   Metrics Server Req. Port : 9200
                   JTF Fulfillment Server Port : 9300
                   Map Viewer Servlet Port : 9800
                   OEM Web Utility Port : 10000
                   VisiBroker OrbServer Agent Port : 10100
                   MSCA Server Port : 10200
                   MSCA Dispatcher Port : 10300
                   Java Object Cache Port : 12345
                   OACORE Servlet Port Range : 16000-16009
                   Discoverer Servlet Port Range : 17000-17009
                   Forms Servlet Port Range : 18000-18009
                   XMLSVCS Servlet Port Range : 19000-19009
    AppsConfig temp dir set to: C:\DOCUME~1\Abhi\LOCALS~1\Temp
    ConfigFilePanel
              Setting temp directory to : C:\DOCUME~1\Abhi\LOCALS~1\Temp <-> C:\DOCUME~1\Abhi\LOCALS~1\Temp\
              Writing configuration file to : C:\DOCUME~1\Abhi\LOCALS~1\Temp\config.txt
    Port Availability Check :
    Database Port Value = 1521...... Available
    RPC Port Value = 1626...... Available
    Forms Listener Port Value = 9000...... Available
    Metrics Server Port Value = 9100...... Available
    Metrics Client Port Value = 9200...... Available
    Forms Servlet Port Range Value = 18000...... Available
    Forms Servlet Port Range Value = 18001...... Available
    Forms Servlet Port Range Value = 18002...... Available
    Forms Servlet Port Range Value = 18003...... Available
    Forms Servlet Port Range Value = 18004...... Available
    Forms Servlet Port Range Value = 18005...... Available
    Forms Servlet Port Range Value = 18006...... Available
    Forms Servlet Port Range Value = 18007...... Available
    Forms Servlet Port Range Value = 18008...... Available
    Forms Servlet Port Range Value = 18009...... Available
    Report Listener Port Value = 7000...... Available
    Web Listener Port Value = 8000...... Available
    Web Listener PLSQL Port Value = 8200...... Available
    Servlet Port Value = 8800...... Available
    JTF Fulfillment Server Port Value = 9300...... Available
    Map Viewer Servlet Port Value = 9800...... Available
    OEM Web Utility Port Value = 10000...... Available
    VisiBroker OrbServer Agent Port Value = 10100...... Available
    MSCA Server Port Value = 10200...... Available
    MSCA Dispatcher Port Value = 10300...... Available
    OACORE Servlet Port Range Value = 16000...... Available
    OACORE Servlet Port Range Value = 16001...... Available
    OACORE Servlet Port Range Value = 16002...... Available
    OACORE Servlet Port Range Value = 16003...... Available
    OACORE Servlet Port Range Value = 16004...... Available
    OACORE Servlet Port Range Value = 16005...... Available
    OACORE Servlet Port Range Value = 16006...... Available
    OACORE Servlet Port Range Value = 16007...... Available
    OACORE Servlet Port Range Value = 16008...... Available
    OACORE Servlet Port Range Value = 16009...... Available
    Discoverer Servlet Port Range Value = 17000...... Available
    Discoverer Servlet Port Range Value = 17001...... Available
    Discoverer Servlet Port Range Value = 17002...... Available
    Discoverer Servlet Port Range Value = 17003...... Available
    Discoverer Servlet Port Range Value = 17004...... Available
    Discoverer Servlet Port Range Value = 17005...... Available
    Discoverer Servlet Port Range Value = 17006...... Available
    Discoverer Servlet Port Range Value = 17007...... Available
    Discoverer Servlet Port Range Value = 17008...... Available
    Discoverer Servlet Port Range Value = 17009...... Available
    XMLSVCS Servlet Port Range Value = 19000...... Available
    XMLSVCS Servlet Port Range Value = 19001...... Available
    XMLSVCS Servlet Port Range Value = 19002...... Available
    XMLSVCS Servlet Port Range Value = 19003...... Available
    XMLSVCS Servlet Port Range Value = 19004...... Available
    XMLSVCS Servlet Port Range Value = 19005...... Available
    XMLSVCS Servlet Port Range Value = 19006...... Available
    XMLSVCS Servlet Port Range Value = 19007...... Available
    XMLSVCS Servlet Port Range Value = 19008...... Available
    XMLSVCS Servlet Port Range Value = 19009...... Available
    Operating System Check
    command : cmd.exe /c F:\Stage11i\startCD\Disk1\rapidwiz\bin\checkOS.cmd
    F:\Stage11i\startCD\Disk1\rapidwiz>echo off
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\Abhi\Application Data
    CLIENTNAME=Console
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=MUNNA
    ComSpec=C:\WINDOWS\system32\cmd.exe
    DISPLAY=:0.0
    FP_NO_HOST_CHECK=NO
    HOME=C:\Documents and Settings\Abhi
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\Abhi
    include=C:\install_soft\MVS\VC98\atl\include;C:\install_soft\MVS\VC98\mfc\include;C:\install_soft\MVS\VC98\include
    lib=C:\install_soft\MVS\VC98\mfc\lib;C:\install_soft\MVS\VC98\lib
    LOGONSERVER=\\MUNNA
    MSDevDir=C:\install_soft\MVS\common\MSDev98
    NUMBER_OF_PROCESSORS=4
    NUTCROOT=C:\INSTAL~1\MKS
    OS=Windows_NT
    Path=C:\INSTAL~1\MKS\bin;C:\INSTAL~1\MKS\bin\x11;C:\INSTAL~1\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\install_soft\MVS\common\Tools\WinNT;C:\install_soft\MVS\common\MSDev98\Bin;C:\install_soft\MVS\common\Tools;C:\install_soft\MVS\VC98\bin
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 37 Stepping 2, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=2502
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    ROOTDIR=C:\INSTAL~1\MKS
    SESSIONNAME=Console
    SHELL=C:\INSTAL~1\MKS\mksnt\sh.exe
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\Abhi\LOCALS~1\Temp
    TERM=nutc
    TERMCAP=C:\INSTAL~1\MKS\etc\termcap
    TERMINFO=C:\INSTAL~1\MKS\usr\lib\terminfo
    TMP=C:\DOCUME~1\Abhi\LOCALS~1\Temp
    TMPDIR=C:\DOCUME~1\Abhi\LOCALS~1\Temp
    USERDOMAIN=MUNNA
    USERNAME=Abhi
    USERPROFILE=C:\Documents and Settings\Abhi
    windir=C:\WINDOWS
    Operating System patch/version test has succeeded
    O/S User and Group Check
    Domain=MUNNA
    ,Username=Abhi
    ,PC-Name=MUNNA
    User belongs to the Administrators Group.
    Port Uniqueness Check :
    All ports are unique.
    File System Check :
    Database ORACLE_HOME available:
    Mount Point = d:\oracle\visdb\9.2.0
    Database ORACLE_HOME admin folder available:
    Mount Point = d:\oracle\visdb\9.2.0\appsutil
    Database ORACLE_HOME temp folder available:
    Mount Point = d:\oracle\visdb\9.2.0\appsutil\temp
    Database Install Log Directory available:
    Mount Point = d:\oracle\visdb\9.2.0\appsutil\log\VIS_munna
    Database Install Out Directory available:
    Mount Point = d:\oracle\visdb\9.2.0\appsutil\out\VIS_munna\templbac
    Database System File Directory available:
    Mount Point = d:\oracle\visdata
    Database Log File Directory available:
    Mount Point = d:\oracle\visdata
    Database Transaction File Directory available:
    Mount Point = d:\oracle\visdata
    Database Archive File Directory available:
    Mount Point = d:\oracle\visdata
    APPL_TOP available:
    Mount Point = d:\oracle\visappl
    APPL_TOP admin available:
    Mount Point = d:\oracle\visappl\admin
    APPL_TOP mount 2 available:
    Mount Point = d:\oracle\visappl
    APPL_TOP mount 3 available:
    Mount Point = d:\oracle\visappl
    APPL_TOP mount 4 available:
    Mount Point = d:\oracle\visappl
    COMMON_TOP available:
    Mount Point = d:\oracle\viscomn
    JAVA_TOP available:
    Mount Point = d:\oracle\viscomn\java
    PORTAL_TOP available:
    Mount Point = d:\oracle\viscomn\portal
    Temp Directory available:
    Mount Point = d:\oracle\viscomn\temp
    APPL_TOP admin Install Log Directory available:
    Mount Point = d:\oracle\visappl\admin\VIS_munna\log
    APPL_TOP admin Install Out Directory available:
    Mount Point = d:\oracle\visappl\admin\VIS_munna\out\templbac
    Apps ORACLE_HOME available:
    Mount Point = d:\oracle\visora\iAS
    Tools ORACLE_HOME available:
    Mount Point = d:\oracle\visora\8.0.6
    File Space Check :
    Disk space on system acceptable :
    Database ORACLE_HOME = d:\oracle\visdb\9.2.0
    required = 2800.0
    actual = 109910.765625
    Disk space on system acceptable :
    Database System File Directory = d:\oracle\visdata
    required = 12009.0
    actual = 107110.765625
    Disk space on system acceptable :
    Database Log File Directory = d:\oracle\visdata
    required = 160.0
    actual = 95101.765625
    Disk space on system acceptable :
    Database Transaction File Directory = d:\oracle\visdata
    required = 28438.0
    actual = 94941.765625
    Disk space on system acceptable :
    Database Archive File Directory = d:\oracle\visdata
    required = 20186.0
    actual = 66503.765625
    Disk space on system acceptable :
    APPL_TOP = d:\oracle\visappl
    required = 5388.0
    actual = 46317.765625
    Disk space on system acceptable :
    APPL_TOP mount 2 = d:\oracle\visappl
    required = 2664.0
    actual = 40929.765625
    Disk space on system acceptable :
    APPL_TOP mount 3 = d:\oracle\visappl
    required = 4667.0
    actual = 38265.765625
    Disk space on system acceptable :
    APPL_TOP mount 4 = d:\oracle\visappl
    required = 2157.0
    actual = 33598.765625
    Disk space on system acceptable :
    COMMON_TOP = d:\oracle\viscomn
    required = 2207.0
    actual = 31441.765625
    Disk space on system acceptable :
    Apps ORACLE_HOME = d:\oracle\visora\iAS
    required = 1130.0
    actual = 29234.765625
    Disk space on system acceptable :
    Tools ORACLE_HOME = d:\oracle\visora\8.0.6
    required = 2425.0
    actual = 28104.765625
    Host/Domain Check
    command : ping -n 1 munna
    Pinging munna.com [192.168.1.100] with 32 bytes of data: Reply from 192.168.1.100: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.1.100: Packets: Sent = 1, Received = 1, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has succeeded
    command : ping -n 1 munna.com
    Pinging munna.com [192.168.1.100] with 32 bytes of data: Reply from 192.168.1.100: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.1.100: Packets: Sent = 1, Received = 1, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host.domain ping has succeeded
    OS Patch Checks
    running command : OSPatchCheck.checkPatch()
    OS = Windows XP OSVersion = 5.1
    No Patch Information available for this Platform
    System Utilities Check
    command : cmd.exe /c F:\Stage11i\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\install_soft\MKS C:\install_soft\MVS\VC98
    F:\Stage11i\startCD\Disk1\rapidwiz>echo off
    Setting environment for using Microsoft Visual C++ tools.
    C:\WINDOWS\system32/cmd.exe
    'which' command is available.
    C:\WINDOWS\system32/gnumake.exe
    'gnumake' is available.
    C:\WINDOWS\system32/cc.exe
    'cc' is available.
    C:\INSTAL~1\MVS\VC98\BIN/link.exe
    'link' is available.
    ERRORCODE = 0 ERRORCODE_END
    System Utilities Availability test has succeeded
    DoInstallPanel - Summary Text
    The Rapid Install Wizard will now install the following:
    DoInstallPanel - User continued install at warning dialog.
    Starting from CD area F:\Stage11i\startCD\Disk1
    There was an error while running the command - cmd /c rmdir /S /Q C:\DOCUME~1\Abhi\LOCALS~1\Temp\rapidinstall
    The system cannot find the file specified.
    RW-50010: Error: - script has returned an error: 2
    Returning - 0
    =======================================================================
    PLEASE HELP ME ..................

    Hi,
    DoInstallPanel - User continued install at warning dialog.At what test you get the warning message?
    Starting from CD area F:\Stage11i\startCD\Disk1
    There was an error while running the command - cmd /c rmdir /S /Q C:\DOCUME~1\Abhi\LOCALS~1\Temp\rapidinstall
    The system cannot find the file specified.
    RW-50010: Error: - script has returned an error: 2Please set the temporary directory to point to C:\temp instead of "C:\DOCUME~1\Abhi\LOCALS~1\Temp\rapidinstall" and run RapidWiz again.
    Regards,
    Hussein

  • IPM server Repository error issue..

    Hi All,
    We are using Invoice gateway for one opf our projects.
    I could able to scan the hard copy and cretae a bacth.
    OFR is creting the pdf, xml and txt file out of the scanned copy and keep it in a folder, so that IPM process them from then on.
    Once IPM processes it and invoke BPEL for further action.
    But IPM is throwig me the below error:
    [2012-05-09T15:32:49.785+05:30] [IPM_server1] [ERROR] [TCM-00162] [oracle.imaging.agents] [tid: [ACTIVE].ExecuteThread: '2' f
    or queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JSkzo^l5Ifs6wjZf6G1FeZj900000E,0] [APP: i
    maging] [dcid: f05c270b0bae50db:-392a3bea:13730f9cd54:-7ff2-0000000000000d86] Failed to load Batch for new filing.
    [2012-05-09T15:32:49.793+05:30] [IPM_server1] [ERROR] [TCM-00157] [oracle.imaging.agents] [tid: [ACTIVE].ExecuteThread: '2' f
    or queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JSkzo^l5Ifs6wjZf6G1FeZj900000E,0] [APP: i
    maging] [dcid: f05c270b0bae50db:-392a3bea:13730f9cd54:-7ff2-0000000000000d86] [arg: /u03/oracle/Middleware/user_projects/doma
    ins/BBECM_DOMAIN/IPM/InputAgent/Input/Stage/TestCase_Invoice_316_204_09052012.txt] An error occurred filing file /u03/oracle/
    Middleware/user_projects/domains/BBECM_DOMAIN/IPM/InputAgent/Input/Stage/TestCase_Invoice_316_204_09052012.txt.[[
    oracle.imaging.ImagingException: TCM-00787: A repository error occurred.
    faultType: SYSTEM
    faultDetails:
    ErrorCode = oracle.stellent.ridc.protocol.ServiceException, ErrorMessage = Unable to execute service IPM_LIST_IMAGI
    NG_AGENTS and function QuserSecurityAttributeByType.
    The error was caused by an internally generated issue. The error has been logged.
    at oracle.imaging.repository.ucm.UcmErrors.convertRepositoryError(UcmErrors.java:128)
    at oracle.imaging.repository.ucm.UcmAgentUserManager.getAgents(UcmAgentUserManager.java:77)
    at oracle.imaging.repository.ucm.UcmAgentUserManager.ensureAgentUserPermissions(UcmAgentUserManager.java:29)
    at oracle.imaging.repository.ucm.UcmRepositoryManager.connect(UcmRepositoryManager.java:411)
    at oracle.imaging.repository.RepositoryManagerFactory.getInstance(RepositoryManagerFactory.java:172)
    at oracle.imaging.repository.RepositoryManagerFactory.getInstance(RepositoryManagerFactory.java:57)
    at oracle.imaging.repository.RepositoryManagerFactory.getInstance(RepositoryManagerFactory.java:91)
    at oracle.imaging.application.ApplicationServiceImpl.getSingleApplication(ApplicationServiceImpl.java:516)
    at oracle.imaging.application.ApplicationServiceImpl.getSingleApplication(ApplicationServiceImpl.java:467)
    at oracle.imaging.application.ApplicationServiceImpl.getApplication(ApplicationServiceImpl.java:348)
    at oracle.imaging.batch.BatchServiceImpl.loadApplication(BatchServiceImpl.java:348)
    at oracle.imaging.batch.BatchServiceImpl.createBatch(BatchServiceImpl.java:70)
    at oracle.imaging.inputagent.InputFilingMDB.loadBatch(InputFilingMDB.java:404)
    at oracle.imaging.inputagent.InputFilingMDB.initializeFiling(InputFilingMDB.java:371)
    at oracle.imaging.inputagent.InputFilingMDB.onMessage(InputFilingMDB.java:166)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    nvocation.java:182)
    n.java:149)
    tionInterceptor.java:131)
    nInterceptor.java:119)
    n.java:171)
    ptor.java:89)
    n.java:171)
    tionInterceptor.java:131)
    nInterceptor.java:119)
    n.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy242.onMessage(Unknown Source)
    at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
    at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
    at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
    at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
    at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
    at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
    at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
    at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    erSecurityAttributeByType.
    The error was caused by an internally generated issue. The error has been logged.
    at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:125)
    at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:101)
    at oracle.imaging.repository.ucm.UcmResponse.<init>(UcmResponse.java:66)
    at oracle.imaging.repository.ucm.UcmRequest.makeOneServiceCall(UcmRequest.java:397)
    at oracle.imaging.repository.ucm.UcmRequest.makeServiceCall(UcmRequest.java:219)
    at oracle.imaging.repository.ucm.UcmAgentUserManager.getAgents(UcmAgentUserManager.java:65)
    ... 41 more
    Can anyone please let me know the solution for the this repository error issue.
    I bounsed the IPM server, but it didnt resolve the problem.
    Thanks in advance
    Chandru

    This seems to be an error due to mapping from IPM. It can be more clear if the text file and screen shot of work flow mapping is uploaded.
    Regards,
    Vikrant Korde

  • TS1368 Has anyone found this article useful?  Any other suggestions to resolve the error, "cannot connect to the itunes store" ?

    Any other suggestions to resolve the error, "cannot connect to the itunes store" ?

    Hi paul.labiche,
    When having iTunes Store connectivity issues, the following articles provide the best solutions:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thanks,
    Matt M.

  • Resolving host error on OSX Yosemite 10.10.1

    Hi,
    I have been facing resolving host error in chrome every 5 minutes for last few weeks. I have tried changing the DNS to 8.8.4.4 etc with no promising results. The issue is faced by mac only as all the other devices seem to connect to the internet just fine. The parental controls are off so even that is not an issue. Any help is appreciated.
    Specs:
    MacBook Air (13-inch, Mid 2013)
    Processor: 1.3 GHz Intel Core i5
    Memory: 4 GB 1600 MHz DDR3

    Bah!!! I have only just experienced this issue (along with a billion other issues in Pages, but I'll leave that for another day!).
    Thank you to all the great suggestions here, which didn't quite work, but led me to something that did.
    I tried this and it didn't quite work:
    "Hi! There seems to be a workaround for this (I've had this problem too, you'd think Apple'd sort it out?!?!)
    At the top of your Pages document is the name of your document. Hover your mouse over this briefly and a drop down arrow will appear. From here you can name the document, give it a Tag and choose the save destination. Click this drop down arrow, and select your save destination from another drop down that will apear. After you have clicked on your selected save destination, click away from the drop down. Then, simply save (Cmd+S OR navigate to file>save) and it will have saved for you!"
    But this worked for me:
    I clicked on the drop down arrow, like suggested above, and changed the document name. Then I clicked on the 'Where' drop down menu and went right down the list and clicked on the 'other...' choice right at the bottom of the list. I chose a different location and then clicked 'Move'
    For some unknown reason this worked for me where the other suggestion didn't quite work.
    I've had to find so many work arounds like this in Pages recently, which you shouldn't have to do!
    The only reason why I am persisting with pages is it save my clickable links when exported to PDF, where the Word program doesn't.
    I hope these issues get sorted before I thrown the computer out the window due to pure frustration!

  • OCI Error ORA-01403: no data found in oracle goldengate replication after tts instaniation

    I recently migrated our tg core system from sun solaris(11.1.0.7) to linux (11.2.0.3) environment using goldengate method (transportable tablespace method used for instantiation).
    The initial replication worked with HANDLECOLLISIONS and after I monitor the lag finished, I took Handlecollisions off and noticed discarded report with OCI Error ORA-01403: no data found in two replications.
    I followed every step in the tts migration steps provided by oracle best practice.
    Can anybody provide any clue how do I fix this issue?
    Thank you in advance.

    extract and replicat are on schema level.
    DO I have to do anything for replication on schema level?
    Basic trandata logging enabled on source.

  • ORA-00600 how to resolve this error?

    I was working on my Oracle 9i database and 6i form server. windows 2003
    my server suddenly restarted and after that oracle showing the error ORA-01033: ORACLE initialization or shutdown in progress...
    I try to resolve this error through this method. I received above mentioned error. please help how to resolve this error. ORA-00600.
    C:\>sqlplus
    SQL*Plus: Release 9.2.0.1.0 -
    Copyright (c) 1982, 2005, Oracle Corporation. All rights reserved.
    Enter user-name: sys as sysdba
    Enter password :[password]
    Shutdown Database
    SQL> shutdown immediate;
    ORA-01109: database not open
    Database dismounted.
    ORACLE instance shut down.
    Startup Database (force)
    SQL> startup force;
    ORACLE instance started.
    Total System Global Area 135338868 bytes
    Fixed Size 453492 bytes
    Variable Size 109051904 bytes
    Database Buffers 25165824 bytes
    Redo Buffers 667648 bytes
    Database mounted.
    ORA-00600: internal error code, arguments: [kcratr1_lostwrt],[],[],[]..................

    There was an instance failure.
    Then you did a clean shutdown using shutdown immediate
    After that, was there any need for giving startup force.
    Because that command starts up the database and shuts it down in abort mode, and then starts the database with an instance
    recovery.
    You should have tried a direct startup also before trying to attempt forceful startup.
    *Startup force needs to be used with care.
    For carrying out normal startup, simply typing startup will do.
    Startup force is being used, when you want to refresh the already running database and facing issues like database showing errors while shutting down before starting up again.
    Startup force actually, crashes the instance (just like shutdown abort) and then start your database normally. This do require instance level recovery.*
    ORA-00600 are thrown when some internal errors happen. Ideally you should contact Oracle for metalink. For a first level step of troubleshooting, you can search in metalink
    like what others said here.

  • TS3683 I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013.  I keep getting the error message "iTunes could not back up iPad "" because an error have occurred."  Any suggestions on what I can do to resolve this error?

    I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013.  I keep getting the error message "iTunes could not back up iPad "" because an error have occurred."  Any suggestions on what I can do to resolve this error?

    Hi there BuffaloSailor!
    I have an article here with some troubleshooting suggestions for this issue:
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/ts2529
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • The ipad"ipad" could not be restored. An unknown error occured (16). How do I resolve this error?

    The ipad"ipad" could not be restored. An unknown error occured (16). How do I resolve this error?

    Your error code falls within the 10-47 range mentioned here.
    Check for hardware issues
    Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Error 1015 might happen after making unauthorized modifications to iOS, also called "jailbreaking."
    Use recovery mode to restore your device
    Related errors: 1015, “The required resource can't be found.”
    You might see these error messages if your device has a beta version of iOS or if you're installing an older version of iOS (downgrading). Use recovery mode to restore your device to the latest version of iOS.
    Quit virtualization software
    Quit any virtualization software (such as Parallels or VMware) that’s running on your Mac. Then use the latest version of iTunes to restore your device.

  • OCICollAppend(.)  fails &  OCICollSize(.) fails  : OCI Error : 21500, 21560

    Hi,
    My aggregate member function output/OUT parameter is a nested table or collection : table_out1 :
    table_out1 TABLE OF NTAB_TYPE
    Name Null? Type
    EMPNO NUMBER
    SALARY NUMBER
    TST CHAR(10)
    TE CHAR(10)
    And this table_out1 is not part/column of any database table.
    I am just using this table_out1 instance : returnValue : as a empty collection initially and then I am appending elements or objects
    of type : NTAB_TYPE into this collection and then outputting the results(the entire collection items) directly to the sql prompt
    after the completion of the ODCIAggregateTerminate member function. I am creating the new Objects by iterating through a set p :
    and then corresponding creating objects using : OCIObjectNew(...)
    But my problem is the OCICollSize(..) fails and throws an error : ORA-21500 or ORA-21560 .....
    If I still go further and execute the OCICollApend(..) then it fails at that moment and gives me the same ORA-21500 or ORA-21560.
    It fails at the very first element or when I am trying to append for the first time as the collection is empty.
    The elem & elemind of OCICollAppend() : respectively : tmp & tmp_ind in my function ODCIAggregateTerminate are not null as I can check
    them in my code ..So may be I am suspecting that the collection being empty it is throwing the error : but since in my case the collection
    is an OUT/Output parameter so it should successfully append but it is not happening so..
    When I check the OCI Collection size of returnValue : table_out1 : the value is nested_table size : 134580616
    member function ODCIAggregateTerminate(
    self IN OUT MinDistanceImpl, returnValue OUT table_out1,
    flags IN number)
    return number
    as language C
    library custagg name "ODCIAggregateTerminate"
    with context
    parameters (
    context,
    self,
    self INDICATOR STRUCT,
    returnValue ,
    returnValue INDICATOR,
    flags,
    flags INDICATOR ,
    RETURN ),
    typedef OCITable table_out1;
    struct ntab_type
    OCINumber empno;
    OCINumber salary;
    OCIString * tst;
    OCIString * te;
    typedef struct ntab_type ntab_type;
    struct ntab_type_ind
    OCIInd _atomic;
    OCIInd empno;
    OCIInd salary;
    OCIInd tst;
    OCIInd te;
    typedef struct ntab_type_ind ntab_type_ind;
    extern "C" OCINumber * ODCIAggregateTerminate(
    OCIExtProcContext *context,
    MinDistanceImpl * self,
    MinDistanceImpl_ind * self_ind,
    table_out1 * returnValue,
    short * returnValue_ind,
    OCINumber * flags,
    short flags_ind)
    ......Some previous code goes here...................
    ntab_type * tmp = (ntab_type *) 0;
    ntab_type_ind * tmp_ind = (ntab_type_ind *) 0;
    returnValue = (table_out1 *) 0; // Can comment this : as it does not make any difference
    OCIType out_tdo = (OCIType )0;
    set&lt;Outdata*&gt;::iterator it;
    for (it = storedCtx-&gt;l.p.begin(); it != storedCtx-&gt;l.p.end(); it++) {
    fprintf(pFile, " in term set is : salary : %d , s.end : %s", (*it)-&gt;salary, (*it)-&gt;iend);
    fflush(pFile);
    int sal = (*it)-&gt;salary;
    char time = (char )malloc(10*sizeof(char) + 1);
    strcpy(time,(*it)-&gt;iend);
    static sword status = 0;
    if(( status = OCITypeByName(handles.envhp, handles.errhp, handles.svchp, (const text *) "SYS", (ub4) strlen("SYS"),
    (const text *) "NTAB_TYPE", (ub4) strlen("NTAB_TYPE"), (text *)0, (ub4) 0,
    OCI_DURATION_SESSION, OCI_TYPEGET_ALL, &out_tdo)) != OCI_SUCCESS)
    fprintf (pFile, "Ocitypename - Fail\n");
    fflush(pFile);
    checkerr(&handles, status);
    if((status = OCIObjectNew(handles.envhp,handles.errhp,handles.svchp, OCI_TYPECODE_OBJECT, out_tdo, (dvoid *)0,
    OCI_DURATION_SESSION, TRUE, (dvoid**)&tmp)) != OCI_SUCCESS)
    fprintf (pFile, "OCIOBJECTNEW - Fail\n");
    fflush(pFile);
    checkerr(&handles, status);
    OCINumberFromInt( handles.errhp,&sal,sizeof(int),OCI_NUMBER_SIGNED, &tmp-&gt;empno);
    if (checkerr(&handles, OCINumberFromInt( handles.errhp,&sal,sizeof(int),OCI_NUMBER_SIGNED,&tmp-&gt;salary)))
    int success = ODCI_SUCCESS;
    OCINumberFromInt( handles.errhp,&success,sizeof(int),OCI_NUMBER_SIGNED,returned );
    *returnValue_ind = OCI_IND_NULL;
    return returned;
    if (checkerr(&handles, OCIStringAssignText(handles.envhp,handles.errhp, (CONST text *) time, strlen(time), &tmp-&gt;tst)))
    int success = ODCI_SUCCESS;
    OCINumberFromInt( handles.errhp,&success,sizeof(int),OCI_NUMBER_SIGNED,returned );
    *returnValue_ind = OCI_IND_NULL;
    return returned;
    if (checkerr(&handles, OCIStringAssignText(handles.envhp,handles.errhp, (CONST text *) time, (ub2)strlen(time), &tmp-&gt;te)))
    int success = ODCI_SUCCESS;
    OCINumberFromInt( handles.errhp,&success,sizeof(int),OCI_NUMBER_SIGNED,returned );
    *returnValue_ind = OCI_IND_NULL;
    return returned;
    char * ctst1 = (char *)OCIStringPtr(handles.envhp, tmp-&gt;tst);
    char * cte1 = (char *)OCIStringPtr(handles.envhp, tmp-&gt;te);
    fprintf(pFile, "from ctst1 & cte1 values");
    tmp-&gt;tst : %s | tmp-&gt;te : %s | \n", ctst1, cte1);
    fflush (pFile);
    if(tmp_ind==OCI_IND_NOTNULL)
    fprintf(pFile, " Oci tmp_ind not null...\n");
    fflush(pFile);
    else {
    fprintf(pFile, " After OCI tmp_ind is NULL ...\n");
    fflush(pFile);
    sb4 sz;
    if((status = OCICollSize(handles.envhp, handles.errhp,(CONST OCIColl *) returnValue, &sz)) != OCI_SUCCESS)
    fprintf (pFile, "nested_table size error : %d\n", (int)sz);
    fflush(pFile);
    checkerr(&handles, status);
    else {
    fprintf (pFile, "nested_table_returnValue_size : %d\n", (int)sz);
    fflush(pFile);
    if (( status = OCICollAppend(hand*les.envhp, handles.errhp, (CONST dvoid *)tmp, (CONST dvoid *)tmp_ind, (OCIColl *)returnValue))
    != OCI_SUCCESS)
    fprintf (pFile, "OCICollAppend - Fail\n");
    fflush(pFile);
    checkerr(&handles, status);
    writing some status info of the program to the file : ( I deleted few printf statements in the above code..)
    In ODCIAggregateTerminate Function!
    in term set is : salary : 99 , s.end : 1999-10-10 sal value is : 99 After initializing sal is : 99 , time : 1999-10-10
    ******************Ocitypename - successfully done ***********************
    **************before tmp_ind---&gt; oci-ind-null ***********************
    ***************after tmp_ind---&gt; oci-ind-null ***********************
    OCIObjectNew created successfully
    Before OCI Number conversion :
    Before OCIstringassign text convs...terminate para....
    After oci string assign text for tmp.tst...
    After oci string assign text for tmp.tst...
    After oci string assign text for tmp.te...
    from ctst1 & cte1 values-----
    tmp-&gt;tst : 1999-10-10 | tmp-&gt;te : 1999-10-10 |
    Oci tmp_ind not null...
    nested_table size error : 134580616
    ****************************In checkerr module *********************************************!
    OCI error code 21500
    ****************************closing of checkerr module *********************************************!

    Hey,
    Now I am able to append or add elements to the collection(OCITAble *). And it does not throw any error but the collection size is zero and collection is empty even after issuing OCICollAppend(...) .
    I don't understand why is it happening so. I tried looking for almost 2-3 days and could not figure out what was happening....
    Can any one suggest me some thing what is going on ... ...

  • Plz help to resolve this error during installation of EBS 11i

    plz any one can help me to resolve this mentioned issued on last two lines......
    error--- RW-50010: Error: - script has returned an error: 2
    running command : OSPatchCheck.checkPatch()
    OS = Windows XP OSVersion = 5.1
    No Patch Information available for this Platform
    System Utilities Check
    command : cmd.exe /c G:\DISK1\RAPIDWIZ\bin\adchkutl.cmd c:\MKSTOOL\mksnt c:\MSVC\VC98
    G:\DISK1\RAPIDWIZ>echo off
    Setting environment for using Microsoft Visual C++ tools.
    C:\WINDOWS\system32/cmd.exe
    'which' command is available.
    C:\WINDOWS\system32/gnumake.exe
    'gnumake' is available.
    c:\MKSTOOL\mksnt/cc.exe
    'cc' is available.
    C:\MSVC\VC98\BIN/link.exe
    'link' is available.
    ERRORCODE = 0 ERRORCODE_END
    System Utilities Availability test has succeeded
    DoInstallPanel - Summary Text
    The Rapid Install Wizard will now install the following:
    DoInstallPanel - User continued install at warning dialog.
    Starting from CD area G:\DISK1
    There was an error while running the command - cmd /c rmdir /S /Q C:\WINDOWS\TEMP\rapidinstall
    The system cannot find the file specified.
    RW-50010: Error: - script has returned an error: 2
    Returning - 0

    Only one log file created. File entries attached below
    ++++
    Disk space on system acceptable:
    Database System File Directory = E:\oracle\VIS\db\apps_st\data
    required = 16780.0
    actual = 377201.943359375
    Disk space on system acceptable:
    Database Log File Directory = E:\oracle\VIS\db\apps_st\data
    required = 3086.0
    actual = 360421.943359375
    Disk space on system acceptable:
    Database Transaction File Directory = E:\oracle\VIS\db\apps_st\data
    required = 64649.0
    actual = 357335.943359375
    Disk space on system acceptable:
    Database Archive File Directory = E:\oracle\VIS\db\apps_st\data
    required = 44142.0
    actual = 292686.943359375
    </p>
    <p>
    -- apps node space checks --
    </p>
    <hr />
    <p>
    Disk space on system acceptable:
    APPL_TOP = E:\oracle\VIS\apps\apps_st\appl
    required = 5232.0
    actual = 248544.943359375
    Disk space on system acceptable:
    APPL_TOP mount 2 = E:\oracle\VIS\apps\apps_st\appl
    required = 2362.0
    actual = 243312.943359375
    Disk space on system acceptable:
    APPL_TOP mount 3 = E:\oracle\VIS\apps\apps_st\appl
    required = 7988.0
    actual = 240950.943359375
    Disk space on system acceptable:
    APPL_TOP mount 4 = E:\oracle\VIS\apps\apps_st\appl
    required = 2736.0
    actual = 232962.943359375
    Disk space on system acceptable:
    COMMON_TOP = E:\oracle\VIS\apps\apps_st\comn
    required = 2328.0
    actual = 230226.943359375
    Disk space on system acceptable:
    Apps ORACLE_HOME = E:\oracle\VIS\apps\tech_st\10.1.3
    required = 1069.0
    actual = 227898.943359375
    Disk space on system acceptable:
    Tools ORACLE_HOME = E:\oracle\VIS\apps\tech_st\10.1.2
    required = 926.0
    actual = 226829.943359375
    Host/Domain
    </p>
    <hr />
    <p>
    command: ping -n 1 leon
    </p>
    <p>
    </p>
    <p>
    Pinging Leon.apxm.com http://10.10.10.10 with 32 bytes of data:
    </p>
    <p>
    Reply from 10.10.10.10: bytes=32 time&lt;1ms TTL=128
    </p>
    <p>
    Ping statistics for 10.10.10.10:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    </p>
    <p>
    host ping has succeeded
    command: ping -n 1 leon.apxm.com
    </p>
    <p>
    </p>
    <p>
    Pinging Leon.apxm.com http://10.10.10.10 with 32 bytes of data:
    </p>
    <p>
    Reply from 10.10.10.10: bytes=32 time&lt;1ms TTL=128
    </p>
    <p>
    Ping statistics for 10.10.10.10:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    </p>
    <p>
    host.domain ping has succeeded
    System Utilities
    </p>
    <hr />
    <p>
    command: cmd.exe /c C:\Stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin\bin C:\MSVS8\MSVC\bin
    </p>
    <p>
    C:\Stage12\startCD\Disk1\rapidwiz&gt;echo off
    /cygdrive/c/WINDOWS/system32/cmd
    'which' command is available.
    /usr/bin/gnumake
    'gnumake' is available.
    /usr/bin/cl
    'cc' is available.
    /usr/bin/link
    'link' is available.
    ERRORCODE = 0 ERRORCODE_ENDThe system cannot find the path specified.
    </p>
    <p>
    System Utilities Availability test has succeeded
    AllNodesPanel
    </p>
    <hr />
    Service Name: leon
    Node Name: _leon<br />
    Operating System: _Windows (32-bit)<br />
    Service Name: leon
    Node Name: _leon<br />
    Operating System: _Windows (32-bit)<br />
    <strong>DoInstallPanel - Summary Text</strong>
    <strong>The Rapid Install Wizard will now install the following:</strong>
    <p>
    <strong>DoInstallPanel - User continued install at warning dialog.</strong>
    <strong>-----------------------------------------</strong>
    <strong>Starting from CD area C:\Stage12\startCD\Disk1</strong>
    <strong>RW-50010: Error: - script has returned an error: 2</strong>
    <strong>Returning - 0</strong>
    +++++++
    </p>

  • OGG-00665  OCI Error executing single row select (status = 4060-ORA-04060:

    Unable to start Replica. Is it Oracle user permission issue ?
    ERROR OGG-00665 OCI Error executing single row select (status = 4060-ORA-04060: insufficient privileges to execute DBMS_STREAMS.SET_TAG
    ORA-06512: at "SYS.DBMS_STREAMS", line 16
    ORA-06512: at line 1), SQL<BEGIN dbms_streams.set_tag(:1); END;>.
    ERROR OGG-01668 PROCESS ABENDING.

    Operating System Version:
    Linux
    Version #1 SMP Sat Feb 25 16:26:29 EST 2012, Release 2.6.18-308.0.0.0.1.el5xen
    Node:
    Machine: x86_64
    soft limit hard limit
    Address Space Size : unlimited unlimited
    Heap Size : unlimited unlimited
    File Size : unlimited unlimited
    CPU Time : unlimited unlimited
    23,0-1 Top
    Process id: 7662
    Description:
    ** Running with the following parameters **
    2013-05-01 10:06:13 INFO OGG-03059 Operating system character set identified as UTF-8.
    2013-05-01 10:06:13 INFO OGG-02695 ANSI SQL parameter syntax is used for parameter parsing.
    replicat robey
    userid test12, password ********
    Source Context :
    SourceModule : [ggdb.ora.sess]
    SourceID : [*/aime1/adestore/views/aime1_*/oggcore/OpenSys/src/gglib/ggdbora/ocisess.c]
    SourceFunction : [oci_try]
    SourceLine : [790]
    ThreadBacktrace : [18] elements
    : [*/*/OGGCOREMAINBACKTEST/libgglog.so(CMessageContext::AddThreadContext()+0x26) [0x2af5c09b67f6]]
    : [*/*/OGGCOREMAINBACKTEST/libgglog.so(CMessageFactory::CreateMessage(CSourceContext*, unsigned int, ...)+0x28f) [0x2af5c09ae90f]]
    : [/*/*/OGGCOREMAINBACKTEST/libgglog.so(_MSG_ERR_ORACLE_OCI_ERROR_WITH_DESC_SQL(CSourceContext*, int, char const*, char const*, char const*,
    CMessageFactory::MessageDisposition)+0x64) [0x2af5c09787d4]]
    : [*/*/OGGCOREMAINBACKTEST/replicat(OCISESS_context_def::oci_try(int, char const*, ...)+0x3ee) [0x788aae]]
    : [*/*/OGGCOREMAINBACKTEST/replicat(query_handle::exec_stmt(bool, int)+0x19a) [0x79664a]]
    : [*/*/OGGCOREMAINBACKTEST/replicat(OCISESS_context_def::setTag(ggs::gglib::ggunicode::UString const&, bool)+0x25a) [0x787d5a]]
    : [*/*/OGGCOREMAINBACKTEST/replicat(OCISESS_context_def::init_context(int, int)+0x410) [0x78f230]]
    : [/*/*/OGGCOREMAINBACKTEST/replicat(DBOCI_init_connection_logon(ggs::gglib::ggapp::CLoginName const&, ggs::gglib::ggapp::CDBObjName<(DBObjType)12>
    const&, char const*, int, int, int, char*)+0x136) [0x76c566]]
    : [*/*/OGGCOREMAINBACKTEST/replicat [0x740479]]
    : [*/*/OGGCOREMAINBACKTEST/replicat [0x746f91]]
    : [*/*/OGGCOREMAINBACKTEST/replicat(odbc_param(char*, char*)+0x364) [0x74a5f4]]
    : [*/*/OGGCOREMAINBACKTEST/replicat(get_infile_params(time_elt_def*, time_elt_def*, char**)+0x959f) [0x57af1f]]
    : [*/*/OGGCOREMAINBACKTEST/replicat(replicat_main(int, char**)+0x152) [0x5de8c2]]
    : [*/*/OGGCOREMAINBACKTEST/replicat(ggs::gglib::MultiThreading::MainThread::ExecMain()+0x6f) [0x7249af]]
    : [*/*/OGGCOREMAINBACKTEST/replicat(ggs::gglib::MultiThreading::MainThread::Run(int, char**)+0x127) [0x724d57]]
    : [*/*/OGGCOREMAINBACKTEST/replicat(main+0x4a) [0x5dafba]]
    : [lib64/libc.so.6(__libc_start_main+0xf4) [0x3f4da1d994]]
    : [*/*/OGGCOREMAINBACKTEST/replicat [0x4c70a9]]
    2013-05-01 10:06:13 ERROR OGG-00665 OCI Error executing single row select (status = 439-ORA-00439: feature not enabled: Streams Capture
    ORA-06512: at "SYS.DBMS_STREAMS", line 7
    ORA-06512: at line 1), SQL<BEGIN dbms_streams.set_tag(:1); END;>.
    2013-05-01 10:06:13 ERROR OGG-01668 PROCESS ABENDING.

  • OGG-00663 OCI Error retrieving

    Hi experts,
    WARNING OGG-00869 Failed to retrieve column list handle for table hr.NEW_TABLE
    OGG-00663 OCI Error retrieving bind info for query (status = 100), SQL <Not available>
    error in process replicat
    config in replicat
    replicat orarep
    userid hr,password ******
    sourcedefs /u02/Dgolden/dirdef/hr.def
    map "hrschema","New Table" , target "hr","NEW_TABLE" , colmap (usedefaults,TEST_RowID=TEST_ROWID,"TEST Type"=TEST_TYPE)
    use V.11.2.0.1
    Thank you

    Hi,
    I would do the following to find out the issue :
    1. Lock table in target
    2. Enable replicat (replicat should be locked if the issue is due to making the change to the table)
    3. Find out replicat sid and check out sql statement.
    If replicat is not locked, then I would trace replicat sid...
    HTH

  • Please resolve the Error:Element Entry over laps with another entry of the same type

    Hi Buddies,
                    I have been trying to resolve the error : Element Entry over laps with another entry of the same type while entering salary to an employee.
    I have tried to resolve this issue by created a new salary basis with new element. But still I could not make it.
    Please let me know how to move forward? Thanks for your help.
    Thanks
    Ganesh kumar M

    Hi Ganesh,
    We have a similar post which have some recommendation. please go through the comments and check if it helps.
    https://forums.oracle.com/thread/2440864
    Thanks,
    Sanjay

Maybe you are looking for

  • Problem in Updating - Back order job

    Hi Gurus, We have some users get sporadically update errors with error message u2018Error calling up function module CHECK_PLANTS_ABROu2019, but the serious problem is the background job u2019BACKORDER PL03 NORMAL dddu2019. Itu2019s not completed sin

  • Slow Query (How to make it faster?)

    Hi, Below is the query: select sum(sl.RRC_CONN_STP_ATT) ca, from PV_WCEL_SERVICE_LEVEL sl, UTP_MO um where sl.global_id = um.co_gid and '2006120713' = to_char(sl.starttime,'yyyymmddHH24') and '1' = nvl(substr(um.co_object_instance, 5,1),0) This state

  • Multiple Editors For One Calendar??? Please Help!

    Is there any way at all to allow more than one person to edit a single calendar? I'd like to be able to keep a calendar for my boss that both he and I can update from our respective machines. Any help is very much appreciated. Thanks!

  • Is there a way to sync my android to the cloud and than to my iPad?

    I want to be able to use a calendar for both devices that I can sync.  So I don't have two different calendars to keep updating on two differnt devices.  Or do I have to get an iPhone?

  • I am unable to retrieve my emails.

    Hello Eric, Thanks for the info.  I am still trying to fix it.