Resolving times out on all servers

Hi,
For some reason, my Arch VMs are all unable to resolve hostnames during pacman sync:
vagrant@archlinux:~$ sudo pacman -Syyu
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from arch.serverspace.co.uk : Resolving timed out after 10555 milliseconds
error: failed retrieving file 'core.db' from archlinux.mirrors.uk2.net : Resolving timed out after 10566 milliseconds
error: failed retrieving file 'core.db' from mirror.bytemark.co.uk : Resolving timed out after 10541 milliseconds
error: failed retrieving file 'core.db' from mirror.cinosure.com : Resolving timed out after 10713 milliseconds
error: failed retrieving file 'core.db' from mirrors.manchester.m247.com : Resolving timed out after 10571 milliseconds
error: failed retrieving file 'core.db' from www.mirrorservice.org : Resolving timed out after 10546 milliseconds
Otherwise, however, all those hostnames resolve:
vagrant@archlinux:~$ ping arch.serverspace.co.uk
PING arch.serverspace.co.uk (130.180.200.19) 56(84) bytes of data.
64 bytes from arch.serverspace.co.uk (130.180.200.19): icmp_seq=1 ttl=63 time=10.8 ms
For what it's worth, these are vagrant VMs running on Virtualbox. And they never had this problem before. Very strange. Any advice?

I had the same problem today after using the --clean option with Sync. About a quarter of an hour later it worked again, seemingly without any reason.

Similar Messages

HT204053 Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id. do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)

Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id. do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)

There is no problem about using one ID for iTunes, iTunes in the Cloud and iTunes Match, and another for iCloud and its email and syncing facilities. This way you can all use the same iTunes account but have separate emails and calendars etc.

Dreamweaver CC suddenly (yesterday) stopped viewing web pages via F12 key. the browser opens but times out on all browsers now

I have been running Dreamweaver since 2008 (CS). I have a server on the local network that I save my work on and remotely connect to it via a mapped network drive W while in Dreamweaver. When Dreamweaver starts it loads via the site the mapped drive contents. It shows the files and folders of clients I am currently working on. Up until yesterday I was able to open a folder in Dreamweaver CC, work on a file and to view it in a browser, I would of course save the current changes and press the F12 key to bring up the browser and display the web page in full screen view. I never used the live view button on the Dreamweaver menu before, I only pressed the F12 key to see the browser in full screen and display the html page.
However since yesterday when I press the F12 key any of my browsers (Firefox 29.01, Internet Explorer 11, Opera (latest), Safari (latest) and Chrome (latest) only open and Time Out.
I am running Windows 8.1 update
I am running Adobe Cloud CC for my Adobe Products
Attempted Fixes to date:
I have searched online forums
I have uninstalled Dreamweaver CC and re installed it
I again uninstalled and reinstalled Dreamweaver CC and deleted the profile settings
I have contacted Adobe support but they said the F12 key worked so cannot help any more
I still have the same problem.
The only way to view these files in a browser is to right click the file and select open with and select the browser to check it with.
Can anybody help me as I have been running my current set up since 2008 without any issues.

Can you verify that the shortcut key is assigned properly for browser preview here:
If it isn't, Click the last option 'Edit Browser List' > edit the settings in the preferences tab:
This will ensure that your keyboard shortcut is mapped properly.
If the setting in 1st screenshot shows the shortcut properly, but still isn't loading, you could try trashing your cache: Deleting a corrupted cache file
Let us know how it goes.

Changing Domain Administrator Password : How can I find out what all servers / services are currently using this?

Good morning all,
I took over as IT director for the school district in my town about 2 years ago, and we've had some techs come and go, all of which have had the domain administrator password (not my call, but my fault for not changing it by now). I am about to change
it, but before doing so I want to know how I can make sure what all this will break so I can quickly change the cached/saved password on whatever supporting services use this user/pass.
Can anyone help here?
Thank you!

Hello,
In my point of view if I were in this situation I would Change the domain administrator password. By
Resetting the domain administrators all the services which use domain administrator as their logon user, will lose their functionality. I had this experience and I did change the domain administrator password with no problem. However do not
forget to have a account lockout tool or script for locating the place where the account was locked out.
But to keep it short most of the time. lockout problems are arise from mapped drives, credential manager and saved RDP sessions and etc.
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

My fire fox 3 and now 4 work fine, except it times out on ALL search engines?

also cant access my yahoo account?

hello, could you provide your latest few submitted crash reports? please enter '''about:crashes''' into the location bar, copy the latest few report ids from there starting with '''bp-''' & paste them here into a forum reply. this will give us a better understanding what may be triggering those crashes.

Itunes update to firmware fails, because connection times out.

I have been unsuccessfully attempting to update my iphone 3gs and ipad to iOS 5 for over a month now. I have spent many, many hours on this, and many phone calls to apple support. I disable Norton 360, and windows firewall, and my firewall on my router. I've tried updating my router's firmware, which bricked the router--thanks apple for insisting this was the problem, and I have replaced the router, with a new one. Itunes diagnostics gives me the following information. I am using itunes as the administrator in Windows 7, 64 bit, although itunes doesn't recognize it, unless I reinstall it as the administrator, but then once I restart the computer, itunes no longer recognizes that I using Windows as an admin.
Also, the firmware cannot update, because the connection times out, despite all my firewalls, and antivirus being turned off.
I've tried downloading iOS 5 and then updating using restore, but that didn't work. I've poured through support forums, and error codes: I get 1611, etc. Cannot seem to resolve this.
Any ideas?
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0040A7BC031F98E0
Current user is not an administrator.
The current local date and time is 2011-11-15 11:35:00.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
The drive F: HL-DT-ST DVDRAM GP08LU30 Rev 1.00 is a USB 1 device.
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {01DC2EA3-0DD0-4A51-80A6-7B414E4C6291}
Description:          Realtek PCIe GBE Family Controller
IP Address:          192.168.2.2
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.2.1
DHCP Enabled:          Yes
DHCP Server:          192.168.2.1
Lease Obtained:          Tue Nov 15 11:32:39 2011
Lease Expires:          Tue Nov 15 11:32:38 2011
DNS Servers:          192.168.2.1
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-15 11:33:52.

Disable your firewall/security software and try again.

New condition type print preview time out.

Dear all,
I am a ABAPer.
I am facing one problem in PO Print preview.
My MM consultant defines one new condition type-ZPF5 .
Instead of ZPF2 we are using this condition type- ZPF5.
After that in PO ,Net value & everything coming fine.
There is a smartform also related to this.
I have added all logic related to ZPF5 .
But when going to print preview In production & clicking on print preview,
It is giving time out after 9-10 mint-Time out for ALL po,not only for this condition related .
v_no = &SFSY-JOBPAGES& -1. "in this line.
&SFSY-JOBPAGES& means " Total number of pages in the currently formatted print request.
I saw M/08 - ZPF5 Print equal to 'X ' & Statistics is ticked for this.
But when I revert back old SMART FORMS & PRINT = blank,print preview is coming fine for all PO except
ZPF5 Is not affecting in print preview,but in PO affecting.
Any help from MM side?
Thanks
Gourav.

Dear all,
Issue resolved.
I have changed my select query & remove old condition from that,now I am using only ZPF5.
Like :
SELECT SINGLE KBETR KWERT KRECH FROM KONV INTO (V1_KBE,V_PF,V_KREC)
         WHERE KNUMV EQ V_KNUM AND
               KPOSN EQ WA_MAT-EBELP AND
               KSCHL EQ 'ZPF5'. " not zpf2
Thanks all for your time.
Thanks
Kumar Gourav.

Time out expiring issue in a Vi

Error 1073807339has occured at a VISA READ function in a Vi . Error message says "Time out expired before operation" . How can we resolve this issue - THANKS

Under Instruments I/O/VISA/VISA advanced palette you will find VISA Set Timeout (a property node with a small clock upon it): you can use it to establish a timeout large enough for your instrument to respond.
A problem can arise if your instrument is fast to respond to some messages and slow for others; in that case you must decide what to do:
- either set a large time out for all messages, but you can catch a large waiting time when you don't expect this
- or changing the time out limit from time to time, which NI says that can some way reduce the performance of your application (it depends on the volume of traffic and the frequence of this setting changing).
Roberto
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Apple Mail fetch repeatedly times out

This is not a specific Lion problem but has continued under Lion, it's related to Apple Mail. On each of our 4 Macs our mail fetch from our ISP frequently times out on all POP email accounts, repeatedly asking for a password even though the password is clearly stored in Mail preferences and Keychain. Sometimes I find that the POP email passwords are deleted from Mail, although they are always there in the Keychain. It only happens with POP, not IMAP etc. Needless to say our ISP has been vague and unhelpful. Any suggestions?

Even if it happens from outside their network, your mail still uses the same settings for servers and ports as to what you put into the settings. So, it's still routed through them regardless of the network your on. That why I suggested it may be the cause. Like I said, the same problem went on with ATT for many months.
There were many thoughts also on how mac mail was talking to the ISP, but in my case wasn't the problem. If you open up connection doctor in mail and test the connections from time to time, it failed in many cases. Sometimes, it failed constantly.
And since you've said it happens outside your network, that should eliminate your router.
So, you may want to talk with your ISP support group and ask them if they are making any changes to ports or servers. And if you haven't, check their website and search for mail server and port settings for mac to make sure you have the latest.
And I do understand that it's probably a wasted effort because most of the time they won't know what's going on.
I feel your pain.

10 min ftp time out!! help!!

This is a fairly old story, it begins around 2004 – 05 ish…
For over two years, two different linksys wrt54g routers (v5 & v6), and 3 different cable providers I have continually had the same problem; ftp sessions beyond my local network constantly time out during file transfers at exactly 9 minutes and 59 seconds. This timeout occurs every single time no matter what. I have tried multitudes of different ftp softwares, several different computers as well as four different operating systems. (win 98, XP, mac OS, & vista) I also run a ftp server to share files among my friends both on and off my local network. People who connect to me do not have this time out problem as long as my server runs on port 21 and only 21 (any other port and my friends have the 9:59 time out too). For clarity’s sake let me repeat; ftp problem only occurs from sessions where one of my computers is a client and not a host. Also please note the time out will happen on any port. Because of said fact, this leads me to only one possible conclusion all wrt54g’s have lousy ftp support...!
I hope that there is something I have missed; should I toss in the towel and buy a third, new router of a different manufacturer this time or is there still hope? Please note: aside from the constant ftp time out issue, the wrt54g works pretty well and has always been reliable for every other task. (ftp, usenet, pop3 e-mail, p2p, http, etc…)
Some info about my network:
I am using a linksys WRT54G v5 wireless router with firmware version 1.00.9
My ISP is a 10/100 cable.
I have all router firewall stuff turned off and have DMZ bound to the computer that hosts ftp server. Now I know this makes my network a bit hacker friendly, but these are the only settings that allow people to ftp from me with out time out.
Well that’s about it, if you have read this far then, please, have a great day!

Ok I have connected a windows XP and then a windows Vista machine diretly to my cable modem and I must report no ftp problem at all. I was able to download a huge file on my first try (XP) with no disconnects, entire transfer took 3 hours.
Please note: I have installed the latest firmware on my wrt54g, (1.02.2) and once sucessfully "flashed" I reverted my router back to factory defaults and then re-put my orgional settings in and still must report nojoy.
This is nothing new, I have been trying to resolve this issue for about 1-1/2 to 2 years now. The only reason that I have not switched to a different router is because I like the wrt54gv5 easy setup and good stable performance(port time-out problem aside).
In conclusion let me just state, I don't think there is anything "wrong" with my wrt54gv5. I believe the routers are programmed to drop ports after 10 mins as a safty precaution, I just want to bring light to this issue, and to plead my case to linksys that they make future wrt54g firmware that will allow one to change the interval or disable port time out feaure all together. I don't ftp much anymore as a result of this router's performance, however wrt54gv5 works really great for all other applications that I use it for.
Have a great day!

SAP PORTAL Time-Out Settings / BO iView Reports..?

We have created BO object-specific iView requests in SAP PORTAL based on Ingo's posting....
SAP BusinessObjects Enterprise & SAP Enterprise Portal - Part 3 of 4
Currently, just posting some small CR4E and Analysis for Office (*Design Studio will be added in a few months) report objects that are based on BW queries - and response time is a few seconds.
However, long-term as our BW grows - and the volume of data/periods expands we may see some reduction in the performance of these reports, and they make take a few-minutes to return data.
The SAP Portal team already have an issue with an ECC / T-Code report (*no Business Objects involved) which runs over 100 seconds - and hits a Portal time-out....and are wondering if we would hit the same issue if a CR4E within the Portal ran longer than 100 seconds...?
I think the answer is "NO", the Portal time-out would not apply in that scenario. My assumption is that in our solution-path, the Portal's 100 second time-out rule would ONLY apply to the process of the Portal invoking the iView request - and opening the frame for the CR4E content.
Once the frame is open - and the RPT / Prompt-Screen is loaded the Portal time-out is "happy".
After that iView -> BO frame is established....so, even if the CR4E & BW Query took more than 100 Seconds to return/display the data - the SAP Portal would not time-out - as all of that activity is actually taking place at the BOE Platform layer within the frame (and using the time-out settings at the BOE level).
Can anyone confirm that my assumptions are correct, or explain where the assumption is wrong..?
Thanks in advance...!

In our scenario, the SAP PORTAL has a 100 second time-out, but the Business Objects platform where the CR4E content is hosted has a 600 second time-out for "View on Demand" reporting.
When the SAP PORTAL opens the iView connection, it is opening the CR4E content in a frame on the Portal. Prompts are entered - and the RPT execution begins on the BOE platform.
There is a "spinning-wheel" displayed from the BOE platform, and if run in BO LaunchPad it could run for up to 600 seconds before a time-out occured.
When it is presented in SAP PORTAL via iView connection - does that "spinning-wheel" from BOE Platform provide enough of a "heartbeat" to let the PORTAL know not to drop the connection at 100 seconds....?
My reasoning is that SAP PORTAL should be opening the BOE content with the same rules that apply when the report is opening in the BO LaunchPad.
We are going to create a "SLOW" report in CR4E (*Lots of charts & sub-reports) to test/compare LaunchPad and Portal display of the same report.

Session Time out happens on Win2k Advanced Servers

Hi All,
          I have configured a Admin server and 2 cluster servers. All are on Win 2000
          Advanced Servers. After deploying EJBs to the cluster, when I try to log in
          to our application ( Presentation logic is done by servelets & JSPs ) it
          allows to log in but when I try to click a link to go to another page
          session time out happens. This happens whenever I click a link or browser's
          Refresh button. I have to repeatedly log in.
          Have anyone faced this problem ? Is there a session time out problem with
          WLS6.0 sp2 ?
          Please respond.
          Thanks
          Nalika


Sorry I have fogottoned to add :
          This problem occurs when I try to setup clustering manually as well as, as a
          Win2k service (i.e Admin server & cluster servers as Win2k services)
          "Nalika" <[email protected]> wrote in message
          news:[email protected]..
          > Hi All,
          >
          > I have configured a Admin server and 2 cluster servers. All are on Win
          2000
          > Advanced Servers. After deploying EJBs to the cluster, when I try to log
          in
          > to our application ( Presentation logic is done by servelets & JSPs ) it
          > allows to log in but when I try to click a link to go to another page
          > session time out happens. This happens whenever I click a link or
          browser's
          > Refresh button. I have to repeatedly log in.
          >
          > Have anyone faced this problem ? Is there a session time out problem with
          > WLS6.0 sp2 ?
          > Please respond.
          >
          > Thanks
          > Nalika
          >
          >
          >
          >

HT4628 my powerbook g4 os x 10.5.8 leopard is showing-Connection time out while connecting to the wifi.however it showing all available wifi connections around but not connecting it..however ethernet is working

Problem while connecting with Wi-Fi,
When i am connecting my powerbook g4 leopard to any Wi-fi connection it showing -Connection time out, however Ethernet is working .I have updated all softwares but still same problem.

It's possible that either the internal AirPort Extreme card or the antenna is faulty or has failed.
One last thing to try before going with another Wi-Fi solutions is to the following:
Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)
3. Run the Disk Utility to repair Disk Permissions.
Restart or log out then back in.
4. Turn off the Mac OS X Firewall
System Preferences > Sharing > Firewall
Click the "Stop" button.
5. Create a New User Account
System Preferences > Accounts
Click "+" to add a new account
Log off, then log back on with the new user account.
Try connecting with the AirPort.
If none of these help resolve the issue, you may want to consider getting a USB wireless adapter to replace both the internal card and antenna. One such vendor of these adapters is Other World Computing (OWC).

My Mac book pro keeps saying "connection time out occurred" I have a 2011 pro with all the latest updates. It keeps doing it and it really annoys me! Please help!

My Mac book pro keeps saying "connection time out occurred" I have a 2011 pro with all the latest updates. It keeps doing it and it really annoys me! Please help!

Take each of the following steps that you haven't already tried, until the problem is resolved.
Step 1
Restart the router. Many problems are solved that way.
Step 2
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 3
From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.
Step 4
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 5
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 6
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.

Export Report times out - how do I export all my customers?

We have about 35,000 customers in our BC database.
I'm trying to export them for use in a direct mailing campaign (and other reports for other reasons) but the export always times out.
The reports are very simple; ie.
Custom Report -> Add customer report
Select Customers (Contacts & Companies)
Select CRM ID, Customer Name, Default Address Type
Next
Generate report (no filters)
About 33,000 results are in the report.
I then select Export Report as CSV or Excel and it will sit there for up to an hour or more and do nothing.
Notes:
I keep the session live by having a login in another tab.
Have tried differenty browsers and internet connections.
I even filtered the results (based on create date) and same problem occurred with just 15,000.
How can I export this report and other simple reports I need?
Regards,
Troy.

After Sanjit took a look at this it turns out all I needed to do was to save the report before exporting the results. The export was much quicker and, now we have more cutomers in our database, it actually exports!
Thanks again Sanjit.
Troy.

Resolving times out on all servers

Similar Messages

Maybe you are looking for