Resource Management with Apex

I have seen examples of using dbms_resource_manager with Apex where Apex_public_user has its consumer group switched according to some rule. Trouble is many hundreds of apex users connect using this single username.
What I wish to know is it possible to perform this at a finer level of granularity, ie at individual Apex user level.
If so I control the resources available to Apex users individualy.
Is this even a sensible thing to do? Criticisms are welcome.

Hi Tony,
I would be interesting to see any example.
I posted my question before: Creating interactive gantt chart in apex 4
but no one give any answer yet.

Similar Messages

MQSeries as a Transactional Resource Manager with Weblogic Server

          I am trying to setup the example given in the BEA white paper:
          Using MQSeries as a Transactional Resource Manager with Weblogic Server.
          Version 1.
          October 25, 2001.
          I followed the instructions given in the documents, but when i run client program
          >java MQClient t3://localhost:7001 "MQSeries test"
          I received the following exception below. Does anyone how what is the reason for
          this exception(s) and how i can solve the problem? My MQSeries Server and Weblogic
          6.1 sp2 are installed on seperate NT machines. I installed the MQSeries classes
          for java and the MQSeries classes for Java Message Service on the weblogic
          server machine.
          sending: "MQSEries test"
          Exception in thread "main" java.rmi.ServerError: A error occurred the server; ne
          sted exception is:
          java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          Start server side stack trace:
          java.rmi.ServerError: A error occurred the server; nested exception is:
          java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
          at java.lang.Runtime.loadLibrary0(Runtime.java:749)
          at java.lang.System.loadLibrary(System.java:820)
          at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
          at java.security.AccessController.doPrivileged(Native Method)
          at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
          at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
          at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
          at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
          149)
          at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
          tion(MQBindingsManagedConnectionFactoryJ11.java:139)
          at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
          ion(MQBindingsManagedConnectionFactoryJ11.java:157)
          at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
          a:80)
          at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
          ctionManager.java:150)
          at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
          a:666)
          at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
          at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
          at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
          at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
          at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
          at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
          at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
          at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
          at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
          AQueueConnectionFactory.java:53)
          at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
          QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
          at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
          at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
          at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
          at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
          at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
          a:267)
          at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
          .java:22)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          End server side stack trace
          ; nested exception is:
          java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          Start server side stack trace:
          java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
          at java.lang.Runtime.loadLibrary0(Runtime.java:749)
          at java.lang.System.loadLibrary(System.java:820)
          at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
          at java.security.AccessController.doPrivileged(Native Method)
          at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
          at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
          at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
          at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
          149)
          at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
          tion(MQBindingsManagedConnectionFactoryJ11.java:139)
          at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
          ion(MQBindingsManagedConnectionFactoryJ11.java:157)
          at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
          a:80)
          at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
          ctionManager.java:150)
          at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
          a:666)
          at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
          at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
          at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
          at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
          at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
          at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
          at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
          at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
          at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
          AQueueConnectionFactory.java:53)
          at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
          QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
          at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
          at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
          at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
          at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
          at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
          a:267)
          at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
          .java:22)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          End server side stack trace
          java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          Start server side stack trace:
          java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
          at java.lang.Runtime.loadLibrary0(Runtime.java:749)
          at java.lang.System.loadLibrary(System.java:820)
          at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
          at java.security.AccessController.doPrivileged(Native Method)
          at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
          at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
          at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
          at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
          149)
          at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
          tion(MQBindingsManagedConnectionFactoryJ11.java:139)
          at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
          ion(MQBindingsManagedConnectionFactoryJ11.java:157)
          at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
          a:80)
          at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
          ctionManager.java:150)
          at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
          a:666)
          at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
          at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
          at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
          at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
          at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
          at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
          at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
          at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
          at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
          AQueueConnectionFactory.java:53)
          at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
          QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
          at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
          at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
          at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
          at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
          at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
          a:267)
          at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
          .java:22)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          End server side stack trace
          <<no stack trace available>>
          --------------- nested within: ------------------
          weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
          [java.rmi.ServerError: A error occurred the server; nested exception is:
                  java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          Start server side stack trace:
          java.rmi.ServerError: A error occurred the server; nested exception is:
                  java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
                  at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
                  at java.lang.Runtime.loadLibrary0(Runtime.java:749)
                  at java.lang.System.loadLibrary(System.java:820)
                  at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
                  at java.security.AccessController.doPrivileged(Native Method)
                  at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
                  at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
                  at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
                  at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
          149)
                  at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
          tion(MQBindingsManagedConnectionFactoryJ11.java:139)
                  at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
          ion(MQBindingsManagedConnectionFactoryJ11.java:157)
                  at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
          a:80)
                  at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
          ctionManager.java:150)
                  at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
          a:666)
                  at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
                  at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
                  at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
                  at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
                  at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
                  at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
                  at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
                  at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
                  at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
          AQueueConnectionFactory.java:53)
                  at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
          QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
                  at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
                  at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
                  at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
                  at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
                  at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
          a:267)
                  at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
          .java:22)
                  at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
                  at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          End server side stack trace
          ; nested exception is:
                  java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          Start server side stack trace:
          java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
                  at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
                  at java.lang.Runtime.loadLibrary0(Runtime.java:749)
                  at java.lang.System.loadLibrary(System.java:820)
                  at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
                  at java.security.AccessController.doPrivileged(Native Method)
                  at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
                  at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
                  at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
                  at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
          149)
                  at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
          tion(MQBindingsManagedConnectionFactoryJ11.java:139)
                  at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
          ion(MQBindingsManagedConnectionFactoryJ11.java:157)
                  at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
          a:80)
                  at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
          ctionManager.java:150)
                  at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
          a:666)
                  at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
                  at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
                  at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
                  at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
                  at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
                  at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
                  at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
                  at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
                  at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
          AQueueConnectionFactory.java:53)
                  at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
          QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
                  at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
                  at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
                  at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
                  at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
                  at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
          a:267)
                  at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
          .java:22)
                  at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
                  at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          End server side stack trace
          at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
          at $Proxy1.bridgeWLS2MQS(Unknown Source)
          at MQClient.main(MQClient.java:54)


The point is that over TCPIP the MQ XA connection factory is not available.
          The MQ shared memory/JNI driver is required to access it, which limits
          access to those processes that are on the same box as the MQ q manager.
          This is an MQ series limitation.
          Douglas WF Acheson wrote:
          > Hello,
          >
          > If memory server me correct, default connection to MQ Series is through
          > JNI calls and shared memory. You have to change the protocol to TCPIP when
          > connection to the queue manager on another box (do not know much about XA
          > with MQ Series); that is when you connect to MQ Series vi JMS on another
          > box you must do something like the following:
          >
          > qcf = new MQQueueConnectionFactory() ;
          > qcf.setHostName(hostName) ;
          > qcf.setPort(port) ;
          > qcf.setTransportType(JMSC.MQJMS_TP_CLIENT_MQ_TCPIP) ;
          > qcf.setQueueManager(qManagerName) ;
          >
          > Then when you create you queues, sesions etc. you are point at the correct Q
          > manager.
          >
          > Hope this helps ...
          >
          > Douglas WF Acheson
          >
          > "Raja Mukherjee" <[email protected]> wrote in message
          > news:[email protected]...
          > > On a closer look at the original post (sorry for missing that, it was
          > early
          > > in the morning), you would not be able to use XA if your QM and WLS are in
          > > different boxes. Check on this newsgroup, there are several posts on this
          > > subject. The whitepaper, if I recall correctly, installs both MQ and WLS
          > on
          > > the sames box. This is a MQSeries limitation not WLS.
          > >
          > > .raja
          > >
          > >
          > > "ibrahim Nehme" <[email protected]> wrote in message
          > > news:[email protected]...
          > > >
          > > > I am trying to setup the example given in the BEA white paper:
          > > > Using MQSeries as a Transactional Resource Manager with Weblogic Server.
          > > > Version 1.
          > > > October 25, 2001.
          > > > I followed the instructions given in the documents, but when i run
          > client
          > > program
          > > >
          > > > >java MQClient t3://localhost:7001 "MQSeries test"
          > > > I received the following exception below. Does anyone how what is the
          > > reason for
          > > >
          > > > this exception(s) and how i can solve the problem? My MQSeries Server
          > and
          > > Weblogic
          > > > 6.1 sp2 are installed on seperate NT machines. I installed the MQSeries
          > > classes
          > > > for java and the MQSeries classes for Java Message Service on the
          > weblogic
          > > > server machine.
          > > > ---------------------------------------
          > > > sending: "MQSEries test"
          > > > Exception in thread "main" java.rmi.ServerError: A error occurred the
          > > server; ne
          > > > sted exception is:
          > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          > > >
          > > > Start server side stack trace:
          > > > java.rmi.ServerError: A error occurred the server; nested exception is:
          > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          > > > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
          > > > at java.lang.Runtime.loadLibrary0(Runtime.java:749)
          > > > at java.lang.System.loadLibrary(System.java:820)
          > > > at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
          > > > at java.security.AccessController.doPrivileged(Native Method)
          > > > at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
          > > > at
          > > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
          > > > at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
          > > > at
          > > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
          > > > 149)
          > > > at
          > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
          > > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
          > > > at
          > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
          > > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
          > > > at
          > > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
          > > > a:80)
          > > > at
          > > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
          > > > ctionManager.java:150)
          > > > at
          > > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
          > > > a:666)
          > > > at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
          > > > at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
          > > > at
          > com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
          > > > at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
          > > > at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
          > > > at
          > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
          > > > at
          > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
          > > > at
          > > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
          > > > )
          > > > at
          > > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
          > > > AQueueConnectionFactory.java:53)
          > > > at
          > > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
          > > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
          > > > at
          > > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
          > > > at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
          > > > at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
          > > > at
          > > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
          > > > at
          > > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
          > > > a:267)
          > > > at
          > > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
          > > > java:22)
          > > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          > > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          > > > End server side stack trace
          > > > ; nested exception is:
          > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          > > >
          > > > Start server side stack trace:
          > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          > > > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
          > > > at java.lang.Runtime.loadLibrary0(Runtime.java:749)
          > > > at java.lang.System.loadLibrary(System.java:820)
          > > > at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
          > > > at java.security.AccessController.doPrivileged(Native Method)
          > > > at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
          > > > at
          > > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
          > > > at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
          > > > at
          > > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
          > > > 149)
          > > > at
          > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
          > > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
          > > > at
          > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
          > > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
          > > > at
          > > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
          > > > a:80)
          > > > at
          > > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
          > > > ctionManager.java:150)
          > > > at
          > > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
          > > > a:666)
          > > > at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
          > > > at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
          > > > at
          > com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
          > > > at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
          > > > at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
          > > > at
          > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
          > > > at
          > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
          > > > at
          > > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
          > > > )
          > > > at
          > > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
          > > > AQueueConnectionFactory.java:53)
          > > > at
          > > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
          > > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
          > > > at
          > > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
          > > > at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
          > > > at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
          > > > at
          > > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
          > > > at
          > > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
          > > > a:267)
          > > > at
          > > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
          > > > java:22)
          > > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          > > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          > > > End server side stack trace
          > > >
          > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          > > >
          > > > Start server side stack trace:
          > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          > > > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
          > > > at java.lang.Runtime.loadLibrary0(Runtime.java:749)
          > > > at java.lang.System.loadLibrary(System.java:820)
          > > > at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
          > > > at java.security.AccessController.doPrivileged(Native Method)
          > > > at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
          > > > at
          > > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
          > > > at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
          > > > at
          > > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
          > > > 149)
          > > > at
          > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
          > > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
          > > > at
          > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
          > > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
          > > > at
          > > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
          > > > a:80)
          > > > at
          > > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
          > > > ctionManager.java:150)
          > > > at
          > > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
          > > > a:666)
          > > > at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
          > > > at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
          > > > at
          > com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
          > > > at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
          > > > at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
          > > > at
          > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
          > > > at
          > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
          > > > at
          > > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
          > > > )
          > > > at
          > > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
          > > > AQueueConnectionFactory.java:53)
          > > > at
          > > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
          > > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
          > > > at
          > > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
          > > > at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
          > > > at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
          > > > at
          > > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
          > > > at
          > > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
          > > > a:267)
          > > > at
          > > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
          > > > java:22)
          > > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          > > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          > > > End server side stack trace
          > > >
          > > > <<no stack trace available>>
          > > > --------------- nested within: ------------------
          > > > weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
          > > > [java.rmi.ServerError: A error occurred the server; nested exception is:
          > > >         java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          > > >
          > > > Start server side stack trace:
          > > > java.rmi.ServerError: A error occurred the server; nested exception is:
          > > >         java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          > > >         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
          > > >         at java.lang.Runtime.loadLibrary0(Runtime.java:749)
          > > >         at java.lang.System.loadLibrary(System.java:820)
          > > >         at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
          > > >         at java.security.AccessController.doPrivileged(Native Method)
          > > >         at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
          > > >         at
          > > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
          > > >         at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
          > > >         at
          > > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
          > > > 149)
          > > >         at
          > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
          > > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
          > > >         at
          > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
          > > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
          > > >         at
          > > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
          > > > a:80)
          > > >         at
          > > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
          > > > ctionManager.java:150)
          > > >         at
          > > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
          > > > a:666)
          > > >         at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
          > > >         at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
          > > >         at
          > com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
          > > >         at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
          > > >         at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
          > > >         at
          > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
          > > >         at
          > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
          > > >         at
          > > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
          > > > )
          > > >         at
          > > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
          > > > AQueueConnectionFactory.java:53)
          > > >         at
          > > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
          > > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
          > > >         at
          > > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
          > > >         at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
          > > >         at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
          > > >         at
          > > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
          > > >         at
          > > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
          > > > a:267)
          > > >         at
          > > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
          > > > java:22)
          > > >         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          > > >         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          > > > End server side stack trace
          > > > ; nested exception is:
          > > >         java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          > > >
          > > > Start server side stack trace:
          > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
          > > >         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
          > > >         at java.lang.Runtime.loadLibrary0(Runtime.java:749)
          > > >         at java.lang.System.loadLibrary(System.java:820)
          > > >         at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
          > > >         at java.security.AccessController.doPrivileged(Native Method)
          > > >         at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
          > > >         at
          > > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
          > > >         at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
          > > >         at
          > > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
          > > > 149)
          > > >         at
          > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
          > > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
          > > >         at
          > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
          > > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
          > > >         at
          > > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
          > > > a:80)
          > > >         at
          > > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
          > > > ctionManager.java:150)
          > > >         at
          > > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
          > > > a:666)
          > > >         at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
          > > >         at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
          > > >         at
          > com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
          > > >         at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
          > > >         at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
          > > >         at
          > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
          > > >         at
          > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
          > > >         at
          > > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
          > > > )
          > > >         at
          > > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
          > > > AQueueConnectionFactory.java:53)
          > > >         at
          > > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
          > > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
          > > >         at
          > > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
          > > >         at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
          > > >         at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
          > > >         at
          > > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
          > > >         at
          > > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
          > > > a:267)
          > > >         at
          > > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
          > > > java:22)
          > > >         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          > > >         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          > > > End server side stack trace
          > > > ]
          > > > at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
          > > > at $Proxy1.bridgeWLS2MQS(Unknown Source)
          > > > at MQClient.main(MQClient.java:54)
          > >
          > >

Problems with integrating YUI Layout Manager with APEX

Hello,
I have a problem about the YUI Layout Manager and APEX.
This is the link to the Layout Manager, which I want to integrate:
http://developer.yahoo.com/yui/layout/
I tried to integrate it and in Firefox everything is fine!
But with Internet Explorer the page is damaged.
Look at the sample on apex.oracle.com:
http://apex.oracle.com/pls/otn/f?p=53179:1
Can anybody help me with this issue?
I think this couldn`t be a big problem, becaus in FF it works correctly, but I don`t get the point to run that in IE7.
Thank you,
Tim

Hello,
now I put some color in it, but it does not help me pointing out the problem.
The Login for my Account is:
My Workspace is: EHRIC02
Username: [email protected]
Password: ehric02
Is there anybody who have implementet the YUI Layout Manager with APEX? Perhaps that isn`t possible with APEX?
I know that John Scott played with YUI a few times, has he tried out the Layout Manager?
Thank you,
Tim

How to associate an XA Resource Manager with a Corba Native Client?

Hello,
how is a Corba Native (C++) Client associated with an XA Resource Manager? I can't find it in the documentation.
I believe I understand how it works in a Tuxedo native client: buildclient needs "-r <rmname>" and tpinit() needs to include the group name (ubbconfig group with TMS_ORA and OPENINFO).
buildobjclient does not seem have anything like the "-r" option, and the bootstrap object does not seem to have any way to specify a group.
We have a Corba client that updates the database, enqueues into /Q and invokes a transactional Corba service. All three need to be in the same transaction. I am stuck on how to get an XA DB connection.
Thanks...
Roger
PS: The proper solution is to make the client's functionality a service and have the client invoke the service. But that causes other complications.

I got part of the answer from a different thread.
Native clients do not need a TMS_* to start a transaction. On commit/rollback they consult the Global Transaction Table (GTT) to find a TMS_* that is involved in the transaction and delegate the commit/rollback to one of those TMS_*.
For remote clients (using IIOP) the ISH handles the request from the remote client and deals with transaction management.
Roger

Webservices with APEX and base64binary

Hi,
I'm trying to integrate stellent content management with APEX 3.2. for this I need to create and consume webservices. Stellent has some basic WSDL's that I can use to integrate. One of them is called checkin service and under checkin service we have a sub service called checkinuniversal that I am using to check in content into the content server. the issue that I am facing is that I dont know how to pass base64binary data to the webservice as the filecontent in that WSDL has a format of base64binary. I can manually create the webservice request and post the data to the webservice but that will not be the optimal way. So long story short is there any way to post base64binary data to a WSDL based webservice in APEX?
Regards,
Anand

Anand:
No, you cannot yet post binary base64 encoded data with a Web service reference based on a WSDL. You will have to use PL/SQL. I have written a blog post on how to do exactly what you are trying to accomplish. See:
http://jastraub.blogspot.com/2008/06/flexible-web-service-api.html
Regards,
Jason

CRM 7 Marketing Resource Management and BI

Hello Gurus,
we want to use the scenario for marketing resource management with integrated BI.
Unfortunately in customizing and SAP Help only the connection to SAP BI BPS is described.
As far as I know BPS is an old tool. What about the use of BI-IP or BPC?
If you any information on that, I would be happy if you share it with me.
Thanks a lot and kind regards
Hannes

Yes, Marketing resource management (MRM) is about managing all the resources required in marketing - money/budgets, time and resources (people, assets, etc.) and improving efficiency.
Defined by analysts as "a set of processes and capabilities that aim to enhance a company's ability to coordinate and optimize the use of internal and external marketing resources. MRM applications facilitate planning and budgeting, they coordinate execution and measure the impact of marketing efforts."
So, it goes beyond scenario planning and also includes budgeting, digital asset management, workflows, etc.
Refer to this link for documentation:
[http://help.sap.com/saphelp_crm70/helpdata/en/e0/4017b12a414e50bde6eb17b4b1233e/frameset.htm|http://help.sap.com/saphelp_crm70/helpdata/en/e0/4017b12a414e50bde6eb17b4b1233e/frameset.htm]
Let me know if you need any additional information.
Anik

VXI Resource manager problem

I have the following configuration:
VXI-PCI system (National Instrument 777119-32 VXI-PCI 8015 interface kit +
National Instrument 777178-01 mainframe extender.)
One PC.
Two VXI cages.
In the first VXI cage at slot 0, I installed NI zero slot controller,
configured to logical address 1.
In the second VXI cage at slot 0, I installed NI zero slot controller,
configured to logical address 2.
The VXI cages are chained using MXI-2/M3 cable.
In the first VXI cage at slot 1, I installed a RACAL Instrument (1260-35
with option OPT-01T) that also needs a logical address, configured to
logical address 3.
In the second VXI cage at slot 1, I installed a RACAL Instrument device
(1260-45 with option OPT-01T) that also needs a logical addre
ss, configured
to logical address 4.
Running the Resource manager with only one RACAL device in either cage -
result OK (logical addresses 1,2,3 or 1,2,4).
Running a full system result - FAIL with the message "The device at logical
address 3 did not respond to the read protocols command.
The same problem appears if I configure the logical address of the OPT-01T
to 255 (auto assign logical address).
Please advice.
Thanks
Eli Nachumzon
ATE Development
Engineering Dept.
ADC teledata
Tel: +972-9-9591453
Fax: +972-9-9591805
E-mail: [email protected]

Eli-
I just noticed this unanswered question. I am guessing you've gotten your answer from another source by now, but in case anyone else has similar issues, I recommend our Logical Address Wizard, which helps configure multi-chassis MXI systems. Your case illustrates a common mistake when assigning LA's; having your two VXI-MXI-2's at LA 1 and 2 will not work. According to the LA Wizard, a combination like LA 4 (containing an instrument at LA 5) and LA 6 (containing an instrument at LA 7) would work.
-Scot

File Server Resource Manager will not load WMI Objects on Windows 8.0/8.1 Preview with Hyper-V and Server Tools Loaded

Hi Folks,
I have a problem getting "File Server Resource Manager" to start properly because WMI objects are not loading??? I don't understand this at all because I am able to access them with other Apps, etc. I have been over my Services list as well but
have not yet discovered which Service turns on/off "File Server Resource Manager". I have looked in Windows\System32\ and I can not find SrmSvc. I found other Srm's there though. I also found the FSRM Snapin which generates the Figure below but I
can not find it in the WMI Browser. I believe the Firewall is OKAY since I have been over that thoroughly. I do have the Server Tools Installed for Windows 8.0 or Windows 8.1 Clients as well as the Windows Updates applied, which is where I got "File Server
Resource Manager" in the first place. I have had WMI and Powershell 3.0 Package, installed since Windows 7 but I run a repair on them anyway.
I have read through "File Server Resource Manager could not load WMI objects on Windows Server 2012
Article ID: 2831687" but since I don't seem to have SrmSvc the solution doesn't help me. I haven't been able to find a similar one for the Windows Client.
If there is anything you could share on this problem I would be much obliged.
Thanks again,
Crysta
PhotM Phantom of the Mobile

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

What are the steps for a NEWBIE with no experience in SAP, to become a SAP professional (Energy & Env. Resource Management) ?

I am a QA & ISO Compliance professional with no knowledge and experience in SAP, but i am looking forward to become a SAP professional. Based on my experience with ISO 14001 (Environment Management) & ISO 50001 (Energy Management) i am interested in ENERGY & ENVIRONMENTAL RESOURCES MANAGEMENT option, but i am not curious to know about the path towards the mentioned goal. I also have a degree in mechanical engineering. I have following questions:
Is an IT background or knowledge of programming a pre-requisite ?
What module would "ENERGY & ENVIRONMENTAL RESOURCES MANAGEMENT" be under ?
Before going in for training and certification, what i should study or be prepare with ?
Is the road-map (Below) all i have to follow ?
https://training.sap.com/ca/en/curriculum/ehs_compliance-sap-ehs-management--environmental-compliance-g-en
Any help and information will be immensely appreciated !

have you checked personnel profile? with CONFIGPROFILE = EDIT? http://help.sap.com/erp_hcm_ias_2012_01/helpdata/en/92/b073fb42b347af9cb19299881b379d/content.htm http://help.sap.com/erp2005_ehp_05/helpdata/en/48/164bbbb68a4b37b62ad9777b9b449f/content.htm?frameset=/en/48/164bbbb68a4b37b62ad9777b9b449f/frameset.htm&current_toc=/en/4f/b9088db1034075a337c537083539da/plain.htm&node_id=141 No you cant make changes unless you have a WF step in your processes and forms which allows you to make changes during the cycle of approval Once completed, you can only reinitiate and it ll trigger WF etc. ie HR admin step, where they check all the information is there in the form and then only allows it to be updated to the Infotype and complete the process. did you check scase with the required roles as indicated above? run su53 for missing any authorization?

RH8 hangs with 100% CPU when closing a topic. Resource Manager to blame?

Please refer to the following thread for background information: http://forums.adobe.com/thread/734972?tstart=0
I'm re-listing this issue, as it has rasied its ugly head again, and I've no resolution this time.
Summary:
The original issue was that RH8 would hang whenever I closed a topic for anywhere between 15-30 seconds before allowing me to interact with the application again. Attempting to interact with the GUI during this freeze would result in the 'Not Responding' message at the upper-left of the application window (suffice it to say I'm on a PC with Windows).
After much investigation it was suggested to me that my profile may be corrupt, and in order to test this, another user should log on and see whether they experienced the same problem. As it is, they did not. So I had my Systems Admin recreate my domain profile, and everything worked just fine.
...until now.
Last week we all upgraded from Windows XP to Windows 7 (32 bit). We also changed our anti-virus software. The awful hanging issue in RH has returned.
We've attempted the solution from last time, by recreating my profile on the domain, to no avail. We have in fact gone to the extent of reformatting the hard drive and reinstalling Windows, the anti-virus software and RH8 (plus all available patches) from scratch. In case anyone is wondering, we've tried running RH without the antivirus installed, and when installed have also tried excluding the RH application folder and all my project folders, just in case it was the anti-virus software at fault. Regardless, the RH problem exists.
I can't understand why I'm now having this problem. Truth be told, I never really understood why recreating my domain profile in the first place resolved the problem last time.
However, I have now discovered something else...
In my RH Resource Manager I have a few thousand images in the Image folder. Not much I can do about this - the applications I write Help for have many screens users can access, and I write the Help for half a dozen applications. When I delete the contents of the images folder within the Resources Manager, RH works perfectly - no hanging whatsoever. As soon as I import the images into this folder again, the hanging is back. I have tested this a few times now, and have rebooted and had another user log on to confirm, and it happens every time. I'm dumbfounded of course, particularly because the same set of images has been sitting in the Resource Manager for months (since my original post about this issue, last year), and RH has been working perfectly.
I've also tried Peter Grainge's suggestion to create an empty BaseCSS_res.dll file (http://www.grainge.org/pages/authoring/rh8/using_rh8.htm), but as I've installed all the RH8 updates, this shouldn't be an issue.
I've also tried deleting the CPD file without success.
Thanks in advance.

It seems this has been resolved!
Many thanks for all the suggestions. Peter ultimately forwarded the solution - something that he'd sourced from a rep at Adobe, as follows:
Every file/folder change in the root folder of RH8 Resource Manager triggers a rescan of all the sub-folder/files. That is why in case of thousand image it will take time. Like xxxx said we may ask user for root folder, it should not be project folder or frequently changing folder.
Probably he is using the default path given in the root folder and RoboHelp changes a temporary css file in that folder very frequently, in fact with every topic close.
That is causing the slowness and it should be easy to reproduce in the default scenario. This is RH8 only issue.
So, to fix my issue:
Open the Resource Manager Pod.
Click the Add/Edit Categories icon. The Add/Edit Categories window appears.
Within this window, change the 'Root Folder' path to something other than the default. In my case, I create a new folder on my root hard drive, outside of the Robohelp folder, just to be sure.
So far this is working perfectly - no 'hanging'. I'll keep an eye on it.
I love the comment "This is RH8 only issue."
Oh?! Is it? Was it fixed in a patch, Adobe? Please don't tell me that it was fixed in RH9, because there's no way known I should have to pay for an upgrade to resolve something that certainly looks like a bug. As happy and grateful I am to have this resolved, it has cost me a week's work.

Oracle Resource Manager function with SAP BI7

Hi,
Have anyone considered or using Oracle Database Resource Manager (Oracle 10.2) feature for SAP BI application in your site? I dont see a single OSS hit on this feature.
We have a SAP BI system that has few power users (who can run large STAR_TRANSFORMATION queries that analyzes large volume of data) and the main user community (our sales force > 3000+ users) who can run smaller queries of such nature or queries of different types.
We want to see if there is any way we can control the resource utilization on the database server.
Thanks in advance,
Raj

> Of course, this would require an additional specifications such as SERVICE in the TNS and Listener files.
Yes - but I'm not sure if that would give the necessary effect. Once the statement reaches the database kernel engine, it gets processed, no matter if you limit the TNS/listener usage because TNS is no more involved when the statement reaches the OLAP engine.
> In the BI environment, I'm thinking you need this db feature to control database resources when loads and reports overlaps or even several small and large queries run concurrently despite however many app server a system has, all these come to the database.
I think SAPs answer is: Buy a bigger box (or use RAC to distribute the load)
> The big question is whether SAP would support such a setup.
The feature is not listed explicitly in note 105047 - Support for Oracle functions in the SAP environment. I'd make a call at BC-DB-ORA and ask what they think about that.
I understand your problem very well but I doubt, that there's an easy way of accomplishing this with standard tools.
Markus

How Transaction Manager work with Resource Manager, like Connection pool?

hi,
I'm using BEA Webloigc8.1 Stateless Session Bean/DAO/Oracle stored proc.
but I'm not quite clear how Transaction Manager work with Resource Manager, like Connection pool.
my understanding is that, in a weblogic transaction, a stateless session bean interact with several DAOs, and for each method of DAO a connection is acquired from connection pool. I've heard that the connection will not return to pool until the transaction commits.
My question is that, does it mean that for a weblogic transaction, multiple connections might be allocated to it? and if multiple connections are allocated, then how many oracle transactions would be started? or multiple connections share the same oracle transaction?
I didn't feel it make sense to start multiple oracle transactions, cause deadlock might be incurred in a single weblogic transaction.
any help appreciated!

Xin Zhuang wrote:
hi,
I'm using BEA Webloigc8.1 Stateless Session Bean/DAO/Oracle stored proc.
but I'm not quite clear how Transaction Manager work with Resource Manager, like Connection pool.
my understanding is that, in a weblogic transaction, a stateless session bean interact with several DAOs, and for each method of DAO a connection is acquired from connection pool. I've heard that the connection will not return to pool until the transaction commits.
My question is that, does it mean that for a weblogic transaction, multiple connections might be allocated to it? and if multiple connections are allocated, then how many oracle transactions would be started? or multiple connections share the same oracle transaction?
I didn't feel it make sense to start multiple oracle transactions, cause deadlock might be incurred in a single weblogic transaction.
any help appreciated!Hi. If you configure your WLS DataSource to use keep a connection for
the duration of a tx, it will do that, and in any case there can be
no deadlock however many connections operate for a given XA transaction.
Here is the best coding form for DAOs or any other user-written code
for using WebLogic DataSources. This is important for two reasons:
1 - Thread-safety is maintained as long as the connection is a
method-level object.
2 - It is crucial to notify WebLogic that you are done with a connection
ASAP, by your calling close() on it. We will then put it back in the
pool, or keep it under the covers for your next request if it's in a
transaction etc. The pool is optimized for quick get-use-close scenarios.
public void one_of_my_main_JDBC_Methods()
Connection con=null; // Must be a method level object for thread-safety
// It will be closed by the end of the method.
try {
con = myDataSource.getConnection(); // Get the connection in the try
// block, directly from the WebLogic
// datasource
// do all the JDBC within this try block. You can pass the
// connection to subordinate methods, but not to anywhere
// that thinks it can use the connection later.
rs.close(); // close any result set asap
stmt.close(); // then close any statement asap
// When you're done with JDBC
con.close(); // close the connection asap
con = null; // nullify it so the finally knows it's done
catch (Exception e) {
// do whatever catch stuff you want. You don't
// need a catch block if you don't want one...
finally {
// It is important to close a JDBC connection ASAP when it's not needed.
// without fail, and regardless of exit path. Do everything in your
// finally block in it's own try-catch-ignore so everything is done.
try { if (con != null) con.close();} catch (Exception ignore){}
return ret;
}

How to use quota on a desktop folder for all users with File Server Resource Manager.

Hi there,
I'd like to know if there is a posibility to use variables in the path with File Server Resource Manager if you want to set the quota.
The path I'd like to use is d:\home\%username%\desktop.
Like to hear from you all if there is a solution or workaround for this one :)
Thanks for your time.
Ben.
Ben van der Meer

That's a question about Automator, so I'd pop that one here
http://discussions.apple.com/forum.jspa?forumID=1339
Regards
TD

How to configure ex90 for use with polycom resource manager GAB

My customer has a Polycom infrastructure, including using Resource Manager for the GAB server. I also have several Cisco endpoints deployed (EX90 and C40) and I need to get these units configured to use the GAB. Polycom documentation sucks and only says:
1. At the endpoint, enter the information required for directory set up including the Polycom Global Address Book/RealPresence Resource Manager system IP address and the path.
For example, http://<RPRM_IP_ADDRESS>/TMS/Public/external/phonebook/PhoneBookService.asmx.
To do this on Cisco endpoints, go to System Configuration> Phone Book Server.
2. Wait for the connections to take effect
When I go to the EX90 phone book server setup page, I only have ID, Type and URL fields. The type field has a drop down that only has Cisco options available (VCS, TMS, Callway and CUCM)
No matter what combination I use, I haven't been able to get the EX90 to pickup the Polycom directory.
Any suggestions? Thanks

What happens when you try that URL (http://<RPRM_IP_ADDRESS>/TMS/Public/external/phonebook/PhoneBookService.asmx) from a Web Browser - do you see anything, or get an error?
You'll need to make sure that's accessible first before trying to configure your endpoints to use it.

Please Help with Database Resource Manager 10g

I want to implement Database Resource Manager 10g on HP-UX server.
But, before to implement, I want to test the functionnality and the stability.
Does anyone have a "test case" or any comment about DRM 10g?
Thanks
Robin

A bit more info: Here is the connection script as its defined in Dreamweaver: <?php
# FileName="Connection_php_mysql.htm"
# Type="MYSQL"
# HTTP="true"
$hostname_karen_product = "localhost";
$database_karen_product = "karen";
$username_karen_product = "root";
$password_karen_product = "root";
$karen_product = mysql_pconnect($hostname_karen_product, $username_karen_product, $password_karen_product) or trigger_error(mysql_error(),E_USER_ERROR);
?>
Where is says mysql_pconnect, I changed the $hostname_karen_product etc to 'localhost', 'username', 'the password for the database')
Do i need to do something different at $database_karen_product?
I'm basically new at this and confused as to how to alter this connection script.
Thanks
Derek

Resource Management with Apex

Similar Messages

Maybe you are looking for