Resource plan not migrating to all targeted cluster members

Hi,
We got an environment setup like:
Physical machine 1: AdminServer, OSB1, WLS1
Physical machine 2: OSB2, WLS2
Where we have put OSB[1,2] into a cluster and WLS[1,2] into a cluster. The servers are running WLS 10.3.3.4.
The problem is that: When creating a new connectionFactory for the DBAdapter, the plan.xml is only updated on 1 machine (not both of them). In my setup, it is always physical machine 1 that gets the updated plan.xml
I looked at the target for the deployment, and it is set for AdminServer and OSBCluster (meaning, OSB1 and OSB2). And when going into the "Monitoring -> Outbound Connection Pools", I can also see that only the AdminServer and OSB1 has an outbound connection pool.
To fix this, I've had to use SCP from OSB1 -> OSB2 for the plan.xml and then doing a redeploy of the DBAdapter. Then, I see an outbound connection from OSB2.
Have I miss understood something? Shouldn't the configurations (plan.xml) be replicated across all targeted members, in case one servers fails?
Best Regards,
Mathias

hello,
          and what about ServerAffinity (to be set on the ConnectionFactory-level)? Should be "false". Antoher explanation is that your cluster is out of sync (check, if multicast has been set correctly).
          load balancing and server affinity for dd
          regards,
          makiey

Similar Messages

Database Resource Plan not working...

DbVersion: 10.2.0.4
For some reason my resource plan is not taking effect. I've created 4 resource consumer groups. I've created a plan utilizing these consumer groups. The plan is enabled and is the top plan. The resource_manager_plan parameter is set to: FORCE:MYPLAN and I've also tried setting it to "MYPLAN" only.
The Consumer Group mappings have been set at the service level. So depending on the database service you're connecting via you should be using a particular consumer_group.
The problem is that everyone that connects regardless of what service they are using is routed to use the "OTHER_GROUPS" group (except for the sys and system users).
I find this information with the following query:"
SELECT USERNAME,SERVICE_NAME,RESOURCE_CONSUMER_GROUP FROM GV$SESSION;
What am I missing? Do I need to bounce the database or something in order for a resource plan to take effect?

user600345 wrote:
Do I need to bounce the database or something in order for a resource plan to take effect?Not sure if restart of database will help.
Some Documentation maybe helpful
[Resource Part 1 | http://www.databasejournal.com/features/oracle/article.php/3296961/Oracle-Database-Resource-Manager-Part-1Overview.htm]
[Resource Part 2 | http://www.databasejournal.com/features/oracle/article.php/3309981/Oracle-Database-Resource-Manager-Part-2-Resource-Plan-Management.htm]
SS
SS

IPlanet Plug-in does not recognize all cluster members

          We are running 7 WLS 6.1 SP2 server instances on two Solaris 2.8 machines. (3 on
          machine A , 4 on machine B). The admin server is also running on Machine A.
          All the cluster members appear to join the cluster correctly on startup, at least
          as far as the WLS console shows. No logged errors.
          We are using the IPlanet 6.0, sp4 with the Weblogic NSAPI plug-in to load-balance
          across the cluster.
          However the Plug-in will only recognize the server instances on machine A or machine
          B during any one life of the IPlanet. We can never get the plug-in to recognize
          all instances at one time, only on one machine or the other. We can see this from
          the results of a __WebLogicBridgeConfig.
          Using same configuration WLS configuration, run where machine A and B are domains
          on the same physical machine uses both A and B servers.
          We suspect this has to do with a multicast problem, running MulticastTest between
          machines A and B fail to receive messages.
          My questions are,
          A) Why would we be seeing all server instances as having successfully joined the
          cluster, if multicast is failing?
          B) How would multicast have any effect on how the NSAPI plug-in sees the cluster
          members?
          C) Why would the cluster instances seen by the NSAPI plug-in alternate between
          machine only A or B, after each shutdown and start-up ?
          WLS 6.1 SP2 on Solaris 2.8, IPlanet 6.0 sp4.


I am seeing a similar problem. I have three machines - each with four managed servers running on them. All 12 servers in the cluster are are specified in the obj.conf for NSAPI. Only eight of the servers get used, however. The wierd part is that machine1 contains managed servers 1, 4, 7, and 10. Machine 2 contains managed servers 2, 5, 8, and 11. Machine 3 contains managed servers 3, 6, 9, and 12. In the obj.conf, we list the machines in ourder 1 to 12 for the cluster. For some reason the NSAPI is skipping managed servers 3, 6, 9, and 12. I have checked both the connectivity for the ip and the port. The fire wall seems fine.
          Did you ever get a response or figure out what was causing this problem.
          Thanks,
          Mark

Oracle EPM Planning 11.1.2.1 - Ziplogs utility not working on all servers

Oracle EPM Planning 11.1.2.1 - Ziplogs utility not working on all servers
We have Planning 11.1.2.1 distributed so that Planning web app, EAS etc. are on own webservers and Essbase is on separate cluster.
Currently we have an issue with ziplogs utility - it seems to work on Essbase servers gathering all necessary ODL logs for over 100MBs, but on Planning Webservers ziplogs utility seems to start, but generates only empty 1kb zip file without any content.
We haven't touched logging otherwise, everything should be pretty much in original state.
Unfortunately I can't remember now exactly, but I have a a hunch that ziplogs utility worked prior patching Planning element on webservers to 11.1.2.1.600.
Other servers or elements haven't been patched (although Oracle recommends also FS, EB etc. to be patched to 11.1.2.1.600). I'm wondering, could this be the reason as in a way FS and EB are on same patching level whereas Planning is not?
Also, there seems to be a bit of limited diskspace on webservers (still waiting for extension), but I would imagine lack of diskspace for preparing any temp files etc. would results in some errors, the problem is that ziplogs doesn't give any errors, just runs very short time and then ends bringing 1kb empty file.
Has anyone experienced anything similar and are you perhaps able to give quick guidance how to enhance or modify ziplogs batch file etc. to make it create a bit of logging of its own actions?
Thanks in advance if anyone has ideas what could be the root cause for this or faced something similar.

Okay, I was able to get it installed and Common Components installed correctly this time. I still can't access workspace though.
Is there something I need to do before I can browse to http://localhost:19000/workspace/index.jsp?
All I get is the following error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Anyone know what's going on?

The source or target cluster ID is not present on the system!

Hi,
During System copy, we are facing issue "Run Java Migration Tool kit"
Phase of Sapinst.
I could found exact error messages sequences which may help you in
understanding the problem.:
==========================================
#Start preparing switch.
#The switch.properties could not be read. Reason: switch.properties (No
such file or directory)
The source or target cluster ID is not present on the system! The
current (source) cluster ID is 787075 and the new (target) cluster ID
is 3137675
==========================
Last error message might be quite familiar to you as this is very
common error message however just wanted to inform you that the "SAP
Note 966752 - Java system copy problems with the Java Migration
Toolkit" could not help me out.
all the possible entries have been updated and retried but no success.
Please suggest if you have face similar kind of problem.
Thanks.
Cheers !!!
Ashish

Hi,
cluster ID is just combination of below parameters:
In our case, my source system (ABC) was refreshed from another system (XYZ) recently
so while installing target system ( DEF), I changed the source system details from ABC to XYZ in below file and retried the
SAPinst screen. System copy has got completed successfully.
Open the file <installation directory>/jmt/cluster_id_switch.properties and edit the line
src.ci.sid=
src.ci.instance.number=
src.ci.instance.name=
src.ci.host=
If in your case source system is not refreshed recently; You may try with functional host name or OS host name etc. details for above parameters.
If this does not work check details of "SAP Note 966752 - Java system copy problems with the Java
Migration Toolkit" which says almost the same thing but I could not get that as the statements related to
box number are bit confusing and contradictory.
Cheers !!!
Ashish

Resources not getting displayed in Resource Planning iView

Hi,
We are working in CRM 5.0. We have assigned the iview for Resource Planning for a Portal Role. The iView is also opening correctly.
The Problem is that when we give a Particular Service Org Unit (Technicians Group) in Advanced Search, none of the Resources are getting displayed in the Gantt Chart and also no service order items are getting displayed.
The same thing is working fine in GUI. All related WFM settings and resource creation report have been done.
Please help.
Regards,
J.Prabananth

Hi Prabananth,
I am also trying to access Resource Planning iView from CRM through EP
Workforce Management> Resource Planning
While accessing the iView I am getting the following error
The Application WFDS_RPA is Invalid.
I have checked on the SICF transaction for the following BSP application
WFDS_RPA.
But I could not found one on the list.
I have also checked the CRM BSP Application List. But It is not available there.
tHAT'S WHY i AM GETTING THE ERROR.
How can I check and get this BSP application ?
Need ur help.
Thanks and warm regards
Purnendu

"You will not be able to publish your resource plan..."

Hi all,
Project Server 2010 with SP1 and Feb '12 CU.
We've started experimenting with resource planning and have found a situation for which I have no explanation. For some projects, the resource plan functions work just fine. But we have a few where the Publish option in the ribbon of the resource
plan is greyed-out and a message stating "Your will not be able to publish your resource plan until you publish the corresponding project schedule". I've found that by following the instructions and publishing the project in PWA works - the publish capability
for the resource plan is no longer greyed-out.
HOWEVER, I don't know what's causing this situation in the first place. New projects can be created and they don't seem to produce the greyed-out publish option. Most existing projects won't behave this way either - but some do. It doesn't
appear to be a permissions issue since when the publish button is greyed-out it remains that way for project managers and admin alike. Also, publishing the project from Project Professional doesn't work either, only publishing from PWA will do the trick.
Any advice about how to avoid getting the greyed-out publish button for resource plans would be most appreciated.

Thanks Michael!
As it turns out, this isn't quite the answer but you've definitely helped in figuring this out. Based on some additional experimentation (triggered by your line of thinking!), it seems that a change to the project's task and/or resources will disable
the publish capability for that project's resource plan - unti the project is published again in PWA. So if you add a task, or resource, or change an assignment that will trigger this greyed-out behavior for the publish button in the ribbon of the resource
plan.
Also, I've found that publishing in project professional has no impact. The only way to re-enable the publish capability for the resource plan is to publish the project in PWA. Of course, the message that accompanies the greyed-out publish button
states this explicitly but people like me (who lack a keen sense for the obvious) sometimes miss these subtleties.
Thanks again for your response - quite helpful.

Cluster resource does not start automatically

Hello,
I have a strange issue. last saterday i replaced the motherboards of three HP DL380G6 servers, there is an HW issue with the production date of this hardware.
After change of the HW, the cluster resources does not start automatically, when booting the servers. The resources come in state 'offline'(except the master IP resource). When start manually, the cluster resources works fine. I checked the eDirectory , and changed also the startup parameter of the cluster (autostart-manually-autostart) but with no results.
When i create a new (simple) CL-resource, i have the same issue with this resource. Only the master ip CL-resource starts automatically??
Does anyone have an answer for this problem....
Thanks in advanced
3-node SLES9sp3 SLES/OES1 cluster (i know its old...)
- iSCSI connection to an SLES11-SAN

Originally Posted by changju
The state is stored in eDir, so your problem is most likely caused by an eDir issue.
Please check the attribute "NCS:CRM Failover Mode" of the resource object in eDir. If its value is an odd number, it means the resource will load automatically. If it's not, add 1 to the number and save the new value.
Then, you need to check file "/var/opt/novell/ncs/resources.xml". Find the section for the resource, and check "nCSCRMFailoverMode" to make sure it matches what you have in eDir. If not, please run command "/opt/novell/ncs/bin/ncs-configd.py -init" to try to update it.
If the problem persists after all the above, please contact NTS. We will have it resolved.
Best regards,
Changju

ICE Online not migrating all the KM contents

Hi All,
We are using ICE Online to migrate the KM Contents.
In the Source repository, there are 5 folders(say - A,B,C,D,E). We created separate components for these folders in the Offer.
After the ICE Online Transport, only the folders A,B and C are migrated to the Target System. The folder D & E are not migrated.
Can anyone tell me the reason for this?
Regards,
Adren

May the repository properties are differnt in source and target system.
First transport the reposiotories from system admin->systemconfig->KM->CM ......
Then do the ICE Online transport.
Give a try .. good luck
Raghu

The cluster resource could not be brought online by the resource monitor.

I'm installing Exchange 2007 CCR at a set of Windows server 2008 Virtual Machines.
When I refer the doc to Configure the Node and File Share Majority Quorum, at the step 3 -
Bring the new File Share Witness resource online by running the following command:
Cluster.exe res "File Share Witness (UNCPath)" /online
I got the following error:
System error 5018 has occurred (0x0000139a).
The cluster resource could not be brought online by the resource monitor.
How could I successfully Configure the Node and File Share Majority Quorum?

Your link brings me back to this thread. Not sure why, as I was able to find the article you reference with this link:
http://technet.microsoft.com/en-us/library/bb676490(v=EXCHG.80).aspx
To ensure this works, you need to make sure the Exchange Servers group is in the Administrators group on the server hosting your FSW.
FYI, Microsoft suggests that the FSW be hosted on a hub server. This simplifies management, since the Exchange administrators will already be able to manage the server the FSW is hosted on, and all permissions are already in place for the messaging
system.

All targets status on home page is not working

The all targets status on the home page shows Down, Unknown, and Up options. I can't drill down on the Up targets but I can on the Down and Unknow targets. This functionality was working yesterday. We did have one incident on the managed targets where we accidentally removed the cluster listener but I don't think this could have any effect on the OMS. We quickly created a new listener anyway. In any case, I stopped and restarted the management agents, and also bounce the OMS by issuing an opmnctl stopall, but I still have the problem.
Has anybody come across this issue?

This is because target.xml has not been updated with same change,
Please reflect the same change in targets.xml ,bounce the agent and let us know the result.

BSP Application WFDS_RPA for Resource Planning is not available

Hi All,
I am trying to access Following iView from CRM through EP
Workforce Management> Resource Planning
While accessing the iView I am getting the following error
BSP Exception: the Application Name WFDS_RPA in URL /sap(ZT1Fb1VZNVpNVUhjM2U2alFTWVpGM29RJTNEJTNETHlZZ29VUlZjeEZRRHV5TjVjSiUyRlh3JTNEJTNE)/bc/bsp/sap/WFDS_RPA/Cmn_Root.do?sap-syscmd=nocookie&sap-client=200&sap-language=en&style_sheet=http%3A%2F%2Fmb1es1005.idcsap.com%3A50100%2Firj%2Fportalapps%2Fcom.sap.po is invalid.
I have checked on the SICF transaction for the following BSP application
WFDS_RPA.
But I could not found one on the list.
I have also checked the CRM BSP Application List. But It is not available there.
How can I check and get this BSP application ?
Need ur help.
Thanks and warm regards
Purnendu

Hi,
This will only be available if you have installed the add-on component WFMCORE. Please check if you have this or not.
Regards,
Saurabh

MRS: PRT Tool Resource does not appear in Planning Board

Hi Experts,
I am trying to perform tool assignment but somehow the tool resource does not appear in the planning board. I have the following set up:
- Tool created as both material and Equipment (category P)
- Equipment assigned to work center linked to Org Unit
- Order with operations created with PRT assigned
What I am seeing in the planning board:
- I can see the operation with the linked PRT
- I can see the HR resource under the same work center Org Unit
- However, I cannot see the Tool resource.
Am I missing somethng here? Any kind of pointers would be greatly appreciated.
Thank you in advance,
Jk

Thank you for your response, Varun.
I do have the equipment work center set to be the same as the operation work center. Also, when I try to add the PRT manually in the planning board, I get 2 error messages:
"Resource is not available"
"Selected equipment 0 is invalid"
Have you encountered this before?
Thank and Regards,
jk

The cluster resource could not be found-SAP ECC on Windows Server 2008 MSCS

Hi,
I'm installing SAP ECC 6.0 on Windows server 2008 MSCS Cluster. As mentioned in the guide, i've created a service and added a resource.
I was able to successfully configure the DB installation and cluster configuration. But when I start the ASCS installation, the installation fails when it tries to create system folders with the following error.
Error when sharing file system export (share) saploc : The cluster resource could not be found
I'm using a user with domain admin access and also a member of the local administrators group. I've even tried to install using the domain administrator user but still the problem exists.
Can anyone please let me know where am I going wrong ?
NB: The host on which I'm installing is not a domain controller but it is a member of a domain.
Regards,
Varadharajan M

Yes Krishna,
I've not created any shared folders manually and I've used the "Use domain of current user" option.
Actually SAPINST has created the usr and sap folder in the SAP drive (say E: drive) which is a clustered disk. The name of that clustered sidk is "Clustered Disk 1". I could able to open up the shared directories available in that SAP virtual host by issuing
<SAPGRP>. I don't know where am I going wrong:( I've also opened a call with a SAP and waiting for their reply.
Regards,
Varadharajan M

All website went "Not Found HTTP Error 404. The requested resource is not found." and the "Firefox cannot load websites but other programs can" page is not help

''dupe of https://support.mozilla.org/en-US/questions/928117''
all website went "Not Found HTTP Error 404. The requested resource is not found." and the "Firefox cannot load websites but other programs can" page is not helping in any ways

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router.

Resource plan not migrating to all targeted cluster members

Similar Messages

Maybe you are looking for