Restart synchron webservice in bpm

Hallo,
how it is possible to restart a synchron WebService in sxmb_moni within a integration process?
Thanks in advance,
Frank

Michal,
From a BPM, you sure can I have tried this. Dont remember the exact transaction.
This has been documented in this thread as well, am i missing something?
System Error u0096 Restart is Not Possible!
Regards
Bhavesh

Similar Messages

Synchronous webservice-Acknowledgement

Hi Experts,
I have a scenario where I need to communicate between a synchronous webservice and an Idoc(async).
Webservice Interface:(Sync)
Sender Message: Webservice Response
Reciever Message: Acknowledgement
Reciever Interface:(Async)
IDOC: ACC_DOCUMENT
The Webservice response message will be mapped to the IDOC.
The acknowledgement message also needs to be sent to the webservice as a response and that ack depends on the value of the webservice response field value.
Please suggest any design to execute the same.
Regards,
Akhil

U can design in two manners
1. The webservice execution could be done before message processing at XI, and directly webservice response is sent to XI to be mapped to the Idoc data. Here no ack handling would be required.
2. Use a SOAP client which sends data to XI. Make a sync call to webservice to fetch its data (Again 2 options exists, use BPM or use SOAP lookup). Now the response received can be mapped to Idoc structure.
Regards,
Prateek

Execute two synchronous mappings in BPM

Dear All,
i ahve the the follwing sceanrio to be execute in BPM.
My requirement is to execute two synchornous mappings which has one source structure coming in file format
i have mappe this message type with bothe the target messag etypes.
first mapping uses the synchronous webservice..once this webservice is execute it return the response,,now depending on the reponse of the webservice my sencond mapping i.e synchronous Jdbc mapping which will select a record from ORACLE has to execute and then the selected record has to be passed back to file system.
My scenaris is 1 file source xml to 2 synchronous mappings .these amppings shoul execute ina sequesnce
file(one source xml)-->sync Webservice mapping(returns success) and
same file(one source xml)-->sync jdbc mapping(execute depending on the success response from Webservice)
i configured receive sync->send sync(webservice syn interface)->switch(check success response from webservice)->sendsync(jdbc sync)->send response from jdbc(close s/a bridge).
I am wondering how will the data from one source XML will flow into two mapping interfaces?
do i need to change any steps in BPM.
please suggest
what will be the correct steps i need to configure in BPM
Edited by: Rohan Patil on Jun 29, 2010 3:03 PM
Edited by: Rohan Patil on Jun 29, 2010 3:05 PM

Thanks Shabarish,
i designed the same steps in IP...it worked on the very first shot ...
i waqs thinking i might get some erros but both the mappings got executed in a sequnece successfully..
Thanks for your help.

Parallel synchronous calls from BPM

Hi,
how many parallel synchronous calls can XI perform at once?
Reason why I ask, for me it looks like parallel calls are handled sequentially in XI.
My scenario: I have a ccBPM that should ask three different synchronous WebServices to collect data. In the BPM I used the Branch element where one synch call is in every branch.
Unfortunately at runtime the monitoring says that the WebServices are asked consecutive and not parallel.
Even if I start a performance test an run 10 BPMs at the same time, all WebServices are asked consecutive.
So is there a unknown hidden parameter to force parallel sync calls or is XI not able to perform such calls?
Regards,
Robert
(tested on 7.0 and 7.1)

Hi,
Maximum Number of receivers you couls send at a time are 999. So i think u can make 999 webservice parallel calls at a time.
Using BPM:
First have a receive step and then the receiver determination and the out put of this step would be a multi line element(containing all the receivers identified during the runtime).And then create a block step in par for each mode and in the properties give the multielement name created from the receiver determination step and then a send step in the block in synchronous mode.
In ID confgure all the receivers.
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 2, 2008 6:29 AM

Synchronous Webservice

Hi all,
I need to have a synchronous webservice to communicate with a synchronous send step in BPM.the output message of the webservice is defined and its of more relevence but cant specify the input message of the webservice.whether i need to make a dummy message type or aquery string.please anyone help me.
Regards,
Paul

HI,
If your sender or receiver is Synchronous Webservice and another side is Async then you have to go for Async to Sync or vice versa BPM bridge.
Please Refer
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
Thanks
Swarup

Error in the workflow which executes background synchronous webservice task

Hi,
I am very new to SAP Workflows. I created a workflow with one activity step in it. The activity step actually executes a task TS77000300 (synchronous calculation - its an SAP task). When I test it. I get an error "Error when starting the service" with exception 8987, area SWF_HTTP and message 125 - Object WEBSERVICE method PROCESSBATCH cannot be executed.
I checked in WF_EXTSRV tcode, there is an entry for the background synchronous webservice task.
I checked in SWLWPTSSID table, there is an mapping between task-id and service id from WF_EXT SRV.
I am not sure where its going wrong. Any help resolving this issue is appreciated. Thanks a lot.
Regards,
Raja

Gurprit/All
Thanks Gurprit for the direction.
Even if I execute the the workflow( WS77000647 from SAP). The first step invokes Process Dialog which asks for three numbers and two operands. When I input all the input params and click calculate button, the second step which is actually the background synchronous task, results in the same error in the workflow log and in the Process Dialog page browser it says "Entries sent for calculation" with the same input screen.
Am I missing anything here to run background synchronous task? Any help regarding this is appreciated.
Thanks & Regards,
Raja

File to Sync Webservice using BPM

Hi all,
My scenarios is File to Webservice and again the output of this web service to some other file...
I an refering a document in which its written as
*In the Integration Directory Create Configuration Scenario, Then create three communication channels, one for sending the xml file to the BPM, one for sending the request to Web Service from BPM and one for sending the response as xml file to the desired location.*
My doubt is do I need a communication chaneel for BPM also?
and if yes then what will be my receiver adapter in case of BPM.
Thanks in advance

Hi,
No need for 3 Communication channels.
you define a CC for Sender and another CC fro receiver(webservice)
In BPM we'll define the IM(this is between the two abstract interfaces)
Reward points if this is helpful
Thanks,
Madhu

IDoc to soap synchronous scenario with BPM

Hi,
I am working on IDoc to soap synchronous scenario using BPM. Here i am facing lot of soap exceptions in my production system. I handled the exceptions. The data getting excuted for the first time, the same data(just changed the description)is giving exceptions for the second time. Please let me know why the exceptions are getting, and different type of exceptions and solutions for the same.(Blog also is fine)
Thanks & Regards,
Pragathi.

The data getting excuted for the first time, the same data(just changed the description)is giving exceptions for the second
time.
Ideally you should not get an exception for the same data....can you tell is the description and where are you getting the exception...is it a part of the SOAP message or some object?
An exception might have occured because the description would be something unacceptable by the target application.
and different type of exceptions and solutions for the same
there would be many blogs....your thread would be spammed...better make a search on SDN with exception text that you are getting.
Regards,
Abhishek.

File to Webservice Using BPM

Dear Friends,
Kindly give me some walkthrough doucment for File to Webservice Using BPM
it is urgent. Kindly help.

/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
refer that to design your interface. Note that instead of RFC you will require to use a WSDL for the WS call.
Fotr more about WSDL and its usage in a scenario ref:
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2

Synchronous RFC exception BPM

Anybody has successfully getting the RFC.exception in a synchronous call via BPM? What i mean, is to get the RFC.exception then use it inside BPM.
I have already searched the forum, and i think nobody have done it before. Any clue guys??? Thank you very much in advanced....

Sorry, i still dont get it. Here i will illustrate my problem.
I got an abstract sync message interface (lets call it: MIAS_RFC) with structure like this:
1. Output Msg: From RFC
2. Response Msg: From RFC.response
3. Fault Message: From RFC.exception
I use MIAS_RFC in a SEND node in my BPM inside a block with exception handler branch for my RFC exception handling.
My purpose is to map the RFC.exception to other message interface abstract async inside the exception handler.
How can i do this? You said earlier that i should create another sync abstract message interface (MIAS) then use it in a mapping...Am i correct? Could you please describe to me more detail (sorry about this ) Thank you so much....

Restarting synchronous messages from sxmb_moni

Hi,
Please could anyone confirm if it is possible to restart synchronous messages from sxmb_moni.If in case the synchronous message is in error in moni,can it be restarted.
Thanks and Regards,
Induja

hi,
check these links:
/people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages,
Is Payload of SXMB_MONI stored in Some table?
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Thanks,

PI synchronous webservice performance

- Ever stuck with the question of ways to reduce the response times of XI webservices calls??
- Need better performnace
- Need better response times........
Just Published
/people/community.user/blog/2007/07/09/pi-beef-up-the-performance-of-synchronous-webservices
Cheers,
Naveen

Hello Michal,
Currently direct connection is only for the adatper. Since abap proxies don't recide on adapter framework this cannot be done. But you never know. For the first time SAP is using the term Service Bus in the presentation. This opens up a whole new space. if SAP is moving away from a central hub design to a more ESB(enterprise service bus) then there are new features to be explored.
Cheers,
Naveen

Timeout issues in synchronous webservices

Hi Everybody,
I am working on a synchronous webservice Interface in which sender is a Webservice and receiver is BAPI (RFC) and I need to handle the time out issue when i dont get the response from the receiver SAP system.Also need to raise an alert.
Can anybody help me out on this.
Helpful answers will be rewarded points.
Regards,
RK

Hi,
For the timeout issue look at these:
Web Service Timeout Configuration
SOAP adapter - Module options...
For the alert I think you should take a look at these:
Does XI support standard SOAP Fault exceptions?
SOAP Fault message (***)
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI
Hope it helps.
Best Regards,
Arman
(Please mark your question as answered when it is solved)

Synchronous Send in BPM restartable?

I have a XI scenario with BPM,
in the BPM, there is a Synchronous send (calling BAPI in another R/3 system - RFC receiver adapter),
the problem is:
in case of failure due to target system unavailale, my scenario fails (Sync send fails - while calling BAPI), is there any way by which i can resend this message or restart the scenario from this point,
pls help,

Hi ,
We can resend the message from the particular point in BPM using Reconciliation concept in BPM once the application errors or system errors would be corrected.....
Check this one....
/people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Thanks,
Sekhar D

Restart of Synchronous messages in BPM

Hi All:
I have one scenerio(using BPM). BPM is sending message to JDBC(Asyn lets say system A) and HTTP(Sync lets say system B).
I am sending message to both system A and B using Fork, but when system B is down I am seeing I got the Error in response and found restart of message is not possible.
Now if again I send the same message then it will be duplication of records in system A as I am only inserting records in system A.
How can I achive it in BPM??? so I can avoid the duplication in system A.
Thanks
Farooq.

Hi,
use async mode to system B
this way in case of an error it will be restarted
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Restart synchron webservice in bpm

Similar Messages

Maybe you are looking for