File to Webservice Using BPM

Dear Friends,
Kindly give me some walkthrough doucment for File to Webservice Using BPM
it is urgent. Kindly help.

/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
refer that to design your interface. Note that instead of RFC you will require to use a WSDL for the WS call.
Fotr more about WSDL and its usage in a scenario ref:
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2

Similar Messages

  • Problem with File RFC File scenario without using BPM

    Hi all,
      I am trying a File RFC File scenario without using BPM with the help of the following thread:
    File - RFC - File without a BPM - Possible from SP 19.
      The XI system is PI 7.0 sp 12. When I am trying to acheive the above scenario, I am getting wierd results i.e., when I observe in SXI_MONITOR, the message is showing as processed successfully, but when I watch the message status in communication channel monitoring, I am getting the following error:
    "Attempt to process file failed with com.sap.aii.af.service.cpa.CPAException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=DEV120;TS=Test_Service;AN=MI_Invoice;ANS=urn:sap.com:test;"
    I am not able to understand what the problem is. By the way, one more thing, is, I have kept the File processing mode as "Delete" in the sender file adapter. But the file is not getting deleted. I think the reason could be because of the above error.
    Can any body help me out in getting my problem resolved?
    Thanks,
    Adithya K

    CPA Cache Refresh from the Adapter Engine To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following
    URL: http://<host>:<port>/CPACache/refresh?mode=<b>delta|full</b>
    The Monitoring url is like this: http://<host>:<port>/CPACache
    Thanks & Regards,
    Farooq.

  • File to Database Using BPM

    Hi All,
    I am trying to do one of the End-To-End scenarios which are described in the following document published by Mukeshlal Parida https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
    I followed the steps described for the File to Database Using BPM. 
    I created a software component File Workshop and DB Workshop and created the respective products.  I created the appropriate namespaces under the specified products.  However, when I go to create the container elements in the Integration Process, I am only able to view and add the Abstract interfaces created in the specific software component where I am creating the integration process. 
    The instructions are not clear.  I am on XI 3.0 (SP16).  Any help would be appreciated.
    Thanks
    Sandeep

    Hi,
      U can use the abstract interfaces in BPM.
      U have to define all the Interfaces as Abstract and use in BPM transformations. The Container elements are specific to the Software component.
    From...
    Yallabandi.

  • File to Sync Webservice using BPM

    Hi all,
    My scenarios is File to Webservice and again the output of this web service to some other file...
    I an refering a document in which its written as
    *In the Integration Directory Create Configuration Scenario, Then create three communication channels, one for sending the xml file to the BPM, one for sending the request to Web Service from BPM and one for sending the response as xml file to the desired location.*
    My doubt is do I need a communication chaneel for BPM also?
    and if yes then what will be my receiver adapter in case of BPM.
    Thanks in advance

    Hi,
    No need for 3 Communication channels.
    you define a CC for Sender and another CC fro receiver(webservice)
    In BPM we'll define the IM(this is between the two abstract interfaces)
    Reward points if this is helpful
    Thanks,
    Madhu

  • File to Idocs using BPM

    Hi,
    Current Interface Flow - File (xml) to Idoc (single Idoc type)
    Thirdparty sends a File for Goods Receipt. This file may have multiple orders.
    Orders are sorted in an xslt by ORDNUM. Each record has a delivery type (Deliver Type PO or Delivery Type STO). For each order Graphical Message mapping occurs.
    In case of PO, inbound delivery number and item number have to be received from ECC via an RFC call and passed to VBELN and POSNR. While in case of STO, source field ORDNUM and ORDITEM are passed to VBELN and POSNR. (RFC call happens only for POs, not for STOs)
    In case of STO, TCode  will be MB0A.and IDoc would be WMMBXY (As is the case right now)
    In case of PO, there may be two cases -
         a) There is at least one response from ECC for all the line items inside an order --> in this case TCode will be MB0A and IDoc is  WMMBXY .
         b) If there is no inbound delivery number for any line item from ECC inside an order --> TCode MB01 will be used and IDoc used is WMMBXY
    So for all the above cases Target IDoc is WMMBXY.
    Changes to be done - Now  File (xml) to Idoc (Two different Idoc types, WMMBXY and DELIVERY03)
    Now there is an additional requirement that I will be using an additional IDoc (DELIVERY03) in above case a).
    I want to use BPM in this case
    1) RFC call in message mapping to get the inbound delivery number (for POs only) (Should be before the message enters BPM)
    2) Separating the messages based on IDoc type
    3) Interface / Message mapping for each IDoc type
    4)Send the message to ECC
    Please suggest how to proceed with BPM
    Thanks,
    Varun
    Edited by: Varun Reddy on Feb 4, 2011 4:47 PM

    Hi Varun,
    Follow this thread... You have answer for this.
    This link gives design ideas for your requirement
    /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    Follow Bhavesh discussion. It might be helpful too
    Message Split: File to Multiple IDOC Types

  • File to RFC using BPM

    hey guys
    i m doin a synchronous File to RFC scenario using BPM and getting a 'NO receiver found error' in MONI,i checked my File as well as RFC adapter in RWB,the sender File adapter is green,RFC adpater is also green and the receiver file adapter is green but says 'no message processing until now'
    i m takin help from the followin blog
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    the error in MONI is
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Receiver Grouping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>No receiver could be determined</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    I checked SM58 as well but it does not have any error XML messages.
    and idea where shuld i check?
    i check my mappin by using payload from MONI,mapping is working fine
    thanx
    ahmad
    Message was edited by:
            Ahmad ansari

    Hi Ahmad,
    In which step is the error occurring?
    Have you checked your BMP status using SXMB_MONI_BPE?
    PS: Usefull link: <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c">How To Monitor Integration Process (ccBPM)</a>
    Regards,
    Sergio

  • How to merge/append two files in sequence using BPM

    Hi All,
    My senario is to append two files data into a  new file on target system, only if the two files are available on source system. In case one file on the source system, no need to process file. Data in the new file should be in sequence means 1st file data then 2nd file data.
    Please suggest me how can i achieve this functionality using BPM.
    Thanks & Regards
    Sreeni

    For the first part (two files required) design as per Prateek's suggestion
    Data in the new file should be in sequence means 1st file data then 2nd file data.
    create a data structure which will be a combined structure of File1 and File2....target structure should have first reference for File1 and then for FIle2....than having two MTs (File1 and File2) at the source and the target MT at the receiver create your mapping......this will ensure that File1 data occures first and then File2 data.
    Regards,
    Abhishek.

  • FILE TO IDOC USING BPM

    Hi,
             I am the fresher and new to XI. I want to know the step-by-step procedure for file to idoc scenario using bpm.I require it urgently.
    Please help me out.
    Thanks and have a nice day.

    Sangeet - Check this blog :
    <a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to multiple IDocs using IP in ccBPM</a>
    Hope this helps.
    Cheers!
    Shireesh M

  • Multiple files to single using bpm

    Hi,
    Scenarion : 6 files to 1 file using BPM
    ( 6 files are generated from the tool in a folder )
    Files
    abc1xyz_20101210.txt
    abc2xyz_20101210.txt
    abc3xyz_20101210.txt
    abc4xyz_20101210.txt
    abc5xyz_20101210.txt
    abc6xyz_20101210.txt
    Conditions
    1) Sender File Adapter needs to pick the files when all the files are generated .
    2) Should not pick the duplicate files
    (eg : abc1xyz_20101210.txt
             abc2xyz_20101210.txt
             abc1xyz_20101211.txt
    abc1xyz was repeated 2 times , ignore the file before file is picked.
    ponints will be awarded
    Thanks

    Hi,
    I prefer these kind of check can be easily done by the sender system or tool while generating those files itself..
    that is during the generation of file if the file already exists then overwrite the content or delete the existing file and create new file...
    other option can be..using OS scripts to validate the file name till 4 characters..read the file name and take first four chars and compare it with the all other files...
    I cannot provide the exact code but check with some scripting guys..I think the above logic can be achievable..
    HTH
    Rajesh

  • Webservice to JDBC to SAP System to webservice using BPM

    Hi Frnz
    My requirement is i need to get data from webservice....... and i need to push that data to some Database... and the response from the Database to SAP system......and from that SAP system  the respone should come to the Webservie which is the sender one. and the whole procedure should be done under PI7.1. using BPM.
    can any one suggest me how to achieve this whole process... related links and your views.
    MunnaV

    Hi,
    I will tell you how to search for that :
    1. find  BPM blogs in the forum - to get the idea of a BPM
    2. then find the blogs about SOAP adapter for WS call and JDBC call and ABAP proxy (for SAP)
    3. then combine it and you have the scenario
    you don't need links from us, you can get them on your own
    we can help you with detailed questions once you start the development
    Regards,
    Michal KRawczyk

  • RFC(Bapi) to Webservice using BPM

    Hi,
    Can anybody explain me how to do RFC TO Webservice (whole scenario is synchronous) using BPM.My scenario is I have a sender RFC where I need to call two webservices in sequence.Appreciate any help guys.
    Thanks
    Points will be awarded

    Hi,
    Yesterday itself I asked u in the other thread, but u didn't reply to my question. Since you are calling two webservices which Webservice response do u want to send back to RFC? Do u want to combine both the responses and send back together?
    raj.

  • Multimapping(File to RFC) using BPM...issue!!!

    Hi
    Am working on following scenario:
    #Two request files merged to map to RFC request ( 2:1mapping )
    RFC response is split into two response messages( 1:2 ).
    I have done the whole thing in BPM that looks somewhat like this :
    Fork(Rec1 , Rec2)-> Transformation1(2:1 map) -> Send(Synchronous BAPI call) -> transformation(1:2 map) -> send(Response 1) -> send(Response 2)
    1st part i.e File Merge(2:1) works fine and the request is formed as desired. Next step when synchronous call is made to the RFC the response recieved is where i am facing issues. I dont get the expected response and eventually the following steps fail.
    When tested the same RFC(BAPI_SALESORDER_SIMULATE ) in tx SE37 with same data it works fine.
    But when same data is sent from XI it returns a error message in place of the response.
    Error Message states "Please enter SoldToParty or ShipToParty Number" .
    Irony is sold-to-party is sent in the request message and can be seen in payload in monitoring.
    Any kinda help is appreciated !!!

    > 1. Make sure that bapi commits...there will be a check box option in RFC receiver CC side for this.
    >2. Make sure that Sold to party/bill to party field is of 10 char before passing it to SAP.
    @ Santosh :
    I checked the tab in CC but still the same issue...Do we need to add something to the Name/Value section below that?
    And yeah I am sending 10 digits only..
    BTW do we need something additional when we call a BAPI from XI apart from the data we normally use in  tx SE37.
    Can my Configuration be a problem?
    For this synchronous call in BPM I have created :
    a) 2 interface determinations...One from BPM to ECC and another from ECC to BPM. But both are without any operation mapping as the message types are same & both are synchronous...
    b) 1 receiver determination i.e : from BPM to ECC.
    c) 1 receiver agreement.

  • Idoc to Webservice using BPM

    Hi
    I am using the BPM for the IDOC to Webservice Synchronous Scenarion...
    When i trigger the IDOC from SAP it stuck in the Queue ...when i checked in the SXMB_MONI and when i clicked in PE it taking me to the INbound Queue ..
    When i opened the Queue its showing the SYSFAIL ..and when i double click on that its shoes me Permanent ERRor in BPE Inbound Processing..
    In BPM i used the Receive and Send Synchronous and Send Asynch steps ..
    Did i miss Any thing
    SV

    HI,
    I think for IDOC to Webservice you are going for Async to Sync bridge with BPM and have the similar steps as mentioned in below link.
    Asyn - Synch BPM - Async/Sync Communication using JMS adapter without BPM (SP 19)
    If there is some other flow plz let me know. Also let me know the exact error that you are facing with it.
    Thanks
    Swarup

  • Combined FIles in PI using BPM without correlation

    Hi All
    I have a requirement, I have two files coming from the source system one file with Header Detials & other file with Item Detials and I have to combine these two files into a single file.
    I have used the BPM in PI to combine the two files uisng correlation.
    This scenario is working fine if both the files are having equal number of records wiht the same correlation ID.
    Based on the correlation ID files will be combined in PI and send to the target system.
    Now in case I am receiving the files in which corelation is not matching for few records then in that case process in waiting in BPM and get cancelled after some time & files will not be processed.
    Do we have any option in BPM which will just cominge two files without correlation & passed through BPM & files got processed?
    Thanks for your help in advance.
    Thanks
    Ajay

    Hello Ajay,
    I do agree with Anudeep that corelation is necessary to in order to merge the two messages.
    I am sure you will find a correct corelation factor in order to merge the messages.
    If there is no corelation, you can ask the functional consulatant to add certain veriables in the incoming messages that will corelate the messages.
    Tx
    Saurabh

  • How to send 100 records from an IDOC to File Scenario without using BPM?

    Hi All,
    I have a requirement that i need to send 100 records from sap to file by using the scenario IDOC to File. Can you suggest how can i achieve this?
    Regards,
    Ramvilas.

    Hi,
       Create a H type RFC destination.Tagert host and port give  Xi system host and port.Path give the
       /sap/xi/adapter_plain?namespace=<NameSpcae>&interface=<Interface> &service=<SenderBusinessSystem>&qos=EO or EOIO.
    Go to we21 find xmlhttp port.give the port name and assign RFC.Give the port in we20 your idoc and change to collective.
    In Xi export the IDOC and change the occurance to 0-unbounded and import it.
    Regards,
    Prakasu.M

Maybe you are looking for