Restarting J2EE after changes in XCM

Hi!
When I have done changes in XCM I have to restart the Java application.
How do I do it?
This might be a "stupid" question, but I don't know how to do it!
So far I have stopped and started the whole system, both ABAP and Java, via the SAPMMC control panel. This doesn't seem to be the best way since it takes some time to start the whole J2EE engine.
regards
a bit embarrassed rollo

Hi Rollo,
You can restart the JAVA Engine from transaction SMICM. Go to Administration -> J2EE Server -> Restart -> Yes.
Hope this help!
Juan
Please reward points if helpful

Similar Messages

  • J2EE Engine - Restart necessary after changing web.xml?

    Hi people,
    do I have to restart the whole J2EE Engine after changing the <max-sessions> parameter of my J2EE-App? Or is a restart of the app via the deploy service also sufficient?
    This parameter change is done in web.xml on 620 and web-j2ee-engine.xml in 640.
    Thanks!
    Bjoern
    Message was edited by: Bjoern Altmannsberger

    restart only the application via deploy service
    regards,
    Violeta

  • Restart J2EE after RFC re-import

    Hi all,
    It is necessary or is there another workaround in order to avoid the Restart of the J2EE after RFC re-import?
    I was wondering if this is really necesary because in mayor developments scenarios, all the developers must stops their developments in order to one of them gets the reimport of their RFC.
    Any suggestions or comment would be appreciated.
    Regards,
    Orlando Covault

    Hi
    It is recommended to restart the J2EE Engine after reimporintg the model because metadata will not be refreshed,
    The Web Dynpro Adaptive RFC framework sits on the top of several layers such as the Java Connector Objects (JCO), Data Dictionary (DDIC) and the MDI.
    After the first access each of these layers caches the metadata within them and keeps returning the cached values thereafter. The caches are not refreshed even if something would have changed in the metadata on the R/3 backend. In addition the Web Dynpro ARFC model itself also caches the metadata. The new invalidation tool will try to refreshes the caches across all the layers. The earlier solution to refresh the caches was to simply restart the engine.
    Please look into this Blog, [reimporting a Model without restarting |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10465350-b4f5-2910-61ba-a58282b3b6df]the J2EE Engine.
    Best Regards
    Chaitanya.A

  • I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browers after quiting and restarting after changing the preferences

    I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browsers after quitting and restarting after changing the preferences

    How about extensions? Perhaps you have an adblock extension installed.
    Check Safari > Preferences > Extensions

  • Do any services require a restart after changing Message Retry Interval?

    I'm trying combat a "grey-list" issue by changing the Message Retry Interval to 15 min from 1 min. I did this change about 12 hours ago and
    I my test messages are still sitting in queue. I suspect a service restart is needed. Any ideas?
    Set-TransportServer SAC79906MAILP01 -MessageRetryInterval 00:15:00
    Thanks much! :-)

    Hi CalAdmin,
    Exchange 2007 Hub Transport definitely required a restart for that Change :
    http://blogs.technet.com/b/exchange/archive/2006/11/17/configuring-exchange-2007-hub-transport-role-to-receive-internet-mail.aspx
    Tested your Setting in our lab, also :) after a restart at least the Setting is effective/working.
    Regards,
    Martin

  • My ibook keeps shutting down completely with the date to reverting back to 1969.  i restart only after i plug in charger it lets me, then change date and save.  the next time i use same thing happens, safari, iphoto, email are the only ones i have used.

    my ibook keeps shutting down completely with the date to reverting back to 1969.  i restart only after i plug in charger it lets me, then change date and save.  the next time i use same thing happens, safari, iphoto, email are the only ones i have used.
    please help!  i am at a loss here.
    thank you, movie lady
    ibook g4

    The iBook does not have a backup (PRAM) battery. It only has the main battery and a small capacitor which maintains the settings long enough to do a battery swap. If the battery is dead, what you are seeing can happen.
    If the battery is not a problem (or even if it is), you could try resetting the PMU and see if that helps.

  • Error after changing datasource

    Hi Experts,
    one of our test systems (IDES) with doule stack including NW Portal is connected to the client 001.
    As we have a lot of users in the client 800 we want to change the configuration of the UME to client 800.
    We used this SAP Help Link:
    [Configuring the UME to Use an AS ABAP as Data Source|http://help.sap.com/saphelp_nw70/helpdata/de/9e/fdcf3d4f902d10e10000000a114084/content.htm]
    After changing the Client in the useradmin page of the J2ee UME configuration - a connection test runs successfully.
    But after restarting the server:
    Server is stopped - Dispatcher is running but no server connected.
    dev_jcontrol:
    [Thr 3440] JControlICheckProcessList: process server0 started (PID:2008)
    [Thr 3440] Mon Sep 29 16:34:14 2008
    [Thr 3440] JControlICheckProcessList: process server0 (pid:2008) died (RUN-FLAG)
    [Thr 3440] JControlIResetProcess: reset process server0
    [Thr 3440] JControlIResetProcess: [server0] not running -> increase error count (4)
    [Thr 3440] JControlICheckProcessList: running flight recorder:
    std_server0.out
    [Framework -> criticalShutdown] Core service security failed. J2EE Engine cannot be started.
    Sep 29, 2008 4:34:12 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_39] Fatal: Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.
    dev_server0
    [Thr 5748] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 6092] Mon Sep 29 16:34:09 2008
    [Thr 6092] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 6092] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
    [Thr 6092] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
    [Thr 5064] Mon Sep 29 16:34:12 2008
    [Thr 5064] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 5064] **********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'
    for additional information and trouble shooting.
    My first thougts were to check the RFC/JCo connections - so I changed the configuration to the old one via ConfigTool - UME.Services - restarted the J2EE engine.
    Log to SM59 and Configtool. I regenerated the JCo Connection for sapfallback (was not available) and to the portal itself - Tested the connections in SM59 TCP/IP - successfully tested.
    So i tried the changes again (client 800)- with the same errors as above?
    Any idea what causes this misbehaviour? Or is the SAP help link only for initial setting of UME? Are there additional steps when changing from one ABAP Host (or client) to another?
    Thanks in advance
    kind regards
    Tom

    Sometimes I`m a mess!
    Look at default trace error:
    #1.5 #005056827C490074000002DB00000A08000451F31E6385D7#1216004535546
    #com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.R3Persistence][md=populatePrincipalDatabag(AttributeList)][cl=null]
    #J2EE_GUEST#0##n/a##2ce6913050ba11dd8d2d005056827c49#SAPEngine_Application_Thread[impl:3]_6##0#0#Error##Java###
    An exception was thrown in the UME/ABAP user management connector. This exception might be caused by incorrect user input.
    It is written to the trace to assist incident analysis by SAP. Only messages also appearing in the log require administrator assistance.
    [EXCEPTION]
    #1#com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
    Connect_PM  TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
    LOCATION    CPIC (TCP/IP) on local host with Unicode
    ERROR       partner '127.0.0.1:sapgw00' not reached
    TIME        Mon Jul 14 05:02:15 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2823
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUNTER     82
         at com.sap.security.core.persistence.datasource.imp.r3persistence.R3JCo640Proxy$Client640.execute(R3JCo640Proxy.java:465)
         at com.sap.security.core.persistence.datasource.imp.R3Persistence.doBapiUserGetDetailInternal(R3Persistence.java:5238)----
    Any ideas?
    kind regards
    Tom
    Update:
    - the host file contains localhost and service file contains sapgw00 with 3300/tcp?
    - the java stack runs unter https, http is only available for localhost, may this be the problem?
    - Which JCo connection causes this error - actually there are three JCo Connections maintained in VA - .. - JCo RFC Provider - NONE of them connects to localhost??
    Edited by: Tom Uhl on Oct 10, 2008 10:12 AM

  • Server0 node restarts automatically after 10 minutes...

    Hello Portal ppl..
    I have encountered a troublesome porblem at My portal server.
    Server0 node restarts automatically after 10 minutes...showing yellow status..
    Following is developer trace of server0 node:
    [Thr 373752] Tue Dec 30 12:52:01 2008
    [Thr 373752] JLaunchISetClusterId: set cluster id 12403050
    [Thr 373752] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 373752] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 377684] Tue Dec 30 12:53:00 2008
    [Thr 377684] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
    Following is developer trace of jcontrol.exe node:
    [Thr 379212] Tue Dec 30 12:51:37 2008
    [Thr 379212] JControlICheckProcessList: process SDM started (PID:379984)
    [Thr 379212] Tue Dec 30 12:51:57 2008
    [Thr 379212] JControlICheckProcessList: process server0 (pid:380868) died (RUN-FLAG)
    [Thr 379212] JControlIResetProcess: reset process server0
    [Thr 379212] JControlICheckProcessList: running flight recorder:
         C:\j2sdk1.4.2_12\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID12403050 1230620106 -bz D:\usr\sap\E70\SYS\global
    JControlStartJLaunch: program = D:\usr\sap\E70\JC01\exe\jlaunch.exe
    -> arg[00] = D:\usr\sap\E70\JC01\exe\jlaunch.exe
    -> arg[01] = pf=D:\usr\sap\E70\SYS\profile\E70_JC01_infpu05445
    -> arg[02] = -DSAPINFO=E70_01_server
    -> arg[03] = -nodeId=1
    -> arg[04] = -file=D:\usr\sap\E70\JC01\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_359972
    -> arg[06] = -nodeName=ID12403050
    -> arg[07] = -jvmOutFile=D:\usr\sap\E70\JC01\work\jvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=D:\usr\sap\E70\JC01\work\std_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=D:\usr\sap\E70\JC01\work\dev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = -debugMode=yes
    -> arg[15] = pf=D:\usr\sap\E70\SYS\profile\E70_JC01_infpu05445
    -> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;D:\oracle\E70\102\bin;C:\Program Files\CA\SC\CAWIN\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA~1\CA\SC\CAM\bin;C:\Program Files\CA\DSM\bin;D:\usr\sap\E70\SYS\exe\uc\NTI386
    -> exe path = PATH=C:\j2sdk1.4.2_12\bin;D:\usr\sap\E70\JC01\j2ee\os_libs;D:\oracle\E70\102\bin;C:\Program Files\CA\SC\CAWIN\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA~1\CA\SC\CAM\bin;C:\Program Files\CA\DSM\bin;D:\usr\sap\E70\SYS\exe\uc\NTI386
    [Thr 379212] JControlICheckProcessList: process server0 started (PID:358680)
    Please Help.....

    Hi,
    To see the log files,
    You can create an iView based on the below par file
    com.sap.portal.runtime.admin.logviewer.
    Use the component default in the PAR File.
    Preview this iview to see the console for logs.
    And regarding your error,Please check if the there is free space in the Hard Drive of USR folder
    Also recheck the JVM settings according to Note 723909 - Java VM settings for J2EE 6.40/7.0.
    Based on the 32 bit or 64 bit OS,the parameter values differ
    Following are the Parameters for 64 bit OS.
    -XX:MaxPermSize=512M
    -XX:PermSize=512M
    -Xmx2048M
    -Xms2048M
    -XX:NewSize=320M
    -XX:MaxNewSize=320M
    Hope it helps.
    Cheers,
    Santhosh

  • Message Server Unreachable (after changing IP address at host)

    Hi guys,
    I changed the IP address in my server. According to note 403708, I updated the new IP address in /etc/hosts. The note also suggests me to change in /etc/services but I see no IP address for me to update.
    Later when I restart my sapinstance, I see the disp+work.exe is "Running, but Message Server Unreachable". I've also updated the IP address in SM59 but I see no change.
    This is what I got from dev_rfc.trc:
    ERROR file opened at 20071206 221839, SAP-REL 620,0,674 RFC-VER 3 549374 MT-SL
    T:5048 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1400
    T:5048 <* RfcDispatch [1] : returns 1:RFC_FAILURE
    This is what I got from dev_disp:
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3212]
    Anyone has any idea?

    Yes I'm on Windows, the path that i'm refering is:
    winnt/system32/drivers/etc/services
    winnt/system32/drivers/etc/hosts
    Anyway my prob is fixed now. Probably the problem is due to I did not restart the server after changing the IP. Anyway everything looks pretty fine now
    Thanks guys

  • Dear Apple Support,  Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..  After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need  to resto

    Dear Apple Support,
    Good day to you.
    This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
    After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need  to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
    After restoring it my ipad is now opening and it is like new that i need to set up again.
    I set up again until i reach the apple id and password.
    I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
    What will I do? Please help.
    Thank you
    Sent from my iPhone
    Begin forwarded message:
    From: Apple <[email protected]***>
    Date: October 9, 2013 at 11:53:53 PM GMT+4
    To: ****
    Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini 
    Dear Leslie J.,
    Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
    If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
    Apple Support
    <Email Edited By Host>

    1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
    2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
    Is your iPad working?

  • Internet very slow after changing my previous airport extreme to my new 2T TC

    Hi,
    I just got a new 2T time capsule to replace my Airpot Extreme that worked fine. After installing it I chose to import a previous wifi network to the new TC and my internet became very slow. I read a few online documents sugesting that the internet slows down when backing up large data, but I dont think it is backing up (I did a force quit on systems preferences that "froze" with the cursor becoming a spinning ball) and after that tryed to restart my mac pro, but it has been recovering space from file vault for 2 hours. I am trying to access the internet from my mac air, but the speed is 10% of what I usually get.
    Any suggestions? Starting to regret getting the TC, I had high expectations about it.
    Thanks
    Rubens

    Thanks William.
    I got help from Apple by phone and aparrently after importing the old airport extreme configurations, my time capsule ended with wrong "Radio channel selection" and after changing the 2.4Ghz to 9 and the 5Hhz to 157 the internet connection is back to normal. thanks

  • Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days.  I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

    Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days.  I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying.  iPhone remote app works just fine.  Any suggestions?

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • SSRS 2008 R2 Services not restarting automatically after reboot

    SSRS 2008 R2  Reporting instance not restarting automatically after patches install.  Is there a way to resolve the issue
    Windows 2008 R2 Server
    16 GB RAM

    Hi,
    Follow this article to resolve the issue:
    Reporting Services service doesn't start after the installation of MS12-070 security patch
    http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx
    Workaround 1:
    Modify the registry to increase the default time-out value for the service control manager. To increase this value to 60 seconds, follow these steps:
    1. Click Start, click Run, type regedit,and then click OK.
    2. Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control.
    3.  In the right pane, locate the ServicesPipeTimeout entry.
    Note If the ServicesPipeTimeout entry does not exist, you must créate it. To do this, follow these steps:
    a.On the Edit menu, point to New, and then click DWORD Value.
    b.Type ServicesPipeTimeout, and then press ENTER.
    c.Right-click ServicesPipeTimeout, and then click Modify.
    d.Click Decimal, type 60000, and then click OK.
    This value represents the time in milliseconds before
    Restart the computer for the changes to take effect. Check that SSRS services can be started now.
    You cannot start SQL Server Reporting Services after you apply the update that is discussed in KB 2677070
    http://support.microsoft.com/kb/2745448/en-us
    Thanks.
    Tracy Cai
    TechNet Community Support

  • IC intermittent SAPSQL_ARRAY_INSERT_DUPREC error after changing business partner

    Hello,
    after upgrading from CRM5 to CRM7 (Service for Employee), our Interaction Centre users started getting intermittent SAPSQL_ARRAY_INSERT_DUPREC screen dumps when clicking on the 'Save' button after having changed a partner number in the Partners Table of a Service Ticket.
    On encountering one of these screen dumps, the user then has to close their IC session and then restart it - after which it is then possible to successfully 'Save' the same change to the same business partner on the same Service Ticket.
    I have not been able to reproduce this error due to its intermittent nature.
    Details of the source code extract from the ST22 dump is given below.
    Has anyone else encountered such an issue themselves?
    thanks,
    Martin
    Category ABAP Programming Error
    Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
    Except. CX_SY_OPEN_SQL_DB
    ABAP Program SAPLCOM_PARTNER_DU
    Application Component CRM-BF-PD
    Date and Time 20.08.2014 11:15:25
    Line SourceCde
      41 * data definitions
      42 DATA: BEGIN OF ls_attribute_record_to_use,
      43 partner_guid TYPE crmt_partner_guid,
      44 values TYPE text255. "has to be as long as the longest
      45 "attribute structure
      46 DATA: END OF ls_attribute_record_to_use.
      47
      48 DATA: lt_attribute_records_to_use LIKE SORTED TABLE OF
      49 ls_attribute_record_to_use WITH UNIQUE KEY partner_guid,
      50
      51 lv_tablename TYPE tabname,
      52 ls_attribute_record TYPE crmt_partner_attr_du,
      53 lv_name TYPE char64.
      54
      55 FIELD-SYMBOLS: <values> TYPE ANY,
      56 <address> TYPE crmt_partner_address,
      57 <fs_insert_record> TYPE crmd_partner,
      58 <fs_addr_ref_data> TYPE crmt_partner_address_reference.
      59
      60 FIELD-SYMBOLS: <wa_to_proceed> TYPE ANY,
      61 <table_to_proceed> TYPE ANY TABLE.
      62
      63 DATA: wa_to_proceed TYPE REF TO data.
      64 DATA: lt_wa_table TYPE REF TO data.
      65
      66 *** MAINTAIN PARTNER RECORDS *******************************************
      67
      68 *** records to insert
      69 IF NOT it_partner_records_to_insert IS INITIAL.
      70
    >>>>> INSERT crmd_partner FROM TABLE it_partner_records_to_insert.
      72 IF sy-subrc NE 0.
      73 MESSAGE a002(com_partner) WITH gc_object_name_partner.
      74 ENDIF.
      75
      76 ENDIF.
      77
      78 *** records to delete
      79 IF NOT it_partner_records_to_delete IS INITIAL.
      80 DELETE crmd_partner FROM TABLE it_partner_records_to_delete.
      81 IF sy-subrc NE 0.
      82 MESSAGE a002(com_partner) WITH gc_object_name_partner.
      83 ENDIF.

    Hello Atul,
    thanks for your message. I have had a look at the SAP notes that you have pointed me to, however they unfortunately do not relate to the functionality where we are encountering this problem:
    1914117 - Relates to Sales (not Service {Employee})
    1823316 - This error occurs in the wrong FM (BUR_BUPR_UPDATE) rather than FM COM_PARTNER_UPDATE_DU.
    1809361 - Relevant for the SAP GUI transaction, 'BP', not the Interaction Centre which iswhere this error is occuring.
    SAP have not been able to help because of its intermittent nature, it is not possible to create this error on demand, and as I am working on a secure site SAP cannot open a remote connection.
    thanks,
    Martin

  • Issue with bringing up Weblogic 10.3 after changing username passcode

    I am facing Issue with bringing up Weblogic 10.3 after changing username passcode in security realm Madhok, basically i have removed the default weblogic user and defined m,y own custome user and provide the credentials in the server start tab. When i try and bring up the admin server it comes up fine but the managed servers fail to start from admin console and i can see security credentials authentication error in logs? Why would that be considering the admin server is able to come up with the same credentials.
    -Priya Madhok
    Systems Architect
    InterAlliance Group Services
    http://www.interalliancegroup.com

    We had similar problem in the past, our problem was:
    Problem:
    We deleted weblogic default user from security realm and create new user when node manager and the managed servers were down. When we tries to bring up the managed servers after starting node manager we kept getting authentication denied errors.
    Solution:
    Recreate weblogic user and now try and bring up managed servers from command line using weblogic user. Once they are up shut them down and bring them up again with the new user you have created and it will work
    Reason:
    The managed servers in 10.3 seems to be storing the authentication details in there local managed servers ldap or cache. When you start the managed servers the don't know the new credentials and are authenticating against older values of stored credentials, hence they fail. Once they are started with the old credentials they communicate with admin servers to sync there cache with admin servers and the new credentials gets updated and from then on you can restart the managed servers with new credentials.
    Note: Sometimes after restart you may face the problem as the sync process with admin server is asynchornous, weblogic prints a line saying something like Performing async operation with server address null. If the line gets printed sync has happened and you are good. In case you don't see the line restart again and you will see the line after which you can restart with new credentials.

Maybe you are looking for