Restarting/resetting my device did NOT resolve this problem. What is the hang up? Why can't I backup my iPad???
The original iPad cable was damaged while on vacation. Does the backup process require the proprietary cable to facilitate the connection for backup?
Note: synching works fine. This is about backups..NOT synching.
The iPad syncs fine. It's when I try to create the back up that's the problem.
I have the cable for my iPod Touch (3rd Gen) and a replacement cable bought with a 3rd party charger specifically for charging iPads.
Similar Messages
-
SIX devices... not one recognized by ITunes. Three IPods, two iphones and an ipad.. This is ridiculous. It's been a month. When am I going to be able to fix this?!
Who are you? Me? I have an iPad, 3 iPods, and an iPhone (ok, only 5 devices, maybe you aren't me). None of them will synch with iTunes ever since I upgraded iTunes to 11.1.4.62. I am trying to figure out how to revert to 11.0 or 10.x.
If you want, you can try the official technote, but none of them worked for me, and they take quite a bit of time to slog through : http://support.apple.com/kb/TS1363?viewlocale=en_US -
I can not get apple mobile device to activate. When reinstalling itunes it still comes up with, Service 'Apple Mobile Device' failed to start. Verify that you have sufficient services. I have followed all fixes and can not resolve this problem?
Thanks to the suggestion of Doehunter the problem has been resolved
-
Updating to the latest iOS on my iphone 5 did not resolve this issue, the only way I've found round it is to switch the mode off
Do Not Disturb mode stays on after scheduled time
-
I have the new iOS 6.1.2 on my iPad. My wifi connects to my home network but keeps dropping it and won't reconnect. Did not have this problem with previous iOS. Apple, you have a quality assurance issue. Don't be like Microsoft where they send out pieces of junk with testing it.
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have a new IPhone5c and do not receive texts or calls sent from my daughter's phone; I'll call this phone 2. We did not have this problem with my old Envy Touch. Verizon is our provider. Can you troubleshoot? My other daughter has a new IPhone5c too. She receives calls and texts from sent from phone 2. Any tips for remedying this problem?
Thank you.Turn off iMessage in your phones settings. Apple devices can only use iMessage to other Apple devices.
Turning off iMessage will allow the messages to go as regular text messages. -
Hi,
A few songs from my old purchase is not available for download. It shows as purchased but I can't download it. Please help me resolve this problem, what do I need to do to enable download for all my purchased songs/movies etc.
- AvinashThe purchases are probably hidden:
http://support.apple.com/kb/ht4919 -
adobe keeps crashing, you can be on a web page reading and the browser opens the page in a new browser. I did not have this problem the older versions. What can I do to fix this problem.
See [[Firefox keeps opening many tabs or windows]]
-
New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect and immediately reroute to the login screeen).
Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?
-
How do I get rid of this message: Forbidden (403) CSRF verification failed. Request aborted?? I get this message when I try to connect an app to facebook. I did not have this problem before I downloaded Firefox 4. Do I need to remove your browser so my computer can work with the internet again?
HOW DO I FIX THIS???? I AM VERY FRUSTRATED WITH THIS PROBLEM!!!!Click here and follow the instructions to change the iTunes Store country.
(97125) -
I just added two external firewire drives and they keep going to sleep. I did not have this problem when using USB external drives. I have turned off "put disks to sleep" in power preference.
It is not clear if these are the same drives, just connected
differently, or different drives?
One thing that may be happening is that the drives firmware
itself is putting it to sleep when inactive. Many drives on
the market have ths feature and it is turned on by default
and require a drive utility from the manufacturer to disable it. -
I have the new i-pad and cannot get signal at work. My original i-pad did not have this problem
I have the new i-pad and cannot get a signal at work. My original i-pad did not have this problem. Any clue?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive. I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?
Since it will not boot then a hardware test can't be run. You could try FireWire Target Disk Mode and if it works then access from another Mac to run tests on the new drive. You could also try installing the OS X software from the host computer. If this does not work then professional help should be considered.
http://support.apple.com/kb/ht1661
http://osxdaily.com/2010/04/07/how-to-boot-a-mac-in-target-disk-mode/
http://www.macobserver.com/tmo/answers/how-to-use-target-disk-mode-to-boot-from- another-macs-hard-drive -
i updated my iphone to ios 6. now i can not charge my phone with any cable. it says charging do not support this accessory. what should i do now? can anyone help please!!!!!!!
I upgraded my iPhone 4 last evening to iOS 6, the upgrade completed and the device was usable. Then in the morning I went to the device to check E-mail, Voice Messages, Test Messages, etc... and the phone was dead. I tried plugging the device into a charger (for a couple of hours) - still dead. Plugged into computer with iTunes, device not recognized or discovered, and iPhone was still dead... Took the iPhone into an Apple Store and the Technician looked it over for any visible signs of defect/malfunction, then performed various tasks to breathe life into the phone - nothing... His suggestion, at this point, was to replace the phone. He speculated that the iOS upgrade possibly corrupted the iPhone's charging firmware, and that this device was now a BRICK. Keep in mind that the phone and it's charging abilities were perfectly fine prior to the iOS Upgrade. I hate to go through the replacement hassle and the cost ($159.00) when the iOS upgrade caused the problem. Any suggestions? Thanks!
-
Every time I try to send to the trash anything, appears de following: Finder is trying to make changes. Introduce your password to allow this action. Appears since 24h ago, never before had this problem, What´s the problem? I am using Mac OS lion
Can you post the permissions on your Home folder?
Open Terminal, copy and paste this command. Copy the output and post here. If you want to mask out your user name, then paste the output into a text editor and use Find/Replace to change it to something like "username" before pasting it in here.
ls -ale
Maybe you are looking for
-
I am living in the UAE and I would like to download an install a Japanese version of Lightroom 6.
I am living in the UAE and I would like to download an install a Japanese version of Lightroom 6. The only available version from the MENA store are English, Arabic, and French. And there is a region error when I change the region to Japan.
-
What's happening? Please help!
I have a ipod and ipod nano, at the beginning, I install the itunes by the dise with the ipod. It's work, and every things go well. 2nd time, after recovered my PC, install the itunes once again. It dosen't work! Whatever using the dise with the nano
-
SetDiagnosticDirectory(Diagnostics.java:54) [32-bit java on 64-bit machine]
On 64-bit LucidLynx Linux, If I run Oracle SQL Developer using 64 bit java, all is fine. If I use 32-bit java, it doesn't start up and I get this fatal error: java.lang.IllegalArgumentException: Cannot create <pwd>/?/.sqldeveloper/system1.5.5.59.69/o
-
Screen resolution does not change back after using a projector
Hi! My office uses several different models of macbooks, but there is a small problem with all the Airs. When I have been using them with a projector I have to change back the screen resolution manually (go to the system settings and change resolutio
-
Overiding super class method to an abstract method
public class Super public void doSomethingUseful() public abstract class Sub extends Super public abstract void doSomethingUseful(); What is the OO principle behind this? When do we need to override a super class method in subclass as an abstract?