Restiction selection of Hierarchies in BI 7.0

Hi guys ,
We are running a report in BI 7.0 (Bex Analyzer) , and we are selecting a hierarchy for display for profit center.
We have a quite a big number of hierarchies specified for profit cente . And when while choosing the required hierarchy the dropdown box shows (obviously) all hierarchies avaialble for profit center .But , since some country specific user are only intersted to view only some specified hoearchies , is their any way to restrict the avaialble heirarchies based on some crietria(ex: country) .
ex: a user related to australia will have only the list of hierarchies (ex :for profir centers) related to country,
and only those listed and available in the dropdown.
The main purpose is to restirct and also for the ease of viewing and selecting instead of going through a big list.
Regards,
Balaji Raj

Hi Sap Buddy ,
The solution given by you seems to be very helpful .
But, will that be possible as i am using Profit center , and i can make it as authorization relevant.
But, as per my requirement , a user will have to see only the hierarchies specific to him .
ex: A UK user will only be able to see the list of UK relevant hierarchies in the drop down and SWISS use can see only the
seiss related hierarchies .
Can you please give me more detaisl on the solution.
Regards,
Balaji Raj

Similar Messages

Hierarchical AdvancedDataGrid : selecting a specific index

I'm trying to select some items displayed in a hierarchical
AdvancedDataGrid. The underlying items in the dataProvider have
been replaced but using their id I want to select them back in the
AdvancedDataGrid.
1) The dataGrid is displayed and item id #123 is selected
2) The datatGrid's dataprovider is replaced
3) I want to select item #123 back in the dataGrid
To do this, I loop over the new dataProvider and I compare
the ID (#123) to find the new instance of the item that should be
selected. Then I do:
myDataGrid.selectedItem = newItem;
But it doesn't seem to work for a reason I don't understand.
I did a lot of tests using all the 'validate()', 'invalidate()' and
'refresh()' methods I could find but nothing worked.
But, if I use the index instead :
var newIndexToSelect:int =
newDataProvider.getItemIndex(newItem);
myDataGrid.selectedIndex = newIndexToSelect;
It does work! But only if the dataProvider is an
ArrayCollection! It doesn't work if it's a
HierarchicalCollectionView. And I need to use GroupingCollection to
create my dataProvider because I use the tree feature of the
AdvancedDataGrid.
When the dataProvider is a HierarchicalCollectionView, I have
no idea how to select the correct index in the Grid! Some of the
row in my tree-grid are not actual items but 'groups' so I can't
map the indices of my actual items in the Collection's source to
the indices in the datagrid!
Any help or tips on how to select a particular index in a
hierarchical AdvancedDataGrid ?
Thanks a lot!
JL

quote:
Originally posted by:
Sreenivas R
The index based selection for hierarchical ADG is tricky
because the index of an item can keep changing depending on the
open/closed nodes before it.
Exactly.
Here's a code example, where I populate the grid with some
items and later try to select item with ID "c" using its index
("test()" method is the entry point):

Creation of Hierarchie In BI.7

Hi BI Experts,
I searced the forums before posting but i did'nt get any answer as per my question .The data is coming from R/3 i need to create the hierarchie here the hierachie is not defined before . I know how to create hierarchie from flat file .Can any one suggest me how to create the hierarchie .
1, waht are the steps i need to create in ECC.
2,what are the stpes i need to create in BI.7
Regards
RK

Hi,
Regarding the steps for creation of hierarchy in BI 7:
1. Create a program in SE38
in this program use a data target which stores information of node & its higher levels.
In program
Declare the hierarchy structure
Declare the active table of data target
Declare int tables, structures & work areas
Get entire data from data target into internal table
Store the main node in one variable & read all levels into another table
append the levels into work area &
write these levels along with main node into a flat file in application server.
Once code is activated execute the program, you can have a selection screen for flat file name which will be generated in application server.
Once program is executed successfully flat file can be viewed using tcode AL11, in tmp directory.
2. Create an Infosource based on that main Infoobject of type flat file.
3. Once you create the Infosource you can select the data source as <Node Obj name>_HIER and then activate the InfoSource
4. Then create an Infopackage to laod that flat file into master data object i.e. the node object
5. Right clicking on Hierarchy of that Info object you can select Maintain hierarchies & you current hierarchy will be listed below.
Hope it helps.
Thanks,
Rashmi.

How to create hierarchies in Bex queries?

Hi All,
I am new to query designer tool,
can you please help me how to create hierarchies in Bex queries using query designer tool?
Thanks in advance...

Hi,
directly you can't create hierarchy at bex level.
First you have to maintain hierarchy data source at source or bw side, based on your needs.
Later you can load data to hierarchy, after that at bex level you can activate hierarchy options to related info object properties.
To maintain hierarchy we need to enable hierarchy options at related info object(RSD1, hierarchy tab, select with hierarchies) maintenance level.
For example: info object - 0GL_ACCOUNT and you need hierarchy structure on gl account.
For that we need to have hierarchy data source and will load data from ecc.
Later we can develop reports on gl account in hierarchy fashion.
On what object infoo bject you want create hierarchy report and have loaded hierarchy data?
Thanks

No Hierarchies for this InfoSource in the Source System

Hello All,
I want to find out how to get my hierarchy back in Bex (Query Designer). We just got a new BW system. The hierarchy was loading fine in the old system but unable to see it in the new system. I have done the following and still no luck:
Replicated the Datasource
Replicated the Source System
Maintain Hierarchies shows no hierarchies and when I click on create hierarchy (No values when you click on Hierarchy Name). Whereas I get hierarchy values in the old system.
In the Infopackage, click on Hierarchy Selection => Available Hierarchies from OLTP, I get "There are no Hierarchies for this InfoSource in the Source System".
Is there anything am missing? My suspicion is may be the Hierarchies need to be maintained in ECC first and then I should replicate again and then load the hierarchy.
Any suggestion would be appreciated.
Thanks,
Recca

Thanks Sai and RDS.
@ Sai: Yes, the Datasource is present in BW as 3.x version which I assume is ok. It is also present in active version in ECC in RSA6. There is nothing to load for the hierarchy because when you click on the InfoPackage the "Hierarchy Selection" and then "Available Hierarchies from OLTP", in other to refresh the list, I get "There are no Hierarchies for this InfoSource in the Source System".
@ RDS: Yes, the connection of BW to the ECC Source System is good....checked out ok. There is nothing to load for the hierarchy because when you click on "Hierarchy Selection" and then "Available Hierarchies from OLTP", in other to refresh the list, I get "There are no Hierarchies for this InfoSource in the Source System".
Besides RSA6 to check the datasource in active version in ECC, do you have a T-Code to check where these following Hierarchies are maintained in ECC? I need to compare it from the old system with the new system.
1. Fund
2. Fund Center
3. Commitment Item
Thanks,
Recca

Urgent: Add a custom line in Hierarchical ALV.

Hi
I am using the FM 'REUSE_ALV_HIERSEQ_LIST_DISPLAY' to display the header and item table details. However I would like to add a custom line below the item details of each section so that I can calculate the total (total of a particular field in the item table) and print it in this line....How do I do this....
Thanks..
Vijay

Hi,
See the attached report which is used to display Hierarchial display for header and item;
REPORT zwmr_pick_status_report NO STANDARD PAGE HEADING
 MESSAGE-ID zw.
Type Pools
TYPE-POOLS: icon, slis.
Tables
TABLES: tvst,
 likp,
 t30b,
 vekp,
 zhu_to_link,
 zpallettr,
 vttk,
 zvantr.
Types
TYPES:
BEGIN OF ty_data,
 lgtor LIKE likp-lgtor, " door
 vbeln LIKE likp-vbeln, " delivery
 wbstk LIKE vbuk-wbstk, " Goods movement status
 kostk LIKE vbuk-kostk, " Picking status
 posnr LIKE lips-posnr, " item
 route LIKE likp-route, " route
 wadat LIKE likp-wadat, " goods issue date
 lvsta LIKE vbup-lvsta, " warehouse status
 packvorschr LIKE vekp-packvorschr, " pack mnemonic
 exidv LIKE vekp-exidv, " handling unit
 zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
 zdep_point LIKE zpallettr-zdep_point, "Departur Point "Jvdm01
 zcount_check LIKE zpallettr-zcount_check," count check flag
 zvan_no(10), "like zvantr-zvan_no, " van no
 zvan_print LIKE zvantr-zvan_print, " van manifest print
 tknum LIKE vttk-tknum, " Shipment No "ANV 11523
 zeod_print LIKE zvantr-zeod_print, " eod manifest print
 zzpackclass LIKE vekp-zzpackclass, " package class
 zzti LIKE vekp-zzti, " T.I. value
 vstel LIKE likp-vstel, "Shipping point RM050906
 anzpk TYPE znopack, "No of packages in dlv MB01+
END OF ty_data.
TYPES:BEGIN OF x_likp ,
 vbeln LIKE likp-vbeln,
 vstel LIKE likp-vstel,
 lgtor LIKE likp-lgtor,
 zzroute2lgtor LIKE likp-zzroute2lgtor,
 route LIKE likp-route,
 wadat LIKE likp-wadat,
 zz2route LIKE likp-zz2route,
 zzexproute LIKE likp-zzexproute,
 zzroute2 LIKE likp-zzroute2,
 anzpk LIKE likp-anzpk,
 END OF x_likp.
TYPES: BEGIN OF x_vbuk,
 vbeln TYPE vbuk-vbeln,
 wbstk TYPE vbuk-wbstk, " Goods movement status
 kostk TYPE vbuk-kostk, " Picking status
 END OF x_vbuk.
TYPES: BEGIN OF x_lips,
 vbeln TYPE lips-vbeln, " delivery
 posnr TYPE lips-posnr, " item
 pstyv TYPE lips-pstyv,
 matnr TYPE lips-matnr,
 charg TYPE lips-charg,
 END OF x_lips.
TYPES: BEGIN OF x_vbup,
 vbeln TYPE vbup-vbeln, " delivery
 posnr TYPE vbup-posnr, " item
 lvsta TYPE vbup-lvsta, " warehouse status
 END OF x_vbup.
TYPES: BEGIN OF x_vepo,
 venum TYPE vepo-venum, "Internal Handling Unit
Number
 vepos TYPE vepo-vepos, "Handling Unit Item
 vbeln TYPE vepo-vbeln, " delivery
 posnr TYPE vepo-posnr, " item
 exidv TYPE vekp-exidv,
 END OF x_vepo.
TYPES: BEGIN OF x_vepo1,
 venum TYPE vekp-venum, "Internal Handling Unit
Number
 exidv TYPE vekp-exidv,
 END OF x_vepo1.
Start of changes by ANV SR#11523
TYPES: BEGIN OF x_vttp,
 tknum TYPE tknum, " Shipment No
 tpnum TYPE tpnum, " Item No
 vbeln TYPE vbup-vbeln, " delivery
 laufk LIKE vttk-laufk, " leg indicator MB01+
 END OF x_vttp.
End of changes by ANV SR#11523
Data
RANGES: r_del FOR likp-vbeln,
 r_lgtor FOR likp-lgtor.
RANGES: r_vanno FOR zvantr-zvan_no,
 r_palno FOR zpallettr-zpallet_no.
DATA: BEGIN OF number_range OCCURS 0,
 mark(1),
 id(3),
 num(10) TYPE n,
 desc LIKE zpalletmd-zdesc,
 END OF number_range.
DATA: t_disp_tab TYPE STANDARD TABLE OF zpickdisp,
 t_data_tab TYPE ty_data OCCURS 0 WITH HEADER LINE,
 it_likp TYPE x_likp OCCURS 0 WITH HEADER LINE, "SUM
 it_vbuk TYPE x_vbuk OCCURS 0 WITH HEADER LINE, "SUM
 it_lips TYPE x_lips OCCURS 0 WITH HEADER LINE, "SUM
 it_vbup TYPE x_vbup OCCURS 0 WITH HEADER LINE, "SUM
 it_vepo TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
 it_vepo2 TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
*{ INSERT UKMK900355 3
 t_vepo_low TYPE x_vepo OCCURS 0 WITH HEADER LINE, " AS01
*} INSERT
 it_vepo1 TYPE x_vepo1 OCCURS 0 WITH HEADER LINE, "SUM
 it_vttp TYPE x_vttp OCCURS 0 WITH HEADER LINE,
t_disp_head TYPE STANDARD TABLE OF zpickhead.
DATA wa_item_tab TYPE zpickdisp OCCURS 0 WITH HEADER LINE.
"ANV SR#11113
DATA: w_numrnge LIKE number_range,
 w_number(10) TYPE n.
DATA: t_likp LIKE likp OCCURS 0 WITH HEADER LINE,
 t_lips LIKE lips OCCURS 0 WITH HEADER LINE,
 t_vbuk LIKE vbuk OCCURS 0 WITH HEADER LINE,
 t_vbup LIKE vbup OCCURS 0 WITH HEADER LINE,
 t_vepo LIKE vepo OCCURS 0 WITH HEADER LINE,
 t_vekp LIKE vekp OCCURS 0 WITH HEADER LINE,
 t_vantr LIKE zvantr OCCURS 0 WITH HEADER LINE,
 t_pallettr LIKE zpallettr OCCURS 0 WITH HEADER LINE,
 w_likp like likp,
 w_lips LIKE lips,
 w_vbuk LIKE vbuk,
 w_vbup LIKE vbup,
 w_vepo LIKE vepo,
 w_vekp LIKE vekp,
 w_vepo TYPE x_vepo1,
 w_vbup TYPE x_vbup,
 w_vttp TYPE x_vttp, " ANV SR#11523
 w_lips TYPE x_lips,
 w_vbuk TYPE x_vbuk,
 w_likp TYPE x_likp, "MB01-+
 w_tplst LIKE vttk-tplst. "MB01+
DATA: s_variant LIKE disvariant, "MB01+
 def_variant LIKE disvariant.
ALV DATA *****
DATA:
 g_grid TYPE REF TO cl_gui_alv_grid,
 g_sort TYPE slis_t_sortinfo_alv,
 g_custom_container TYPE REF TO cl_gui_custom_container,
 g_layout TYPE slis_layout_alv,
 gt_fieldcat TYPE slis_t_fieldcat_alv,
 t_fldcat LIKE LINE OF gt_fieldcat,
 g_keyinfo TYPE slis_keyinfo_alv,
 gt_events TYPE slis_t_event,
 gs_event TYPE slis_alv_event,
 w_sy_repid LIKE sy-repid.
DATA: BEGIN OF seltab OCCURS 0.
 INCLUDE STRUCTURE rsparams.
DATA: END OF seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
CONTROLS: tc_tabcon TYPE TABLEVIEW USING SCREEN 0100.
LINES OF TABLECONTROL 'TC_TABCON'
DATA: g_tc_tabcon_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
Constants
CONSTANTS: c_data_class LIKE klah-class VALUE 'DG_DATA',
 c_mat_class LIKE rmclf-klart VALUE '001',
 c_pack LIKE lips-mtart VALUE 'VERP',
 c_a(1) VALUE 'A',
 c_b(1) VALUE 'B',
 c_c(1) VALUE 'C',
 c_yes(1) VALUE 'X',
 c_no(1) VALUE ' '.
Selection screen
standard report select options block
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-002.
SELECT-OPTIONS:
s_wadat FOR likp-wadat NO-EXTENSION OBLIGATORY. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
SELECT-OPTIONS: "TR01+
p_vstel FOR tvst-vstel. " Shipping Point "TR01+
SELECT-OPTIONS:
s_lfart FOR likp-lfart, " Delivery type
s_lgtor FOR t30b-lgtor, " Door selection
s_exidv FOR vekp-exidv, " Handling Unit
s_vbeln FOR likp-vbeln, " Delivery "MB01-+
s_lfdat FOR likp-lfdat. " Delivery date
PARAMETERS:
p_exdata AS CHECKBOX. " Show extra columns flag
SELECTION-SCREEN END OF BLOCK a.
van/pallet specific select options block
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_palno FOR zpallettr-zpallet_no, " no-extension,
s_vanno FOR zvantr-zvan_no. " no-extension.
SELECT-OPTIONS:
s_deppnt FOR zpallettr-zdep_point, "Jvdm01
s_tplst FOR vttk-tplst. "MB01
SELECTION-SCREEN END OF BLOCK b.
MB01 - START - Display variant
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-019.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK c.
MB01 - END
Value Request Events
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-high = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-high = w_number.
MB01 - START - display variant
F4-Help for variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
MB01 - END
At Selection Screen
AT SELECTION-SCREEN.
PERFORM validate_selections.
Initialization
INITIALIZATION.
MB01 - START INSERT
1. Transportation planning point
Import transportation planning point from user parameters and
populate
select option.
GET PARAMETER ID 'TDP' FIELD w_tplst.
MOVE: 'I' TO s_tplst-sign,
 'EQ' TO s_tplst-option,
 w_tplst TO s_tplst-low.
APPEND s_tplst.
2. Display variant
CLEAR s_variant.
s_variant-report = sy-repid.
Get default variant
s_def_variante = s_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
 EXPORTING
 i_save = 'A'
 CHANGING
 cs_variant = s_variant
 EXCEPTIONS
 not_found = 2.
IF sy-subrc = 0.
 p_vari = s_variant-variant.
ENDIF.
MB01 - END INSERT
Start of selection
START-OF-SELECTION.
clear all data tables
CLEAR: t_likp,
 it_likp,
 t_lips,
 t_vbuk,
 t_vbup,
 t_vepo,
 t_vantr,
 t_pallettr,
 w_likp,
 w_lips,
 w_vbuk,
 w_vbup,
 w_vepo,
 w_vekp.
REFRESH: t_likp,
 it_likp,
 t_lips,
 t_vbuk,
 t_vbup,
 t_vepo,
 t_vantr,
 t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
IF NOT s_vanno IS INITIAL
OR NOT s_palno IS INITIAL
OR NOT s_deppnt IS INITIAL. "Jvdm01
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
 PERFORM select_data_up.
ELSE.
otherwise the data can be selected from the delivery downwards
 PERFORM select_data_down.
ENDIF.
End of selection
END-OF-SELECTION.
call hierarchical ALV display function module
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
 EXPORTING
 i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
 i_callback_pf_status_set = 'SET_STATUS'
 i_callback_user_command =
 'USER_COMMAND' "custom gui status form
 is_layout = g_layout "user command form
 it_fieldcat = gt_fieldcat
 it_sort = g_sort
 i_save = 'X' "MB01+
 is_variant = s_variant
 it_events = gt_events
 i_tabname_header = 't_disp_head'
 i_tabname_item = 't_disp_tab'
 i_structure_name_header = 'ZPICKHEAD'
 i_structure_name_item = 'ZPICKDISP'
 is_keyinfo = g_keyinfo
 TABLES
 t_outtab_header = t_disp_head
 t_outtab_item = t_disp_tab.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
 FORMS
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
INCLUDE zwmr_pick_o01.
INCLUDE zwmr_pick_status_reporto01 .
INCLUDE zwmr_pick_i01.
INCLUDE zwmr_pick_status_reporti01 .
INCLUDE zwmr_pick_f01.
INCLUDE zwmr_pick_status_reportf01 .
*& Form select_pal_nos
 select pallet numbers for search help
FORM select_pal_nos.
DATA: BEGIN OF t_palno OCCURS 0,
 zpallet_no LIKE zpallettr-zpallet_no,
 END OF t_palno.
select all available pallet numbers
SELECT DISTINCT zpallet_no FROM zpallettr
 INTO CORRESPONDING FIELDS OF TABLE t_palno.
LOOP AT t_palno.
get pallet id
 SELECT SINGLE zpallet_id FROM zpallettr
 INTO number_range-id
 WHERE zpallet_no = t_palno-zpallet_no.
get pallet description
 SELECT SINGLE zdesc FROM zpalletmd
 INTO number_range-desc
 WHERE zpallet_id = number_range-id.
 number_range-num = t_palno-zpallet_no.
append to search help table
 APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_pal_nos
*& Form select_van_nos
 select van numbers for search help
FORM select_van_nos.
DATA: BEGIN OF t_vanno OCCURS 0,
 zvan_no LIKE zvantr-zvan_no,
 END OF t_vanno.
select available van numbers
SELECT DISTINCT zvan_no FROM zvantr
 INTO CORRESPONDING FIELDS OF TABLE t_vanno.
LOOP AT t_vanno.
select van id
 SELECT SINGLE zvan_id FROM zvantr
 INTO number_range-id
 WHERE zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
 SELECT SINGLE zdesc FROM zpalletmd
 INTO number_range-desc
 WHERE zpallet_id = number_range-id.
 number_range-num = t_vanno-zvan_no.
append to search help table
 APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_van_nos
*& Form select_data_down
 select data if selecting from delivery down
FORM select_data_down.
select all deliveries from LIKP that fulfill selection criteria
Start SU01 optmization changes
SELECT vbeln vstel lgtor route wadat "RM050906
SELECT vbeln vstel lgtor route wadat
 zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
 FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp"MB01-+
 WHERE vbeln IN s_vbeln
 AND vstel IN p_vstel
 AND lfart IN s_lfart
 AND wadat IN s_wadat
 AND lfdat IN s_lfdat "MB01+
 AND
 ( lgtor IN s_lgtor OR zzroute2lgtor IN s_lgtor ) ."MB01+
IF sy-subrc NE 0.
no data found
 MESSAGE i007.
 EXIT.
ENDIF.
IF NOT t_likp[] IS INITIAL. "SUM
IF NOT it_likp[] IS INITIAL.
 SORT it_likp BY vbeln. "SUM
select sales document headers from VBUK
 SELECT vbeln wbstk kostk
 FROM vbuk INTO TABLE it_vbuk
 FOR ALL ENTRIES IN it_likp "SUM
 WHERE vbeln EQ it_likp-vbeln. "SUM
 SORT it_vbuk BY vbeln.
select all relevant delivery items from LIPS
 SELECT vbeln posnr pstyv matnr charg
 FROM lips INTO TABLE it_lips
 FOR ALL ENTRIES IN it_likp
 WHERE vbeln EQ it_likp-vbeln
 AND pckpf NE 'B' "cannot be packed "AS05
 AND pstyv NE 'ZPAC' "AS05
 AND pstyv NE 'ZGDP' "TR02+ "AS05
 AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
select all sales document line items from VBUP
 SORT it_lips BY vbeln posnr. "SUM
 SELECT vbeln posnr lvsta
 FROM vbup INTO TABLE it_vbup
 FOR ALL ENTRIES IN it_lips
 WHERE vbeln EQ it_lips-vbeln
 AND posnr = it_lips-posnr.
 SORT it_vbup BY vbeln posnr.
select corresponding handling unit ID's (venum)
TR03 Replace
start
 select * from vepo appending corresponding fields of table t_vepo
 for all entries in t_lips
 where vbeln = t_lips-vbeln
 and posnr = t_lips-posnr
 and matnr = t_lips-matnr
 and charg = t_lips-charg.
 SELECT vepoVENUM vepoVEPOS vepovbeln vepoposnr
 FROM vepo as vepo
 INNER JOIN vekp as vekp ON vepovenum = vekpvenum
 APPENDING corresponding fields of table it_vepo
 FOR ALL ENTRIES IN it_lips
 WHERE vepo~vbeln = it_lips-vbeln
 AND vepo~posnr = it_lips-posnr
 AND vepo~matnr = it_lips-matnr
 AND vepo~charg = it_lips-charg
 AND vekp~exidv IN s_exidv.
 SELECT venum vepos vbeln posnr
 FROM vepo INTO TABLE it_vepo2
 FOR ALL ENTRIES IN it_lips
 WHERE vbeln = it_lips-vbeln
 AND posnr = it_lips-posnr
 AND matnr = it_lips-matnr
 AND charg = it_lips-charg.
 SORT it_vepo2 BY venum vepos.
*{ INSERT UKMK900355 1
Ice-multis: replace lower-level HUs with highest level " AS01
 PERFORM replace_highest_hu. " AS01
*} INSERT
Start of changes by ANV SR#11523
MB01 - extract shipment header as well to populate leg indicator
Therefore, join vttp with vttk
Limit as well by transportation planning point
 SELECT vttptknum vttptpnum vttpvbeln vttklaufk
 FROM vttp INNER JOIN vttk
 ON vttptknum = vttktknum
 INTO TABLE it_vttp
 FOR ALL ENTRIES IN it_lips
 WHERE vttp~vbeln = it_lips-vbeln
 AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
 IF NOT it_vepo2[] IS INITIAL.
 SELECT venum exidv
 FROM vekp INTO TABLE it_vepo1
 FOR ALL ENTRIES IN it_vepo2
 WHERE venum = it_vepo2-venum
 AND exidv IN s_exidv.
 ENDIF.
 SORT it_vepo1 BY venum.
 CLEAR: w_vepo, it_vepo.
 LOOP AT it_vepo1.
 READ TABLE it_vepo2 WITH KEY venum = it_vepo1-venum.
 IF sy-subrc = 0.
 it_vepo2-exidv = it_vepo1-exidv.
 MODIFY it_vepo2 TRANSPORTING exidv
 WHERE venum = it_vepo1-venum .
 ENDIF.
 ENDLOOP.
 DELETE it_vepo2 WHERE exidv IS initial.
 it_vepo[] = it_vepo2[].
TR03 Replace end
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_down
*& Form select_data_up
 select data if selecting from van/pallet up
FORM select_data_up.
IF NOT s_vanno IS INITIAL.
if van then select van numbers and hence pallet numbers
 SELECT * FROM zvantr INTO TABLE t_vantr
 WHERE zvan_no IN s_vanno.
 and vstel eq p_vstel."TR01-
 IF NOT t_vantr[] IS INITIAL.
 SORT t_vantr BY zvan_id zvan_no vstel zpallet_no. "SUM
 SELECT * FROM zpallettr INTO TABLE t_pallettr
 FOR ALL ENTRIES IN t_vantr
 WHERE zpallet_no EQ t_vantr-zpallet_no
 AND zdep_point IN s_deppnt. "Jvdm01
 and vstel eq p_vstel."TR01-
 ENDIF.
ELSE.
otherwise can get pallet numbers directly
 SELECT * FROM zpallettr INTO TABLE t_pallettr
 WHERE zpallet_no IN s_palno
 AND zdep_point IN s_deppnt. "Jvdm01
 and vstel eq p_vstel."TR01-
ENDIF.
IF NOT t_pallettr[] IS INITIAL.
from the pallet nos. we can select the handling units
 SORT t_pallettr BY zpallet_id zpallet_no vstel exidv. "SUM
 SELECT * FROM vekp INTO TABLE t_vekp
 FOR ALL ENTRIES IN t_pallettr
 WHERE exidv EQ t_pallettr-exidv
 AND exidv NE space
 AND exidv IN s_exidv "TR03+
 AND ( exida = 'E' "TR01+
 OR exida = 'F' ). "TR01+
ENDIF.
SORT t_vekp BY venum. "SUM
IF NOT t_vekp[] IS INITIAL.
build vbeln range from t_vekp.
 LOOP AT t_vekp.
 r_del-sign = 'I'.
 r_del-option = 'EQ'.
 r_del-low = t_vekp-vpobjkey.
 APPEND r_del.
 ENDLOOP.
select all deliveries from LIKP that correspond to HU's
 SELECT * FROM likp INTO TABLE t_likp
 WHERE vbeln IN r_del
 AND wadat IN s_wadat
 AND lfart IN s_lfart.
ENDIF.
MB01- START
 SELECT vbeln lgtor route wadat
 FROM likp INTO TABLE it_likp
 WHERE vbeln IN r_del
 AND wadat IN s_wadat
 AND lfart IN s_lfart.
 SELECT vbeln vstel lgtor route wadat
 zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
 FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp
 WHERE vbeln IN r_del
 AND lfart IN s_lfart
 AND wadat IN s_wadat "MB01-+
 AND lfdat IN s_lfdat. "MB01+
MB01- END
ENDIF.
IF NOT it_likp[] IS INITIAL.
 SORT it_likp BY vbeln . "SUM
select sales document headers from VBUK
 SELECT * FROM vbuk INTO TABLE t_vbuk
 FOR ALL ENTRIES IN t_likp
 WHERE vbeln EQ t_likp-vbeln.
 SELECT vbeln wbstk kostk
 FROM vbuk INTO TABLE it_vbuk
 FOR ALL ENTRIES IN it_likp
 WHERE vbeln EQ it_likp-vbeln.
 SORT it_vbuk BY vbeln. "SUM
select all relevant delivery items from LIPS
 SELECT * FROM lips INTO TABLE t_lips
 FOR ALL ENTRIES IN t_likp
 WHERE vbeln EQ t_likp-vbeln
 AND pstyv NE 'ZPAC'
 AND pstyv NE 'ZGDP' "TR02+
 AND lfimg GT 0. "TR01+
 SELECT vbeln posnr pstyv matnr charg
 FROM lips INTO TABLE it_lips
 FOR ALL ENTRIES IN it_likp
 WHERE vbeln EQ it_likp-vbeln
 AND pckpf NE 'B' "cannot be packed "AS05
 AND pstyv NE 'ZPAC' "AS05
 AND pstyv NE 'ZGDP' "TR02+ "AS05
 AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
 SORT it_lips BY vbeln posnr. "SUM
select all sales document line items from VBUP
 SELECT * FROM vbup INTO TABLE t_vbup
 FOR ALL ENTRIES IN t_lips
 WHERE vbeln EQ t_lips-vbeln
 AND posnr = t_lips-posnr.
Start of changes by ANV SR#11523
MB01 - START
join vttp with vttk to obtain leg indicator
 SELECT tknum tpnum vbeln
 FROM vttp INTO TABLE it_vttp
 FOR ALL ENTRIES IN it_lips
 WHERE vbeln = it_lips-vbeln.
 SELECT vttptknum vttptpnum vttpvbeln vttklaufk
 FROM vttp INNER JOIN vttk
 ON vttptknum = vttktknum
 INTO TABLE it_vttp
 FOR ALL ENTRIES IN it_lips
 WHERE vttp~vbeln = it_lips-vbeln
 AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
 SELECT vbeln posnr lvsta
 FROM vbup INTO TABLE it_vbup
 FOR ALL ENTRIES IN it_lips
 WHERE vbeln EQ it_lips-vbeln
 AND posnr = it_lips-posnr.
 SORT t_vbup BY vbeln posnr. "SUM
select corresponding handling unit ID's (venum)
 SELECT * FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE t_vepo
 FOR ALL ENTRIES IN t_lips
 WHERE vbeln = t_lips-vbeln
 AND posnr = t_lips-posnr
 AND matnr = t_lips-matnr
 AND charg = t_lips-charg.
 SELECT venum vepos vbeln posnr
 FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE it_vepo
 FOR ALL ENTRIES IN it_lips
 WHERE vbeln = it_lips-vbeln
 AND posnr = it_lips-posnr
 AND matnr = it_lips-matnr
 AND charg = it_lips-charg.
*{ INSERT UKMK900355 1
 it_vepo2[] = it_vepo[]. " DS01
 PERFORM replace_highest_hu. " DS01
 it_vepo[] = it_vepo2[]. " DS01
*} INSERT
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_up
*& Form move_to_table
 move data to processing table
FORM move_to_table.
LOOP AT it_vepo.
 CLEAR t_data_tab.
delivery lines.
 CLEAR w_lips.
 READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
 posnr = it_vepo-posnr
 INTO w_lips BINARY SEARCH. "SUM
 MOVE-CORRESPONDING w_lips TO t_data_tab.
sales document line items
 CLEAR w_vbup.
 READ TABLE it_vbup WITH KEY vbeln = it_vepo-vbeln
 posnr = it_vepo-posnr
 INTO w_vbup BINARY SEARCH. "SUM
if w_vbup-kosta = space. "TR01-
 not relevant for picking
 delete t_vepo. "TR01-
 continue. "TR01-
else. "TR01-
 MOVE-CORRESPONDING w_vbup TO t_data_tab.
endif. "TR01-
sales doc header
 CLEAR w_vbuk.
 READ TABLE it_vbuk WITH KEY vbeln = it_vepo-vbeln
 INTO w_vbuk BINARY SEARCH. "SUM
 MOVE-CORRESPONDING w_vbuk TO t_data_tab.
delivery header
 CLEAR w_likp.
 READ TABLE it_likp WITH KEY vbeln = it_vepo-vbeln
 INTO w_likp BINARY SEARCH. "SUM
 MOVE-CORRESPONDING w_likp TO t_data_tab.
MB01 - START
DATA: w_routetype TYPE i. "0=non-global,1=1st route,2=2nd
route,3=both
At this point move DOOR2 if it falls within the global route scenario
and the door2 is satisfies the selection criteria for door
1. Does delivery fall within global route scenario
 CLEAR w_routetype.
 IF w_likp-zz2route = 'Y' .
1.a. First route - does door1 satisfy the selection criteria
 IF w_likp-lgtor IN s_lgtor.
 w_routetype = 1.
 MOVE w_likp-zzexproute TO t_data_tab-route.
1.b. Second route - does door2 satisfy the selection criteria
 ELSEIF w_likp-zzroute2lgtor IN s_lgtor.
here we need to move door2 to lgtor
 w_routetype = 2.
 MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
 MOVE w_likp-zzroute2 TO t_data_tab-route.
 ENDIF.
If both routes satsify the criteria, append for 2nd leg ***REVISIT!
 IF w_likp-lgtor IN s_lgtor AND w_likp-zzroute2lgtor IN s_lgtor.
 w_routetype = 3.
 ENDIF.
 ENDIF.
MB01 - END
Start of changes by ANV SR#11523
MB01 - If the delivery falls within the global route scenario... need
to select either preliminary shipment leg OR subsequent leg
when laufk= 1 (prelim) and linked to route1, if laufk = 2 (subseq) &
linked to route2
Shipment Number
 SORT it_vttp BY vbeln laufk.
 CLEAR w_vttp.
 CASE w_routetype.
 WHEN 0.
 READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
 INTO w_vttp BINARY SEARCH.
 WHEN 1.
 READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
 laufk = '1'
 INTO w_vttp BINARY SEARCH.
 WHEN 2.
 READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
 laufk = '3'
 INTO w_vttp BINARY SEARCH.
 WHEN 3. "REVISIT
 ENDCASE.
 MOVE w_vttp-tknum TO t_data_tab-tknum.
MB01 - END
End of changes by ANV SR#11523
select handling unit info using vepo entry
 CLEAR w_vekp.
 IF t_vekp[] IS INITIAL.
 SELECT SINGLE * FROM vekp INTO w_vekp
 WHERE venum = it_vepo-venum.
 ELSE.
 READ TABLE t_vekp WITH KEY venum = it_vepo-venum
 INTO w_vekp BINARY SEARCH. "SUM
 IF sy-subrc NE 0.
 SELECT SINGLE * FROM vekp INTO w_vekp
 WHERE venum = t_vepo-venum.
 ENDIF.
 ENDIF.
 MOVE-CORRESPONDING w_vekp TO t_data_tab.
*{ INSERT UKMK900355 2
WM status for HU "AS03
 SELECT SINGLE * FROM zhu_to_link WHERE lgnum EQ w_vekp-lgnum"AS03
 AND exidv EQ w_vekp-exidv."AS03
 IF sy-subrc EQ 0. "AS03
 IF zhu_to_link-zpick_comp EQ space. "AS03
 t_data_tab-lvsta = 'B'. "AS03
 ELSE. "AS03
 t_data_tab-lvsta = 'C'. "AS03
 ENDIF. "AS03
 ENDIF. "AS03
*} INSERT
select pallet / van load information "Jvdm01-
 SELECT SINGLE zpallet_no zcount_check FROM zpallettr "Jvdm01-
 INTO (t_data_tab-zpallet_no, "Jvdm01-
 t_data_tab-zcount_check) "Jvdm01-
 WHERE exidv EQ w_vekp-exidv. "Jvdm01-
 PERFORM read_pallet. "MB01+
 SELECT SINGLE zpallet_no zcount_check zdep_point "Jvdm01+
 FROM zpallettr "Jvdm01+
 INTO (t_data_tab-zpallet_no, "Jvdm01+
 t_data_tab-zcount_check, "Jvdm01+
 t_data_tab-zdep_point) "Jvdm01+
 WHERE exidv EQ w_vekp-exidv. "Jvdm01+
 WHERE exidv EQ w_vekp-exidv "MB

Single Element in Multiple hierarchies

Hi ,
Is it possible to have single element in multiple hierarchies in OBI EE .Lets say I have an prebuilt hierarchies
Programs-->Campaigns and Offer--> Treatment?
Can i create one more hierarchy Programs--> Campaigns --> Offer.It doesnot allow me to drag the offer_name to any other hierarchy since offer--> treatment hierarchy is present.
Any pointers?
Thanks & Regards,
Gaurav

Hi YSS,
Thanks for yopur reply.
The example which u sent to me is different to the requirement which iam looking for.Here is the more detailed abt my scenario.I have a cost element and under this cost element i have for example 4 hierarchies.under each hierarchy there are several sub nodes.in my query i want to disply like this.
Hierarchy 1       Kf1 Kf2 Kf3
    sub node 1
      sub node 2
       Result
Hierarchy 2
    sub node 1
      sub nde 2
       Result
I hope now its more clear.please let me know if its possible and also can u explain how we can create Hierarchy variables to enable end user to select required hierarchies while running the query.
Thanks,
Vaka

Selecting Hierarchy at runtime

Hi,
I have 2 hierarchies (HIER1, HIER2) created on InfoObject (IO1). In the query we had used this InfoObject in the free characteristics.
Our requirement is when the user drill down on this InfoObject, User should able to see the data without the hierarchy. But, when he right click on the InfoObject & activate the hierarchy, he should have the option of selecting the hierarchies (HIER1 or HIER2).
Can anyone please help me in resolving this.
Regards
Ramesh Ganji


Hi 
I think it should be simple to achieve this. 
1, In the Query Designer, Open your Query. Right click on your IO1 and select Restrict 
2. Restrict it to both the Hierarchies HIER1 and HIER2 and select OK 
3. Right click on your IO1 and select Properties 
4. In the section Display Hierarchy, do not tick the checkbox Active. This will ensure that the Hierarchy is not Active by default when somebody executes the report 
5. But your other requirement of activating the hierarchy and selecting it on execution should be fulfilled 
 
Hope it helps. 
Cheers Abhijit
Please assign Reward Points if I deserve it in your opinion

Heirarchy selection adding a + to heriarchy nodes and report

Does anyone have a solution for this problem which has suddenly started appearing in our variable selection for hierarchies.
When I run a query I get a selection/variable screen for fund centre which allows me to pick from the hierarchy for funds centre for my particular client (client been different source clients). The variable is filled from a user exit for authorizations for user and hierarchy related to client but this been like this for 3 years without this problem.
When I choose a hierarchy node from the list (TK for example) it is replaced with +TK in the selection box so it is adding a + for some reason?? Even thought the hierarchy seems fine that is loaded in to BW.
I try and execute and I get a message saying:-
u2018Input data for +TK (text\node) has an invalid formatu2019
When I overwrite the +TK with TK directly in the selection field for fund centre I get the result as normal from the report.
Any ideas what has caused the problem???

This is a bug, Please apply the note below,
1522108 Parcer error for hierarchy value with special chara

OBIEE 11g Unable to browse multiple value hierarchy for analysis.

Hi All,
We are using OBIEE 11g Value Hierarchy feature to display GL Segment Hierarchies.
-     We have set the hierarchies to be Ragged and Skipped Levels in the RPD Business Model.
-     We have dragged the hierarchies from Business Model to Presentation Layer.
-     When selecting the hierarchies during Analysis, the first hierarchy that is browsed appears correctly. The next hierarchy when browsed just hangs.
For example:
Step 1: Browse Hierarchy1 (Block). The values show correctly.
Step 2: Browse Hierarchy2 (Account). The hierarchy does not open with a blinking circle remaining forever.
Alternatively;
If we selected, Hierarchy 2(Account) first, the hierarchy shows correctly, but when selecting Hierarchy1 (Block) a blinking circle appears and remains for ever without opening the hierarchy.
The nqquery.log shows correct result. My suspicion is that the issue is on the front end presentation services/javascript side.
Is there any additional setup/configuration required to open multiple value hierarchies during analysis.
Thanks and Regards,
Sasi

I have a pretty good guess at the hanging problem, unforntunitly i have no solutions yet.
I having same type of issue, hangs when building filters on for 2nd or 3rd dim table.. I can see obiee fireing off the query to populate the dropdown by running
select distinct on and joining to the fact table and dimensions that the users usually have selecte prior to start creatinng the filters.
It is sort of like doing a intra dimension filter.. Sounds good but if user does not cut way down on number of fact rows by the time 2nd filtered column is selected the generated query to populate the drop down can run and run.
OBI SE Once and discoverer dd not do this, at least not out of the box.

Chart and text items are not synchron

hi all,
i am a newbie in apex 4.0.
i have two regions. the first shows a chart, based on pl/sql-code. second shows text items for possible filter an the current statement of the chart.
when user clicks on a bar in the chart then
1. i set the the first text item as filter,
2. a pl/sql-code runs, build a sql statement, assign the sql statement string to the second text item and
3. returns the statement for the chart.
it works fine. the chart refresh. and the data i can see are correct.
but the text items in the other region doesn't refresh.
when i press "refresh"-button at browser level everything is fine. chart and text items fits together.
what can I do to refresh all regions when the chart changes the sql-statment / User clicks?
Is there any way to read out the current statement of a chart?
thx in advance
jogi
Edited by: Jogi on 09.05.2011 12:31

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

Approved and published items are not shown in the catalog search

Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
Bernd

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

Hierarchy on HANA Calculation View with Optional Input Parameters Fails

Hi,
Has anyone succeeded in building a hierarchy on top of a calculation view with optional input parameters, where an input parameter is not filled?
The original requirement came from the wish to create a parent child hierarchy on a calculation view that was copied into the customer space from a HANA Live Financial Statement query view, but I have found the following when creating a simple level hierarchy on a calculation view that consumes one table. The Calculation View has one Input Parameter where the 'mandatory' box is unchecked.
Calculation view reads ECC table FAGLFLEXT
Simple level based hierarchy on fields PRCTR, RACCT and SEGMENT
Input parameter is used as a filter for PRCTR with logic ("EMPTY" = '$$P_PROFITCTR$$' or "PRCTR" = '$$P_PROFITCTR$$')
When I run the view I see the following behaviour in HANA Studio and Analysis for Excel
Before building the hierarchy I could run the view with or without the Input Parameter
After building the hierarchy I can run the view with the Input Parameter filled, but it fails when the Input Parameter is not filled.
Error message is "error: search table error: [2426] missing placeholder; missing value for mandatory parameter P_PROFITCTR"
P_PROFITCTR is not a mandatory parameter, but the selection for the hierarchy view thinks it should be. I don't find any notes around this issue, so I don't think it's version related, however the version I have used for this test is 1.00.70.
It's a shame we can't currently build the hierarchy as the parent child relationship is provided in HANA Live view NewGLFinancialStatementQuery.
Thanks,
Ken

Hi Ken,
We have been facing similar issue. We have even tried to set default value and as optional parameter. View still fails to create hierarchy (we are not using HANA live). As mentioned on page 97 of HANA modelling guide input parameter is mandatory from engine point of view. Hierarchy is generated as column view during the initial activation of calculation view and therefore expect a value by caller.
This seems to be a product error. Some one from HANA development team should explain this issue in detail. I would expect someone like Thomas Jung reply to us.
At the moment, we cant use input parameter for date prompt which gives us calendar popup feature for date selection. Hierarchies just don't work with input parameter. We are missing something.
Regards
Angad

Hierarchy not listed in the infopackage

Hi,
I found OSS note 841191, but the procedure is not clear. If I can't see the list of hiers from the infopackage how can I select them as 'Relevant for BW'?
Here are the steps for the procedure:
You must therefore carry out the following steps in your target system:
 1. Transport a hierarchy package for a DataSource that you want to load into the target system (the selections will most definitely disappear in this case because the rsosohie/t contains nothing at all for this DataSource).
 2. In your hierarchy package in the target BW, select the 'Refresh' button in the hierarchy tab.
 3. Select all hierarchies that you want to use later with an InfoPackage as 'Relevant for BW'.
 4. You can now transport the hierarchy packages. The selections are retained if the hierarchies in the target BW have the same names as the hierarchies in the source BW.
Would someone clarify what OSS is saying here.
Thanks
Will

Hi Sudheer,
I am not sure about this landscape. I am used to working with a one-to-one mapping of systems. I checked the Tools and mapping of source systems, and it saids on BWQ:
BWD100 BWQ100 BW Quality
DEV100 QAS500 QAS Client 500
QAS100 QAS500 QAS Client 500
On BWD, it saids:
QAS100 DEV100 DEV Client 100
It seems that QAS 100 is mapped to QAS500. I am totally not getting this. I am not sure why QAS100 is mapped to QAS500, so may be it is a correct set up and I just have to do something else for this landscape.
Thanks

ALV display for row s and columns in this format.have ur full points..

Hi ALL
I have to dispalay data in the ALV format as :
Basic
DA
HRA
PF
VPF
20000
500
5000
| 1500 | 600 | |
Details : Basic HRA in one Row and PF , VPF in second Row.
The Amount regarding htese fields are also displayed in the next rows for all emp. numbers.
its urgent for me and need helpful answers...
Regards
Lakhan

see the attached code it will display the hierarchial display as per your need
change the internal tables with dat of your own orgn structure and pass it to the fun module.
Description : Pick Status Report
This is an ALV report using the heirarchical ALV list display. The
report selects all deliveries that fulfil the selection criteria
and displays a summary of all items in that delivery with reference
to certain statuses: overall status, goods issue status, transfer
order status, load to pallet status, pallet count status, loaded to
van status, van manifest printed status and end of day manifest
printed status. These statuses have been defined by the business.
There is extra functionality required to trigger printing of the van
and end of day manifests from this report, and to set the loading
end status of a shipment if the last handling unit of a particular
shipment has been loaded onto a van for which the van manifest has
been triggered.
REPORT zwmr_pick_status_report NO STANDARD PAGE HEADING
MESSAGE-ID zw.
Type Pools
TYPE-POOLS: icon, slis.
Tables
TABLES: tvst,
likp,
t30b,
vekp,
*{ INSERT UKMK900355 4
zhu_to_link, "AS03
*} INSERT
zpallettr,
vttk, "MB01
zvantr.
Types
TYPES:
BEGIN OF ty_data,
lgtor LIKE likp-lgtor, " door
vbeln LIKE likp-vbeln, " delivery
wbstk LIKE vbuk-wbstk, " Goods movement status
kostk LIKE vbuk-kostk, " Picking status
posnr LIKE lips-posnr, " item
route LIKE likp-route, " route
wadat LIKE likp-wadat, " goods issue date
lvsta LIKE vbup-lvsta, " warehouse status
packvorschr LIKE vekp-packvorschr, " pack mnemonic
exidv LIKE vekp-exidv, " handling unit
zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
zdep_point LIKE zpallettr-zdep_point, "Departur Point "Jvdm01
zcount_check LIKE zpallettr-zcount_check," count check flag
zvan_no(10), "like zvantr-zvan_no, " van no
zvan_print LIKE zvantr-zvan_print, " van manifest print
tknum LIKE vttk-tknum, " Shipment No "ANV 11523
zeod_print LIKE zvantr-zeod_print, " eod manifest print
zzpackclass LIKE vekp-zzpackclass, " package class
zzti LIKE vekp-zzti, " T.I. value
vstel LIKE likp-vstel, "Shipping point RM050906
anzpk TYPE znopack, "No of packages in dlv MB01+
END OF ty_data.
TYPES:BEGIN OF x_likp ,
vbeln LIKE likp-vbeln,
vstel LIKE likp-vstel, "RM050906
lgtor LIKE likp-lgtor,
zzroute2lgtor LIKE likp-zzroute2lgtor, "MB01
route LIKE likp-route,
wadat LIKE likp-wadat,
zz2route LIKE likp-zz2route, "MB01+
zzexproute LIKE likp-zzexproute, "MB01+
zzroute2 LIKE likp-zzroute2, "MB01+
anzpk LIKE likp-anzpk,
END OF x_likp.
TYPES: BEGIN OF x_vbuk,
vbeln TYPE vbuk-vbeln,
wbstk TYPE vbuk-wbstk, " Goods movement status
kostk TYPE vbuk-kostk, " Picking status
END OF x_vbuk.
TYPES: BEGIN OF x_lips,
vbeln TYPE lips-vbeln, " delivery
posnr TYPE lips-posnr, " item
pstyv TYPE lips-pstyv,
matnr TYPE lips-matnr,
charg TYPE lips-charg,
END OF x_lips.
TYPES: BEGIN OF x_vbup,
vbeln TYPE vbup-vbeln, " delivery
posnr TYPE vbup-posnr, " item
lvsta TYPE vbup-lvsta, " warehouse status
END OF x_vbup.
TYPES: BEGIN OF x_vepo,
venum TYPE vepo-venum, "Internal Handling Unit
Number
vepos TYPE vepo-vepos, "Handling Unit Item
vbeln TYPE vepo-vbeln, " delivery
posnr TYPE vepo-posnr, " item
exidv TYPE vekp-exidv,
END OF x_vepo.
TYPES: BEGIN OF x_vepo1,
venum TYPE vekp-venum, "Internal Handling Unit
Number
exidv TYPE vekp-exidv,
END OF x_vepo1.
Start of changes by ANV SR#11523
TYPES: BEGIN OF x_vttp,
tknum TYPE tknum, " Shipment No
tpnum TYPE tpnum, " Item No
vbeln TYPE vbup-vbeln, " delivery
laufk LIKE vttk-laufk, " leg indicator MB01+
END OF x_vttp.
End of changes by ANV SR#11523
Data
RANGES: r_del FOR likp-vbeln,
r_lgtor FOR likp-lgtor.
RANGES: r_vanno FOR zvantr-zvan_no,
r_palno FOR zpallettr-zpallet_no.
DATA: BEGIN OF number_range OCCURS 0,
mark(1),
id(3),
num(10) TYPE n,
desc LIKE zpalletmd-zdesc,
END OF number_range.
DATA: t_disp_tab TYPE STANDARD TABLE OF zpickdisp,
t_data_tab TYPE ty_data OCCURS 0 WITH HEADER LINE,
it_likp TYPE x_likp OCCURS 0 WITH HEADER LINE, "SUM
it_vbuk TYPE x_vbuk OCCURS 0 WITH HEADER LINE, "SUM
it_lips TYPE x_lips OCCURS 0 WITH HEADER LINE, "SUM
it_vbup TYPE x_vbup OCCURS 0 WITH HEADER LINE, "SUM
it_vepo TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
it_vepo2 TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
*{ INSERT UKMK900355 3
t_vepo_low TYPE x_vepo OCCURS 0 WITH HEADER LINE, " AS01
*} INSERT
it_vepo1 TYPE x_vepo1 OCCURS 0 WITH HEADER LINE, "SUM
it_vttp TYPE x_vttp OCCURS 0 WITH HEADER LINE, "ANV SR#11523
t_disp_head TYPE STANDARD TABLE OF zpickhead.
DATA wa_item_tab TYPE zpickdisp OCCURS 0 WITH HEADER LINE.
"ANV SR#11113
DATA: w_numrnge LIKE number_range,
w_number(10) TYPE n.
DATA: t_likp LIKE likp OCCURS 0 WITH HEADER LINE,
t_lips LIKE lips OCCURS 0 WITH HEADER LINE,
t_vbuk LIKE vbuk OCCURS 0 WITH HEADER LINE,
t_vbup LIKE vbup OCCURS 0 WITH HEADER LINE,
t_vepo LIKE vepo OCCURS 0 WITH HEADER LINE,
t_vekp LIKE vekp OCCURS 0 WITH HEADER LINE,
t_vantr LIKE zvantr OCCURS 0 WITH HEADER LINE,
t_pallettr LIKE zpallettr OCCURS 0 WITH HEADER LINE,
w_likp like likp,
w_lips LIKE lips,
w_vbuk LIKE vbuk,
w_vbup LIKE vbup,
w_vepo LIKE vepo,
w_vekp LIKE vekp,
w_vepo TYPE x_vepo1,
w_vbup TYPE x_vbup,
w_vttp TYPE x_vttp, " ANV SR#11523
w_lips TYPE x_lips,
w_vbuk TYPE x_vbuk,
w_likp TYPE x_likp, "MB01-+
w_tplst LIKE vttk-tplst. "MB01+
DATA: s_variant LIKE disvariant, "MB01+
def_variant LIKE disvariant.
ALV DATA *****
DATA:
g_grid TYPE REF TO cl_gui_alv_grid,
g_sort TYPE slis_t_sortinfo_alv,
g_custom_container TYPE REF TO cl_gui_custom_container,
g_layout TYPE slis_layout_alv,
gt_fieldcat TYPE slis_t_fieldcat_alv,
t_fldcat LIKE LINE OF gt_fieldcat,
g_keyinfo TYPE slis_keyinfo_alv,
gt_events TYPE slis_t_event,
gs_event TYPE slis_alv_event,
w_sy_repid LIKE sy-repid.
DATA: BEGIN OF seltab OCCURS 0.
INCLUDE STRUCTURE rsparams.
DATA: END OF seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
CONTROLS: tc_tabcon TYPE TABLEVIEW USING SCREEN 0100.
LINES OF TABLECONTROL 'TC_TABCON'
DATA: g_tc_tabcon_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
Constants
CONSTANTS: c_data_class LIKE klah-class VALUE 'DG_DATA',
c_mat_class LIKE rmclf-klart VALUE '001',
c_pack LIKE lips-mtart VALUE 'VERP',
c_a(1) VALUE 'A',
c_b(1) VALUE 'B',
c_c(1) VALUE 'C',
c_yes(1) VALUE 'X',
c_no(1) VALUE ' '.
Selection screen
standard report select options block
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-002.
SELECT-OPTIONS:
s_wadat FOR likp-wadat NO-EXTENSION OBLIGATORY. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
SELECT-OPTIONS: "TR01+
p_vstel FOR tvst-vstel. " Shipping Point "TR01+
SELECT-OPTIONS:
s_lfart FOR likp-lfart, " Delivery type
s_lgtor FOR t30b-lgtor, " Door selection
s_exidv FOR vekp-exidv, " Handling Unit
s_vbeln FOR likp-vbeln, " Delivery "MB01-+
s_lfdat FOR likp-lfdat. " Delivery date
PARAMETERS:
p_exdata AS CHECKBOX. " Show extra columns flag
SELECTION-SCREEN END OF BLOCK a.
van/pallet specific select options block
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_palno FOR zpallettr-zpallet_no, " no-extension,
s_vanno FOR zvantr-zvan_no. " no-extension.
SELECT-OPTIONS:
s_deppnt FOR zpallettr-zdep_point, "Jvdm01
s_tplst FOR vttk-tplst. "MB01
SELECTION-SCREEN END OF BLOCK b.
MB01 - START - Display variant
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-019.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK c.
MB01 - END
Value Request Events
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-high = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-high = w_number.
MB01 - START - display variant
F4-Help for variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
MB01 - END
At Selection Screen
AT SELECTION-SCREEN.
PERFORM validate_selections.
Initialization
INITIALIZATION.
MB01 - START INSERT
1. Transportation planning point
Import transportation planning point from user parameters and
populate
select option.
GET PARAMETER ID 'TDP' FIELD w_tplst.
MOVE: 'I' TO s_tplst-sign,
'EQ' TO s_tplst-option,
w_tplst TO s_tplst-low.
APPEND s_tplst.
2. Display variant
CLEAR s_variant.
s_variant-report = sy-repid.
Get default variant
s_def_variante = s_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = s_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = s_variant-variant.
ENDIF.
MB01 - END INSERT
Start of selection
START-OF-SELECTION.
clear all data tables
CLEAR: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr,
w_likp,
w_lips,
w_vbuk,
w_vbup,
w_vepo,
w_vekp.
REFRESH: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
IF NOT s_vanno IS INITIAL
OR NOT s_palno IS INITIAL
OR NOT s_deppnt IS INITIAL. "Jvdm01
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
PERFORM select_data_up.
ELSE.
otherwise the data can be selected from the delivery downwards
PERFORM select_data_down.
ENDIF.
End of selection
END-OF-SELECTION.
call hierarchical ALV display function module
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
i_callback_pf_status_set = 'SET_STATUS'
i_callback_user_command =
'USER_COMMAND' "custom gui status form
is_layout = g_layout "user command form
it_fieldcat = gt_fieldcat
it_sort = g_sort
i_save = 'X' "MB01+
is_variant = s_variant
it_events = gt_events
i_tabname_header = 't_disp_head'
i_tabname_item = 't_disp_tab'
i_structure_name_header = 'ZPICKHEAD'
i_structure_name_item = 'ZPICKDISP'
is_keyinfo = g_keyinfo
TABLES
t_outtab_header = t_disp_head
t_outtab_item = t_disp_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORMS
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
INCLUDE zwmr_pick_o01.
INCLUDE zwmr_pick_status_reporto01 .
INCLUDE zwmr_pick_i01.
INCLUDE zwmr_pick_status_reporti01 .
INCLUDE zwmr_pick_f01.
INCLUDE zwmr_pick_status_reportf01 .
*& Form select_pal_nos
select pallet numbers for search help
FORM select_pal_nos.
DATA: BEGIN OF t_palno OCCURS 0,
zpallet_no LIKE zpallettr-zpallet_no,
END OF t_palno.
select all available pallet numbers
SELECT DISTINCT zpallet_no FROM zpallettr
INTO CORRESPONDING FIELDS OF TABLE t_palno.
LOOP AT t_palno.
get pallet id
SELECT SINGLE zpallet_id FROM zpallettr
INTO number_range-id
WHERE zpallet_no = t_palno-zpallet_no.
get pallet description
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_palno-zpallet_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_pal_nos
*& Form select_van_nos
select van numbers for search help
FORM select_van_nos.
DATA: BEGIN OF t_vanno OCCURS 0,
zvan_no LIKE zvantr-zvan_no,
END OF t_vanno.
select available van numbers
SELECT DISTINCT zvan_no FROM zvantr
INTO CORRESPONDING FIELDS OF TABLE t_vanno.
LOOP AT t_vanno.
select van id
SELECT SINGLE zvan_id FROM zvantr
INTO number_range-id
WHERE zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_vanno-zvan_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_van_nos
*& Form select_data_down
select data if selecting from delivery down
FORM select_data_down.
select all deliveries from LIKP that fulfill selection criteria
Start SU01 optmization changes
SELECT vbeln vstel lgtor route wadat "RM050906
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp"MB01-+
WHERE vbeln IN s_vbeln
AND vstel IN p_vstel
AND lfart IN s_lfart
AND wadat IN s_wadat
AND lfdat IN s_lfdat "MB01+
AND
( lgtor IN s_lgtor OR zzroute2lgtor IN s_lgtor ) ."MB01+
IF sy-subrc NE 0.
no data found
MESSAGE i007.
EXIT.
ENDIF.
IF NOT t_likp[] IS INITIAL. "SUM
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln. "SUM
select sales document headers from VBUK
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp "SUM
WHERE vbeln EQ it_likp-vbeln. "SUM
SORT it_vbuk BY vbeln.
select all relevant delivery items from LIPS
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
select all sales document line items from VBUP
SORT it_lips BY vbeln posnr. "SUM
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT it_vbup BY vbeln posnr.
select corresponding handling unit ID's (venum)
TR03 Replace
start
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
SELECT vepoVENUM vepoVEPOS vepovbeln vepoposnr
FROM vepo as vepo
INNER JOIN vekp as vekp ON vepovenum = vekpvenum
APPENDING corresponding fields of table it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vepo~vbeln = it_lips-vbeln
AND vepo~posnr = it_lips-posnr
AND vepo~matnr = it_lips-matnr
AND vepo~charg = it_lips-charg
AND vekp~exidv IN s_exidv.
SELECT venum vepos vbeln posnr
FROM vepo INTO TABLE it_vepo2
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
SORT it_vepo2 BY venum vepos.
*{ INSERT UKMK900355 1
Ice-multis: replace lower-level HUs with highest level " AS01
PERFORM replace_highest_hu. " AS01
*} INSERT
Start of changes by ANV SR#11523
MB01 - extract shipment header as well to populate leg indicator
Therefore, join vttp with vttk
Limit as well by transportation planning point
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
IF NOT it_vepo2[] IS INITIAL.
SELECT venum exidv
FROM vekp INTO TABLE it_vepo1
FOR ALL ENTRIES IN it_vepo2
WHERE venum = it_vepo2-venum
AND exidv IN s_exidv.
ENDIF.
SORT it_vepo1 BY venum.
CLEAR: w_vepo, it_vepo.
LOOP AT it_vepo1.
READ TABLE it_vepo2 WITH KEY venum = it_vepo1-venum.
IF sy-subrc = 0.
it_vepo2-exidv = it_vepo1-exidv.
MODIFY it_vepo2 TRANSPORTING exidv
WHERE venum = it_vepo1-venum .
ENDIF.
ENDLOOP.
DELETE it_vepo2 WHERE exidv IS initial.
it_vepo[] = it_vepo2[].
TR03 Replace end
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_down
*& Form select_data_up
select data if selecting from van/pallet up
FORM select_data_up.
IF NOT s_vanno IS INITIAL.
if van then select van numbers and hence pallet numbers
SELECT * FROM zvantr INTO TABLE t_vantr
WHERE zvan_no IN s_vanno.
and vstel eq p_vstel."TR01-
IF NOT t_vantr[] IS INITIAL.
SORT t_vantr BY zvan_id zvan_no vstel zpallet_no. "SUM
SELECT * FROM zpallettr INTO TABLE t_pallettr
FOR ALL ENTRIES IN t_vantr
WHERE zpallet_no EQ t_vantr-zpallet_no
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
ELSE.
otherwise can get pallet numbers directly
SELECT * FROM zpallettr INTO TABLE t_pallettr
WHERE zpallet_no IN s_palno
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
IF NOT t_pallettr[] IS INITIAL.
from the pallet nos. we can select the handling units
SORT t_pallettr BY zpallet_id zpallet_no vstel exidv. "SUM
SELECT * FROM vekp INTO TABLE t_vekp
FOR ALL ENTRIES IN t_pallettr
WHERE exidv EQ t_pallettr-exidv
AND exidv NE space
AND exidv IN s_exidv "TR03+
AND ( exida = 'E' "TR01+
OR exida = 'F' ). "TR01+
ENDIF.
SORT t_vekp BY venum. "SUM
IF NOT t_vekp[] IS INITIAL.
build vbeln range from t_vekp.
LOOP AT t_vekp.
r_del-sign = 'I'.
r_del-option = 'EQ'.
r_del-low = t_vekp-vpobjkey.
APPEND r_del.
ENDLOOP.
select all deliveries from LIKP that correspond to HU's
SELECT * FROM likp INTO TABLE t_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
ENDIF.
MB01- START
SELECT vbeln lgtor route wadat
FROM likp INTO TABLE it_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp
WHERE vbeln IN r_del
AND lfart IN s_lfart
AND wadat IN s_wadat "MB01-+
AND lfdat IN s_lfdat. "MB01+
MB01- END
ENDIF.
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln . "SUM
select sales document headers from VBUK
SELECT * FROM vbuk INTO TABLE t_vbuk
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln.
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln.
SORT it_vbuk BY vbeln. "SUM
select all relevant delivery items from LIPS
SELECT * FROM lips INTO TABLE t_lips
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln
AND pstyv NE 'ZPAC'
AND pstyv NE 'ZGDP' "TR02+
AND lfimg GT 0. "TR01+
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
SORT it_lips BY vbeln posnr. "SUM
select all sales document line items from VBUP
SELECT * FROM vbup INTO TABLE t_vbup
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vbeln
AND posnr = t_lips-posnr.
Start of changes by ANV SR#11523
MB01 - START
join vttp with vttk to obtain leg indicator
SELECT tknum tpnum vbeln
FROM vttp INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln.
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT t_vbup BY vbeln posnr. "SUM
select corresponding handling unit ID's (venum)
SELECT * FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE t_vepo
FOR ALL ENTRIES IN t_lips
WHERE vbeln = t_lips-vbeln
AND posnr = t_lips-posnr
AND matnr = t_lips-matnr
AND charg = t_lips-charg.
SELECT venum vepos vbeln posnr
FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
*{ INSERT UKMK900355 1
it_vepo2[] = it_vepo[]. " DS01
PERFORM replace_highest_hu. " DS01
it_vepo[] = it_vepo2[]. " DS01
*} INSERT
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_up
*& Form move_to_table
move data to processing table
FORM move_to_table.
LOOP AT it_vepo.
CLEAR t_data_tab.
delivery lines.
CLEAR w_lips.
READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_lips BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_lips TO t_data_tab.
sales document line items
CLEAR w_vbup.
READ TABLE it_vbup WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_vbup BINARY SEARCH. "SUM
if w_vbup-kosta = space. "TR01-
not relevant for picking
delete t_vepo. "TR01-
continue. "TR01-
else. "TR01-
MOVE-CORRESPONDING w_vbup TO t_data_tab.
endif. "TR01-
sales doc header
CLEAR w_vbuk.
READ TABLE it_vbuk WITH KEY vbeln = it_vepo-vbeln
INTO w_vbuk BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_vbuk TO t_data_tab.
delivery header
CLEAR w_likp.
READ TABLE it_likp WITH KEY vbeln = it_vepo-vbeln
INTO w_likp BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_likp TO t_data_tab.
MB01 - START
DATA: w_routetype TYPE i. "0=non-global,1=1st route,2=2nd
route,3=both
At this point move DOOR2 if it falls within the global route scenario
and the door2 is satisfies the selection criteria for door
1. Does delivery fall within global route scenario
CLEAR w_routetype.
IF w_likp-zz2route = 'Y' .
1.a. First route - does door1 satisfy the selection criteria
IF w_likp-lgtor IN s_lgtor.
w_routetype = 1.
MOVE w_likp-zzexproute TO t_data_tab-route.
1.b. Second route - does door2 satisfy the selection criteria
ELSEIF w_likp-zzroute2lgtor IN s_lgtor.
here we need to move door2 to lgtor
w_routetype = 2.
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
ENDIF.
If both routes satsify the criteria, append for 2nd leg ***REVISIT!
IF w_likp-lgtor IN s_lgtor AND w_likp-zzroute2lgtor IN s_lgtor.
w_routetype = 3.
ENDIF.
ENDIF.
MB01 - END
Start of changes by ANV SR#11523
MB01 - If the delivery falls within the global route scenario... need
to select either preliminary shipment leg OR subsequent leg
when laufk= 1 (prelim) and linked to route1, if laufk = 2 (subseq) &
linked to route2
Shipment Number
SORT it_vttp BY vbeln laufk.
CLEAR w_vttp.
CASE w_routetype.
WHEN 0.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
INTO w_vttp BINARY SEARCH.
WHEN 1.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '1'
INTO w_vttp BINARY SEARCH.
WHEN 2.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
WHEN 3. "REVISIT
ENDCASE.
MOVE w_vttp-tknum TO t_data_tab-tknum.
MB01 - END
End of changes by ANV SR#11523
select handling unit info using vepo entry
CLEAR w_vekp.
IF t_vekp[] IS INITIAL.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = it_vepo-venum.
ELSE.
READ TABLE t_vekp WITH KEY venum = it_vepo-venum
INTO w_vekp BINARY SEARCH. "SUM
IF sy-subrc NE 0.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = t_vepo-venum.
ENDIF.
ENDIF.
MOVE-CORRESPONDING w_vekp TO t_data_tab.
*{ INSERT UKMK900355 2
WM status for HU "AS03
SELECT SINGLE * FROM zhu_to_link WHERE lgnum EQ w_vekp-lgnum"AS03
AND exidv EQ w_vekp-exidv."AS03
IF sy-subrc EQ 0. "AS03
IF zhu_to_link-zpick_comp EQ space. "AS03
t_data_tab-lvsta = 'B'. "AS03
ELSE. "AS03
t_data_tab-lvsta = 'C'. "AS03
ENDIF. "AS03
ENDIF. "AS03
*} INSERT
select pallet / van load information "Jvdm01-
SELECT SINGLE zpallet_no zcount_check FROM zpallettr "Jvdm01-
INTO (t_data_tab-zpallet_no, "Jvdm01-
t_data_tab-zcount_check) "Jvdm01-
WHERE exidv EQ w_vekp-exidv. "Jvdm01-
PERFORM read_pallet. "MB01+
SELECT SINGLE zpallet_no zcount_check zdep_point "Jvdm01+
FROM zpallettr "Jvdm01+
INTO (t_data_tab-zpallet_no, "Jvdm01+
t_data_tab-zcount_check, "Jvdm01+
t_data_tab-zdep_point) "Jvdm01+
WHERE exidv EQ w_vekp-exidv. "Jvdm01+
WHERE exidv EQ w_vekp-exidv "MB01-+
AND zpallet_id = t_data_tab-lgtor."MB01+
MB01 - INSERT START
If pallet number specified and
we are in the global route scenario & both doors fall within the
selection criteria, we need to copy the one that is currently in a
specified pallet
IF NOT s_palno IS INITIAL AND not t_data_tab-zpallet_no in s_palno
AND w_routetype = '3' .
Switch doors & get 2nd shipment
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
Read subsequent leg shipment
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
IF sy-subrc = 0.
MOVE w_vttp-tknum TO t_data_tab-tknum.
ENDIF.
PERFORM read_pallet. "MB01+
ENDIF.
MB01 - INSERT END
IF NOT t_data_tab-zpallet_no IN s_palno. "TR01+
CONTINUE. "TR01+
ENDIF. "TR01+
IF sy-subrc = 0. "mb01+
perform read_van. "MB01+
SELECT SINGLE zvan_no zvan_print zeod_print FROM zvantr
INTO (t_data_tab-zvan_no,
t_data_tab-zvan_print,
t_data_tab-zeod_print)
WHERE zpallet_no EQ t_data_tab-zpallet_no.
MB01 - INSERT START
If van number specified and
we are in the global route scenario & both doors fall within the
selection criteria, we need to copy the one that is currently on a
specified van
IF NOT s_vanno IS INITIAL AND not t_data_tab-zvan_no in s_vanno AND
w_routetype = '3' .
Switch doors & get 2nd shipment
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
Read subsequent leg shipment
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
IF sy-subrc = 0.
MOVE w_vttp-tknum TO t_data_tab-tknum.
ENDIF.
PERFORM read_pallet. "MB01+
perform read_van.
ENDIF. "mb01-
MB01 - INSERT END
IF NOT t_data_tab-zvan_no IN s_vanno. "TR01+
CONTINUE. "TR01+
ENDIF. "TR01+
ENDIF.
APPEND t_data_tab.
ENDLOOP.
*-----> TR01+ start
If the delivery has yet to be packed, then need to include in report
Thus delete t_lips here and if any entries left after looping through
t_vepo, these will also need to be added to t_data_tab
if the selection is by handling unit though we do not want
these"TR03+
IF s_exidv IS INITIAL. "TR03+
*{ REPLACE UKMK900355 1
*\ LOOP AT it_vepo.
*\ READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
*\ posnr = it_vepo-posnr
*\ BINARY SEARCH. "SUM
*\ IF sy-subrc = 0.
*\ DELETE it_lips INDEX sy-tabix.
*\ ENDIF.
*\ ENDLOOP.
Higher-level HUs can contain more than one delivery item " AS01
LOOP AT it_lips. " AS01
READ TABLE t_vepo_low WITH KEY vbeln = it_lips-vbeln " AS01
posnr = it_lips-posnr. " AS01
CHECK sy-subrc EQ 0. " AS01
DELETE it_lips. " AS01
ENDLOOP. " AS01
*} REPLACE
IF NOT it_lips[] IS INITIAL.
move any unpacked items to the data table
PERFORM move_lips_to_table.
ENDIF.
ENDIF. "TR03+
*<---- TR01+ End
get relevant status icons
PERFORM select_icons.
prepare ALV data
PERFORM prepare_alv.
ENDFORM. " select_data
*& Form select_icons
select icons for display and move data to display table
FORM select_icons.
DATA: w_disp_tab LIKE zpickdisp,
w_disp_head LIKE zpickhead,
w_color LIKE zpickdisp-color,
ov_icon LIKE zpickdisp-ov_icon,
gi_icon LIKE zpickdisp-gi_icon,
to_icon LIKE zpickdisp-to_icon,
lp_icon LIKE zpickdisp-lp_icon,
pc_icon LIKE zpickdisp-pc_icon,
lv_icon LIKE zpickdisp-lv_icon,
vm_icon LIKE zpickdisp-vm_icon,
em_icon LIKE zpickdisp-em_icon,
sp_icon LIKE zpickdisp-sp_icon, " ANV SR#11523
t_ovst_tab LIKE t_disp_tab WITH HEADER LINE.
CONSTANTS: c_col1(3) VALUE 'C10',
c_col2(3) VALUE 'C20'.
SORT t_data_tab BY lgtor vbeln.
w_color = c_col2.
LOOP AT t_data_tab.
AT NEW lgtor.
fill ALV header table
CLEAR w_disp_head.
w_disp_head-lgtor = t_data_tab-lgtor.
APPEND w_disp_head TO t_disp_head.
ENDAT.
goods issue status & overall amber/green only
CASE t_data_tab-wbstk.
WHEN c_c.
MOVE icon_green_light TO gi_icon.
MOVE icon_green_light TO ov_icon.
WHEN OTHERS.
MOVE icon_red_light TO gi_icon.
MOVE icon_yellow_light TO ov_icon.
ENDCASE.
transfer order status
CASE t_data_tab-lvsta.
WHEN c_a.
MOVE icon_red_light TO to_icon.
WHEN c_b.
MOVE icon_yellow_light TO to_icon.
WHEN c_c.
MOVE icon_green_light TO to_icon.
WHEN space.
write N/A
to_icon = 'N/A'.
ENDCASE.
loaded to pallet status
IF NOT t_data_tab-zpallet_no IS INITIAL.
MOVE icon_green_light TO lp_icon.
ELSE.
MOVE icon_red_light TO lp_icon.
ENDIF.
pallet count status
IF NOT t_data_tab-zcount_check IS INITIAL.
MOVE icon_green_light TO pc_icon.
ELSE.
MOVE icon_red_light TO pc_icon.
ENDIF.
loaded to van status
IF NOT t_data_tab-zvan_no IS INITIAL.
MOVE icon_green_light TO lv_icon.
ELSE.
MOVE icon_red_light TO lv_icon.
ENDIF.
van manifest status
IF NOT t_data_tab-zvan_print IS INITIAL.
MOVE icon_green_light TO vm_icon.
ELSE.
MOVE icon_red_light TO vm_icon.
ENDIF.
Start of changes by ANV SR#11523
Shipment status
IF NOT t_data_tab-tknum IS INITIAL.
MOVE icon_green_light TO sp_icon.
ELSE.
MOVE icon_red_light TO sp_icon.
ENDIF.
End of changes by ANV SR#11523
end of day manifest status
IF NOT t_data_tab-zeod_print IS INITIAL.
MOVE icon_green_light TO em_icon.
ELSE.
MOVE icon_red_light TO em_icon.
ENDIF.
move working data table to display table
MOVE-CORRESPONDING t_data_tab TO w_disp_tab.
w_disp_tab-ov_icon = ov_icon.
w_disp_tab-gi_icon = gi_icon.
w_disp_tab-to_icon = to_icon.
w_disp_tab-lp_icon = lp_icon.
w_disp_tab-pc_icon = pc_icon.
w_disp_tab-lv_icon = lv_icon.
w_disp_tab-vm_icon = vm_icon.
w_disp_tab-em_icon = em_icon.
w_disp_tab-sp_icon = sp_icon. "ANV SR#11523
w_disp_tab-color = w_color.
fill N/A values for initial fields for display
IF w_disp_tab-packvorschr IS INITIAL.
w_disp_tab-packvorschr = 'N/A'.
ENDIF.
IF w_disp_tab-exidv IS INITIAL.
w_disp_tab-exidv = 'N/A'.
ENDIF.
IF w_disp_tab-zpallet_no IS INITIAL.
WRITE 'N/A' TO w_disp_tab-zpallet_no.
ENDIF.
IF w_disp_tab-zvan_no IS INITIAL.
WRITE 'N/A' TO w_disp_tab-zvan_no.
ENDIF.
display different color for new doc number
AT END OF vbeln.
IF w_color = c_col1.
w_color = c_col2.
ELSEIF w_color = c_col2.
w_color = c_col1.
ENDIF.
ENDAT.
APPEND w_disp_tab TO t_disp_tab.
CLEAR w_disp_tab.
ENDLOOP.
we have all the icons in display but need to check the overall status
as this refers to the line items
green and amber statuses already set and use the same criteria as the
goods issue status unless detected as red here
DATA: ov_stat_red(1).
CLEAR w_disp_tab.
SORT t_disp_tab BY vbeln.
LOOP AT t_disp_tab INTO w_disp_tab.
AT NEW vbeln.
check all line items for delivery
LOOP AT t_data_tab WHERE vbeln = w_disp_tab-vbeln.
IF t_data_tab-lvsta = c_a.
set overall status to red
ov_stat_red = c_yes.
EXIT.
ELSE.
leave green/amber status icon as previosly determined
ENDIF.
ENDLOOP.
IF ov_stat_red = c_yes.
set overall status to red for all items in that delivery
CLEAR ov_stat_red.
MOVE icon_red_light TO w_disp_tab-ov_icon.
MODIFY t_disp_tab FROM w_disp_tab TRANSPORTING ov_icon
WHERE vbeln = w_disp_tab-vbeln.
ENDIF.
ENDAT.
ENDLOOP.
ENDFORM. " select_icons
*& Form fill_layout
fill ALV layout parameters
FORM fill_layout.
CLEAR g_layout.
g_layout-colwidth_optimize = c_yes. " column width optimisation
g_layout-zebra = space. " alternate line colors
g_layout-box_fieldname = 'MARK'. " checkbox fieldname
g_layout-info_fieldname = 'COLOR'. " highlight row indicator
g_layout-no_vline = space. " vertical line
g_layout-key_hotspot = space. " hotspot field
g_layout-f2code = 'PICK'. " F2 ok_code
g_layout-numc_sum = c_yes. " sum numc fields
g_layout-box_tabname = 't_disp_head'. " checkbox table name
g_layout-expand_fieldname = 'EXPAND'. " expand field name
ENDFORM. " fill_layout
*& Form fill_sort
fill ALV sort table
FORM fill_sort.
DATA: w_g_sort TYPE slis_sortinfo_alv.
w_g_sort-spos = 1.
w_g_sort-fieldname = 'LGTOR'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.
w_g_sort-spos = 2.
w_g_sort-fieldname = 'VBELN'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.
w_g_sort-spos = 3.
w_g_sort-fieldname = 'POSNR'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.

Restiction selection of Hierarchies in BI 7.0

Similar Messages

Maybe you are looking for