Heirarchy selection adding a + to heriarchy nodes and report

Does anyone have a solution for this problem which has suddenly started appearing in our variable selection for hierarchies.
When I run a query I get a selection/variable screen for fund centre which allows me to pick from the hierarchy for funds centre for my particular client (client been different source clients). The variable is filled from a user exit for authorizations for user and hierarchy related to client but this been like this for 3 years without this problem.
When I choose a hierarchy node from the list (TK for example) it is replaced with +TK in the selection box so it is adding a + for some reason?? Even thought the hierarchy seems fine that is loaded in to BW.
I try and execute and I get a message saying:-
u2018Input data for +TK (text\node) has an invalid formatu2019
When I overwrite the +TK with TK directly in the selection field for fund centre I get the result as normal from the report.
Any ideas what has caused the problem???

This is a bug, Please apply the note below,
1522108 Parcer error for hierarchy value with special chara

Similar Messages

Report node and reports repository

what is the difference between report node and reports repository. I know that Process schedular picks the report from report repository in order to show in process monitor. Does report node and reports repository are same??

After a report runs to success in runstatusYeah, but the files are send to the report repository even if it is not successful terminated (run status is not sucess). If the files are not sent to the report repository, then the problem doesn't come from the process itself, but from the definition, space availibity...
When a report has been posted sucessfully (transfered from the process scheduler report repository - on the other hands the log_output dir, to the report repository defined into the report node), the status of the distribution status is Posted.
The run status and distribution status are independant eachother.
Nicolas.

Serching with the heriarchy node and not the funds center name

Hi,
I am executing a query with a heirarchy on funds center and a heirarchy selection variable on the web. When the selection appears I use the search help box to select a funds center. When it appears in the selection screen it is using the node name and compounding it with the financial managment area. This returns an error as it is looking for the master data name not the heirarcy node name.
1MAR/1MAR41000991000 - Returns Errors
1MAR/41000991000 - Returns data.
Any thoughts?
Thanks Heather

Issues was resolved with an OSS note 1090428.

TreeView - Expand only selected node and collapse others

Hi
How I can expand only selected node and collapse other nodes that was expanded earlier?!

Ghostenigma,
switch Option Strict On. I've tried to analyze the code but it's not usable due to type ignorance.
BTW, Goto is not required here. ELSEif means it's only executed if the previous expressions are not true.
Armin
Ignore other code and give an reply for what I've asked else you are not obligated to post a reply at all!
I am not sure if you took the "type ignorance" part wrong but, Armin was only trying to give you helpful information which i would give too. Option Strict is a GOOD thing to use and the GoTo statements are not needed inside your ElseIf
statements. As far as that goes, i would not recommend using GoTo in any modern .Net programming.
Anyways, the problem is with the way you are Adding and Removing all the child nodes every time the nodes are DoubleClicked and when they are Collapsing. I just simulated your code to add the sub nodes when a main node is double clicked.
You can just use the NodeMouseDoubleClick event instead of the TreeView`s DoubleClick event to make it a little easier on yourself too.
This corrected the problem for me.
Public Class Form1
Private r As New Random ' this random class is only for my simulation of adding sub nodes (not needed)
Private expanded As TreeNode
Private Sub TreeView1_BeforeCollapse(ByVal sender As Object, ByVal e As System.Windows.Forms.TreeViewCancelEventArgs) Handles TreeView1.BeforeCollapse
e.Node.Nodes.Clear()
End Sub
Private Sub TreeView1_BeforeExpand(ByVal sender As Object, ByVal e As System.Windows.Forms.TreeViewCancelEventArgs) Handles TreeView1.BeforeExpand
Dim pn As TreeNode = e.Node
While pn.Parent IsNot Nothing
pn = pn.Parent
End While
If expanded IsNot Nothing And expanded IsNot pn Then expanded.Collapse()
expanded = pn
End Sub
Private Sub TreeView1_NodeMouseDoubleClick(ByVal sender As Object, ByVal e As System.Windows.Forms.TreeNodeMouseClickEventArgs) Handles TreeView1.NodeMouseDoubleClick
'Added this part to collapse the prior expanded node and set the (expanded) node to the new one
If expanded IsNot Nothing And expanded IsNot e.Node Then
expanded.Collapse()
Dim pn As TreeNode = e.Node
While pn.Parent IsNot Nothing
pn = pn.Parent
End While
expanded = pn
End If
'This just simulates your code to add the new sub nodes to the main node that was double clicked
'you need to put your code here instead of this.
Dim str() As String = {"one.mp3", "Two.mp4", "Three.mvk"}
Dim s As String = str(r.Next(0, 3))
e.Node.Nodes.Add(s, s)
e.Node.Expand()
End Sub
End Class
PS - I notice you are adding more and more Images to your ImageList every time you double click on a node. If you just add the Images to it once when the app is loading then you can just use the Image Key to set the correct Image to the newly
added node.
If you say it can`t be done then i`ll try it

How to avoid the selection of a Parent node and its child node at a time?

Example:
consider the below JTree.
Parent1
---->Parent2
-------->Child3
Parent3
---->Parent4
My requirement :
Parent1 and Parent3 can be selected at a time(using ctrl keys)
Parent2 and Parent4 can be selected at a time
Parent1 and Parent2 should not allowed to select at a time.
In general : A parent and any of its child should not be selected at a time.
How to achieve this? Anyone please help me.

Thanikai wrote:
I am very sorry.Whatever for? It's a valid question.
How do i implement a custom TreeSelectionModel?I would start by going through the source of DefaultTreeSelectionModel so see how the default selection is handled. Also probably check out JTree.EmptySelectionModel to see how selection is prevented.
Which methods to override?Methods in the class you choose to extend, obviously. But before that you need to firm up certain design decisions: if a parent node is selected and the user attempts to select one of its child nodes, do you select the child and deselect the parent or do nothing/ and vice versa.
etc.... may form the basis for a future, more specific question accompanied by a [_SSCCE_|http://mindprod.com/jgloss/sscce.html].
luck, db

Jtree Select node and change leafs icon problem

Hi All,
i create a tree and implement a TreeSelectionListener:
my mission is whenever i select a node i need to change the icon of this node (for now.later i will have to find if it have childrens).
import java.awt.Color;
import java.awt.Component;
import java.util.Enumeration;
import java.util.NoSuchElementException;
import java.util.Vector;
import javax.swing.ImageIcon;
import javax.swing.JTree;
import javax.swing.event.TreeExpansionEvent;
import javax.swing.event.TreeExpansionListener;
import javax.swing.event.TreeSelectionEvent;
import javax.swing.event.TreeSelectionListener;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.tree.DefaultTreeCellRenderer;
import javax.swing.tree.TreeModel;
import javax.swing.tree.TreeNode;
import javax.swing.tree.TreePath;
public class TreeView{
     DefaultMutableTreeNode top;
     JTree tree ;
     Color frameColor;
     public static ImageIcon NoTSelIcon;
     public static ImageIcon SelIcon;
    public static String[] name= new String[8];
     public TreeView(Color BackColor) {
          // TODO Auto-generated constructor stub
        top = new DefaultMutableTreeNode("Diagnostics");
        this.frameColor=BackColor;
         SelIcon = createImageIcon("../Resource/Images/Select.gif");
         if (SelIcon == null)
             System.err.println("Tutorial icon missing; using default.");
         NoTSelIcon = createImageIcon("../Resource/Images/NotSelc.gif");
           if (NoTSelIcon == null)
             System.err.println("Tutorial icon missing; using default.");
     public Component createTreeComponents(){
            //Create the nodes.
             createNodes(top);
        //Create a tree that allows one selection at a time.
        tree = new JTree(top);
        //TREE LISTENERS
        //Treeselction listener
        Handler hObject = new Handler();
        tree.addTreeSelectionListener(hObject);
       //Tree expand/collapse listener
        HandlerExpansionListener hObjectExpan = new HandlerExpansionListener();
        tree.addTreeExpansionListener(hObjectExpan);
//       tree.getSelectionModel().setSelectionMode(TreeSelectionModel.DISCONTIGUOUS_TREE_SELECTION);
        //set tree background
        tree.setBackground(frameColor);
         tree.setCellRenderer(new OverrideTreeCellRenderer(frameColor,SelIcon,NoTSelIcon));
        return tree;
      private void createNodes(DefaultMutableTreeNode top) {
             DefaultMutableTreeNode category = null;
             DefaultMutableTreeNode SubCategory = null;
             DefaultMutableTreeNode SubCategoryBasee = null;
             DefaultMutableTreeNode SubSubCategoryBasee = null;
             category = new DefaultMutableTreeNode("Dfe");
             top.add(category);
             //Sub test visible
             SubCategory = new DefaultMutableTreeNode("Test Visible");
             category.add(SubCategory);
             SubCategory.add(new DefaultMutableTreeNode("Son 1"));
             SubCategory.add(new DefaultMutableTreeNode("Son 2"));
             SubSubCategoryBasee = new DefaultMutableTreeNode("Test Base");
             SubSubCategoryBasee.add(new DefaultMutableTreeNode("Grandson 1"));
             SubSubCategoryBasee.add(new DefaultMutableTreeNode("Grandson 2"));
             SubCategory.add(SubSubCategoryBasee);
      class Handler implements TreeSelectionListener {
               public void valueChanged(TreeSelectionEvent arg0) {
                    // TODO Auto-generated method stub
                    System.out.println("treeSelect event ");
                    TreePath trph;
                    trph=arg0.getNewLeadSelectionPath();
                    int count=trph.getPathCount();
                    DefaultMutableTreeNode Selnode = (DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
                    String Name = (String)Selnode.getUserObject();
                    setSelected(Selnode,true);
                    int number_ofnodes=getNodeCountBelow((TreeModel)tree.getModel() , Selnode, false);
                    System.out.println("The Number of nodes under "+Name+"="+number_ofnodes);
                    tree.setCellRenderer(new IconRenderer(SelIcon,NoTSelIcon,frameColor));
      class HandlerExpansionListener implements TreeExpansionListener {
               public void valueChanged(TreeSelectionEvent arg0) {
                    // TODO Auto-generated method stub
                    DefaultMutableTreeNode node = (DefaultMutableTreeNode) tree.getLastSelectedPathComponent();
                    if (node == null) return;
                  }     // The inner class
               public void treeCollapsed(TreeExpansionEvent arg0) {
                    // TODO Auto-generated method stub
                    System.out.println("treeCollapsed event ");
               public void treeExpanded(TreeExpansionEvent arg0) {
                    // TODO Auto-generated method stub
                    System.out.println("treeExpanded event ");
      /** Returns an ImageIcon, or null if the path was invalid. */
         protected static ImageIcon createImageIcon(String path) {
              //ImageIcon imcon= new ImageIcon(path);
              //return imcon;
             java.net.URL imgURL = TreeView.class.getResource(path);
             if (imgURL != null) {
                 return new ImageIcon(imgURL);
             } else {
                 System.err.println("Couldn't find file: " + path);
                 return null;
         DefaultMutableTreeNode newnode;
         public void setSelected(DefaultMutableTreeNode Selnode ,boolean isSelected)
                Enumeration Enchilds=Selnode.children();//ENUMRATE ALL CHILDS FOR THIS NODE
             if (Enchilds != null)
                  while (Enchilds.hasMoreElements())
                       newnode=(DefaultMutableTreeNode)Enchilds.nextElement();
                       String NameSel = (String)newnode.getUserObject();
                       setSelected(newnode,isSelected);
         //GETTING THE TREE DEPTH
         public int getNodeCountBelow(TreeModel model, Object node, boolean includeInitialNode)
             int n = includeInitialNode ? 1 : 0;
             for (int i = 0; i < model.getChildCount(node); i ++)
                 n += getNodeCountBelow(model, model.getChild(node, i), true);
             return n;
import java.awt.Color;
import java.awt.Component;
import java.util.Enumeration;
import java.util.NoSuchElementException;
import javax.swing.Icon;
import javax.swing.JTree;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.tree.DefaultTreeCellRenderer;
public class IconRenderer extends DefaultTreeCellRenderer {
     private static final long serialVersionUID = 1L;
     Icon SelectedIcon;
     Icon NotSelectedIcon;
     Color BackgroundColor;
     boolean Selected=false;
     boolean Leaf=false;
     boolean IsItaChild=false;
     DefaultMutableTreeNode SelctedNode=null;
    public IconRenderer(Icon SelIcon,Icon NoTSelIcon,Color Bacground) {
         SelectedIcon = SelIcon;
         NotSelectedIcon = NoTSelIcon;
         BackgroundColor=Bacground;
         setBackgroundNonSelectionColor(BackgroundColor);
    public Component getTreeCellRendererComponent(JTree tree,Object value,boolean sel,boolean expanded,
                                                    boolean leaf,int row,boolean hasFocus)
         super.getTreeCellRendererComponent(tree, value, sel,expanded, leaf, row,hasFocus);
         Selected=sel;
         Leaf=leaf;
         DefaultMutableTreeNode node = (DefaultMutableTreeNode) value;
         String s2 = (String)node.getUserObject();
   return this;
}my problem is :
when i select a node the the method "getTreeCellRendererComponent"
start to run on the entire tree from buttom to top and than from top to buttom.
for me it waste of time because if has say 100 nodes it wont botthers me.
but i have 20000 nodes and more its take a time.
and for all this nodes i have to make compares.
is there a way to force the DefaultTreeCellRenderer to not run the entire tree???
Thanks

You need to make sure that your TreeModel interprets your group nodes to be non-leaf nodes (one of the methods in the TreeModel interface is called isLeaf). If you are using a DefaultTreeModel with DefaultMutableTreeNode objects, you can use the askAllowsChildren property of DefaultTreeModel and the allowsChildren property of DefaultMutableTreeNode to control this. See the API for more details:
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/tree/DefaultTreeModel.html
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/tree/DefaultMutableTreeNode.html

Adding Node and Deleting Node in Tree

Hi,
I am building a tree dynamically.
I have a class which has set of properties.I am constructing as follows.
public class TreeNode
        public function TreeNode()
     public var friendlyName:String;
     public var icon:Class;
     [Bindable]
     public var children : Array;
     public var logicalName:String;
     public var neType:String;
     [Bindable]
     public var arrayColl:ArrayCollection = new ArrayCollection();
     public function addChild(node:TopoTreeNode):void
         if (this.children == null){
             this.children = new Array();
         children.push(node);
         arrayColl.source = children;
     public function clearChild():void
         children = null;
     public function removeChild(arrayIndex:int):void
         if(children != null)
         children.splice(arrayIndex,1);
         arrayColl.source = children;
Then I set the dataProvider as follows where treeModel is object that is injected.
<mx:Tree id="tree"
             dataProvider="{treeModel.rootNode.arrayColl}"
             labelFunction="{treeModel.getDisplayName}"
             iconFunction="{treeModel.setIcon}"
             width="100%"
             height="95%"
             rowCount="6"
             showScrollTips="true" showDataTips="true" dataTipFunction="{treeModel.getDisplayName}" allowMultipleSelection="true" click="treeModel.displayItemInWorkingView(tree.selectedItems);"/>
TreeModel has the following variables
        [Bindable]
        public var rootNode:TopoTreeNode = new TopoTreeNode(); // this is the rootNode.
        [Bindable]
        public var rootChild:TopoTreeNode = new TopoTreeNode(); // this is the child of the root node..
While constructing the tree, it is working fine.
But after this when i try to add a node (ie adding a node as child to rootNode), it is getting added to my rootNode object but it is not getting displayed
When i click on the items in the tree or click on the drop menu in the tree it is getting displayed.
But i want it to be shown in the tree without clicking anything.
Could anyone help on this?
Regards
Srini

Off the top of my head, you need to call a refresh of some sort, or executeBindings()... something like that.
You will also need to start at the root node and expand any parent branches down to the new leaf.
If you are still having trouble after looking into that, I can try and dig through some of old code and find my solution.

[svn:fx-trunk] 11661: If an item is added to an empty ListBase and requireSelection=true, then select it.

Revision: 11661
Author:   [email protected]
Date:     2009-11-11 10:48:10 -0800 (Wed, 11 Nov 2009)
Log Message:
If an item is added to an empty ListBase and requireSelection=true, then select it.
QE notes: Mustalla tests/gumbo/components/List pass
Doc notes:
Bugs: sdk-24100
Reviewer: Ryan
Tests run:
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-24100
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ListBase.as

includeInLayout="{choicesTilelist.selectedItem.productoptiona != '' }"
would work..which one is the data provider for the tilelist??? XML or the array collection???
you can do
includeInLayout="{data. productoptiona !=''}"      wat ever is the logic behind it...
if you post more code that can help us to imagine more clearly...

How to increment array that contains two clusters whose visibility is controlled by a visible property node and selected by a radio button.

I am trying to use a property node: visible in order to enable or disable one of two clusters. These clusters are in a larger cluster and this larger cluster is in an array. The two clusters are controlled by a radio button (one labeled transistor and the other diode). When diode is selected, the corresponding diode parameters cluster should be visible and when transistor is selected, the corresponding transistor parameters cluster should be visible. In the mean time, the cluster of the device that is not selected should not be visible. There are at least 45 elements in the array (but not more than 45). Data is entered into each cluster (diode or transistor data) for each element in the array via the increment/decrement. The problem is when you select the first radio button (transistor) and enter data, when you increment the array for a new device selection, since a visible property node was used on the cluster, a loop is created where a new cluster is trying to be shown, but the old cluster is also trying to be shown (because it is the one referenced by the property node. How do I get rid of this loop and still be able to increment the array and keep my data intact for future use? Attached is the vi
Attachments:
ChooseScan.vi ‏17 KB

You could try something like this. However, if you know how to use an xcontrol, that would be a better way to implement the above functionality so that these UI characteristics are not a part of your main VI. The problem with the above VI is that you're looping every 100 ms just to update your UI.
Also, try using the "disabled" property node, instead of the "visible" one. That way, the user will still see the options he has but they will be grayed out.
Message Edited by Sudhir Gopinath on 06-25-2007 04:45 PM
S G
Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor
Attachments:
ChooseScan_1.vi ‏19 KB

I'm trying to get organized and I just added a bunch of books and pdfs to my itunes library. They were all added immediately to my ipad and iphone even though, itunes automatically putting books on my idevices

I'm trying to get organized and I just added a bunch of books and pdfs to my itunes library. They were all added immediately to my ipad and iphone even though I did not want this. I added them to itunes using add to library and I have both devices set to sync only selected books.
How do I do this in the future so this doesnt happen? Its a lot of work to now manually erase them from each device and it sent my phone over capacity.
thanks

I dont see the difference in the posts. I dont think theres anything inaccurate or misleading about what I wrote. The items were immediately added to my ipad and my iphone, even though I have them both set to sync only select items. As soon as I added new titles to my itunes library, they were immediately added to the devices. Not on the next sync. Immediately. Both devices were plugged into the computer at the time. Sorry if I failed to mention they were plugged in but I dont see the signifigance youre making out of it. The problem persists anyway.
Now that I did a test without the devices plugged in, the new items were still added as soon as I plugged my devices into the computer ( I do not have them set to sync over wifi).
Since I have both devices set to manually select items to sync, of course I want to manually select new items to sync. For instance, I am not going to read any of these magazines or books on my phone, ever, and I dont want to waste valuable space with them.
So I'm trying your advice:
I just tried deselecting sync books. It erased all content from ibooks on my device. I then dragged
one title onto the device, and it just goes back to syncing select books, with the one title selected.
It appears that wont work to solve my issue. The next time I add something to itunes it will be put on my phone. Is this really something most people want? To select to manualy control what content is synced, but then have things automatically added. It seems inconsistent to me.

Strange behaviour with ActiveX invoke node and Excel

I want to send a table of numbers from LV50.1f to Excel97. After getting a
reg to Excel8.Application I retrieve the Workbooks property, Invoke Item to
select a certain Workbook reference, retrieve the Worksheets collection
reference, Invoke Item and then get a reference to WORKBOOKS again.
Strangely, there is an example code from the NI web site that does exactly
the same, but in the last step a variant is returned in stead of a
reference, which is converted using Variant to G to a Worksheet reference.
when I copied that last invoke node to my VI I also had a variant returned,
so on one diagram I had to invoke nodes connected to the same sources, one
returning a ref, the other returning a variant!
Disco
nnecting the sources to my Invoke node and rewiring gave no change.
Also type casting the ref to workbooks to a worksheets ref, didn't work - I
get errors in the following property node that retrieves a Range - which
exists in Worksheet, but not in Workbooks.
Appearantly, LV gets the returned type mixed up sometimes, and there is no
way to fix it other then copying a invoke node from another diagram?
Finally I got it working though, but this behaviour puzzles me. Contrary to
the example from NI, I now managed to send a table (2d array of strings) in
one call to Excel (don;t need to loop over cells or columns).
PS
I used to do the same using DDE but ranges are different for each language
version of Excel (i.e. R1C1 for English and R1K1 for Dutch), so my VI's need
to know the language of Excel. Also with NT and Win98, getting a DDE
connection often hangs LV. But a big progress has been made - now I need
different VI's for each version of Excel!!!
Ferry Toth
Enraf BV, The Netherlan
ds

Hi Enric,
Can you try your queries again using the new release of DB XML? It contains some improvements in this area.
http://www.oracle.com/technology/software/products/berkeley-db/xml/index.html
John

Move node and its silings from one jtree to another

Hi,
I am trying to move JTree nodes and its siblings from one JTree to another. If anyone has the code, please post it on the website or mail to [email protected]
Thanks
Pavan

Pavan,
You may have to do a sanity check before adding it.
Better run the program in a debugger and have a break point at the clipBoard.put() line. Else system.out.println() lines will kill enormouse programming time rather than using debugger.
Also in following this thread, i found that you may have to be bit more thorough with the DefaultMutableTreeNode class first.
Thanks,
ananth
Thomas,
for (int p = 0; p < jtree.getSelectionCount(); p++) {
               System.out.println(".3.......p= "+p);
node =
=
(EuamDefaultMutableTreeNode)paths[p].getLastPathCompon
nt();
                    clipBoard.put(node.toString(), node);
               System.out.println(".4...........");
Giving error at clipBoard.put()
line....java.lang.NullPointerException
..Any idea why?
Thanks.
Pavan

How do I use For loop to check each node and import them to a new document?

In my function I would like to use a For loop to get all the statutes (xml) inside the object
objXmlBcaResponseDoc. In my case there are 2 statutes. I would like the output to look like the one I have posted here below. I am not sure how to do the For loop. The commented For loop is from another function but it is not working inside
this function.
The output is added into the **objXmlResponseMessageDoc** object and should look like this with 2 statutes (ns1:Statute) and a totalCount=2
<BasicSearchQueryResponse xmlns="http://crimnet.state.mn.us/mnjustice/statute/service/4.0">
<StatutesXml>
<Statutes runType="Request" runDateTime="2015-03-17T10:23:04" totalCount="2">
<ns1:Statute xmlns:ns1="http://crimnet.state.mn.us/mnjustice/statute/messages/4.0">
<StatuteId xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">8471</StatuteId>
<Chapter xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">60</Chapter>
<Section xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">55</Section>
<Subdivision xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0"/>
</ns1:Statute>
<ns1:Statute>
<StatuteId xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">9722</StatuteId>
<Chapter xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">90</Chapter>
<Section xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">25</Section>
<Subdivision xsi:nil="true" xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0"/>
</ns1:Statute>
</Statutes>
</StatutesXml>
</BasicSearchQueryResponse>
My xml doc is found inside objXmlBcaResponseDoc Here is xml inside
objXmlBcaResponseDoc object
<BasicSearchQueryResponse xmlns="http://crimnet.state.mn.us/mnjustice/statute/service/4.0">
<ns1:Statutes xmlns:ns1="http://crimnet.state.mn.us/mnjustice/statute/messages/4.0">
<ns1:Statute>
<StatuteId xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">8471</StatuteId>
<Chapter xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">60</Chapter>
<Section xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">55</Section>
<Subdivision xsi:nil="true" xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0"/>
</ns1:Statute>
<ns1:Statute>
<StatuteId xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">9722</StatuteId>
<Chapter xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">90</Chapter>
<Section xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">25</Section>
<Subdivision xsi:nil="true" xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0"/>
</ns1:Statute>
</BasicSearchQueryResponse>
Here is my function
Function GetStatutesByChapter(ByVal aobjXmlGetStatuteRequestNode As XmlNode, ByVal aobjXMLNameSpaceManager As XmlNamespaceManager, ByVal aobjBroker As ServiceCatalog.Library.v4.Broker) As XmlDocument
Dim objXmlRequestMessageDoc As XmlDocument
Dim objXmlResponseMessageDoc As XmlDocument
Dim intCount As Integer
aobjBroker.PostMessageWarehouseInformationalMessage("Chapter found.", 1)
objXmlResponseMessageDoc = New XmlDocument
'Add the first element into the document GetStatuteByChapter with its namespace
objXmlResponseMessageDoc.AppendChild(objXmlResponseMessageDoc.CreateElement("BasicSearchQueryResponse", "http://crimnet.state.mn.us/mnjustice/statute/service/4.0"))
'Build the initial response document
objXmlResponseMessageDoc = New XmlDocument
'Add the first element into the document GetStatutesResponse with its namespace
objXmlResponseMessageDoc.AppendChild(objXmlResponseMessageDoc.CreateElement("GetStatutesResponse", "http://www.courts.state.mn.us/StatuteService/1.0"))
'Add a child node to the GetStatutesResponse node
objXmlResponseMessageDoc.SelectSingleNode("ss:GetStatutesResponse", aobjXMLNameSpaceManager).AppendChild(objXmlResponseMessageDoc.CreateElement("StatutesXml", "http://www.courts.state.mn.us/StatuteService/1.0"))
objXmlResponseMessageDoc.SelectSingleNode("ss:GetStatutesResponse/ss:StatutesXml", aobjXMLNameSpaceManager).AppendChild(objXmlResponseMessageDoc.CreateElement("Statutes", "http://www.courts.state.mn.us/StatuteService/1.0"))
'Convert the node Statutes into an element and set the runType attribute (runType="Request") by adding it's value Request
CType(objXmlResponseMessageDoc.SelectSingleNode("ss:GetStatutesResponse/ss:StatutesXml/ss:Statutes", aobjXMLNameSpaceManager), System.Xml.XmlElement).SetAttribute("runType", "Request")
'Convert the node Statutes into an element and set the attribute (runDateTime="2015-03-05T10:29:40") by adding it
CType(objXmlResponseMessageDoc.SelectSingleNode("ss:GetStatutesResponse/ss:StatutesXml/ss:Statutes", aobjXMLNameSpaceManager), System.Xml.XmlElement).SetAttribute("runDateTime", Format(Now, "yyyy-MM-ddTHH:mm:ss"))
'Create the BCA request message
objXmlRequestMessageDoc = New XmlDocument
objXmlRequestMessageDoc.AppendChild(objXmlRequestMessageDoc.CreateElement("ns:BasicSearchQueryRequest", aobjXMLNameSpaceManager.LookupNamespace("ns")))
objXmlRequestMessageDoc.SelectSingleNode("ns:BasicSearchQueryRequest", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns1:BasicSearchCriteria", aobjXMLNameSpaceManager.LookupNamespace("ns1")))
objXmlRequestMessageDoc.SelectSingleNode("ns:BasicSearchQueryRequest/ns1:BasicSearchCriteria", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns2:Chapter", aobjXMLNameSpaceManager.LookupNamespace("st")))
objXmlRequestMessageDoc.SelectSingleNode("ns:BasicSearchQueryRequest/ns1:BasicSearchCriteria", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns2:Section", aobjXMLNameSpaceManager.LookupNamespace("st")))
objXmlRequestMessageDoc.SelectSingleNode("ns:BasicSearchQueryRequest/ns1:BasicSearchCriteria", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns2:Subdivision", aobjXMLNameSpaceManager.LookupNamespace("st")))
'Uncomment last working section below
objXmlRequestMessageDoc.DocumentElement.SelectSingleNode("ns1:BasicSearchCriteria/st:Chapter", aobjXMLNameSpaceManager).InnerText = aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Chapter", aobjXMLNameSpaceManager).InnerText
'check if there is a section and or subdivision if it is there then set the value
If Not (aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Section", aobjXMLNameSpaceManager) Is Nothing) Then
objXmlRequestMessageDoc.DocumentElement.SelectSingleNode("ns1:BasicSearchCriteria/st:Section", aobjXMLNameSpaceManager).InnerText = aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Section", aobjXMLNameSpaceManager).InnerText
End If
If Not (aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Subdivision", aobjXMLNameSpaceManager) Is Nothing) Then
objXmlRequestMessageDoc.DocumentElement.SelectSingleNode("ns1:BasicSearchCriteria/st:Subdivision", aobjXMLNameSpaceManager).InnerText = aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Subdivision", aobjXMLNameSpaceManager).InnerText
End If
'check if there is a section and or subdivision if it is there then set the value
aobjBroker.PostMessageWarehouseSnapshot(objXmlRequestMessageDoc.OuterXml, "Request Message", 1)
'Call the BCA service
intCount = 0
'This is where I want to use a For loop to check for the statutes found using the Chapter
'Loop through each Id
'For Each objXmlStatuteIdNode In aobjXmlGetStatuteRequestNode.SelectNodes("ss:Statute/ss:StatuteId/ss:Id[string-length(.)>0]", aobjXMLNameSpaceManager)
'Create the BCA request message
'objXmlRequestMessageDoc = New XmlDocument
'objXmlRequestMessageDoc.AppendChild(objXmlRequestMessageDoc.CreateElement("ns:SingleStatuteRequest", aobjXMLNameSpaceManager.LookupNamespace("ns")))
'objXmlRequestMessageDoc.SelectSingleNode("ns:SingleStatuteRequest", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns:statuteId", aobjXMLNameSpaceManager.LookupNamespace("ns")))
'objXmlRequestMessageDoc.DocumentElement.SelectSingleNode("ns:statuteId", aobjXMLNameSpaceManager).InnerText = objXmlStatuteIdNode.InnerText aobjBroker.PostMessageWarehouseSnapshot(objXmlRequestMessageDoc.OuterXml, "Request Message", 1)
'intCount = intCount + 1
'objXmlBcaResponseDoc = New XmlDocument
'File name is BCASearchQueryResponse.xml
'objXmlBcaResponseDoc.Load("\\j00000swebint\mscapps\deve\appfiles\temp\BCASearchQueryResponse.xml")
'objXmlResponseMessageDoc.DocumentElement.SelectSingleNode("ss:StatutesXml/ss:Statutes", aobjXMLNameSpaceManager).AppendChild(objXmlResponseMessageDoc.ImportNode(objXmlBcaResponseDoc.DocumentElement.SelectSingleNode("ns1:Statute", aobjXMLNameSpaceManager), True))
'Next
'Count how many Statute nodes found
CType(objXmlResponseMessageDoc.SelectSingleNode("ss:BasicSearchQueryResponse/ss:StatutesXml/ss:Statutes", aobjXMLNameSpaceManager), System.Xml.XmlElement).SetAttribute("totalCount", CStr(intCount))
Return objXmlResponseMessageDoc
End Function

What is XPath and what does it do that you're impressed with?
Yes, I see your link, but give me the abbreviated elevator speech on what it is please. It has me curious.
http://searchsoa.techtarget.com/definition/XPath
http://www.techrepublic.com/article/easily-navigate-xml-with-vbnet-and-xpath/
http://www.techrepublic.com/article/using-xpath-string-functions-in-xslt-templates/
The way that all this is being used by me now on a project is the HTML controls on the screen are built by XML not only about what the controls are and their attributes, but the data from from the database is XML too with both going through transfermations
vis XSLT as the HTML controls are built dynamically by XML data for the controls and the XML database data with decision being made in the transfermation on the fly.
There are many usages with Xpath not just this one I am talking about with Xpath. You can do the same kind of thing with XAML and WPF forms as they are dynamically built. But it goes well beyond what I am talking about and the usage of Xpath. Xpath 3.0
is the latest version.
http://www.balisage.net/Proceedings/vol10/html/Novatchev01/BalisageVol10-Novatchev01.html
Thanks - I'll look into that at some point.
Still lost in code, just at a little higher level.

Error "Lead selection not set for context node"

Hi everyone,
I've got a Tree control in WebDynpro ABAP and I've implemented an "expand all" button.
Here's the coding:
METHOD expand_node_rec.
DATA lo_el_child TYPE REF TO if_wd_context_element.
DATA lo_node_children TYPE wdr_context_child_map.
DATA wa_lo_node_children LIKE LINE OF lo_node_children.
DATA lo_nd_child TYPE REF TO if_wd_context_node.
DATA lo_kschl TYPE klschl.
DATA lv_has_children TYPE boolean.
lo_el_child = node->get_element( ).
lo_node_children = node->get_child_nodes( ).
node->get_attribute( EXPORTING name = 'KSCHL' IMPORTING value = lo_kschl ).
node->get_attribute( EXPORTING name = 'HAS_CHILDREN' IMPORTING value = lv_has_children ).
IF lv_has_children = abap_true.
    node->set_attribute( name = 'IS_EXPANDED' value = abap_true ).
ENDIF.
LOOP AT lo_node_children INTO wa_lo_node_children.
    lo_nd_child = wa_lo_node_children-node.
    me->expand_node_rec( node = lo_nd_child ).
ENDLOOP.
ENDMETHOD.
However I'm getting the error above: "Lead selection not set for context node".
Any suggestions?
Edited by: DEVELOPMENT THEMIS on Jul 7, 2011 6:34 PM

hi developement Themis,
I think u didn't diclare "node" as context node. So declare it as a context node before using as a context node..as below
DATA node TYPE REF TO if_wd_context_node.
or u can use "lo_nd_child " as ur context node in ur program in place of "node"
then I think this error will be removed.
thanks,
simadri

Difference between Interface node and normal node?

What is the main difference between Interface node and normal node?
Cheers
Aisurya.

Hi surya,
Interface node or methods comes into picture whenever you want to use one component as used component. I mean to say
Component usages. If you select node as interface node, it will available in another component so you can use that node or methods.
Normal node means in that component only. Simply we can say for component usages we go for interface nodes.
Cehck This...
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/79/555e3f71e41e26e10000000a114084/content.htm
Cheers,
Kris.

Heirarchy selection adding a + to heriarchy nodes and report

Similar Messages

Maybe you are looking for