Restore from standby
I have a peculiar problem: one of my laptops is doing standalone measurements and may loose AC power. The laptop may have to survive up to 100 hours, and obviously, this can not be acomplished on one battery charge. Therefore I made a pretty nifty tool (with LV) that monitors whether AC is present and switch to a survival mode when it runs on battery. This means I basically set it to standby most of the time. Periodically, I revive from standby to detect if AC is present again. I revive from standby using Windows task scheduler.
And that is the problem: taskscheduler doesn't get the computer out of standby when it was put into standby with my method. And windows built-in power management is not doing the trick quite right either.
Does anyone know how to use labview or windows script to get a computer out of standby?
Thanks!
Karsten,
Thanks, that was the kind of document I was looking for, short of VI's already made to interface with win32.
As far as the project it was intended for, I resorted to a small micro-ATX computer instead. The computer has the necesary BIOS feature "power on after power failure." It senses that power is supplied again and boots. I hope to continue my work on this, though, because it adds great functionality to "in field" laptops.
Similar Messages
-
X200 Ultrabase - USB ports don't restore from standby
XP system. On reopening the X200 when docked in the Ultrabase after going to standby, the USB ports on the Ultrabase do not power up. Any ideas? Is this a hardware fault, or BIOS/power management/drivers.
I am having a problem with my x200s ultrabay that may be similar - the DVD in the ultrabay works only ONE TIME and then dies, and I have to "reseat" it and restart the whole system, then it works ONE TIME, etc. Lenovo Gold is going to send me a replacement DVD drive to see if it is that, but I am starting to think the ultrabases are not so great. When the machine is off the base, it is a great machine. When I put it on the base (to make access to a 22" monitor, full sized keyboard, mouse, scanner, etc.) all sorts of quirks start to happen. At one point when I was really tryng to get the DVD to access, a message about "DVDUSB.[ext]" kept flashing by, but went so fast I couldn't read it; the tech at Lenovo said that the DVD has nothing to do with USB so it is all a mystery. My keyboard/mouse are USB, and they were acting up quite a bit through all of this. Is it possible thhat some recent update screwed thngs up? (I have had the x200 for about 4 weeks and it was acting perfectly until last week).
jeff -
Restore production from standby database
Hi,
I would like to make a standby database for my production database.
But, I have a basic question to restore my production database from standby database. There is a method to make it ?
If I lost all files from production database, how to restore from my standby datase (which become in this case my new production database) ?
thanks in advance for your help.
gnom92.* I make a copy datafiles from my new production database (old standby database) on old production (where crash)
* With my old production database, I make a standby database on new production database (old standby)
* I can close the new production database and open the new standby database in read / write mode, and this is my production database.
* After what I recreate my standby database (old standby,newproduction), or can I return in recover standby mode ?
thank you very much for your patience.
gnom92. -
I got the above error while i restore the standby database using RMAN backu
Dear All,
RMAN> crosscheck archivelog all;
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=14 devtype=DISK
specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
Help need.i take the backup without catalog database.
regards,
DBrman> list backup;
it shows lengthier but i showed only the corresponding
BS Key Type LV Size Device Type Elapsed Time Completion Time
3479 Full 17G DISK 01:29:42 09-FEB-13
BP Key: 3479 Status: AVAILABLE Tag: 09FEB13_FULL_ESMSRV1_DB
Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3479
File LV Type Ckp SCN Ckp Time Name
1 Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3480 Full 17G DISK 01:21:30 09-FEB-13
BP Key: 3480 Status: EXPIRED Tag: TAG20130209T200021
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3480
File LV Type Ckp SCN Ckp Time Name
1 Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3481 Full 4M DISK 00:00:03 09-FEB-13
BP Key: 3481 Status: AVAILABLE Tag: TAG20130209T212205
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
Controlfile Included: Ckp SCN: 1759462488 Ckp time: 09-FEB-13
BS Key Type LV Size Device Type Elapsed Time Completion Time
3482 Full 0 DISK 00:00:01 09-FEB-13
BP Key: 3482 Status: AVAILABLE Tag: TAG20130209T212212
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
SPFILE Included: Modification time: 08-FEB-13
ls -l /oradatabkp
root@drsrv1#ls -l /oradatabkp
total 1108672
drwxr-xr-x 2 ovsd dba 96 Sep 27 2009 alert_bkp
-rw-r--r-- 1 oracle dba 195 Mar 15 2007 create.sql
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 ctrl_bkp
-rw-r--r-- 1 root sys 565114880 Apr 24 2007 drsrv1.tar
drwxrwxrwx 2 root sys 96 Jun 17 2011 drsrv2-ignitebkp
drwxr-xr-x 4 root sys 96 Apr 24 2007 esmsrv1
-rw-r----- 1 root sys 1613824 Feb 22 2007 esmsrv1stby.ctl
-rw-r--r-- 1 esmsrv1 dba 5120 Dec 31 2009 esmtables.dmp
-rw-r--r-- 1 esmsrv1 dba 538 Dec 31 2009 esmtables.log
drwxrwxrwx 4 root sys 8192 Mar 10 2009 export
drwxr-xr-x 8 root sys 8192 Apr 24 2007 finalbackup
-rw-r--r-- 1 oracle dba 3820 Sep 5 2008 invalid.sql
-rw-r--r-- 1 esmsrv1 dba 303104 Dec 31 2009 kirdevports.dmp
-rw-r--r-- 1 esmsrv1 dba 591 Dec 31 2009 kirdevports.log
drwxr-xr-x 2 root root 96 Feb 12 2007 lost+found
-rw-r--r-- 1 oracle dba 24954 Aug 9 2009 ovcontrol-090909.ctl
drwxr-xr-x 22 root sys 8192 Apr 24 2007 ovpi
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 pfile_bkp
drwxrw-rw- 4 oracle dba 8192 Feb 10 15:25 rman
drwxr-xr-x 28 root sys 8192 Feb 1 17:15 schedbkp
drwxr-xr-x 2 oracle dba 8192 Jul 11 2011 sdnnm
-rw-r--r-- 1 esmsrv1 dba 2196 Dec 31 2009 srirdevports.log
drwxr-xr-x 2 oracle dba 96 Mar 13 2009 statsreport
-rw-r--r-- 1 oracle dba 966 Mar 15 2007 tbs.sql
drwxr-xr-x 5 oracle dba 96 Mar 16 2007 testov
drwxr-xr-x 2 root sys 442368 Mar 11 2009 trendadm_files
root@drsrv1#ls -l /oradatabkp/rman
total 37244448
drwxr-xr-x 2 oracle dba 8192 Feb 10 15:25 esmsrv1
-rw-r----- 1 oracle dba 19068198912 Feb 9 14:21 esmsrv1_full_db_09feb13
drwxrw-rw- 2 oracle dba 8192 Feb 9 21:36 openview
-rw-r--r-- 1 oracle dba 920442 Feb 9 21:37 rmanbkp-all.log -
So, I made a backup of my device (iPad 2). It was on iOS 4.3.2. I updated to iOS 7. Now, I'm at the default opening screen. I have to choose language, country, then connect to WiFi. After that, it asks me if I want to start new or restore from a backup from iCloud or iTunes. I select iTunes (because my backup is on iTunes), it brings me to the "Connect to iTunes" screen. I restore the iPad, and when the loading is all finshed, I come back to the iPad, and it's back to the default screen! Then I tried again and again. 5 times it didn't work. I also tried putting it in recovery mode prior to restoring, it doesn't work either. Help please?
Restore from iTune Backup
1. Settings>General>Reset>Erase all content and settings
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Select Network and input Password>Join
9. Enable Location Service>Next
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Select Restore from iTune Backup
12. You will see picture of USB cable pointing towards iPad
13. Connect iPad to iTune (make sure iTune is on standby)
14. Tap Continue (computer)
15. Restore iPad from Backup (computer)
16. See progress bar with estimated time (computer)
17. See Restore in Progress on iPad
18. See Apple logo
19. See Apple and Progress Bar
20. Slide to Unlock
21. Copying Apps back to iPad (computer)
22. You'll see Loading/Installing/Waiting below the Apps (iPad)
23. Sync Music/Podcast/Movies to iPad (computer)
24. Sync completed (computer) -
Database restore from old rman backup
Hi Friends,
My database version is oracle 10.2.0 O/s : Windows
I have a production database of an outlet. Yesterday night 11pm they have done some wrong transactions and whole stock is showing wrong.
They have taken a export backup at 9.30 pm and latest archives are there.
We have a rman backup on April-30,2008. when I am trying to restore from the old rman backup the controlfile I am unable to do it.
Can any one of you help me out.
thankyou
satyaHi,
I have tried installing in a seperate system and restore the rman backup, as I do not have the controlfile I have taken a standby controlfile and started restoring the rman backup as the old rman backup dbid is different with the current dbid and giving me following error:
ORA-19870: error reading backup piece D:\MPOUTLET\0AJF4BM3_1_1
ORA-19691: D:\MPOUTLET\0AJF4BM3_1_1 is from different database: id=1976833331, name=JEEVAMP
ORA-19870: error reading backup piece D:\MPOUTLET\0BJF4BOE_1_1
ORA-19691: D:\MPOUTLET\0BJF4BOE_1_1 is from different database: id=1976833331, name=JEEVAMP
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of catalog command at 07/13/2008 12:23:23
RMAN-06209: List of failed objects
RMAN-06211: ==========================
RMAN-06212: Object Type Filename/Handle
RMAN-06213: --------------- ---------------------------------------------------
RMAN-06214: Backup Piece D:\MPOUTLET\0AJF4BM3_1_1
RMAN-06214: Backup Piece D:\MPOUTLET\0BJF4BOE_1_1 -
Shrink Log file in log shipping and change the database state from Standby to No recovery mode
Hello all,
I have configured sql server 2008 R2 log shipping for some databases and I have two issues:
can I shrink the log file for these databases: If I change the primary database from full to simple and shrink the log file then change it back to full recovery mode the log shipping will fail, I've seen some answers talked about using "No
Truncate" option, but as I know this option will not affect the log file and it will shrink the data file only.
I also can't create maintenance to reconfigure the log shipping every time I want to shrink the log file because the database size is huge and it will take time to restore in the DR site, so the reconfiguration
is not an option :(
how can I change the secondary database state from Standby to No recovery mode? I tried to change it from the wizard and wait until the next restore for the transaction log backup, but the job failed and the error was: "the step failed". I need
to do this to change the mdf and ldf file location for the secondary databases.
can any one help?
Thanks in advance,
Faris ALMasri
Database Administrator1. can I shrink the log file for these databases: If I change the primary database from full to simple and shrink the log file then change it back to full recovery mode the log shipping will fail, I've seen some answers talked about using "No Truncate"
option, but as I know this option will not affect the log file and it will shrink the data file only.
I also can't create maintenance to reconfigure the log shipping every time I want to shrink the log file because the database size is huge
and it will take time to restore in the DR site, so the reconfiguration is not an option :(
2. how can I change the secondary database state from Standby to No recovery mode? I tried to change it from the wizard and wait until the next restore for the transaction log backup, but the job failed and the error was: "the step failed". I need to do
this to change the mdf and ldf file location for the secondary databases.
can any one help?
Thanks in advance,
Faris ALMasri
Database Administrator
1. If you change recovery model of database in logshipping to simple and back to full Logshipping will break and logs wont be resored on Secondary server as log chain will be broken.You can shrink log file of primary database but why would you need that
what is schedule of log backup. Frequent log backup is already taking care of log files why to shrink it and create performance load on system when log file will ultimately grow and since because instant file initilaization is not for Log files it takes time
to grow and thus slows performace.
You said you want to shrink as Database size is huge is it huge or does it have lots of free space. dont worry about data file free space it will eventually be utilized by SQL server when more data comes
2. You are following wrong method changing state to no recovery would not even allow you to run select queries which you can run in Standby mode. Please refer below link to move Secondary data and log files
http://www.mssqltips.com/sqlservertip/2836/steps-to-move-sql-server-log-shipping-secondary-database-files/
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Clone from standby ended in ARC: Cannot archive online log based on backup
Hi
I m into scenario where my prod db is in one data center and standby is in other data center.
Both are geographically separated. I have to get a copy of prod on to standby data center side.
Sending data over the network is taking long time either with duplicate db from active db or take backup and copy over standby side and restore it.
so i thought of duplicate db from standby db which is in same data center, using 11g RMAN duplicate from active standby command.
I have simulated scenario which is as below
oracle version 11.2.0.1
os version REHL 5.4
My procedure & parameter are as below.
on standby side from where i m copying (TARGET)
1) on standby
alter database recover managed standby db cancel;
2)alter database convert to snapshot standby;
which gave me
/u01/data/DGSTD/archive/1_152_750425930.dbf
/u01/data/DGSTD/archive/1_153_750425930.dbf
*/u01/data/DGSTD/archive/1_1_752604441.dbf*
*/u01/data/DGSTD/archive/1_2_752604441.dbf*
3) alter database open;
4) alter system switch logfile;
now from rman
RMAN> connect target sys/system@DGSTD
connect auxiliary sys/system@GGR
connected to target database: DGPRM (DBID=578436102)
RMAN>
connected to auxiliary database: NOTREAL (not mounted)
RMAN>
run{
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate channel prmy5 type disk;
allocate auxiliary channel stby1 type disk;
duplicate target database to ggr from active database
spfile
parameter_value_convert='DGSTD','GGR','/u01/data/DGSTD/','/u01/data/ggr/'
set db_file_name_convert='/u01/oradata/DGSTD/','/u01/data/ggr/'
set log_file_name_convert='/u01/oradata/DGSTD/','/u01/data/ggr/'
set 'db_unique_name'='ggr'
set 'audit_file_dest'='/u00/app/oracle/admin/ggr/adump'
set 'sga_max_size'='140m'
set 'pga_aggregate_target'='28940697'
nofilenamecheck;
and when output of rman reaches up below
Starting backup at 31-MAY-11
channel prmy1: starting datafile copy
input datafile file number=00001 name=/u01/data/DGSTD/datafile/system01.dbf
channel prmy2: starting datafile copy
input datafile file number=00002 name=/u01/data/DGSTD/datafile/sysaux01.dbf
in alert log of clone db it gives massive error saying
ARC3: Cannot archive online log based on backup controlfile
ARC2: Cannot archive online log based on backup controlfile
ARC3: Cannot archive online log based on backup controlfile
ARC2: Cannot archive online log based on backup controlfile
and it fill up whole fs. and finally duplicate command throws error.
not sure what i m missing of inside duplicate command or is it valid to duplicate database from snapshot standby.
can somebody light on it please
Edited by: user12281508 on Jun 1, 2011 10:26 AM
Edited by: user12281508 on Jun 1, 2011 10:28 AMduplicate target database to ggr from active database
spfile
parameter_value_convert='DGSTD','GGR','/u01/data/DGSTD/','/u01/data/ggr/'
set db_file_name_convert='/u01/oradata/DGSTD/','/u01/data/ggr/'
set log_file_name_convert='/u01/oradata/DGSTD/','/u01/data/ggr/'
set 'db_unique_name'='ggr'
set 'audit_file_dest'='/u00/app/oracle/admin/ggr/adump'
set 'sga_max_size'='140m'
set 'pga_aggregate_target'='28940697'
nofilenamecheck;
}I think you should use standby cluase as
DUPLICATE TARGET DATABASE TO dup1 FOR STANDBY FROM ACTIVE DATABASE; -
TSPITR using backups from standby
Hi,
I would like to ask for your opinion/advice regarding the following
scenario. We have a primary 10.2.0.3 RAC database which has a physical
standby database, both sites being managed through dataguard. Every
night full RMAN backups are taken for the primary and standby
databases. Between the primary and standby sites we do not have any
shared storage like NFS or SAMBA (because of the problems mentioned
into Note:413098.1).
Now, as far as I know, backups of datafiles/archives taken from the
standby can be used on primary, am I right? So, what I would like to
achieve is to perform a TSPITR of one particular tablespace by taking
a backup control file from the primary but using datafile copies and
archives from the standby. And of course, because I don't want to load
too much the primary, the auxiliary instance should be located on the
standby machine. Is this possible? Has anybody tried this before?
Many thanks!
talek.if you are on 10.2.0.3, check this document and make use of Incrementally Updated Backups: Rolling Forward Image Copy Backup
http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14192/bkup004.htm
You can restore datafiles backedup from physical standby
can restore archivelogs created on physical standby
but can not use control file from standby to recover on primary
You should be able to use bakcup from a physical standby and recover any tablespace in Point In Time on priamry prvovided you have a backup/datafile copy before and archives untill that time. -
When one of my T61 returns from standby it immediately re-enters standby. I can then press the power button or open the lid to have it return from standby again.
Does anyone have a solution to this? I have updated the BIOS and the power management drivers with no effect.Satellite L50D (PSKULU-02M03R)
Very similar to this model.
Satellite L50D-BST2NX2 (PSKULU-03C00U)
Downloads here.
have had to shut down pull battery etc to get to boot up.
You may have a hardware malfunction. Best to restore the hard disk to its original out-of-the-box contents as follows. If the problem persists prior to installing updates, software, or hardware, get a replacement or warranty repair.
Settings > Change PC settings > Update and recovery tab > Recovery tab > Remove everything and reinstall Windows
-Jerry -
Error when trying to recover datafile from standby database to primary
hi friends,
getting problem with restoring datafile from backupset taken on standby database to primary database.
os: windows server 2003
db: oracle 11gR1(11.1.0.6)
i've configured standby database on two different hosts.
host1 - primary (db_uinque_name= prod)
host2 - standby (db_uniue_name= prodsby)
I've configure both database with recovery catalog. I take backup on standby database. users' datafile of primary database has been lost.i'm trying to restore from the backupsets taken on standby database.
with the help of - http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJCEFEG
on primary
c:\>rman target sys/password catalog rcat/password
rman>list backup for db_unique_name prodsby;
display the backupsets
rman>restore datafile 4;
Starting restore at 06-NOV-08
starting full resync of recovery catalog
full resync complete
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1051 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/06/2008 12:12:18
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
also use to tag to restore the datafile
rman>restore datafile 4 from tag='base0_prodsby';
Starting restore at 06-NOV-08
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/06/2008 11:27:21
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
i'm getting above errors when try to restore the datafile.
when i issue the following command.
BACKUP AS COPY DATAFILE 4 AUXILIARY FORMAT 'C:\app\Administrator\oradata\prod\USERS01.DBF';
Starting backup at 06-NOV-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1068 device type=DISK
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=C:\APP\ADMINISTRATOR\ORADATA\prod\USERS01.
DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/06/2008 12:49:
15
ORA-17628: Oracle error 19505 returned by remote Oracle server
please friends, try to help me to solve the problem.
Thanks,
Vihanghi.
Its not necessary its a otherway around to recover datafile from this backupset and apply archivelogs to make datafile consistent.
yes, it ain't the right way to restore backup to primary location.
so how would i connect to standby database with primary and recovery catalog.
i need to connect to recovery catalog and primary site because i need to restore to primary location and recovery catalog contain all metadata and backupsets related information.
i also tried the following steps from oracle documentation.
Connect to the standby database as the target database:
CONNECT TARGET sys@standby
You are prompted for a password:
target database Password: password
Connect to the primary database as the auxiliary database:
CONNECT AUXILIARY sys@primary
You are prompted for a password:
target database Password: password
Back up the datafile on the standby host across the network to a location on the primary host. For example, suppose that /disk1/df2.dbf is the name of datafile 2 on the standby host. Suppose that /disk8/datafile2.dbf is the name of datafile 2 on the primary host. The following command would copy datafile 2 over the network to /disk9/df2copy.dbf:
BACKUP AS COPY DATAFILE 2 AUXILIARY FORMAT '/disk9/df2copy.dbf';
Starting backup at 06-NOV-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1068 device type=DISK
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=C:\APP\ADMINISTRATOR\ORADATA\prod\USERS01.
DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/06/2008 12:49:
15
ORA-17628: Oracle error 19505 returned by remote Oracle server
getting this error. -
Wake from standby causes iPod time and date to go whacko
1.1.3 and iTunes 7.6.0.29, XP Pro.
When my ipod touch is connected and my computer wakes from standby, at that time the clock in the ipod is reset to all sorts of funny dates and times.
I cannot find any reference to syncing of the clock or how to turn it off to see how that helps.
Really annoying. Anyone found the same thing or a solution?First I would try restoring it from backup via iTunes
Next would be to restore it to factor defaults/new iPod via itunes.
Last I would make an appointment at the Genius Bar of an Apple store. -
Ipad stuck in restore from backup loop
my son's ipad was having some error messages when plugged in to sync, since we are going on a long road trip, i decided to try to restore from a previous backupo n the computer it is synced to. did so, but is stuck in a continuous backup loop, and doesnt restore games and settings.
how do i get it working and restored correctly before 4 am tommorrow morning?
ipad2, latest OS...Is this how you restore from iTune Backup?
1. Settings>General>Reset>Erase all content and settings
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Select Network and input Password>Join
9. Enable Location Service>Next
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Select Restore from iTune Backup
12. You will see picture of USB cable pointing towards iPad
13. Connect iPad to iTune (make sure iTune is on standby)
14. Tap Continue (computer)
15. Restore iPad from Backup (computer)
16. See progress bar with estimated time (computer)
17. See Restore in Progress on iPad
18. See Apple logo
19. See Apple and Progress Bar
20. Slide to Unlock
21. Copying Apps back to iPad (computer)
22. You'll see Loading/Installing/Waiting below the Apps (iPad)
23. Sync Music/Podcast/Movies to iPad (computer)
24. Sync completed (computer) -
RMAN RESTORE FROM TAPE DIRECTLY
Dear All,
We are in the process of testing the restore functionality of our production Db. The Backup is taken by Rman which is integrated with Netbackp. The backup files are directly going to the Tape storage.
Scenario
1. We need to restore the backup into a different host which doesn't have access to the Netbackup server and Production Db (Its a DR site)(DR excercise).
2. System team can provide the tape on the standby server.
Concerns
1. How can i proceed with restore in the secondary host.
2. Is there any way to read the backup pieces from Tape and catalog it using rman
If any come across this scenario, kindly share me the solution.
Thanks in AdvanceIf it is a NETBACKUP device, you can't restore without NETBACKUP. Well, there have been articles written on howto, but they all seem to end in "I just installed netbackup, imported the tape and restored from there."
I NEVER, EVER backup directly to tape - always to disk - most frequently with enough space to store 2 full backups plus enough archivelog file space to span before and after those backups, then sweep the backup location to tape. Recovering from tape can take 50-150% longer. If you use NETBACKUP, install it where it is needed. Going "cheap" could potentially cost the company more in downtime, than the licenses would have costs. If you NEED data, you NEED licenses to run the tools required to recover from a disaster.
The sad part is that should a catastrophic failure occur, it is usually at the most inopportune time.
Companies should treat their data [required to run their business] with the same security and backup strategies as if it was cash in the bank. I have seen a very large company literally throw away over $8M in unrecoverable orders due to impatience with bringing a system back online and not allowing the proper recovery processes to occur. Not having the proper licenses would fall into this category. Can your company afford to lose $8M in income?
Sounds like your company really needs a Business Continuity Review of your DR processes and procedures.
onedbguru - CISSP. -
IPad 2, restore & setup as new, then restore from backup?
Confused yet? I am!
So here we go, yes, I'm new to the forum, I've had my iPad 2 since Oct. 2011. And No, this problem isn't in my head.
Last week, I finally updated to iOS 5.1.1, and I deeply regret doing so. I had NO issue before the update, and now, my battery is garbage.
I used to be able to go 2 - 3 days before having to charge and that's with an average of 4 hours a day. Now, after just a few hours (5) I have to charge and it takes forever. I've been working with Apple, but they having given me an option I'm happy with.
1) Mail my unit back to them to switch out with a refurb. I am against this option as I like my unit. I didn't originally buy a refurb and I should have to accept one now. The screen on my unit is perfect, no bleed or dead pixels. I've taken immaculate care of mine and I'm afraid I'll get a unit I'm not happy with. Plus, it will be running iOS 6, which I'm not ready for.
Option two is...and this needs to be done whether I return my unit or not, is a restore and setup as new. Which means I would loose all my information buried deep within my apps. This would also install iOS 6 on my unit.
My question is this...
If I do a Restore, Setup as new, can I then go back in and do a restore from back up, to put all my stuff back in its place.
I'd love to hear from anyone that has any insight, suggestions, experience, or comments about this.
How did you handle it?
What was the outcome?
Did you involve Apple in the resolution?
Or,
Is it just not worth dealing with and I should just keep using it until it won't take a charge.
I know there have been a million posts about this, and I've read a lot of them, but I just haven't found a solution yet.
And before anyone states the obvious, ALL locations are off, all email accounts are set to manual, there are no notifications set.
In the past week, I've done 3 reset all settings, drained battery until system shut down, and did an uninterrupted full charge.
I've reset network settings. I make sure apps are closed by double tapping Home button, and done a hard reset by holding power button and home button until apple icon appears. I'm at a loss, and don't know what else to do.First, make sure you are using the most current version of iTunes 11.1.3 (8). Second, what version of iOS 7 was your old phone running, i.e. 7.0, 7.0.1, 7.0.2? If your back-up was made with a version of iOS that is newer than the version on your new phone, it will not sync. For example, if your back-up was of a phone running iOS 7.0.4, and your new phone was running 7.0.2 out of the box, the back up will not sync to the new phone until it is updated to iOS 7.0.4.
Maybe you are looking for
-
BI-IP / Formula navigation attribute
Hi, i have the following problem and hope somebody can help. I have a BI-IP planing function (Fox-Formula) which simply copies the keyfigure Amount from the characteristic company (#) to the characteristic company (8703). { KI_LCCUR, 8703 } = { KI_LC
-
How to update Elements value inside existing xml file
Hi Gurus, Am somehow new to java and working on xml with java, i have a scenario where i want to update the elements of my existing xml file, i know its possible as i have posted one code on this forum which updates the values of the arrtibutes of ex
-
How to make my wifi work . I'm using HP PAvilion G series Windows 7
can somebody teach me how to make my wifi work. The guy from the place where i asked them to fix my laptop told me to download drivers from sites. and he gave me a list of drivers. But i lost it.. but then. I have downloaded almost all except for the
-
Function module for getting ekko ekpo ekbe, eket data for material & plant
Hi experts, I need to get data for me31l transactional data......for that i need ekbe purchasing document and material documents based on given material and plant and posting date or crop..... Please reply as soon as possible.. Thanks
-
DBMS_LOB.instr (looking backwards for a string)
I am trying to find the position of the first instance of a string ('><'), but staring at a position in the CLOB (not the start) and working backwards I thought this may work: num := DBMS_LOB.instr(L_CLOB, '><', 5000, -1); But unfortunately it return