Restore Upgrade issue
Dear All,
let me explain my current situation
we have 2 server, one is running SQL Server 2008 (32 bit) and the others running SQL Server 2012 (64 bit).
when we try to backup restore the data from SQL Server 2008 (32 bit) to SQL Server 2012 (64 bit), we found that restoring process was not going so well, some of the database access, schema, was not restored well, so we have to running the script
manually to complete the back up process.
i just want to ask, is it possible that issue was caused from difference version (2008(32 bit) --> 2012(64 bit)) or is it caused by platform difference (32 to 64 bit) ?
could some on ehelp me figure it out and explain it to me, why it could happen?
thank you so much
Best Regards,
Bambang
>>> some of the database access, schema, was not restored well,
Can you expand on above? If you issue native BACKUP DATABASE command there is no way to restore the database partially? Perhaps your backup appends the files and you
restore a previous version where there was no schemes?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence
Similar Messages
-
Special Patch for 10.2 in order to do an rman restore upgrade to 11gR2
Am about to start on the 11gR2 upgrade process and was talking with some dba-friends in other companies to learn what not to do , etc. I had mentioned that I wanted to do an RMAN restore then alter resetlogs upgrade and let the upgrade process automatically take me to 11gR2. He mentioned that he had tried that but had run into an rman error when 10g did not have some table in the data dictionary, but there should be a patch for that. Essentially he said the patch would put the pre-11g table needed for an rman restore upgrade. He didnt have the information available and has yet to get back to me, and I have searched metalink looking for it with no luck.
Has anyone else hit this error and could provide either the metalink article, however , better the patch number i need. I will be going from 10.2.0.3 to 11gR2 via an rman restore to a remote system and then issuing an alter ....resetlogs upgrade command.
Thanks in advance
Ed GrimmI am not an RMAN expert, but pl see if MOS Doc 790559.1 (RMAN Restore of Backups as Part of a Database Upgrade) can help
HTH
Srini -
Upgrade issues OBIEE 10g to 11g along with OBIA upgrade
Hi,
I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
1. OBIEE 10g to 11g upgrade issues??
2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
3. Informatica 8.6.1 to 9.0.1 upgrade issues??
4. DAC upgrade issues??
any response for my questions is appreciated.
Thanks
Jay.
Edited by: Jay on Apr 11, 2012 9:11 AMHI Jay,
We cannot explained thread list here, If you get any errors plz post me,will try to help out.
This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
Award points it is useful.
Thanks,
satya -
Report generation toolkit upgrade issues
I have created multiple vi's in that utilize the previous report generation toolkits specifically using the Generate Report Get Data to Modify.vi and the Generate Report Set Modified Data.vi. Obviously the report reference has now changed in 8.6's version of the report generation toolkit and these vi's do not exist in the 8.6 library anymore. What vi's do I need to replace these functions with to make this code work. Can anyone tell me what the work around is to solving this problem. This is a picture of the code.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor
Attachments:
code.JPG 92 KBHi BJD1613,
The Report Generation VIs on the LabVIEW Palettes mutate properly. However, you may run into upgrade issues if VIs distributed with LabVIEW, but not available in the Palettes are used in the code. Hence, I would caution against using them for the same reason.
In this case, the specific references do exist in the report generation classes; however, since they are private, they cannot be accessed by VIs outside the respective classes. A temporary workaround for now is mentioned in the following KB 4OOCSJ4M Getting References in Report Generation Toolkit 1.1.3 with LabVIEW 8.6.
This was reported to R&D (CAR# 123064) for further investigation -
EHP Upgrade Issue - Java Stack
Hi,
Our Source System at NW 7.0 SP13 and we are upgrading the system to EHP1 SP03.
Upgrade failed at Downtime > DEPLOY_ONLINE_DEPL phase.
Error log:
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error
JSPM version is 7.01.3.0.15. Current JSPM log directory is /usr/sap/XPD/JC00/j2ee/JSPM/log/log_2009_09_09_16_09_42.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:698) [Thread[main,5,main]]: The deployment of the queue failed.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file /usr/sap/trans/EPS/in/XPD.xml.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
Sep 9, 2009 10:11:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
Sep 9, 2009 10:11:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/09/09 22:09:42.
Sep 9, 2009 10:11:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/09/09 22:11:51.
Sep 9, 2009 10:11:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:02:08.248.
Sep 9, 2009 10:11:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
I went through the following link , proceeded with option 2, But still getting same error.
Portal Upgrade Issue
Please advise the resolution for the issue I have.
Thanks in advance
Regards
Srinivas
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AMIssue resolved
-
Hi,
We're currently on 4.6b and going to upgrade to ECC6 with unicode I'm trying to compile a list point taken care converting to unicode from ABAP technical point of view. Does anyone have such a list?
Some points i shortlisted are :
1) Use GUI_UPLOAD and GUI_DOWNLOAD rather than WS_UPLOAD and WS_DOWNLOAD.
2) Structures or table headers that contain non-character data need to be identical when moving, comparing, selecting into, updating from, etc.
3) OPEN DATASET filename IN TEXT MODE FOR INPUT ENCODING DEFAULT.
I know there are others. Any help would be appreciated.
aRsCheck the below links
http://www.sapfans.com/forums/viewtopic.php?t=268386&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=263434&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=261051&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=253316&highlight=upgrade+issues -
Grrr. I switched out my iPad mini today. For my 2 magazine subscriptions, I entered my log in information. Then I clicked link for 'restore past issues.' I was then prompted for my Apple ID and pw. I'm repeatedly getting message that my ow is incorrect, which it's not. Help!
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom -
Errors in Forte 3.5 -Upgrade issue
hello ,
We are having a frequent disruption in the communication SO which has an
externalConnection Class. Did anything change in 3.5? We did not have
these errors in 3L!
After these erros, we have a mutex locking problem which leaves our
application hanging.
Any help will be greatly appreciated!
thanks
suma
Here is an Excerpt of the log file
Task 9: extConn4030a808.Write: 194 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
Task 9: extConn4030a808.Write: 233 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:47
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:47
regards,
Suma Venkatesh-----Original Message-----
From: Venkatesh, Suma
Sent: Thursday, May 24, 2001 2:39 PM
To: '[email protected]'
Subject: Errors in Forte 3.5 -Upgrade issue
hello ,
We are having a frequent disruption in the communication SO which has an
externalConnection Class. Did anything change in 3.5? We did not have
these errors in 3L!
After these erros, we have a mutex locking problem which leaves our
application hanging.
Any help will be greatly appreciated!
thanks
suma
Here is an Excerpt of the log file
Task 9: extConn4030a808.Write: 194 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
Task 9: extConn4030a808.Write: 233 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:47
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:47
regards,
Suma Venkatesh -
hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on
iPhone 4Soenkz33 wrote:
this does not help at all for the second owner, after making the first owner id with careless, sorry for my english ...
Careless? Possible, but unlikely. Most likely the phone was stolen from the first owner. It would be a VERY careless iPhone owner who did not erase their personal information from a phone before selling it, and to do that it is necessary to disable Activation Lock. In most places in the world knowingly using stolen property is a crime, so the fact that the phone doesn't work may be the least of one's risks. -
R12 upgrade issue:Not able to login using forms:Please help****urgent
We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
Any help to resolve this issue will be appreciated.Duplicate thread ...
R12 upgrade issue:Not able to login to forms**please help
Re: R12 upgrade issue:Not able to login to forms**please help -
ECC 6.0 EHP-4 upgrade Issue in phase MAIN SHDRUN/ALTNTAB FILL were negative
Hi Basis Expert,
while doing ECC 6.0 EHP-4 Upgrade in MAIN_SHDRUN/ALTNTAB_FILL phase we are getting the following issue please help us.
Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
Last error code set: BATCH JOB RDDNT2MT FAILED: Error(s) found in the log(s), accumulated in "ALTNTFI.ELG".
We check the shadow instance is up and we can log in to the system. Check ST22 and SM21 notice no error.
Check the JOB RDDNT2MT (SM37) successfully running and all the job finish without any error.
Hope anybody can share a bit your experience on this issue. we try search the note and find the forum but no luck.
ThanksHi,
> 2EETG011 "No shadow system""(environment parameter)""auth_shadow_upgrade"
> 2EETG011 "No shadow system""DB-connect not against shadow tables !"
>
It looks from your log that shadow system is not able to connect to database. Please check your shadow system. Check below link as well:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/ecc-6-upgrade-issue-in-phase-altntab_fill-1556272
Thanks
Sunny
Edited by: Sunny Pahuja on Oct 15, 2010 1:27 PM -
Hi All,
I was wondering if anyone had a list of Upgrade issues (most likely, from ticketting system) to the 5.0 system.
ThanksHi mark,
Can u please send me the upgrade issue list to this email address
[email protected] -
IDSM-2 - upgrade issue - 5.x to 6.x
Hello All,
I have an issue upgrading the IDSM-2 module I'm playing with.
It is currently running version 5.0(2).
The thing is when I try to upgrade the image to the latest 6.x version using the .bin.gz file, I get the follwing error message :
The filename IPS-IDSM2-K9-sys-1.1-a-6.1-2-E3.bin.gz is not a valid upgrade file type.
Continue with upgrade? []:
There is no image file that is not .bin.gz on the download section of the website. Only recovery images have the .pkg extension.
Does anybody how to troubleshoot this simple(I guess) upgrade issue?
Regards,
Thibault.You are trying to "upgrade" using a "System Image" (-sys-) file instead of an Upgrade file.
The upgrade file for the IDSM-2 is the standard upgrade file used across almost all IPS/IDS models:
IPS-K9-6.1-2-E3.pkg
It can be downloaded here:
http://www.cisco.com/cgi-bin/tablebuild.pl/ips6 -
Frustrating Phone Upgrade issue
We need help with phone upgrade issue we encounter when BestBuy associate process our upgrade. Associate is saying we are not eligible but we have not done any phone upgrade since Jan 2011. Our ATT mobile service was established with BB in 2009 and we only upgraded 2 phones in Jan 2011 thru BB. The only recent change in January 2013 was a change of responsibility between my spouse and me since my company has a better employer discount thru ATT. No change and per ATT, no contract and we should be able to upgrade in any retail store. But BB keeps telling us we have issue with ATT and can do our upgrade only with ATT Corporate Store. Our mobile account is a regular family plan account as originally established with BB and just like any BB customer, have employer's discount attached. I don't understand how BB system communicates with ATT system so it is hard for me to explain to ATT what "error message" BB associate is receiving. It has become so frustrating with BestBuy telling us to check with ATT and then for ATT to tell us that there is no issue at their end. We have been a loyal BB customer with all major appliances bought from them including protection plan. The least they can do is work with their ATT representative to figure out between themselves what the issue is. Here we are willing to give both companies our business with new phones and new contracts and no one can help us out.
LTGee -
I am very sorry to hear about this. I am going to send you a Private Message to collect some information from you to see if we can get to the bottom of this. To check your private messages, ensure you are logged into the forum and click on the envelope on the upper right hand side of the forum.
Thanks!
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message -
HR - PA upgrade issue (4.6C to ECC6.0)
dear all,
we are currently in the process of upgrade from 4.6C to ECC6.0
and we found this minor issue in the submodule PA:
using tcode pa20/pa30 we can not see any record of IT0000 Actions using 'overview'
but the all the detail actions can be displayed..
the overview (mountain icon) can't show all the records- only happen when we want to overview the infotype IT0000 Actions.
but all the details that we have recorded in IT0000 Actions, can still be displayed (using spectacle icon)
this is only happen in IT0000 Actions
all other infotypes can be overviewed using 'mountain icon' and can be displayed using 'spectacle icon' as normal condition.
anyone ever gone through the same issue?
we have updated patch for SAP HR : SP 32 and EA 7.
the authorization is SAP ALL.
looking forward to hearing from you.
best regards,
dhenny muliawaty (pei pei)Hi Abhishek,
thanks for your reply and your guidance..
we need more information from you..
1. how to back up the table, is it right that we need to contact basis and ask our basis guy to back up the tables?
2. after we do the backup of HR table T512W, before upgrading your HR support package, then we upgrade the support package and after that..
is it right that we need to restore the table? or that the back up is use to do cross check on the content of the T512W after upgrade?
V_512W_B Valuation Bases
V_512W_C Averages
V_512W_D Processing Classes, Cumulations, and Evaluation Classes
V_512W_O Complete View T512W
V_512W_T Wage Type Texts
thanks for informing us that it's a standard practice to backup this table before applying the HR patch to system. how do you know this is a standard practice?
do you know any other additional standard practices for HR in upgrade project from 4.6C to ECC6.0?? do you have the link of this complete information?
thank you for your kind attention and support.
looking forward to hearing from you.
thanks and best regards,
dhenny muliawaty (pei pei)
Maybe you are looking for
-
My laptop has recently broke and is not able to use in any way. I had an Ipod and an Ipad both connected to the itunes on this computer and have purchased a new laptop. However, after downloading itunes i tried to sync my devices with it but it told
-
3rd generation iPod touch syncing issues
The last time I tried to sync my iTunes account through a wired connection between my Macbook Pro and 3rd generation iPod touch, I had some major issues. First: It deleted the YouTube, iBooks, Netflix, Dropbox, Facebook, and Kindle apps from my iPod
-
I currently left all Google services I used, Gmail, Chrome, etc.. because of the recent selling info to the gov and what not and although it may or may not be true I am being safe and switched to Firefox and a different email provider. Anyway so far
-
ACE 4710 transparent LB with two Caches and two routers.
Hello, I have ACE 4710 that load balance two cach flows (bluecoat), i am doing pbr on the routers to send the traffic destined to port 80 to ACE then Cach farm. After that the Cach flow will get the page from the internet via two routers. The return
-
How can I outline signature pic in Mail
Whenever I put a jpg in mijn signature (preferences) and edit it to outline to the right. It puts the file right in the signature window. Once I close it and start a new mailmessages the jpg is on the left again. Going back to the preferences the jpg