Restoring the value in table- SETLEAF

Dear all,
Kindly help for the below issue.
Due to wrong transport request in production system, all the value in the table - SETLEAF has been over writen. We try to find out the old entry in the table. Is there any way where we can find the old value in the SETLEAF table ?
Thanks in advance.
Regards,
sp sahu

BASIS should be able to load old data. If there is structure change, Data is also temporarily stored for some time in temporary tables - you basis person can reload this data.
I am not sure if these temporary tables are available if it's only data addition / deletion.
Regards,
Mohaiyuddin

Similar Messages

Deleting the values from table control

HI,
I need to remove the selected line from the Table control on my screen.
The point is that the Internal table does not have any records,.
for example in the Customer Create screen,
while entering the bank details we will enter it in a tbale contraol.
but the records doesnt exist in the database. but the record gets deleted from the table control only if we press delete button.
please guide me.
please note : I want to delete the record from Table Control on the screen and I dont have any corresponding database records..
regards

Hi..
The solution to your problem - deleting values from table control.
Here: it_wizard is the internal table which is holding the value of table control.
         wa_wizard is the work are of the internal table it_wizard.
         it_delete is the internal table which holds the deleted record of table control.
         wa_delete is the work area of the internal table it_delete
Also here the field ZSEL is the character field which is used to select the entire record in the table control.
LOOP AT it_wizard into wa_wizard WHERE zsel = 'X'.
       MOVE-CORRESPONDING wa_wizard TO wa_delete.
       APPEND wa_delete TO it_delete.
       delete table it_wizard from wa_wizard.
DELETE FROM zfin_goods WHERE ZFG = WA_delete-ZFG.
ENDLOOP
if sy-subrc eq 0.
Message 'Delete Successful' type 'S'.
endif.
The above code will delete the record from both the table control.internal table and the database table.
I think this will help you to great extent.
Ward regards,
Bhuvaneswari
Edited by: BHUVANESWARI THIRUNAVUKKARASU on Jan 7, 2009 10:39 AM

In the Value Mapping Table n:1 relations is not allowed???

I'm using Value Mapping but if I try to fill the Value Mapping Table with 2 different source values (e.g AA, BB) and the same one as target (e.g. ZZ) the Integration Builder does not allow it.
I receive the message:
"Rappresentation already exists.
BB | ZZ
AA | ZZ
Do you want to delete it from the existing group and assign it to the current group instead?
Any idea?
Sergio
Message was edited by: Sergio Ferrari

Hi Sergio,
I think it does allow you to have n:1 relations. The error you are getting is because the mapping already exists in another group. You can try to display it to see which group the mapping belongs to.
Nevertheless, since it exists, you do not to enter it again. You are able to use it in your mapping program anyway.
Regards,
Hart

How to get the values from table SKB1 R/3 to SRM

Hi Gurus,
My requirement is to get all the values from the table SKB1 to SRM (i.e. in to an internal table) for doing some validation(G/L account XXXXXX requires an assignment to a CO objectXXXXXX.)
Like wise I have many tables for doing validation in SRM
Help me how to get this, suggest me any Function module with sample code.
OR
Any Standard FM which will give all the values of the fields in the table SKB1 when I pass the key fields G/L account & company code alone so that I can improve the performance.
Suggest me.
Regards
Paul

Hi,
You can use the FM 's META_READ_TABLE Or RFC_READ_TABLE
Which SRM / Backend system version are you using ?
Are you taking care of the Importing paramater - DELIMITER in this case.. ??*
See related links ->
Re: Retrieving data from R/3 into SRM
Re: Product Search TIME lag
Else you can just call the remote enabled FM "BAPI_GL_ACC_GETDETAIL" from SRM.
BR,
Disha.
Do reward points for useufl answers.

How to get the values from table region and how to set

Hi,
I have a requirement as Seeded Page Having One Table Region having around 8 columns, In That Item Description field is there. My Requirement is I need add one more field for that Region and assign the value depending Item Description.
I will create one new Item in that region and will give name as Item, But how to set the values to Item Depending on Item Description.
Is it possible to through CO Extension, If yes..Pls help how to get it.
Thanks in Advance,
Hanimi

Hi Hanimi,
1. You need to extend the VO, add a new Attribute.
2. In VORowImpl of the extended VO, you can find the getter for your new attribute (example getItem())
3. In this getter method you can write some code like:
if("ABC".equals(getItemDescription())
return "XYZ" ;
-Prince
http://princekapoor82.blogspot.com

How to store the value in table

Hi All,
I ve a requirement where im adding a check box on a seeded supplier_create page via personalization. The seeded page contains only a root AM and a root controller.The table which stores the supplier details does not have a dff.so i have to store a yes or no value and a foreign key ref into a custom table to map both the tables. the rootAM is actually calling the underlying seededVO to create a row in the database.Now how can I insert the yes/no and the foreign key values into my custom table??
Thanks.

Isn't there any other column in the table which you can use?
Anyway you can call a PLSQL API (to create a row in the Custom Table and store the value and also to make a foreign key join therein). This PLSQL can be called from the Controller (extend the standard Controller).
Now when you come to the Page, either you substitute the standard VO, or easier still (since I assume checkbox is on the Page and not in the table), you can call a PLSQL function and get the value of the checkbox. May be you can also create a dymanic VO and get the value from the Custom table for the current standard table row.
Please do a compete thinking on the idea above and do let me know where you forsee issues. The above solution focusses more on PLSQL API invocations and thus decreases the need for Substitutions.
Thanks
Sumit

Commit not allowed in Trigger then how to store the values in table

Hi,
Database trigger not allowed to COMMIT in it (directly) or in procedure which is calling from the Trigger. it gives error.
so my question is:-
1)How Database internally store the INSERT AND UPDATE value in table which is written in procedure without COMMIT?
2) Is it necessary to write COMMIT in procedure using PRAGAMA AUTONOMOUS TRANSACTION to store inserted or updated value in table?
Thanks in advance.

Hi,
A trigger is designed to be a part of a transaction, not it's end.
It is like following these steps (not really accurate, but should give an idea):
1. programA issues INSERT statement on tableA
2. 'control' goes over to the database
3. constraint checks happen
4. the associated triggers on tableA do their work (e.g. fetching a sequence value for a primary key)
5. 'control' goes back to programA
6. programA decides if a commit (no error occurred) or a rollback (error case) has to be issued.
Did this help? Probably not, I'm not happy with what I wrote, but anyway... :)

Please help..it's Urgent..How to fetch the value from table row from Page

Hi,
I have created a table with 2 LOV's , LOV2 is dependent on LOV2.
Here I can not use the general Dependent LOV concept, as these values are coming from 2 different LookUps.
I am not able to fetch the user input for LOV1 (from page) .that is why not able to set the where cluse fro 2nd LOVVO.
I have used this code:
if ("ViolationCat".equals(lovInputSourceId)) {
OAMessageLovInputBean msglov =
(OAMessageLovInputBean)webBean.findChildRecursive("ViolationCat");
// String p_violation_category = "'"+(String)msglov.getValue(pageContext)+"'";
String p_violation_category =
(String)msglov.getValue(pageContext);
// System.out.println(" p_violation_category =" +
// p_violation_category);
String v_violation_category = "";
//System.out.println("vcat=" + vCat);
OAViewObject violationVO =
(OAViewObject)am.findViewObject("SNI_Violation_DtlsVO2");
Number vcatViolationIdnum =
(Number)violationVO.getCurrentRow().getAttribute("ViolationId");
String vcatViolationId = "" + vcatViolationIdnum;
pageContext.putTransactionValue("vcatViolationId",
vcatViolationId);
pageContext.putTransactionValue("p_violation_category",
p_violation_category);
String query =
" SELECT LOOKUP_CODE, \n" + " MEANING, \n" +
" LOOKUP_TYPE \n" +
" FROM apps.fnd_lookup_values \n" +
" WHERE LOOKUP_TYPE ='SNI_VIOLATION_CATEGORY' AND MEANING=?";
PreparedStatement ps = txn.createPreparedStatement(query, 1);
try {
ps.setString(1, p_violation_category);
ResultSet rs = ps.executeQuery();
//System.out.println("before while,");
// rs.next();
// v_violation_category = rs.getString("LOOKUP_CODE");
// System.out.println("v_violation_category="+v_violation_category);
while (rs.next()) {
//System.out.println("inside while");
v_violation_category = rs.getString("LOOKUP_CODE");
// System.out.println("v_violation_category=" +
// v_violation_category);
ps.close();
} //try ends
catch (Exception e) {
e.getMessage();
//System.out.println("in catch.." + e.getMessage());
OAViewObject subCatVO =
(OAViewObject)am.findViewObject("SNI_ViolationSubCategoryVO1");
//System.out.println("get VO before where clause: subCatVO::"+subCatVO.getQuery());
subCatVO.setWhereClause("LOOKUP_TYPE like '%SNI_VIOL_SUB_CAT_" +
v_violation_category + "'");
System.out.println("after set where clause VO: subCat VO::" +
subCatVO.getQuery());
subCatVO.executeQuery();
// System.out.println("query of subCat VO::" +
// subCatVO.getQuery());
//End of sub category Validation
It is working fine only for the 1st row of teh table.
I have tried to fetch the value using :
String violationCategory = (String)violationVO.getCurrentRow().getAttribute("ViolationCategory");
String violationSubcategory = (String)violationVO.getCurrentRow().getAttribute("ViolationSubcategory");
But it is fetching null value.
Please tell me how can I able to fetch the values.

Hi
in your scenarion,first u have to identify the particular row of table where the changes is being made ,u have to use this code .when u select the lov ,first it will give the row refernce and then u have to catch the lov event
OAApplicationModule am =
(OAApplicationModule)pageContext.getApplicationModule(webBean);
String event = pageContext.getParameter("event");
if ("<ItemPPREventName>").equals(event))
// Get the identifier of the PPR event source row
String rowReference =
262
pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
Serializable[] parameters = { rowReference };
// Pass the rowReference to a "handler" method in the application module.
am.invokeMethod("<handleSomeEvent>", parameters);
In your application module's "handler" method, add the following code to access the source row:
OARow row = (OARow)findRowByRef(rowReference);
if (row != null)
thanx
Pratap

How to check the value in Table CDPOS

Mostly I can't see the following fields value in the table CDPOS,
(1) CDPOS-VALUE_NEW
(2) CDPOS-VALUE_OLD
In fact, it should have values, so how to check the values, is there any special method needed?
Thanks and best regards.

Ferry Lianto,
Thank you very much for your expertise.
It's helpful to get some contents via FM:CHANGEDOCUMENT_READ_POSITIONS, the problem is, to some kind of DELETION operation, the log in table CDPOS is very simple, I still don't know which contents were deleted even though I found records in table CDPOS.
Is there any other suggestions?
Thanks and best regards.

How to justify the values in table using report generation tool kit

Hi
How can we align the values in excel table using report generation toolkit.
like left,right,center.
Regards,
hari
Attachments:
Report_excel.vi ‏34 KB
New Bitmap Image.JPG ‏134 KB

Hi,
A trigger is designed to be a part of a transaction, not it's end.
It is like following these steps (not really accurate, but should give an idea):
1. programA issues INSERT statement on tableA
2. 'control' goes over to the database
3. constraint checks happen
4. the associated triggers on tableA do their work (e.g. fetching a sequence value for a primary key)
5. 'control' goes back to programA
6. programA decides if a commit (no error occurred) or a rollback (error case) has to be issued.
Did this help? Probably not, I'm not happy with what I wrote, but anyway... :)

Restoring the data from table after deletion

Hi,
If I delete the data from the database (using delete command) , is there anyway to restore that data. I know it looks bit weird but I'm checking whether there is any technique in abap by which we can restore the data.
Your help would be appreciated.
Thanks,
Kranthi.

Hi Kranthi,
When you delete lines of a database table using the DELETE command, the process is only complete after a database commit. Before the commit, any database change can be reset using a database rollback.To be able to perform a database rollback, a database system must generate a copy of each database object before making a change. These copies are kept in a rollback log until the end of an LUW. An overflow of the rollback log always results in the termination of the transaction which caused it. For example, attempting to remind a large number of defaulting customers in the same transaction could trigger such an error. You can only solve this problem by dividing the set of database updates into several smaller units ( LUWs) for the database system. You use this statement if you cannot be certain that all the database changes have been executed correctly.
For your information :
An LUW begins each time you start a transaction,when the database changes of the previous LUW have been confirmed (database commit) or when the database changes of the previous LUW have been cancelled (database rollback)
An LUW ends when the database changes have been confirmed (database commit) or when the database changes have been canceled (database rollback). Within an LUW, database changes are not made until after a database commit. Prior to this, any database change can be canceled by a database rollback.
Cheers
Nishanth

Dynamically changing the value in table control

Hello Every one,
In MD61 transaction table control am trying to change value dynamicaly i.e am trying to change value in table control automaticaly tht value to be captured and i need to show in status bar...
Ex table control field is number: am giving 10,20,30 tht should show in status bar by adding if u enter 10 at status bar it show 10 then when u enter 20 it should add with 10 and give 30 ..
in this way when ever u enter value in filed it should add with the status bar value.

Hi!
For conversion you can use the function module
data :   w_amt         TYPE cms_dte_original_amt,
                                                                                " Amount
            w_conv_amt    TYPE cms_dte_conv_amt,
                                                                                " Converted amount
            w_kmein       TYPE cms_dte_original_curr,
   CALL FUNCTION 'CMS_API_CURR_CONV'
        EXPORTING
          i_original_curr = w_kmein
          i_original_amt = w_amt
          i_result_curr   = 'INR'
          i_rate_type     = 'M'
          i_conv_date     = sy-datum
        IMPORTING
          e_conv_amt      = w_conv_amt.
now accordingly you can move the currency and amount that is changed....
here as you were saying that on f4 after selecting you want the other field to get the value on that currency.....
this work can be done as here....
in this the next field gets populated as the first field gets the value......
refer to it.....
https://wiki.sdn.sap.com/wiki/display/ABAP/GettingainputfieldpopulatedonenteringthevalueinoneInputfield
Regards.

Function module for updating the values in table VTTK

Hi,
I am working on a report in which I need to update the value of field tdlnr of table vttk for a particular shipment number. I need to do this using functional module and I am not been able to find one. If anyone knows answer to this plz help.
Thanks in advance,
Priyanka.

As noted above, RETURN table must be supplied empty, it is for BAPI to return the messages back to the calling program. You simply need to define an internal table, pass it to BAPI as is and then analyze this table after the BAPI call. For example:
DATA: BEGIN OF it_return OCCURS 0.
        INCLUDE STRUCTURE bapiret2.
DATA: END OF it_return.
CALL FUNCTION 'BAPI_SHIPMENT_CHANGE'
<...>
TABLES
<...>
    return = it_return.
LOOP AT it_return.
MESSAGE
       ID      it_return-id
       TYPE    it_return-type
       NUMBER it_return-number
   WITH
               it_return-message_v1
               it_return-message_v2
               it_return-message_v3
               it_return-message_v4.
ENDLOOP.
Hope this helps.

Passing the values to table row with search help

Hello experts,
I was developed one custom component which is displayd in table format.here in one column i was put F4 functionality.whenever the user click on that f4 one pop up window will come with few columns and few records then user selects one row from that pop up window.Now my requirement is whatever the row is selected by user that row will come and set in my table .its very needful..
Regards,
Bixamaiah.

Hi Bussa,
If the field for which you are trying to get F4 help is a context node attribute, its very simple.
First, make sure that the field is an input field.
In the corresponding context node class, implement the get_v method of the attribute. A utility class has been created to simplify the definition of F4 Help -
CL_BSP_WD_VALUEHELP_F4DESCR.
Check out the implementation of this class in any of the standard code, that will guide you. Also, make sure that you have defined the input and output mapping properly.
The input mapping defines the search criteria that is used and output mapping defines in which fields the selected values have to be transferred.
Hope this helps!
Regards,
Padma Guda

Oper Enah Key - Usr06 field - Decimal shift in saving the value AFVU table?

Hi All,
       I have customized a Field key and defined USR06 (currency field) as user field. When I enter a value in this field it is getting saved as divide 10 in AFVU table. viz- when I enter value 500 it is saved as 50.
      Kindly suggest me remedy.
      I am currentyl on version 4.7 and not getting any SAP note for this release.
      I found a note for same issue in PS which is valid for ECC5 and above.(Note - 1179002).
With best regards,
Narendra

Pete,
Already raised the OSS message but waiting for their reply.
With best regards,
Narendra

Restoring the value in table- SETLEAF

Similar Messages

Maybe you are looking for