Restrict access to partition in dual boot- both boots Mavericks no windows

Hello! I am running OSX 10.9.1 and what i have done is partitioned the drive into two halves, with the same os on both. What i want to do is restrict all access /read write to one of the partitions while the other is running the os, and vice versa. I am trying to keep these two halves seperate, so if somthing goes wrong with one, it wouldnt transfer any problems over to the other. Speciffically my DJ Software and Music DAW's on one, and everything else on the other ... Games .. Etc... Is this possible? Thank you.

I'm no expert, but I have a theory, and do let me know if this helps. If anyone knows more, feel free to comment as you probably have more knowledge than me.
For one, I understand that bootcamp partition permissions are dependent upon the format for the partition.
-NTFS does not allow you to modify anything at all/
-FAT32 allows you to modify access permissions, including read and write.
First you should probably re-partition the drive into a FAT32 format so you can actually read and write.
Then, while on an Administrator account, Get Info on the Partition Drive.
Your list of accounts and permissions should be listed below.
You could probably then, when looking at the group "Everyone" you could change the partition to "No Access."
I've noticed you can also add specific accounts onto that list, but that does not allow you to specifically give that person "No Access."
So, I am thinking that you could maybe set "Everyone's" access to No Access, but add Administrators and/or other specific account with Read and Write.
Let me know if you think this could work. I do suggest asking others before doing it though just because I am no expert.

Similar Messages

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Please don't double post. Look at your other thread.
If you want to get rid of Windows and the BC partition use the Boot Camp assistant program to remove the Win/BC partition. Don't do it manually with Disk Utility Use the BC A program.

HOW TO DUAL BOOT W540 with windows 8.1 / 7

I got my W540 recently with windows 8.1 pro on it. but as all engineers worst nightmare windows 8 has hard time with engineering softwares (for my case TIA Portal for PLC programming software which only support windows 7). so i need to have a windows 7. i prefer to keep my windows 8 and have dual boot system with windows 7 added. But i can't install windows 7. initially due to disk type (GPT), then i changed it to MBR without losing my files (which only was possible if i had deleted the recovery partition- now my recovery is on my flash drive). But there are already 4 partitions on the system (1 for C: drive and 3 for recovery and system files which came originally with the product) , how can i install a windows 7? i can't add another partition because that makes my disk a Dynamic disk (which i don't really know what is). all in all, i really need windows 7 on my system ASAP. If anyone know how to fix this please reply. Thanks guys.
Solved!
Go to Solution.

You are limited to four PRIMARY partitions on an MBR disk.
But other than the "active" partition (i.e. the small 100MB "system reserved" partition where Boot Manager is placed from doing a cold Windows install on an empty drive, or the 1.4GB equivalent Boot Manager partition that Lenovo provides along with other tools and utilities), all other partitions on the drive can be "logical". They are not required to be PRIMARY, although Lenovo delivers its partitions that way. But you can change that.
You can have up to 120 LOGICAL partitions on a drive (all of which live inside an originally PRIMARY partition which gets converted to an "extended partition" which houses all of the logical partitions. So if you have at least one logical partition (and thus have to give up one primary partition in order to build that required "extended partitions"), that means you can have up to three remaining primary partitions and up to 120 logical partitions... all on an MBR disk. No "dynamic", and no GPT.
Yes, that means even the Windows system partition itself (i.e. "C") can be on a LOGICAL partition. It's only that one "active" partition (where the BIOS goes to find Boot Manager and its menu, and kick off the rest of the system boot process) which truly must be PRIMARY. That's the only requirement.
So, if you want to use MiniTool's Partition Wizard to carve out sufficient free space for your second Windows 7 partition (by shrinking your existing Win8 partition), you can create one or more logical partitions inside that new free space, and do the Win7 install to one of those empty logical partitions. You can then use a second logical partition in that same free space for "data", if you want.
Note that Partition Wizard can even convert one of your existing primary partitions to logical (i.e. convert it to an "extended partition", inside of which will be then be the original primary partition now converted to logical). You can then shrink or move/resize the partitions on the drive (both primary and logical) however you want, to perhaps make room for additional "logical" partitions inside of that now present "extended partition" which can hold up to 120. You can even convert ALL of your primary partitions except for the one "active" partition (which MUST BE PRIMARY) to logical partitions, which gives you maximum flexibility in having even more than just two bootable OS's along with one or more data partitions, etc., up to 120 logical partitions... plus the one "active" primary Boot Manager "system reserved" partition which must be kept.

[Success] Dual Booting Arch and Windows 7 [Advice / Confirmation]

So I have been trying to get Starcraft II to work with wine and no luck.
I have decided to install windows back on my computer, besides it might come in handy since I'm heading back to school soon.
Anyways I have tried dual booting arch and windows in the past, and my results have never been stable.
Today I will try using the program gparted.
Let me give you my thoughts on how I plan to go through this and please give me some advice so I don't loose everything I have worked for on my linux box
1.Currently I have two hard drives, one for all my main programs and one for my media files (mounting usb, dvd, etc, and it actually has no files in it xD).
I plan to use gparted to re-size my second harddrive (media drive), create an extended partition, and a logical ntfs partition within it.
2.I pop in my windows cd that I recieved with my laptop and install it on the space I have partitioned for windows.
3. If my grub gets wiped out my windows (which I hope it doesn't not sure how the MBR stuff works) I insert a Ubuntu live cd and do
sudo grub
> root (hd0,0)
> setup (hd0)
> exit
4.Configure grub to boot windows 7.
5.Be happy with no headache.
SO....
If someone with past experience with dual booting windows and arch could please give me some advice, as I do not want to lose all my data, start over, and have another headache.
I know I must learn to backup arch, which I will before september.
But if anyone has any protips, or sees a flaw in my plan please point it out!!!
Thank you very much for taking the time to read this and even more if advice has been given to boost my confidence!
For now I will wait
Thank you fellow archies.
Last edited by Jabrick (2011-07-03 01:29:36)

satanselbow wrote:
1) Windows must be installed to a primary partition - attempting to install it to an logical partition will result in an epic fail
2) Physically disconnect the harddrive you do not want windows on as windows typically installs the bootloader on the 1st hardisk (ie /sda) regardless of installation drive (ie /sdb)
3 / 4) Complete the windows installation then reattached your Arch drive and edit /boot/grub/menu.lst (as root) pointing the W7 entry to (hd1,0) - no need to reinstall grub
5) Hey it's windows - anything could happen
If you create an NTFS partition right at the beginning of the the drive before you start the W7 install you can prevent it greedily using up 2 of you 4 primary partitions - I would also completely update you new W7 installation past SP1 before reattaching the other drive to further prevent W7 going mental
satanselbow thank you so much!
Everything works great I had no stumbles, and I hope no problems in the future!!
I will post exactly what I did in case someone has the same issue.
1. Partition you're secondary harddrive as primary ntfs with gparted
2. Reboot, and if you get a file system check error, check you're udev rules. (For my case in particular I had to change the udev rules I got for auto mounting usb, ext harddrive, etc.
3.Power off your computer and physically remove the harddrive that contains all your linux goodies
4. Plug in your windows cd and install in the partition you created
5. Update your windows OS
6. Plug in Ubuntu live CD and reboot
7. Use commands to get grub to overwrite the windows boot loader (In my case I put grub everyone hd0,0 hd0,1 just to be sure, but you might want to do things cleaner)
8. Reboot and see if grub loads up
9. Use Ubuntu live CD again and launch Gparted, select the boot to your extra linux space (if you had one, not sure if this is needed)
10. Plug in your linux harddrive and reconfigure /boot/grub/menu.lst and your good to go
Once again shout outs to satanselbow!!! For without him I might've failed brutally!
Cheers!

How to set time in Dual-boot config with Windows 8.1

Hi,
I have been trying to workaround this problem i am having with Arch linux and Windows 8.1 time settings.
According to Installation guide on Wiki I set hardware clock to UTC and added my local time zone too.
But my Windows 8.1 uses hardware clock a local time and it is really confusing me.
I did tried to setup Windows 8.1 to use UTC (http://superuser.com/questions/494432/f … bios-clock)
but that settings is not working on my side (most Windows 8.1 users are also getting the same problem)
Please help.

I have two laptops which are dual booted arch and Windows 8.1. For both of those machines I set the Windows clock to be UTC instead of local using the method in https://wiki.archlinux.org/index.php/Ti … in_Windows (i.e. creating the .reg file and executing it - take care that the .reg file is created correctly with the .reg extension or it won't execute). I still allow Windows 8.1 to update its time from the network and it does not cause a problem, though the advice is to let Arch do the time synchronisation. (That may be because it is not yet summertime so I will also disable time sync in Windows before the change to summertime at the end of this month). I also followed the normal install advice for Arch and have the hardware clock in UTC, and have chrony set up to keep time in sync. Additionally I use KDE and have my normal timezone with DST adjustments for summertime. I have not had any problem with that way of working on either of my two machines.
I presume that if the Windows clock registry hack is done after the dual boot install it should not matter but I made that change before installing Arch.
Last edited by mcloaked (2014-03-21 10:46:04)

Can I dual boot Mac with Windows?

Hi all,
At the moment I have Windows 7 32 bit OS. I've always wanted either an iMac, or atleast the Mac OS. I've recently found out it's only £20.99, and i've always thought it was a lot more than that, which is a bargain! The only thing which is stopping me from buying it at the moment, is that certain programs which I use reguarlarly won't work on Mac, and I really need those programs. Is their anyway I could dual-boot it with Windows 7, so I give Windows 7 say only 8gb of my hard drive, and Mac the rest?
I will appreciate any answers, and thanks for tackling this for me!

ryanroks1 wrote:
Thanks for helping
Is an Intel Mac just an Intel Processor, with Mac OS?
Yes Macs changed to Intel Processors in about 2007. You can upgrade as far as Lion with a Core2Duel Processor or better. CoreDuos will only update as far as Snow Leopard.
Hope this helps
Pete

Dual Boot on Yoga11S (windows 8 + windows 7)

I'm trying to install Windows 7 as a dual boot with the Windows 8 preinstalled on a new Yoga 11S.. Has anyone succeeded at trying to accomplish this?

hi
You might want to follow this thread,
Yoga 11s was able to run Windows 7 but There is a screenshot of Unknown devices.
I also check the Lenovo Support site and no drivers yet for Windows 7.
You can follow neokenchi's guide there on how to parse and check the Hardware ID and then download the driver from the device Manufacturers.
http://forums.lenovo.com/t5/IdeaPad-IdeaTab-Slate-Tablets/Yoga-11s-Windows-7-drivers/m-p/1180983#M23...
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Dual boot CentOS and Windows 7

Hello,
I am looking for such solutions wherein I can have CentOS as a dual boot along with WIndows 7. I tried searching for resources and found the following link very helpful.
http://www.techotopia.com/index.php/Installing_CentOS_6_with_Windows_in_a_Dual_Boot_Environment#Part...
http://www.youtube.com/watch?v=YCSROwFTQ1c
This should help. Please follow the above steps if you can find your required Linux Distributors iso's similar to the CentOS.
Moderator note: moved post to its own thread. Changed subject to match content. Was: Re: dual boot kali linux with windows 8

First, you need to configure your broadband router. WLAN security puntually.
For Windows, you need to install drivers. When the wireless card drivers are installed, Windows automatically will detect any WLAN (ADSL routers use standard options, like showing the name of the WLAN).
For other any OS, read the FAQ.
PS: Always check hardware compatibility before installing an OS.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem

Pre-configured dual-boot Ubuntu and Windows

Of possible interest to the Linux folks: A newly opened Laptops with purpose store is now offering several popular ThinkPad models fully pre-configured with dual-boot Ubuntu Linux and Windows.
These systems come with a lot of pre-installed applications, see Dual boot Linux and Windows page for details.
At the moment, we are working on specific solutions for students, educators, scientists, designers...
Would love to have some feedback from the community on the existing offerings as well as suggestions/wishes for the future ones.

That would be fine if some hp machines didn't have broken UEFI that don't respect setting the default OS.

Add'l Partitions to Dual-Boot Win 8/Arch Linux

I'm hoping to get a dual-boot arrangement going on my refurbished Asus Q200E Netbook that Santa brought!
Here's what the hard drive looks like now:
Asus tells me the following:
sda1: System Files to start
sda2: Recovery
sda3: OS automatically created when an OS is installed
sda4: Operating System [Clearly Win 8 is here]
sda5: Unallocated space (and yet it's formatted and has 25.5 MB of data written on it)
sda6: Add'l files for recovery
What's the best approach to create my needed linux partitions? Shrink sda4, and slide sda5 & sda6 to the left?
Any tips/suggestions/warnings would be greatly appreciated! Does anyone know if my touchscreen will work under Arch...?
Thanks in advance!
Last edited by wilberfan (2013-12-28 00:32:21)

wilberfan wrote:
alezost wrote:I had similar partitions on my ASUS X75V except of your sda5 (i didn't have it). I just shrank sda4 (from Windows8 just in case), and then i used the new space for ext4 partitions (this time i used gparted).
I'm in the process of doing something similar (also using gparted). Does your Asus have a touchscreen, and did it work after installing Arch? How many ext4 partitions did you use to install Arch?
No, i don't have a touchscreen, i hope the wiki will help you with that.
I just used 2 partitions (one for "/" and one for "/home").

[SOLVED]Proper Partitioning for Dual-boot

I am attempting to dual-boot Windows XP and Arch, except I've left no free space...
Do I have to reformat?
Also, a question on windows. It uses 1 partition for everything, then allows you to create logical ones, right?
Last edited by Haptic (2011-06-22 04:31:38)

Haptic wrote:
I am attempting to dual-boot Windows XP and Arch, except I've left no free space...
Do I have to reformat?
Also, a question on windows. It uses 1 partition for everything, then allows you to create logical ones, right?
What Mardoct said about resizing w/ gparted is true, so unless you have the data backed-up, do it as your own risk. Can you post a screenshot of a gparted map of your drive?
As you know, Win needs to be the first partition on the drive. You are limited to four primary partitions, so if you want more, make three primary partitions, then the rest of the space an an extended partition. Inside the extended partition, you can add many logical partitions. I'd recommend doing all this from within gparted.
My 1 TB drive example:
/dev/sda1 (primary for windows), 20 gigs
/dev/sda2 (primary for Arch), 20 gigs
/dev/sda3 (backup of my Arch partition), 20 gigs
/dev/sda4 (EXTENDED PARTITION), 873 gigs
/dev/sda5 (logical for /home), 72 gigs
/dev/sda6 (logical for /var), 8 gigs
/dev/sda7 (logical for /boot), 0.11 gigs
/dev/sda8 (logical for /data), 784 gigs
/dev/sda9 (logical for swap), 8 gigs
As a side note, you can also you gparted to copy/paste entire partitions which makes keeping backup very easy. My /dev/sda3 is a periodic backup of my live Arch partition.
Last edited by graysky (2009-09-16 11:15:29)

Macbook Pro - 2 Hard Drives - Dual Boot OS OSX + Windows

Hello guys, I've been facing an issue here
I bought an SSD 2 years ago and changed the original MBP HD. I did a fresh install of OSX while still having my optical drive. Everything is fine with the OSX installation.
Recently I bought an enclosure and installed the original MBP HD drive into the optical drive slot. Now i have two HD's on my MBP (Early 2011 - Unibody Model)
The configuration for the Hard Drives is as follows:
SSD Drive - disk 0 - OS X Running fine
HD Drive - disk 1 - clean formatted to accommodate Windows 7 installation
I started the BootCamp Utility formated the second hard drive to install windows from bootable USB. Everything works fine until the point where the Windows installation actually expands the files. I always get the same error, that windows cannot be installed on that drive and any changes will be reverted back to original settings.
Several hours after researching the whole thing this is what I've got:
The error that I am getting is for the configuration of the drives, a fix to this problem is to take out my SSD, install the old HD in its original position, install windows normally, put my SSD back in its position and put the old HD in the optical drive and thus I will have the Dual Boot of two OS in two different HD's. That's really really awful as I have to take appart again the whole thing and swap between the drives till the process is finished. This is because The EFI boot + Windows to be installed require the disk that windows to be installed to be on main slot - disk 0.
My question here is, is there any fix to the BootCamp assistant to let me install windows on the hard drive that it is located on the disk 1 position?
Moreover is there any way to install windows through the environment of OSX with the use of a VM, but, the windows to be a bootable OS rather than a VM bootable image? (on disk 1 - optical drive SATA port). - What I mean by that is, while running OS X normally on disk 0 run a VM software that will mimic the environment of a bootloader so that I can install windows on disk 1, but after I shut down my computer, windows should be accessible on disk 1 as a normal installed OS.
Sorry for the long post and thank you very much for your time, any suggestions would be really helpful.

You can install Parallels or Fusion, either will work. When you setup either Parallels or fusion you can tell it to use your already installed Boot Camp installation of Windows as its target guest operating system.
You would then just boot into OSx, start your VM (Parallels or Fusion), then you'll have access to both OSx and Windows without having to reboot.
I have this setup and two monitors. I have my Windows running on my external monitor and OSx running on my Macbook Pro monitor at the same time.
Beware that you will need to re-register Windows to get a second key. This is free and easily done either online or by calling the Microsoft registration number. The reason for needing a second key is that Windows, although only installed once in your Boot Camp partition sees the virtual hardware created by your virtual machine and thinks it has been reinstalled on a new computer.

Is it possible to have a dual boot system with Windows that can ALSO be booted into a virtual machine optionally?

I have been looking for a solution to this for some time now. I want the convenience of a virtual Windows environment that can run simultaneously with OS X Lion--something I have right now using Virtualbox. But at the same time, there are graphics and processor-intensive Windows applications (for me, games and engineering applications) that don't run well at all in a virtual machine. So, here is what I am looking for:
A dual boot (i.e. bootcamp) system running Windows 7 and OS X Lion in which the Windows 7 machine can EITHER be booted as a virtual machine while running OS X OR booted physically so as to utitlize all system resources. The real trick however, is that I I want the virtual machine and the physical machine to be the exact same system. Meaning, if I boot physically into Windows and change something... rename a file, run a program and create a file, etc... those changes will all appear in the virtual machine.
Now, what are my options? I have read about Virtualbox and VMWare Fusion's "Raw Disk access" function but I can't tell if that's what I'm looking for or not... I half-thought that they were talking about converting a physical OS into a virtual machine, but without the intention of booting the physical OS again...
Also, I'm open to any software, free or otherwise. Thanks!

both VMWare Fusion & Parallels Desktop for Mac can use a bootcamp Windows installation as VM exactly like you want.

Installing mac os x on an existing dual-booted laptop (with windows/linux)

Hey everybody,
I am wondering if any of you have advice for the best way of going about installing a version of the Mac operating system on my Dell laptop, considering that I already have Windows and Linux (SuSE) in a dual-boot environment, and an Intel Pentium 4-M processor (which I think is x86?)...
I've looked at the Mac store and it looks like OS X Tiger is only for PPC processors. Is there a way to get it to run on my processor?
The reason I am doing this is that I really want to test a website I am developing on Mac browsers, like Safari and IE on Mac, but I can't afford to buy a new Mac system (nor do I really want to, since I use this one computer for everything).
Also, would the Mac installer be able to partition my drive for me automatically?
Thanks!
Stephen

Just make your web site standards compliant and we'll be fine.
The only trouble we'd have is if you started coding your sites chock-full of Microsoft ActiveX garbage.
And don't bother coding your web site to function on IE for Mac. Most Mac users are smart enough to not use a dead web browser which hasn't been supported or updated in years. Microsoft ended its life long ago.

Dual Boot Ubuntu and Windows 8.1 on HP ENVY dv7

Okay, I've installed 14.04 LTS with EFI and Secure Boot enabled. My problem is that the HP automated boot process ignores the presence of Ubuntu and boots directly into Windows. The only way I can boot into Ubuntu is to intercept the boot process by pressing the Escape key immediately, selecting Boot Device options (F9). choosing "Boot from EFI File", then pressing Enter on the next page (a description of the hard drive), choose EFI from the next screen, select "<ubuntu>" from the subsequent list, the select "shimx64.efi" from the next screen, which gives me the Grub list (without, I might add, any reference to Windows!) So, while it works, it is a laborious process at best. Have tried to follow the following post from an HP help forum:
So, until HP releases an updated UEFI that allows turning this "feature" off or rearranging boot options through the F10 UEFI setup, this is what you can do to get dual boot with the least amount of hackiness:
In Windows, mount the UEFI partition (mountvol S: /S mounts it as the S: drive) and copy the file \EFI\Microsoft\Boot\bootmgfw.efi to use some other name (for example, I copied it to "\EFI\Microsoft\Boot\bootmgfw.efi~", but you can change the name to anything else).
In the Windows command prompt, update the Windows UEFI entry to point to the new name: bcdedit /set {bootmgr} path \EFI\Microsoft\Boot\bootmgfw.efi~ (adapt to your set name accordingly).
Optionally, change the name of the Windows boot loader so that you would be certain that it points to the new file location: bcdedit /set {bootmgr} description "Fixed Windows path"
Install the other OS. In my case the bootloader was installed into \EFI\opensuse\grubx64.efi.
Delete the two files, \EFI\Microsoft\Boot\bootmgfw.efi and \EFI\Boot\bootx64.efi.
Use efibootmgr to delete the "OS boot Manager" entry: sudo efibootmgr -b 0000 -B
Set the new OS bootloader to be the default bootloader by using efibootmgr with the -o option. In my case, I had an entry called "opensuse" in slot Boot0001 and the updated path Windows entry in slot Boot0002, so I had to do sudo efibootmgr -o 0001,0002
Update GRUB to point the Windows entry to your renamed file (you'll have to create a new file in /etc/grub.d and rerun grub-mkconfig).
Was able to do everything as posted except "Delete OS boot Manager", because there is no entry for that item when I run efibootmgr in Ubuntu terminal. I did reorder the boot order using efibootmgr so that Ubuntu was first and Windows was second, but the HP OS boot Manager changes it back!
Would really appreciate any help. Thanks in advance.
SamJ20109

Hey vikas_g,
Welcome to the HP Forums!
With Ubuntu not recognizing your partitions during installation, some information that may be of assistance to you, could be in this document 'Frequently Asked Questions About Linux (FAQs)'.
If your question is not answered from this document, I would suggest asking your question on the Ubuntu Forums.
I hope this information helps!
I worked on behalf of HP

Restrict access to partition in dual boot- both boots Mavericks no windows

Similar Messages

Maybe you are looking for