Restrict authorization to Customer data.

Hi,
We are working for a Telecom based client. The client has a data security issue and wants to restrict our consultants from viewing all the data related to few sensitive customer. 
Is it possible to restrict the users from viewing or changing the information of few customers? They should be able to view and change the information of other customers normally.
Guru's please suggest, if its possible.

Hi Nilanjan,
We have got the same reuirement where some users need  be resrtcited  to view some details of some sensitive customers. Could you please provide some information on how to restrict this.
Your answers are much appeciated.
Regards,
Sandhya

Similar Messages

  • Restrict authorizations for loads from HR to BW for certain data

    Hi,
    our customer wants protect some data in the HR productive system. This data are defined/restricted by certain personal areas.
    It is not enough to use reporting authorizations in BW to restrict presentation in queries or use filters in infopackets during load to avoid this data.
    The requirement is to make load of such data from HR to BW absolutely impossible, even BW administrator cannot see them and must not be able to load them.
    We will probably have to somehow limit ALEREMOTE users authorizations in BW. I do not know how and I even doubt, that extractors in HR source system perform authorizations checks for fields.
    Is there any way to do this?
    Thank you very much,
    Petr

    Hi Petr,
    Create a general enhancement program (restricted authorization) with generic name, which should be called dynamically for every datasource.
    Refer-
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2d99121a-0e01-0010-e78c-b1ae566a2413?overridelayout=true
    Not personally tested but check following.
    In that program, you may try applying following logic:
    1) You may need to use TYPE ANY field symbols
    2) In While Loop until all fields of C_T_DATA checked, may be a counter based on total number of fields.
        DELETE C_T_DATA where <TYPE_ANY1> EQ (OR use IN) specific value(s) of Personnel Area
        DELETE C_T_DATA where <TYPE_ANY1> CS (Contains, check pattern) specific value(s) of Personnel Area
    ENDWHILE.
    Optionally: For Standard Daatsources in the same program you can add logic based on standard field only "WERKS".
    Note: You may need to research on dynamic pointing using field symbols for every field.
    Thanks
    Arun Purohit

  • Restrict authorization in VA01 for partner function field

    Hi all,
    I need a way to restrict authorization in VA01/VA02 for users so that in the headers tab -> partners, the employee responsible field is locked. Other fields (i.e. ship-to/sold-to should still be changeable)
    What is the best way to achieve this?
    Thanks,

    This is not the solution for your query to make it non modifiable. You want it on user base but if you make it non modifiable it will be in display mode for all users. But if you want to try this you can make it non modifiable in following path
    Sales and distribution > Master Data > Customer Master > customer hierarchy > partner determination for sales document header.
    Im not sure the exact path because i have no access of system at this time. But you can find it in above nodes.
    Proper solution of your question is user exit as mentioned above.

  • Customized R12 Standard Purchase Order report with custom data and layout

    Hi all,
    We need to customize the seeded Purchase Order report in R12 to add an additional section to include cost data coming from our custom table. The key is that our customized report should be launched instead of the seeded report via various PO forms (e.g. View Document menu option, PO Communications form to email, fax and print PO, etc).
    I manually set up a custom Document Type Layout for the Document "Standard Purchase Order" to use my customized template so my custom layout is shown instead of the R12 layout, but according to Oracle support the report can only draw data from a set of seeded Oracle views like po_headers_xml,po_lines_xml etc.
    Any suggestions how we can add our custom data to PO report in R12?
    Thanks! Mike.

    Hi Mike
    thats a tough one, the PO generation is a bit restrictive to say the least when it comes to customizing. It sounds like you have worked out how to get your own template in there to render the PO.
    On the data front, all I can think of is to customize and replace the seeded PO view with one that incorporates your extra data.
    Or, get into the page customization world and write your own extract and format concurrent program/procedure and then hook it onto the buttons where you want to launch it.
    You might have more luch, response wise from the EBS PO forum.
    Procurement : Procurement
    OAF: OA Framework
    Regards
    Tim

  • Issue with Custom data parameter in Excel Data Connection

    Hello,
    We are querying a OLAP (SSAS 2008) cube using Excel 2007 by creating a data connection to SSAS server with an extended parameter “Custom Data”. We are using custom data parameter to apply our application’s user security to filter dimension
    members in Excel’s pivot table report. We have created a pivot table in Excel and the excel is including this custom data parameter along with each request that excel is submitting to SSAS.
    However, when the user selects “Show Properties in Report” option for a dimension which is selected in Row-axis of pivot table, Excel is not including custom data parameter . Why this “Custom Data” parameter is not being included in
    the request only for this specific case?
    1. The Request which sent from Excel to SSAS when user clicks on “Show Properties in Report” option
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"><soap:Header><Session xmlns="urn:schemas-microsoft-com:xml-analysis" SessionId="AE6B294B-4983-4010-BC5F-E0896A49ECD9"/></soap:Header><soap:Body><Discover
    xmlns="urn:schemas-microsoft-com:xml-analysis"><RequestType>DISCOVER_LITERALS</RequestType><Restrictions/><Properties><PropertyList><Content>SchemaData</Content><Format>Tabular</Format></PropertyList></Properties></Discover></soap:Body></soap:Envelope>
    2. The sample Request which sent from Excel to SSAS for all other requests
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"><soap:Header><Session xmlns="urn:schemas-microsoft-com:xml-analysis" SessionId="74165AD6-C240-4634-92A1-61A400A3FC97"/></soap:Header><soap:Body><Discover
    xmlns="urn:schemas-microsoft-com:xml-analysis"><RequestType>MDSCHEMA_CUBES</RequestType><Restrictions><RestrictionList><CUBE_NAME>RepCube</CUBE_NAME></RestrictionList></Restrictions><Properties><PropertyList><Catalog>QAV10_12thMay2010</Catalog><Timeout>5000</Timeout><SafetyOptions>2</SafetyOptions><MdxMissingMemberMode>Error</MdxMissingMemberMode><LocaleIdentifier>1033</LocaleIdentifier><DbpropMsmdMDXCompatibility>1</DbpropMsmdMDXCompatibility><CustomData>xxxxxx</CustomData></PropertyList></Properties></Discover></soap:Body></soap:Envelope>
    As the Custom Data parameter is missing in 1st request our application logic is throwing a custom exception to Excel and Excel is not able to understand the exception message. Excel is sending the same request repeatedly (going into infinite loop) and the excel
    window is freezed. Not able to work with excel until restarting the Excel.
    Can anyone help me to resolve the above? quick help is much appriciated!
    Thanks,
    Venkat

    Venkat,
    We have a very similar issue, but there is almost no material to help us. If this gets to you, please let me know if you progressed it or whether I need to go to Microsoft for a solution
    THanks
    David

  • Restrict Authorization at Material level during production confirmation

    Hi SAP Gurus,
    I would like to ask if its possible to restrict authorization at Material Level during production confirmation.
    Our scenario is we have SFG and FG which are handled by different group of people but it has the same Order Type. Now we want to restrict authorization such as one department can only confirm SFG and the other department can confirm FG only.
    Is it possible to set authorization at material type or production scheduler level. IF not possible, is there other way except creation of new Order Type?
    Thanks,
    Raymond

    Hi Raymond,
    DO you mean I should create a customized table for this?
    Yes
    Are there no standard way?
    As per my knowledge, you can control through production order type, so you need to create seprate order type for this
    Thanks,
    Sankaran

  • Authorization Material Master data

    Hello,
    vould you tell me if it's possible to restrict changing Material master data according to material type ?
    Thank's

    Hi,
    Use authorization object M_MATE_MAR - Material type authorization for material master records
    This object determines whether a user is authorized to maintain the material master record for a specific material type.
    Defined fields
    Fields      Possible values         Meaning
    ACTVT       01                      User may create data.
                02                      User may change data.
                03                      User may display data.
                06                      User may flag data for deletion.
    BEGRU                               Here you must specify the
                                        authorization groups from table
                                        T134 for which the materials
                                        concerned may be processed.

  • Getting Customer data from Different R3 system to CRM

    Hi Gurus,
    I need to get Customer data from different R3 systems to CRM. But the problem is, the customer datas in these R3 systems have the same BP number, and the SD datas were defined same  in these R3 systems. Thus, when ı try to fetch these SD datas to CRM, it overwrites the existing datas.
    I have read different scenarios to solve this;
    1.  About Using Mapping.
    2.  About Working on different Clients.
    Do you have any solution or suggestion? Need your Help...
    Best Regards...

    Hi,
    The multplie backend scneario is supproted but wth restrictions and on a project basis. Unfortunealtey there's no simple document we can refer you to for this. You would need to involved SAP conuslting- please refer to note 1084315.
    Best regards,
    Brian.

  • Displaying Customer Date-Fields in SRM 4.0

    Hallo,
    I want to display a customer date-field (data type DATS) in the basic data of a SC. The Problem is that the field is only displayed, but you can't enter any data. When i change the data type to CHAR you can enter Data in the field.
    Can anyone help me, please?
    Best regards

    Hi,
    please try to add the authorization object S_DEVELOP (Role: SAP_EC_BBP_ADMINISTRATOR) to the user, and test again.
    Regards
    Laszlo

  • What's going on with re-ordering custom data types?

    OK, I can't make heads or tails out of this one:
    I've got a bunch of custom data types in my own typedef file (and it's part of my type palettes).
    I open up my types browser, select my type file, go browse to the "custom data types" section.
    I want them in a different order so I can better understand them.
    (actually I select the one below it (TekTimestamp) and try dragging it up and down the list. anywhere I go I get the circle with a cross through it saying I can't drag it here.
    OK, give up on that one.
    Then I'll grab TekSimulateMode typedef
    Try dragging it around, and I get the nice black line saying I can drag it somewhere else -- looks kinda like this:
    Notice I dragged it only one spot down, and the item I dragged it across is used in exactly the usage locations, and neither has any nested typedefs (they are only containers of primitive boolean/string).  Also notice that it and everything I dragged it across is owned by this type file.
    Once I let up on the mouse, I get this warning message popping up:
    What's up?? Why can't I change the location of the first typedef (ordering) within the file, but I can for the second??
    Why do I get this dialog when I move a typedef within a file that already owns it??

    Oop.  My bad.  I was so eager to help you out...
    I know it has to do with the Usage column.  Since you are changing your Station Globals.ini by dragging them around I think the warning is from there.  I know that once you have instances of them then you are now changing that data type for all those locations.  That's why you can't delete them if you have an instance.  It won't (or shouldn't) affect anything by moving them other than you may now have to save your station globals and sequence files again.  Not sure if it revs the version or not, it doesn't look like it did on mine.
    As for the one that won't move?  Not sure on that one.  I've never seen that.  Possible some instance is restricting it.
    Hope this helps some,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • How to debug a Diagnostic Data Adapter (custom data collector) for Microsoft Test Manager

    Hello,
    I have created a custom Diagnostic Data Adapter aka. custom data collector for Microsoft Test Manager (MTM) and installed it, all according to the guidelines under  Creating
    a Diagnostic Data Adapter to Collect Custom Data or Affect a Test Machine.
    I would like to debug my data collector. On which machine should I perform the debugging and to which process should I attach from Visual Studio? Are there any restrictions regarding the user who is running the debug session?
    How can I do that?
    Thank you ,
    Ana

    It seems that I found the solution, but I would like someone still to verify if it is the right one.
    Steps:
    Turn on "Microsoft Symbol Server" under In Tools-->Options-->Debugging
    Restart manually "Visual Studio Lab Agent Service" on the machine where the collector is installed (this actionautomatically restarts the  Visual Studio Test Agent ("C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\QTAgentService.exe")) 
    Load code for your collector in Visual Studio 
    Attach the Visual Studio debugger to the processes QTAgentService.exe and QTDCAgent32.exe
    Start test in MTM on client machine using test setting which trigger the data collector (diagnostic data adapter)
    and finally hit a brake point in your code...
    Thank you,
    Ana

  • No Data in Reports Details in Custom date range

    Hello, iTunes U Public Site Manager Admins.
    As the iTunes U Public Site Manager admin, I've been trying to access our institution's iTunes U Reports Details for a couple of days. (I send a monthly report of usage to our course/collection contributors.) When I custom the date range, under Details, there is zero entry; "No data available in table" message is shown.
    This feature had been working well since Apple iTunes U added this enhancement on August 13, 2013. The report Details showed the exact stats for Browse, Subscribe, Download, Stream, and Enclosure for each course/collection in the custom date range.
    Now under "Details", the data is shown only when the date range is Last 30 Days. It shows no data in custom date range when the Calendar is used to select a Start Date and End Date.
    Has anyone else noticed this problem?
    Thanks.
    Q. Wang

    Erik.
    I used your suggestion and it worked very well. This is how I did it.
    Export the range of data that includes Feb. 1-Feb. 28, 2014 as .tsv file.
    Open that file in Excel.
    Add a blank column next to the Date column. Use function =Month() to just extract the month into the new column. Fill down the whole column. Then copy and paste special (value) into the same column (I have over 26,000 rows of data in the file.) Converting to Value will allow for the next step of PivotTable.
    Create a PivotTable for the 26,000 rows of data. Use Month as the Report filter, iTunes_ID as the Row Labels, Select Browse, Subscribe, etc. as the Sum Values. (The result is a summary table with about 200 rows.)
    I then do a Vlookup to my premade Master file to add Category (course, collection, resources) and Instructor Name to each of the 200 rows.
    That will do it for my monthly report.
    Thanks for your tip again. I did not know the .tsv file would have DATE for each item.
    Sincerely,
    Q. Wang

  • Customer Dates in Activity

    We have added some custom dates to our date profile for activities. We woulod like to transfer these dates to BW.
    Is there an easy way to do this, or do I need to enhance the datasource etc.?
    Does anybody have a list of the steps I will need to go through?
    I think:
    1. Enhance datasource, with new extract structure, selection and mapping modules.
    2. Replicate new datasource to BW.
    3. Create new ODS object containing new fields and update transfer rules accordingly.

    Stuart,
    We're facing the same problem. How did you extracted custom dates into BW? (if you did!). I've added a couple of custom dates using the date management functionality in CRM, but I´m not able to transfer those values to BW.
    If you have any info or clue, please let me know. Thanks!
    Pablo

  • Version number conflicts with NI custom data types

    Custom data type version number conflicts
    Options
    Mark as New
    Bookmark
    Subscribe
    Subscribe to RSS Feed
    Highlight
    Print
    Email to a Friend
    Report to a Moderator
    07-11-2011 08:10 AM
    I am new to Teststand software interface.  While doing my first software release under the guidance of a more experienced colleague, we discovered that Teststand will not run if it detects version number conflicts between custom data types on my machine vs. the production test machine.  I verified differences between all .seq files in my test program directory, but I did not realize that the version number difference exists in the StationGlobals.ini file, which is stored in a different location.  After discovering this, I modified the version number in one of the files.  However, two releases later, I discovered that the version number mismatches in another two files.  This raises several questions for me :
    1.  Is there a way in Teststand to view all the .seq files where a custom data type is used and then change its version number in one attempt?
    2.  Under what instances does Teststand upgrade the version number of a custom data type?
    3.  Are there any tools or scripts within Teststand that can allow the version number of custom data types to be changed in all .ini files when a difference is discovered between the current production test station settings and a new release?
    Please help.

    Have you read this?  http://zone.ni.com/devzone/cda/tut/p/id/7060
    I can tell you that your situation is not uncommon with TestStand.  The key is just doing it right the first time.  haha
    #1- I doubt that this is possible because then TestStand would have to know every location of every .seq on the machine.  You will only see it when you open the sequence file.
    #2- TestStand updates the version every time you change it.  You should get a message popup when you try to save that asks if you want to increment the version or not.  There's also a check box that says Remove Modified Mark From Types.  Look under Station Options in the File tab.  There are some settings there about Type conflicts.
    #3- http://zone.ni.com/devzone/cda/tut/p/id/7910
    http://digital.ni.com/public.nsf/allkb/4153576DA04BEB098625743D00704A09
    Hope this helps,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • Custom Data

    Is their away to get custom data into an email campaign?

    Hey there,
    What do you mean?
    Could you be more specific on what you are trying to achieve?

Maybe you are looking for