Restrict same user using same internet explorer session

Hi,
I encountered a problem here. Hope some one had deal with this problem can help me out.
The application was written in BSP. The users are using Internet Explorer 6.0 and 7.0 to use the application.
The problem I encountered here is after an user is logged in to the system through the browser, then he open another new window or tab (ctrlN or ctrlT), the application will not prompt him to login again because the sessions were shared between this two internet explorer. I do not want this to happen because it giving problem and causing data loss.
Any possible way to restrict user to open two same application within same session? Because the problem will not occur if the user open two same application within different session.
I really appreciate for those who can help me on this.
Thanks you.

Check OSS notes for this - there are a number about aspects of BSP logons.
I believe this is to do with a cookie being held / kept alive that should not be. There are some OSS notes about this issue - you may have to redefine how the user logs on so that HTTP Basic Authentication is not used.
Andrew

Similar Messages

Since converting to Firefox, unwanted internet explorer sessions keep popping up - how do i prevent them?

The most frequent unwanted Internet Explorer sessions reflect a request to use credit score applications, but other advertising popups appear.

Sounds like Malware.
Install, update, and run these programs in this order. They are listed in order of efficacy. '''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx] 
Also, if you have a search engine re-direct problem, see this: 
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

Use only Internet Explorer for SAP portal

Hello,
We have a requirement to use only internet explorer for SAP portal.
When we try to use portal in any other browser, it should display a message saying "This browser is not supported for the application" (or any other message). But purpose is, the portal application should be usable in only one browser i.e Internet Explorer.
If any one have any idea on this, how this can be implemented, then please share the same. I tried to find if there are any standard SAP portal parameters, but haven't come across any.
Regards,
Denish

Hi Denish:
Following link may not apply to your scenario but could give you some direction and ideas:
Changing the Default Browser Detection - Developing Web Dynpro ABAP Applications - SAP Library
Further more, specifics of your system set up may help us in understanding your situation better and perhaps we can offer more help.
Sincerely,
Amrit

Configuration issue in IE as Document mode: 10 and User agent String: Internet Explorer 8

Hi,
I have a telerik rad popup window performing some input operation. The problem is when I use the configuration in IE as Document mode: 10 and User
agent String: Internet Explorer 8, scroll bars appear in the window from nowhere. It is working fine with every other configuration of IE. I've also used a separate stylesheet for IE 8 but it won't apply in this case.
Here are the screen shots of the window.
Actual view
With Scorllbar
Please if anybody could suggest a solution for this weird problem it would be a great help.
Thanks in advance.
Neelesh

Hi,
It seems we need to talk with the site developers to determine how the sheet would display with different IE user agent string.
Regarding the user agent string changes, please take a check with the following article:
Introducing IE9’s User Agent String
The Internet Explorer 8 User-Agent String (Updated Edition)
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Opening an Acrobat Reader document terminates my Internet Explorer session

I'm using IE9 and recently every time I try to open an Acrobat PDF document it terminates my IE session.

Hello there. Please see below for the answers you are seeking.
Regards,
David
From: Ankit_Jain [email protected]
Sent: Monday, 21 May 2012 9:03 PM
To: David Parker
Subject: Opening an Acrobat Reader document terminates my Internet Explorer session
Re: Opening an Acrobat Reader document terminates my Internet Explorer session
created by Ankit_Jain<http://forums.adobe.com/people/Ankit_Jain> in Adobe Reader - View the full discussion<http://forums.adobe.com/message/4425289#4425289

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

TS3212 I have an I tlunes account on my I pad. Can i transfer this account to my PC. Im using windows internet explorer 8

I have an I tunes account on my I pad. Can i transfer this account also to my PC. Im using windows internet explorer 8

See > http://www.apple.com/support/itunes/authorization/
From here > http://www.apple.com/support/itunes/getstarted/

BEx Query Designer - Execute pops up blank Internet Explorer session

Hi gurus,
From BEx Query Designer, I choose Execute, and it pops up a blank Internet Explorer window rather than the query. It says about:blank in the URL and the page is white.
I read some posts that say to run RSPOR_SETUP, but I don't have a Java system or Portal system so does that still apply to me? I want the URL that pops up to point to the BW system which is an ABAP system.
E_URL_PREFIX                    http://BWSAPF00.mydomain.com:8100
E_URL_PATH                      /sap/bw/BEx
E_URL_PROTOCOL                  http
E_URL_SERVER                    BWSAPF00.mydomain.com
E_URL_PORT                      8100
E_SUBRC                         0
Warm Regards,
CM

Hi,
Please note that Java stack is mandatory for running Queries in web side
or for executing the Queries using Transaction RSRT -> Java Web or
for executing the Queries using Query Designer in Release 7.x .
So, please install Java stack and use BI Java components for running
Queries in web side here.
Also, please refer the following note for details:
917950 - SAP NetWeaver 2004s: Setting Up BEx Web
Also keep a note of the following:
Please check the following link:
http://help.sap.com/saphelp_nwpi71
/helpdata/en/45/61d5aaa0546628e10000000a1553f6/frameset.htm
"With SAP NetWeaver 7.1, the Visual Administrator (VA) is replaced by
the SAP NetWeaver Administrator, that is, all relevant functions of
the VA are available in the SAP NetWeaver Administrator.
The VA is no longer delivered as of SAP NetWeaver 7.1. "
The interface is a little bit different now, but the installation
steps still follow the same logic as SAP NetWeaver 2004s.
You can use manual steps to set up integration as per note 917950.
Also, please don´t use report RSPOR_SETUP for configuration check
between ABAP and Java for SAP NetWeaver 2004s.
The report has been replaced by the support desk tool.
Please have a look at note '937697 - Usage of
SAP NetWeaver BI Diagnostics & Support Desk Tool'
RSPOR_SETUP is obsolete in BI 7.x release and Supportdesk tool should
be used in 7.x release.
Also refer the following notes:
1512988 - Frequently Asked Questions:BI Java 7.30 SP's/patches
1512356 - Patches for NetWeaver 7.30 BI Java Support Package
1506722 - Generic Note for BI Java Patches and Support Packages
And, please note that Patch Level 0 is not supported for BI Java components as per the following note:
1789842 - Patch Level 0 for BI Java Installation
Please do look at the note 1789842 for details.
Please check the Support Desk Tool as per the note 937697 and if you find
any RED signals in the file systeminfo.txt included in the file
supportdesk.zip, please correct it as per the Solution mentioned
there and check if it helps.
Thanks & Regards,
Sapna
Message was edited by: Sapna J Gurudutt

Can't cut & paste from Firefox into MS Word 2010, but can using MS Internet Explorer

Updated Firefox to most recent version, then installed MS Office 2010 with MS Word 2010. Then attempted to copy and paste a selection from the internet using Firefox as the browser, but when MS Word 2010 was opened, all paste functions were greyed out and non-functioning. Eventually, I closed Firefox and opened MS Internet Explorer to browse the internet and attempted the same copy and paste on the same selection of text on the internet, but when MS Word 2010 was opened, all of the paste functions worked. Seems like MS is blocking the text copy and paste function in MS Word unless the internet browser is MS Internet Explorer. The previous version of MS Word was 2007 and it functioned the same for both Firefox and MS Internet Explorer when internet text selections were copied and pasted into a MS Word document. Operating system is Windows XP with all service packs.

I am having the same problem after upgrading to MS Office 2010. I used to be able to drag a snippet of text from any PDF file to Excel with no problem...now I am unable to do that. What happened?

The restrictions that are available to Internet Explorer for Windows 7

Hi,
Is there any options for windows 7 to create restrictions in IE 8 or above as mentioned in the below link (In this article they gave the ways to restrict in IE 6 with windows xp environemt).
Could you please suggest the same way of restrictions in windows 7 as well..
http://support.microsoft.com/kb/823057/en-us
Thanks,
UdayaKumar S

Hi,
I am afraid there is no options through registry/group policy to turn off the keyboard shortcut keys in IE. As they are built-in and can't be controlled by a registry or group policy.
Besides, see if the following threads could help:
How to disable keyboard shortcuts in IE7 / IE8
Disable HotKeys in Internet Explorer 8
Best regards
Michael Shao
TechNet Community Support

Can you restrict APEX users to a single browser session?

I'm using APEX3.2.1
Is there a package,function, view or table in APEX that can be checked to see if a user_id
already has an active session (one that hasn't been purged yet).
I wish to restrict each user to a single active browser session.
Cheers
dfrost

Hi Roel
I've had a look at the views and it looks to be exactly what I'm after thanks very much for your help.
I've only been working on APEX a short while the info on the forum and all the expert blogs are of huge help.
Thanks
Derek
Australia

Restricting Export to Excel of internet explorer in BEx Browser

Hi,
Is there any way we can restrict the user to export the data into Excel. I have disabled this option in the template. But when the report opens through Browser, user right clicks on any part of the screen and he can export the data to the Excel.
Can we restrict this internet explorer options by anyway.
Please advise.
Thanks
Ramesh Ganji

Instead of this if I give a solution to disable right click option in Internet Will it be helpful.
Find the below code then
<script language="JavaScript">
//This code is the beginning of the right click disable
function right(e) {
//This function is for Net 4.
if (navigator.appName == 'Netscape' && (e.which == 3 || e.which ==
2))
return false;
return true;
function context(){
//This function takes care of Net 6 and IE.
return false;
document.onmousedown=right;
document.oncontextmenu=context;
</script>
But don't forget to reward points.
Regs
Gopi

Just installed sage crm and to integrate with email it requires the use of Internet Explorer, is there a way round this?

Most of the office use mozilla but we have just moved our database and office management to Sage CRM. In order to integrate the browser with CRM and transfer emails diary etc from CRM to outlook we have to use Internet explorer. Is there any good reason for this and is there a way round.
Many thanks

See if this helps you:
http://www.greytrix.com/blogs/sagecrm/2015/02/28/gumu-integration-for-sage-crm-with-sage-500-erp-is-now-cross-browser-compatible/
If not, doesn't Sage offer support for their software? Especially for new users?

I use "From Internet Explorer" to store my new bookmarks but they do not show up in my "Favorites" - where are they?

When I changed from IE7 to Firefox (and am very glad I did) I migrated my large list of Favorites (which was divided into sub-headings to make it easier to find items) to Firefox Bookmarks. As I continued to bookmark web sites, I added them to to the sub-headings in "From Internet Explorer" from which I can readily retrieve them. However, when I wanted to copy them to my laptop, I discovered that the only "Favorites" I can find on my PC are the old IE7 Favorites - none of the additions made within Firefox were there. Similarly, the Bookmarks Toolbar which I now use is different from the Favorites Toolbar still accessible from my Windows Explorer.
Where is this information stored in Firefox so I can copy it?
My OS is Wndows 7 Professional.

See [[Restore bookmarks from backup or move them to another computer]]
Moving bookmarks to another computer
'''Using Firefox Sync'''
You can use Firefox Sync to move your bookmarks from one computer to another.
Note: Firefox Sync continuously updates itself as you change bookmarks, so it does not provide a true backup service, nor is it intended to be used as one.
Firefox Sync is the best way to keep your bookmarks (and other profile data) synchronized between all of the computers you use. See Firefox Sync - Take your bookmarks, tabs and personal information with you for more information and Share bookmarks, tabs and more with your other computers for instructions on setting it up.
Using a bookmark backup file
'''You can also use a bookmark backup file''' from one computer and restore it on another computer. This is useful if you can't Sync the two computers, for some reason.
The bookmark backup file can either be a manual backup (see above) or one of the automatic dated backups located inside the Firefox profile folder bookmarkbackups folder. Place the bookmark backup file on your transfer media (e.g. a Flash drive) and copy it to the desktop (or any location) of the other computer. You can then restore the backup from the Firefox Library window, using the Choose File... option, as described in the Restoring from backups section above.

When I am on a web site and click a link - to a PDF or something else - nothing happens. If I use MS Internet Explorer, this is not a problem. Help.

When I use Firefox and am on a web site, if I click a link on that web site - like to download a PDF - nothing launches to open the file. The screen - after I click - changes to a blank screen, yet nothing appears. When I do this with MS Internet Explorer, the link immediately launches to whatever I clicked upon.
Please help - this is frustrating.
Thank you!
Mark

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Restrict same user using same internet explorer session

Similar Messages

Maybe you are looking for