Restrict the badi for particular transaction code

hi, i have implemented BADI_FDCB_SUBBAS01 and in the subscreen area 10 i attatched my own module pool program and screen number. my requirement is for FB60 only. and it is working for FB60 fine. the problem is also working for FV60.
Is there any possibility to restrict for particular transaction code say for FB60.
Please reply me soon....

Hi Praveen,
Since this is a single use badi you have the option to create a new filetr of your own. You can create a filter of type sy-tcode and in your implementation assign it a value of your transaction. Thus if someone else also wants to use it for some other transaction can have a implementation of his own for some other transaction.
The other way which is though not the recommended way buy easy to use is to put a check before your code on SY_TCODE = your transaction.
revert for more clarifications if required.
<b>Always reward points to useful suggestions.</b>
regards,
Vikas
Message was edited by:
        Vikas Taneja

Similar Messages

  • How to Restrict printing the document using IRM for a Single Document?Allow printing for some documents and restrict the printing for particular documents in same document library?

    Can we able to Configure the IRM in Document Level in SharePoint Document libraries?
    The document library contains multiple document sets , Can we restrict the printing according to document sets? Allow printing for some documents and restrict the printing for particular documents in same document library
     Is this possible?Please suggest.

    Yes, that can be done. But note that all administrators will have the same right to print, so you need to make sure the users are not administrators. You can include a macro to disable printing, but if the users disable macro, they can print the documents.
    Hence, there is no foolproof way to prevent printing documents. If you still need a foolproof security, PDF format provides password based security (viewing doesn't require a password) that can be implemented to prevent the document from printing,
    which doesn't require any special scripts and is tough.
    You can have a look at the following links:
    http://msdn.microsoft.com/en-us/library/office/ms458245(v=office.14).aspx
    http://msgroups.net/microsoft.public.word.docmanagement/prevent-printing-of-docum/91353
    http://www.go4sharepoint.com/Forum/prevent-printing-saving-documents-10150.aspx
    The following link explains about the security features in PDF. This is for information purpose only and not for promotion of any products:
    http://www.pdflib.com/knowledge-base/pdf-security/
    Balaji Kundalam

  • The signafigance of particular transaction codes

    Hi all , 
        can you tell me the scenario or the need for using following
    T codes. .
             1..SE30
             2..ST02
             3. SLG2
             4..RSA7
             5..SM58
             6..SM59
             7..SE21
             8..ST03N..
    Thanks and Regards
    Siva

    Hi,
    RSA7: Delta queue
    Delta records will be captured here in the form of logical unit of work.
    This is most useful because in Lo extraction, what ever the mode( direct delta, queue delta and unserialized v3 update), delta records will be captured in deltaque. after running the infopackage in bw , deltas moved fromdelta queue to sap bw.
    SM58: This is useful for checking trfc stuck. that means data transferred from source system to bw, then some logical unit of works may stuck . in sm58, what ever the luw stuck ,we can execute it manually . that means it showed the message " Transaction recorded ". choose those Luw's and click on F6 or execute luw's manually for moving the luw's which are stuck.
    sm59: this is useful to check rfc destination . how bw system is connected to soure system.
    some times loads won't progress due to problems in connection between sourcesystem and bw system.
    ST03N / ST03:
    work load monitor . this is useful for checking work load distribution of available servers.
    Regards,
    Chendrasekhar

  • Restricting the bandwidth for particular subnet in ASA 5545

    Hello Freinds,
    We have ASA 5545 connected to internet Router 3925. We are creating
    site to site VPN From Firewall and want to restrict the bandwidth  of the users
    travelling in the VPN. I know the process for router but not getting the 
    configuration for firewall as options for policing traffic are not coming under policy-map command in ASA.
    Configuration for router:
    ip access-list extended 105
    permit ip 10.10.10.0 0.0.0.255 any
    class-map test
    match access-group 105
    policy-map test1
    class test
    police cir 1000000
    conform-action transmit
    exceed-action drop
    violate-action drop
    int Gixx
    service-policy output test1
    Please help me with the equivalent configuration for ASA 5545.

    In ASA the access list wouldn't take wild card mask, instead it should be subnet mask, hence
    access-list capin1 permit ip 10.10.10.0 0.0.0.255 any
    access-list capin1 permit ip any 10.10.10.0 0.0.0.255
    Access-list cap permit ip any any ---> this is for all other traffic except 10.10.10.0
    should be
    access-list capin1 permit ip 10.10.10.0 255.255.255.0 any
    access-list capin1 permit ip any 10.10.10.0 255.255.255.0
    Access-list cap permit ip any any ---> this is for all other traffic except 10.10.10.0

  • BADIs for a Transaction

    Hi Gurus,
    Can anyone please tell me how to findout the available BADIs for a Transaction?
    regards
    sunil

    Hi Jaya,
    There are 2 methods to find a BADI for any transaction.
    Method 1:
    step 1. Execute transaction SE37 or SE80 and find function module SXV_GET_CLIF_BY_NAME'.
    step 2. Insert a breakpoint in it.
    step 3. Now go to the SAP transaction you want to find a BADI in.
    step 4. When you execute it, it will stop at the above function module.
    step 5. Look at the value of field EXIT_NAME.
    step 6. This will provide you with the name of the BADI that is available in your SAP transaction code.
    Method 2:
    step 1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
    step 2. In 'Display' mode, go to 'Methods' tab.
    step 3. Double click the method 'Get Instance' to display it source code.
    step 4. Set a breakpoint on 'CALL METHOD l_exithandler=>get_class_name_by_interface'.
    step 5. Then run your transaction.
    step 6. The screen will stop at this method.
    step 7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.
    Regards,
    SB.

  • User Exit / Enhacement / BADI for MB1B transaction

    Hi all,
    Movement type -311
    Plant 1004
    Storage Location - XXX
    Now reuirement is like during Transfer posting when user provides Receving Location and Material and Press Enter
    batch and qunatity should be automatically populated  based on some Selection.
    I checked BADI but no BADI is available when user press Enter.
    Please suggest me with Enhancement Spot , User Exit for this requirement.\
    Thanks in advance.
    Harsharandeep Singh

    Hi Harsha,
    Try these User Exits/Enhancements.
    Following are the BADIs for MB1B transaction:
    ARC_MM_MATBEL_CHECK Check Add-On-Specific Criteria for MM_MATBEL
    ARC_MM_MATBEL_WRITE Check Add-On-Specific Data for MM_MATBEL
    MB_CHECK_LINE_BADI BAdI: Check Line Before Copying to the Blocking Tables
    MB_CIN_LMBMBU04 posting of gr
    MB_CIN_MM07MFB7 BAdI for India Version exit in include MM07MFB7
    MB_CIN_MM07MFB7_QTY Proposal of quantity from Excise invoice in GR
    MB_DOCUMENT_BADI BAdIs when Creating a Material Document
    MB_DOCUMENT_UPDATE BADI when updating material document: MSEG and MKPF
    MB_MIGO_BADI BAdI in MIGO for External Detail Subscreens
    MB_MIGO_ITEM_BADI BAdI in MIGO for Changing Item Data
    MB_RESERVATION_BADI MB21/MB22: Check and Complete Dialog Data
    Following are the user exit for the same:
    MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
    MBCF0002 Customer function exit: Segment text in material doc. item
    MBCF0005 Material document item for goods receipt/issue slip
    MBCF0006 Customer function for WBS element
    MBCF0007 Customer function exit: Updating a reservation
    MBCF0009 Filling the storage location field
    MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011 Read from RESB and RKPF for print list in MB26
    Vishnu.

  • Passing validation(ob28) for particular company code at the time of posting

    Hi Gurus,
    My business requirement is creation of new company code for recalculation of accrual amount. where in these recalculated amount will be posted to new company code, however we had defined some validation (ob28) for document posting. so my query related to is it possible to pass all the validations for this new company code  at the time of posting?
    your response will be highly appreciated
    Thanks & Regards,
    Jamuna

    Hi,
    My requirement is to create new company code, and whenever the document will be posted during the posting whatever validations has been defined with respective to document posting should be restrict for new company code.
    so wheneever business will try to post the document for new company code all the existing validations will be by pass for document posting.
    Thanks,
    Jamuna

  • Assigning the Authorization group to particular transaction code

    Hi,
      How do we Assign the Aughorization group to particular Transaction code with authorization object. Is there any transaction code ?
    if anyone know, please let me know.
    With Regards,
    Prasad.

    The Tcode is tied to a Program & you can assign the Program to an Authorization Group via its attributes. I don't think there is an option to directly attach a Tcode to an Authn Group.
    ~Suresh

  • How can i identifiy the BAPI Name for particular transaction.?

    Hi friends ,
    In  data upload by BAPI How can i identifiy the BAPI Name for particular transaction.?
    For example ME21 How can i identifiy the BAPI Name?
    arun

    hi,
    check the link:
    ME21 tcode for Purchase Order creation so u can make use of BAPI f4 help i.e. ex-BAPIpo
    for list of all bapis
    http://www.planetsap.com/LIST_ALL_BAPIs.htm
    BAPI-step by step
    http://www.sapgenie.com/abap/bapi/example.htm

  • User Exit or BADI for Updating Tax code (MWSKZ) using ME21N

    Hi all,
    I am trying to fin out an exit or badi for Updating Tax code (MWSKZ) and Unit of Measure in transaction ME21n.
    The scenario is like this...
    For Purchase Orders Tax code will be defaulted from Purchasing info record or contract or parameter id for that item-vendor-plant.
    If the Tax Code is not defaulted and account assignment is blank then tax code on the PO is updated according to the below mentioned table
    Table
    Supplying Plant/              Receiving Plant                      Tax code
    Vendor/Country
    Any plant/vendor/
    country                           5050(NA)                               20
    2300                              6700                                     E0
    If the tax code on PO cannot be updated by the above table, then buyer needs to put tax code on the purchase order manually.
    Thanks,
    Shiva, Bangalore

    Hi Siva.,.,.,
    These r the exits.,..,which will be called while calling ME21N/ME22N/ME23N
    EXIT_SAPMM06E_006
    EXIT_SAPMM06E_007
    EXIT_SAPMM06E_008
    EXIT_SAPMM06E_009
    EXIT_SAPMM06E_012
    EXIT_SAPMM06E_013
    EXIT_SAPMM06E_014
    EXIT_SAPMM06E_016
    EXIT_SAPMM06E_017
    EXIT_SAPMM06E_018
    U want to default some values while the Initial screen will come right,
    while u Enter ME21N in command Prompt.,.,two exits will get triggerd,
    EXIT_SAPMM06E_014
    EXIT_SAPMM06E_016
    If u want to Default some values u can use these two exits.,.
    Try using EXIT_SAPMM06E_016.,.this will solve ur purpose.
    and if the user changes some values on screen.,,and you want them to get reflected .,.,.that means if user changes and saves data .,.
    While saving.,.,EXIT_SAPMM06E_012 and EXIT_SAPMM06E_013 will get triggerd
    Try using EXIT_SAPMM06E_013.,,.it was somehow the same requirement as mine.,.,IN my case it worked fine.,.,
    Regards
    Debasish
    Message was edited by:
            Debasish Das

  • How to customize SAPlogon so that the user cannot enter transaction code?

    I use PFCG to create a role which limit the choices of menu.  I create a user and set the role to the user.
    I would like to disable or hide the COmmand Field so that the user cannot enter transaction code directly.
    Is it possible to do so?
    If yes, would anyone show me how?
    Any discussion is welcome.

    anyway you are going to restrict the user authorization vai role, insted of going throught the whole tree to execute the tcode there is shotcut as command line. here you can save much more time for the user insted going through the tree always. there is no harm for the system if you keep the command line option. What and why you think it should be disabled?
    Cheers,
    -Sunil

  • BADI for F150 Transaction

    Hello evrybody,
    For T-code ' f150 ' package is FIBP.
    My requirement is to make some changes in dunning ,
    but i couldn't fina any BADI's or enhancements for that transaction,
    there is a userexit but it is not helpful to me.
    So is there any other options.
    Thanks in advance
    Regards
    Ravi

    hi Ravi chandra,
    There are no badis for that transaction and there is only one exit for this transaction.
    Enhancement
    F150D001                                Indiv. customer exits in prog. for printing dunning notices.
    I think the above exit will  satisfy your requirement.
    Since it is in FI module try for some BTE's if not go for modification.
    Reward points if usefull,
    Thanks,
    Kalyan.

  • User exit/ badi for fb02 transaction

    Hi,
    what are the appropriate user exit/ badi for fb02 transaction for a disabling(graying out) a
    payment block field for particular users..?
    Regards,
    Avi

    Following are the exits available for FB02
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002            FIDCC1: Change IDoc/do not send
    F050S003            FIDCC2: Change IDoc/do not send
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001            Balance Sheet Adjustment
    FARC0002            Additional Checks for Archiving MM Vendor Master Data
    FEDI0001            Function Exits for EDI in FI
    RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00            Line item display: Checking of selection conditions
    RFKORIEX            Automatic correspondence
    SAPLF051            Workflow for FI (pre-capture, release for payment)

  • How can we now the tables for a transcation code

    dear experts
    in 4.6c we can fiend out the tables for trasaction code by using TC:SE49.
    in 4.7 and ECC6 how can we fiend out the tables,which are used for a transaction code?

    Hi,
    TO Find table used in  a particular Transaction.
    Goto Txn ST05
    1. Activate trace wih filter options
    2. Run the transaction for which u want to knw the tables in  a different session
    3. Click on every tab in that transaction.
    4. Again comeback to ST05
    5. deactive Trace.
    6. Display Trace
    Now you can the tables used in a particular transaction
    Thanks & REgards

  • BADI FOR WITHHOLDING TAX CODES SEARCH HELP

    HI,
    Is there any BADI for witholding tax code search help. i want to make some changes in it.
    field: WITHT
    Pls help.

    Please find the following BADIs which are called during the transaction FB60.
    BADI_FDCB_SUBBAS01
    BADI_FDCB_SUBBAS02
    PPA_CUST_BADI
    BADI_FDCB_SUBBAS03
    BADI_FDCB_SUBBAS04
    BADI_FDCB_SUBBAS05
    What release are you on? I have the same issue for 1042s, but here are some helpful links for turning on the extended withholding tax:
    http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/frameset.htm
    Defining withholding tax codes:
    http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/frameset.htm
    Reward points if found helpful....
    Cheers,
    Chandra Sekhar.

Maybe you are looking for