Restrict the user from seeing public objects

HI
How to avoid the user from see the other schema public objects
if i use odbc drive for crystal report and i am able to see other schema owner
objects
like ctxsys,dmsys,mdsys
even though it is coming from Public schema i try
revoke select on all_users from public;
it did not help
pls give me some solution how to avoid this

I'm not following you. What I suggested was (let's say it uses all_tables):
- create a local view called all_tables
- filter in that view anything you don't want to see
ops$oskar@test9i$ grant create session to u1 identified by u1;
Grant succeeded.
ops$oskar@test9i$ grant create view to u1;
Grant succeeded.
ops$oskar@test9i$ conn u1/u1
Connected.
u1@test9i$ select distinct owner from all_tables;
OWNER
CTXSYS
MDSYS
OPS$OSKAR
SYS
SYSTEM
WKSYS
WMSYS
7 rows selected.
u1@test9i$ create or replace view all_tables as select * from sys.all_tables where owner not like '%SYS%';
View created.
u1@test9i$ select distinct owner from all_tables;
OWNER
OPS$OSKAR

Similar Messages

How to restrict the user from accessing other screens before submittingdata

Hi All,
I have some screens developed in Webdynpro ABAP and all these have been linked to Portal as pages. In Portal If i click on the link in detailed navigation i can see the corresponding screen on the right side. Now in one screen i have to input some data and submit the data, Now my problem is if i enter some data and before submitting the data if i click on any other link in the detailed navigation, that corresponding screen is opening and all the data of the previous screen is lost.
Can any one suggest me, how can i restrict the user from accessing other screens before submitting the data of that screen from portal perspective.

Hi Prasanna,
The pages can be restricted from the user access by using the ACL permission or you can restrict the page by making invisible in navigation area which you do not want to show to the user . Open the page properties and select navigation category in the drop down and select the Invisible in navigation area property to yes.By default this property is No.Change the property for all pcd pages which want to hide from user access.
Hope this helps you...
Regards,
Rudradev Devulapalli
Reward the points if helpful....

Is it possible to restrict the user from creating a sibling and allow him to ONLY create child nodes in DRM?

When in a hierarchy, a user right clicks on a node to crate a new node, he has two options
-Child
-Sibling
Is it possible to restrict the user from creating a sibling and allow him to ONLY create child nodes?
Business cases:
1. different level nodes need to have different prefixes.
- Thus, the default prefix property definition uses the level number to assign a prefix
- Also, a validation, to ensure the correct prefix, uses the level number
But if the user can create a child and a sibling then the default prefix will only be right for a single case and not both.
Thanks

If the images are exactly the same size then make sure the layer with the mask
is the active layer and in the other documents go to Select>Load Selection and choose
your document with the layer mask under Source document and under channel choose the layer mask.
After the selection loads press the layer mask icon at the bottom of the layers panel.
MTSTUNER

How to restrict the user from making any changes in Sales order- item level

Hi to all
How to restrict the users from making any changes in sales order at item level if the same sales order is released by senior user through status profile.
Regards
Anish Parikh
Edited by: anish parikh on Jan 24, 2008 5:16 AM

Hi Anish,
This can be achieved through the roles and authorization.
This can be done through the basis team. they can create user profiles and roles.
For the roles they assign some transaction codes so that they can view the only assigned tr. codes.
Like that ur requirement can be done.
Also u can prevent the user to change any fields in the sales order screen (VA02). for that please modify the authorisations.
Hope i answers.
Reward points if useful.
Edited by: kaleeswaran bhoopathy on Jan 24, 2008 9:57 AM

Restricting the user from deleting a personel number

Hi All,
Can anyone help me in restricting the user from deleting a personel number.
Thanks & regards,
Venkat

Hi Venkat,
The utility menu will ultimately calls to PU00 so it doesnt matter , system wont allow him to delet.
You can try it out in quality if you want.
Award points if useful
Regards,
Bhupesh Wankar

How to Restrict the users from changing the Default variant of report.

Hello everybody,
The requirement is to restrict the users to save and overwrite the default layout variant (Layout for higher managenet)set for the report, but at the same time they should be able to change and save the other layouts for which they are having access.
I have written the logic in the program which is working fine for all the scenario when we execute the report. But the logic doesnt work if the user is selecting the layout on the output screen of the report.
for e.g if the user runs the report using the layout varaint for which he is having the authorization then he gets the all 4 options so he then he can select the layout for which he is not authorized and he can overwrite.
i have debugged and check as i have found that after the report output is shown all the layout paramater is controllled by the statndard SAP objects.
Can anyone help me out in this issue.
Thankyou in advance.
*to get the default layout variant.
w_save = 'A'.
if p_vari is initial.
    clear disvariant.
    disvariant-report = sy-repid.
    w_variant = disvariant.
    call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
      exporting
        i_save     = w_save
      changing
        cs_variant = w_variant
      exceptions
        not_found = 2.
    if sy-subrc = 0.
      p_vari = w_variant-variant.
    endif.
endif.
*logic to check user authorization to change the layout setting.
if p_vari = c_layout.
    if not sy-uname is initial.
      select single * from agr_users
              where agr_name = c_role
              and   uname    = sy-uname.
      if sy-subrc = 0.
        w_save = 'A'.
      else.
        w_save = ' '.
      endif.
    endif.
endif.
Regards,
Satish.

Hi Maine,
Thanks for your reply.
As you mentioned for your own program, you can control the parameter "I_SAVE", when calling "REUSE_ALV_GRID_DISPLAY".
so already i have use the same logic and control the parameter through I_SAVE and here i am calling method ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY instead of "REUSE_ALV_GRID_DISPLAY".
and it works fine when we execute the report but the logic doesnt work when the user tries to change and save the layout variant on the output screen of the report.
Regards,
Satish

Restrict the Users from doing Transactions from transactional Iview.

Dear all,
We are having some transactional iviews in EP7.0 and ECC 6.0. We want to restrict the enduser from doing transactions by entering the transaction codes.
1.Can we remove the command line
2.Can we restrict the user
We are using transactional iviews using connectors.
Reply asap
Thanks
Ravi.S

1) There is an its parameter you add in transaction SICF in the webgui service. It is something like ~noheaderokcode.
See here:
http://help.sap.com/saphelp_webas620/helpdata/en/96/c09788c65b11d480c100c04f99fbf0/content.htm
2) Backend authorisations define which transaction codes you have access to.
Paul

Is it possible to restrict the user from opening the WSDL page in a browser

Hello All,
The user should be able to send requests to the webservice, but not be able to view the wsdl file in the browser. How can we do this in Weblogic 10 ? is this configurable ?
We need to do this because, the webservice is going to be exposed to the outside world and we don't want everyone to be able to see the WSDL.
Thanks
Chandra

I don't know how to do that, but I would advise against relying on an architecture where you have to hide the WSDL to provide security. That's an illusion. If you fully expose the WSDL and then implement proper security mechanisms, even BASIC Auth under HTTPS, your service will be more secure than with a hidden WSDL.

How to restrict the user from Closing the PO when it is not matched yet

Hi,
Actually PO is finally closed in lines level without matching. Now the problem is how to restrict this in future so that the user can not finally close it when it is not matched.
Thanks
Kavya

Kavya,
Check the setup of Line Type . Check for Receipt Tolerance on the Line Type . It should not be 100%
Please let me know if you have any questions
Thanks
Navin

File Open/Save dialog Restrict the user path selection Is there any way?

Hello,
Is there any way by which we can restrict the user from selecting the path from the Folder Browser/ File Open/ File Save dialog boxes?
For example, I have a list of paths & want to allow the users to select from those paths or their sub folders. Is there any way to achieve this?
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay Pugalia

Hello Vinay Pugalia,
>>For example, I have a list of paths & want to allow the users to select from those paths or their sub folders. Is there any way to achieve this?
As far as I know, starting with Windows Vista, the Open and Save As common dialog boxes have been superseded by the
Common Item Dialog:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms646960%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
You could have a try to restrict the value of “look in”(shown in the opne dialog) and “Save in”(shpwn in the save dialog). If you want an example about the usage of this API, you could post a code sample request to:
https://code.msdn.microsoft.com/site/requests
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Restricting the user to operate DML's from SQL PLUS Environment

how to Restrict the user to operate DML statements from SQL PLUS Environment.

Once you restrict SCOTT user to not be able to do an INSERT command, the SQL*Plus returns an error for user SCOTT when he tries to execute an INSERT statement.
Note however, that this is enforced by SQL*Plus, not the database!
Look into the use of product_user_profile from Oracle documentation for more information.
SQL> insert into product_user_profile values('SQL*Plus', 'SCOTT', 'INSERT', NULL, NULL, 'DISABLED', NULL, NULL) ;
1 row created.
SQL> commit ;
Commit complete.
SQL> disconnect
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.3.0 - Production
SQL>
SQL> connect scott
Enter password:
Connected.
SQL>
SQL> insert into emp select * from emp ;
SP2-0544: invalid command: insert
SQL>
SQL>

Nu such object error when load the user from application

Hi..everybody
I'm new comer at Sun ONEDirectory Server
I've a problem when try to get the user from my application
I use ..getAttribute("cn=username");
always appear No Such Object, whereas I've created that user
Thanks

Hi,
The best way would be to first run an ldapsearch command on the directory server to check whether the user is present and then try to check it with your application.
You can use something like:
#ldapsearch -D "cn=Directory Manager" -w <password> -b "cn=username,o=users, dc=example,dc=com" "objectclass=*"
Cheers,

Restrict Standard User from not removing the COM-Addins registered under HKLM with Admin rights.

Hello,
I have developed a COM-Addin for word 2013 by VS 2013 and installed it under the HKLM with Admin rights. Now from an non-admin account, ie Standard User I'm able to uncheck that addin from the COM-Addins dialog and remove it also. Previously I have done the
same thing for word 2007 addins and if a non-admin user tries to uncheck it the warning "The
connected state of Office Add-ins registered in HKEY_LOCAL_MACHINE cannot be changed" pops
up. But this is not happening for office 2013 apps(basically word, excel and powerpoint).
This is happening for all Add-Ins installed under HKLM.
How can a Standard User be restricted from unchecking and removing the Office Addins registered under HKEY_LOCAL_MACHINE with same warning "The
connected state of Office Add-ins registered in HKEY_LOCAL_MACHINE cannot be changed" in
a pop-up box?
Regards, Sayan

Hi,
The behavior is changed since Office 2010. Office 2010 and Office 2013 allows a standard user to turn a per-machine add-in off by unchecking the add-in in the COM Add-ins dialog.
To restrict Standard User from not removing the COM Add-ins, we can try to add the add-in to
the Group Policy option: List of managed add-ins in the Office Group Policy template.
Word for example, the policy is under:
User Configuration\Administrative Templates\Microsoft Word 2013\Miscellaneous
To enable this policy setting, provide the following information for each add-in:
In "Value name", specify the programmatic identifier (ProgID) for COM add-ins, or specify the file name of Word add-ins.
To obtain the ProgID for an add-in, use Registry Editor on the client computer where the add-in is installed to locate key names under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Word\Addins.
To obtain the file name of an add-in, click the File menu in the application where the add-in is installed. Click Options, click Add-ins, and then use the Location column to determine the file name of the add-in.
In "Value," specify the value as follows:
To specify that an add-in is always enabled, type 1.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

How to set the item property to restrict the user to not to copy from above

Hi Guru's,
I have a requirement like, There were two items on the form name email Id, Confirm email Id.
I have to ristrict the user to not to copy from email Id item.. make him/her to enter the value into confirm email id item field manually.
How to set the item property to restrict the user to not to copy from above item and paste it in this item.
Please help.
Thanks!!

Just an opinion here, but that is about the dumbest requirement I have ever seen.
I am always annoyed by web sites that ask me to enter my email twice. I ALWAYS copy the email address from the original entry and paste it into the second one.
People enter their email addresses so often, it takes a real klutz to not get it right. And what makes you think that if they enter it twice, that they won't enter it wrong both times anyway???

I'm using "window.open()" to show one Calendar in a popup window. I can see that the popup is re-sizable. How can I prevent the user from re-sizing the popup?

I'm using "window.open()" to show one Calendar in a popup window. I can see that the popup is re-sizable. How can I prevent the user from re-sizing the popup? I have tried "resizable=yes|no|1|0" and that seems to be not working.

You can't prevent users from resizing a pop-up.
*https://developer.mozilla.org/en-US/docs/Web/API/window.open

Restrict the user from seeing public objects

Similar Messages

Maybe you are looking for