Restrict the values in the Query Designer

Hi Gurus,
I want to Restrict PLANT or SALES ORG values in the Query Designer, in the Query, PLANT has selected in the rows and having variable and SALES ORG is display attribute of the PLANT. In this scenario How can we Restrict the values?
Thanks in Advance,
Ravi.

Hi Ravi,
You cannot restrict values on the display attributes. Better change it to navigational attribute and check the box as navigational in the cube.
Regards
Ram

Similar Messages

Formula Logic for Dates in the Cell Editor in Query Designer

Hi All
We are on BI7. (This is in the Cell Editor in Query Designer)
I am trying to create a formula in one cell that enters a date based on the following logic (Lets call this formula A):
I also have a placeholder "Cell reference" for a Date in another cell in the Cell Editor (Lets call it B).
I also have two other dates in seperate cells in the Editor (Lets call them C and D)
What i need to do is check that either C or D are not blank i.e one at least has a date and if so enter the date that is in B in A.
My formula logic in (Cell A) at the moment is as follows:
( Cell C <> 0 ) OR ( Cell D <> 0) * Cell B
When I run the query It is coming back with either a 1 or 0 depending if there is a date in C or D.
What I want it to do is to display the actual date of 'Cell B' in 'Cell A' if ( Cell C <> 0 ) OR ( Cell D <> 0)
If the value of B is blank ie no date I also want A to be blank i.e not equal zero or a blank date ie 00/00/0000
Example 1
Cell A    08/09/2009
Cell B    08/09/2009
Cell C   15/03/2010
Cell D
Cell A should = 08/09/2009 as there is a Date in Cell C or D and if so enter the date of Cell B in cell A
Example 2
Cell A
Cell B    08/09/2009
Cell C
Cell D
Cell A should = BLANK as there is a NO Date in Cell C or D
Example 3
Cell A
Cell B
Cell C   15/03/2010
Cell D
Cell A should = BLANK as there is a No Date in Cell B although a Date in cell C or D.
Thank you for assistance in advance
Kind regards
Stevo

Hi there,
It seems you have done almost everything...
What it seems that is missing is probably the cell reference for Cell C and for Cell D, or did you forget to mention it here?
So here it is the big idea:
- In the Cell Editor of the query designer, create a new cell reference for Cell C, let's name it ref_cell_c;
- In the Cell Editor of the query designer, create a new cell reference for Cell D, let's name it ref_cell_d;
- In the Cell Editor of the query designer, create a new cell reference for Cell B, let's name it ref_cell_b;
- In the Cell Editor of the query designer, create a new formula for Cell A, let's name it form_cell_a;
The form_cell_a should be created by the following:
( COUNT(ref_cell_c) + COUNT(ref_cell_d) ) * ref_cell_b
So COUNT(operand) returns 1 if operand is different of 0 else it returns 0; So if ref_cell_c has any valu or ref_cell_d has any value it should return the value of ref_cell_b.
Please note that with this formula, if you have values in both ref_cell_c and ref_cell_d this formula returns 2 * ref_cell_b, which is not what you pretend, I'm assuming you'll have value only for the following combinations:
ref_cell_c has value but ref_cell_d don't have any
ref_cell_c don't have any value but ref_cell_d has a value
ref_cell_c don't have any value neighther has ref_cell_d any
Diogo.

Creation of a Query to show the values for the current month and the last 12 months data.

Dear All,
Good day!
I have to create a Query with the below requirement.
I have to create a Query to show the values for the current month and the last 12 months data.
Can you please guide me how to achieve this ??
thank you,
Regards,
Hema

Hema
explain the exact problem..? as you mentioned you want to create query to show values for current month and last 12 months.. so I think you want to show values for 12 months from current data.. you can achive this by multiple way..
you can have selection screen and field with date .. and restrict based on system current date and 12 months before or you can handle this at your target.. .. I mean there are multiple ways to restrict data by date range..
for some more hints..
http://www.forumtopics.com/busobj/viewtopic.php?t=34393&sid=7fba465d0463bf7ff5ec46c128754ed6
http://businessintelligence.ittoolbox.com/groups/technical-functional/cognos8-l/how-to-display-last-12-months-in-report-based-on-todays-date-3231850
http://scn.sap.com/thread/3217381
search on SDN you will get many other ways..
Thanks,
Bhupesh

Can i get the history tab in query designer in bw 3.5 version

can i get the history tab in query designer in bw 3.5 version plz help me.

Hi,
yes..
do this..
Go to SPRO->IMG->SAP NEtweaver->SAP BIW->Reprting-relevant Settings->General Reporting Settings in BEx->Activate personalization in Bex.
Regards,
San!

Not Able to get to the values from applet while designing from xml

Hi All,
I have a new problem, and i am new to this one.
Like I have an XML file.Where in i am able to design the applet while getting the values from the xml and i am able to store also.
But the problem comes over here.I have given out a type field in xml.By validating the type field i am able to get Label(),TextField(),etc.,( whatever it is).While displaying i am giving only one single TextField in the init method and i am looping it up.so that i can get the no of text fields ,labels,text areas,etc.,
so problem comes here.I am not able to get the values from those text fields.(only i am getting the last value.Last value is overwriting the old values.Now i am able to get the last value that i am giving it lastly.)
So please can anyone give me some idea.As it is urgent to me and i have to submit urgently.
Please help me out.And Thanks In Advance.

Here is the sample code while designing the applet:
String type = (String) typeList.get(j);
                         String option = (String) optionList.get(j);
                         if(type.equals("text")){
                              txtdisp = new TextField(15);
                              leadcomp.add(txtdisp);
//                              txtdisp.addMouseMotionListener(this);}

Query the value of the environment ORACLE_HOME

I have this problem where I have to call CTX_DDL.OPTIMIZE_INDEX and log the results using CTX_OUTPUT.START_LOG, and I have to tell the user where the log file is. The problem is that I don't know where the log file is being written to.
According to the documentation on START_LOG [1], the file is written to the value of the LOG_DIRECTORY, which I can get with the query:
SELECT PAR_VALUE FROM CTXSYS.CTX_PARAMETERS WHERE UPPER(PAR_NAME)=UPPER('LOG_DIRECTORY')
But this value is NULL in our case, so the log file is written to +%ORACLE_HOME%/ctx/log+. All well and good if you know what the value of %ORACLE_HOME% will be on the server. But I don't know. I would have liked a query such as
SELECT VAR_VALUE FROM V$ENVIRONMENT_VARIABLES WHERE VAR_NAME='ORACLE_HOME'
But I can't find any table or view to query or any PL/SQL function that will give me this value. Does anyone know of a way to get this value?
This is Oracle 10g.2 running on Windows Server 2003 and Windows Server 2008.
Thanks.
-- Darren --
[1] http://download.oracle.com/docs/cd/B19306_01/text.102/b14218/coutpkg.htm#sthref1887

But I can't find any table or view to query or any PL/SQL function that will give me this value. In some blogs, I've seen this done by calling the package DBMS_SYSTEM.
Unfortunately, it's an undocumented package so I would never use it in production code.
Can you derive the value somehow by querying v$parameter? Maybe background_dump_dest? Of course, this isn't guaranteed.

How to restrict some values in the final report output.

Hi Experts,
I have scenario where I dont want to include the values in the output of report.
If you observe above there are some un assigned cost elements and its the report output. I dont want these to be in the report.
Please suggest me.
Thanks,
Ravi

Hi Friends,
Thank you for the reply.
I tried to exclude the values, but i dont find any chance to exclude them
If i try the same from characteristic restriction, its allowing me to exclude.
Is there any other possibility to restrict these? Please suggest

Restrict WERKS values in the output of simple ALV(using REUSE_GRID_DISPLAY

Hi ,
I have one requirement as follows:-
--> I want to restrict WERKS values in the output of simple ALV(using REUSE_GRID_DISPLAY).
currently the values ae displayed from standard search-help.
I want to fields WERKS(MRP Type) values from table T001W with field VKFLZ = 'B'.
Now the fieltered values should be displaeyd in ALV output.
I was thinking of using the event, but i cannot find appropriate event where i can code my changes...please suggest
Thanks in Advance.

Hi Sandeep,
    I have the events in IT_EVENTS table.
    None of them i find suitable event for restrcition of F4 vaues in field werks.
    CALLER_EXIT
USER_COMMAND
TOP_OF_PAGE
TOP_OF_COVERPAGE
END_OF_COVERPAGE
FOREIGN_TOP_OF_PAG
FOREIGN_END_OF_PAG
PF_STATUS_SET
LIST_MODIFY
TOP_OF_LIST
END_OF_PAGE
END_OF_LIST
AFTER_LINE_OUTPUT
BEFORE_LINE_OUTPUT
REPREP_SEL_MODIFY
SUBTOTAL_TEXT
GROUPLEVEL_CHANGE.
Please suggest, what other options we can have on this.
Thanks in Advance.

Not able to view the values on the report viewed using Query Report Viewer

Hi all,
There seems to be some unknown problem with the Report Template I have prepared and uploaded on PIA XML Publisher. When I run it with some ID set, it doesn't seem to show the values from the Data I give. For example if I have a field called ChartField in my report Template, It doesn't seem to get populated when I do SetID.
Why is it so?

Hi all,
select bdmng from resb into corresponding fields of table it_stpo2
            for all entries in it_stpo
             where matnr = it_stpo-idnrk
             and xloek ne 'X'.
loop at it_stpo2.
    move-corresponding it_stpo2 to it_stpo.
    append it_stpo.
endloop.
In the above code, m able to fetch the records in the table it_stpo2. but the data is not gettin populated in the final internal table it_stpo. Both the internal tables it_stpo & it_stpo2 are same.
The data is gettin moved from it_stpo2 to it_stpo but only upto the header level. its not gettin appended in the table it_stpo even after using append stmt.
Plz help me to resolve this issue. its urgent.
Rgds,
Purva

Results based on From and To value in Bex query designer.

Dear all,
We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
How to get my requirement achieved in the Bex query designer.
Experts suggestion with steps will be very useful to solve my problem.
Regards,
M.M
Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

Hi Magesh,
I think you could try one more way.
Create a formula inserting your two formula variables for limits .(FV - are ready for input ) .
The formula would return the result as 1 or 0 because it would have boolean condition in it.
You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
You formula A would look like
( KF > FV1) AND (KF < FV2) * 1.
And in the condition put A EQ 1.
You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
Regards,
Sunmit.

Capturing the Value in the Variable

Dear Friends,
There is a requirement to capture the value of the document date while the report is getting executed. i.e., for each and every record in my report has different dates, my variable should get populated with the document date for every record.......How can i achieve the same.
Thanks
Prem

Hi Prem,
You need to crate a user exit varable in your query and write a abap code to capture value and fill it.
Thanks,
Ravi

How to get the values from the resultset???

I have a problem with this code given below,
i am executing an sql query which return a union of values from two tables.
the problem here is how do i read the values from the resultset.
here is the code....
package com.webserver;
import java.sql.*;
public class UnionDemo{
public static void main(String args[]){
Connection connection =null;
Statement statement =null;
ResultSet rs =null;
try{
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
connection = DriverManager.getConnection("jdbc:oracle:thin:@:1521:ORCL","scott","tiger");
statement = con.createStatement();
rs = statement.executeQuery("(select tablename from node where appid=432) union (select tablename from uomnode where appid=432)");
ResultSetMetaData rsmd = rs.getMetaData();
int numberOfColumns = rsmd.getColumnCount();
while (rs.next()){
System.out.println(rs.getString(1));
// instead of rs.getString(1) I also used rs.getString("tablename") but of no success....
}//end of while
}catch(Exception exp){
exp.printStackTrace();
finally{
try{
if (rs!=null) rs.close();
if (statement!=null) statement.close();
if (con!=null) con.close();
}catch(Exception exp1){
exp1.printStackTrace();
}//end of finally
}//end of main
}//end of class
when i execute this program i get an oracle error ORA-01009
which says (java.sql.SQLException: ORA-01009: missing mandatory parameter)
can anyone help to retrieve the values from this resultset...
thanx

[cut]
i am executing an sql query which return a union of
values from two tables.
the problem here is how do i read the values from the
resultset.[cut]
When the error occours?
1) Executing query ?
2) Retrieving the field from the resultSet ?
3) ecc. ?
BTW, first of all, try to execute the query removing the parenthesis
of the two select statement. I know that there are some problem
with the oracle jdbc driver about them.
Hope it helps.

How to get all the values of the SDO_ORDINATE_ARRAY of a Oriented Point

Hi,
I'm trying to get the values of a Geometry wich is an Oriented Point. To that, i'm using SDO_UTIL.GETVERTICES, but this utility only obtains the point X,Y, it doesn't obtain the values of the orientation vector.
The Geometry is this:
MDSYS.SDO_GEOMETRY(
     2001,8307,NULL,
     MDSYS.SDO_ELEM_INFO_ARRAY(1,1,1,3,1,0),
     MDSYS.SDO_ORDINATE_ARRAY(-75.586088632813272,6.1794352615514194,0.57278169530235967,-0.81970795380217887,0)
The query is this:
SELECT c.ipid, c.nombre, t.X, t.Y, t.Z, t.W
FROM Hidrantes c,
TABLE(SDO_UTIL.GETVERTICES(c.geometria)) t
where c.ipid = 4691117
ORDER BY c.ipid, t.id;
Result:
4691117          -75,5860886328133     6,17943526155142          (null) (null)
As you can see, it only obtains the X,Y values but not the values of the orientation vector, how can I get the values?.
Thanks in advance

Tobonale,
Sql-Only approaches:
*[1] Return Oridinate Array*
Append .SDO_ORDINATES to your geometry object or column name:
SELECT MDSYS.SDO_GEOMETRY(
     2001,8307,NULL,
     MDSYS.SDO_ELEM_INFO_ARRAY(1,1,1,3,1,0),
     MDSYS.SDO_ORDINATE_ARRAY(-75.586088632813272,6.1794352615514194,0.57278169530235967,-0.81970795380217887,0)
).SDO_ORDINATES
FROM dualResult:
SDO_ORDINATE_ARRAY(-75.586089, 6.17943526, .572781695, -.81970795, 0)*[2] Return Flattened Oradinate Array*
SELECT * FROM
TABLE (
     MDSYS.SDO_GEOMETRY(
     2001,8307,NULL,
     MDSYS.SDO_ELEM_INFO_ARRAY(1,1,1,3,1,0),
     MDSYS.SDO_ORDINATE_ARRAY(-75.586088632813272,6.1794352615514194,0.57278169530235967,-0.81970795380217887,0)).SDO_ORDINATES
)Result:
-75.586089
6.17943526
.572781695
-.81970795
           0Regards,
Noel

How to find out the values of the pagecontrol

Is it possible to find out the values of the pageitems in the request?

hi
keith posted an excellent code snipplet in the subject "A way to convert selection from query builder in DML language ", which can be found here :A way to convert selection from query builder in DML language
ny tweaking the settings, you can retrieve the dimension members on the page axis, assuming that this is what you intended
regards,
thomas

How to add a column to a list created with the Dynamic List Wizard to display the values of the fiel

Hi,
ADDT, Vista, WAMP5.0
We have 2 tables: clients_cli (id_cli, name_cli, tel_cli, and several more fields) and cases_cas (id_cas, idcli_cas, court_cas, and a lot of other fields).
Clients may have many cases, so table cases_cas have a foreign key named idcli_cas, just to determine which case belongs to which client.
We designed the lists of the two tables with the Dynamic List Wizard and the corresponding forms with Dynamic Form Wizard.
These two forms are linked with the Convert Dynamic List and Form Wizards, which added a button to clients list named "add case".
We add a client and then the system returns to the clients list displaying all clients, we look for the new client just added and then press "add case", which opens the Dynamic Form for cases, enter all case details and everything processes ok.
However, when we view the cases list it display all the details of the case, including the column and values for the foreign key idcli_cas. As you can image, it is quite difficult for a human to remember the clients ids.
So, in the cases list we added a another column, named it Name, to display the names of the clients along with cases details. We also created another recordset rsCli, selected the clients_cli table, displaying all columns, set filter id_cli = Form Variable = idcli_cas then press the Test button and everything displays perfect. Press ok.
Then, we position the cursor inside the corresponding cell of the new Name column, go to Bindings, click on name_cli and then click on insert. The dynamic field is inserted into the table cell as expected, Save the page, and test in browser.
The browser call the cases list but fails to display the values of the Name column. The Name column is simply empty.
This issue creates a huge problem that makes our application too difficult to use.
What are we doing wrong?
Please help.
Charles

1.     Start transaction PM01, Create Infotype, by entering the transaction code.
You access the Create Infotype screen.
2.     Choose List Screen.
3.     In the Infotype no. field, enter the four-digit number of the infotype you want to create.
When you specify the infotype number, please remember to enter any leading zeros.
4.     In the Screen Number field, enter the screen number of the list screen you want to enhance.
5.     Choose Create.
The Dictionary: Initial screen appears:
6.     Create the list screen structure.
7.     Choose Activate.
8.     Return to the Enhance List Screen in the Enhance Infotypes transaction (PM01).
9.     Choose Create All.
The additional fields are displayed on the list screen, however, they contain no data.
The fields can be filled in the FORM routine FILL-LISTSTRUCT in the generated program ZPnnnn00. The FORM routine is called for each data record in the list.
Structure ZPLIS is identified when it is generated with a TABLES statement in the program ZPnnnn00.
The fields can be filled from the Pnnnn structure or by reading text tables.

How can can i subtract the value of the column in each row ?

I want to subtract the value of the column in each row if the row is not enough then continue to next row.
For example
ID QTY
A 20
B 40
C 60
I want to update this table by subtract the value of the column (QTY) out 70 so the result i want will be
ID QTY
A 20 - 70 = -50 --> 0 this row will be updated to 0 and 50 will continue to next row
B 40 - 50 = -10 --> 0   this row will be updated to 0 and 10 will continue to next row
C 60 - 10 = 50 --> Stop loop
How can i write the sql query for this operation , Thanks

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. You have no idea,
do you? Temporal data should use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums. What did you try on your own before posting? I will bet that you did nothing! You expect other people to do your job or homework for you.
>> I want to subtract the value of the column in each row if the row is not enough then continue to next row. <<
This makes no sense. Rows have no ordering; that is a spreadsheet. There is no such thing as a generic “id” in RDBMS. And an identifier is not a sequence which would have an ordering.
CREATE TABLE Foobar
(something_seq INTEGER NOT NULL PRIMARY KEY,
onhand_qty INTEGER NOT NULL);
Learn how to use the SUM()OVER() and LAG() aggregate functions, post what you tried for yourself and then we will help you.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Restrict the values in the Query Designer

Similar Messages

Maybe you are looking for