Restrict to change the released document

hii all,
i am seeking for a suggestion whether its avalable in standard sap or not.
i want to restrict to change the released document. once,document has released, then chage shud not affect.
thanks.

Hi,
For this you only need to set the changeablity from the release indicator to "1".
Best Regards,
Arminda Jack

Similar Messages

PO status if you change the release strategy procedure

What will happen to the half released PO/PRS if we change the release strategy?

Hi,
It won't Happen for Half release PO Document. The rerelase will get affect once the final release done or No release initiated to the document.
SAM

Change the reverse document type for RE.

Hi,
We want to change the reverse document type for document type RE, can any one sugget the possible negative impact.

hi
kindly note that if you are creating a new document type to be assigned as the reversal document type for RE then you need to assign the appropriate number range interval for the year.
if you are going to assign an existing document type as the reversal document type for RE then you will not be able to distingush the past and the new documents generated as both of them shall belong to the same document type.
regards
eashwar
Edited by: eashwar1 on Apr 15, 2010 2:38 PM

BAPI to update/change the accounting document

Hi all,
Is there any BAPI to update or change the accounting document.
I am aware of the BAPI_ACC_DOCUMENT_POST which is used to post the document.
Please reply soon.
Thanks and regards,
Anishur

Hi Anishur,
Try this.,,,
BAPI_CTRAC_DOCUMENT_CHANGE
Regards,
Sai

Change the Accounting document fields cost center and profit center

Dear Experts,
User has posted document with wrong profit center
For that we subjected that he can go to the profit center actual posting T.Code 9ke0 but with that he can only change the Profit center document with that there is no accounting side updating
I have tried with Document Change Rules, Line Item for fields cost center and profit center in that while configuring I did not get any error message,
But in the document I am unable to changing the same fields cost center and profit center
Can any body please guide me to resolve the issue?
Essentially I want to change the Accounting document fields cost center and profit center
Thanks in Advance,
Wiswanath

Hello,
Once the documents are posted in FI module, the system doesn't allow anybody to change the cost objects (cost center, profit center, internal order). The only fields you can change through FB02 transaction are the Line item text (BSEG-SGTXT) and the assignment (BSEG-ZUONR).
If you want to get a change to the cost object to be reflected from FI to CO, you should reverse the FI documents with wrong cost objects and post new documents with correct cost center, profit center.
Hope it helps you.
Cheers,
Daniel.

Restricting for creating the Billing Document without PGI in STO Process

We want to restrict creating the Billing Document without PGI in STO Process
Delivery Type:NL
Item cataogory:NLN
Billing Type: JEX Profroma Invoice
I have check in VTFL
At Header Level, Routine - 003. for normal sales process LF-F2
At Item Level , Routine - 004
in VTFL-- NL-JEX
At Header Level, Routine - 009.
At Item Level , Routine - 010. here when i changed to 003 and 004 for NL and JEX
i am getting error after PGI when i am doing vf01 error is coming " document is not relevant for Billing"

Hi
Kindly do the belwo
1. goto the t code VOV7 item category determination and select the item category and put the billing relevance as "A"
2. once the step 1 is completed then it will show the billing relevant status AS "A"in the delivery documnt at the item level
The above configuration will be applicable in the new documents only
Regards
Damu

Security settings to not allow Changing the PDF Document

I'm trying to create PDFs where users can do anything they wish to the PDF document including Document Assembly but not Changing the Document (i.e. modifying the original text).
Looking at the security settings in Acrobat, I can't seem to find an option that would only limit Changing the Document and nothing else. Is there a way this can be done?

> In how we're going to end up using the secured document - no.
But in the way that Acrobat views it - yes.
I suppose you could "try" to outline the text before PDFing it. Whether you can do that will depend on what application you are using to create the original document.

Change the FM Document from MIRO (using BTE)

Hi,
At the moment to post the document from MIRO, I need to change the fields Commitment Item (FIPOS) and Funds Center (FISTL) of financial accounting document in order to FM document takes the new values.
I Used the FIBF with a BTE (Event 1120), the fields FIPOS and FISTL in the financial accounting document were changed but the FM document does not take the new changes.
Somebody can help and determine which can be the problem or if I need to do something different.
Thanks a lot.
Sandra M. Pulido

Hi,
This is my code in the function:
    LOOP AT t_bseg.
        READ TABLE T_BSEGSUB WITH KEY TABIX = v_tabix.
        t_bsegsub-fipos = v_fipos.
        t_bsegsub-fistl = v_fistl.
        MODIFY T_BSEGSUB INDEX v_tabix.
    ENDLOOP.
You can see that is the same like yours and changed the values in the financial document but this last one is the base for the other document (FM).
It's right that I can only substitute the field avalaible in the structure BSET_SUBST and these fields doesn't exist in structure but with an append structure I did.
Thanks for your answer,
Sandra M. Pulido

Will releasing my app in iTunes connect change the release date?

Hi there,
I have an unusual situation. We submitted version .9 of our app to the appstore, and it was approved. Even though the game is not done, we did this because we wanted a version that we could submit to the Indiecade festival (deadline today!), and we wanted to be able to send them a promocode rather than have to go through all of the hoops of UDID and all that.
We have a release date set for far in the future, and we also have the game set to 'pending developer release'.
Even though the game was approved and is ready for us to 'release' to the store, it wont yet spit out promocodes for us yet, because it is not 'live'. I want it to go live, but not actually be available on the store. I think this will work, I'm just concerned that if we push that button, it will change our release date and actually make the game available on the app store.
Can anyone confirm that this is NOT what will happen? I hope I'm making my situation clear. Thanks very much.
Chris

I would suggest you contact the iTunes Store via your iTunes Connect account and ask them. That's the way you'll get definitive answers; we're all just fellow users here.
Regards.

Trying to change the Release/Debug connection string (ORACLE) of a VS13 Lightswitch project. Getting ORA-00942 error...

Hello,
i try to change the connection string of a Lightswitch 2013 project. I have a database for developers and a 'productive' database for releases. Both are similar (table names, entries etc..) and they are from ORACLE. First i attached the developer database
as an external source. Everything works fine. Now I'm trying to change the connection string whether my application is in a release state or in a developer state.
I found a hint in the following question to solve that issue: Question
from a LS-User
It is possible to change the connection string during the runtime. I tried it out and added to my DataBaseService.lsml.cs:
partial void DataBase_InitializingConnection(DatabaseConnectionState state)
state.ConnectionString = "DATA SOURCE=DB.productive;PASSWORD=password;PERSIST SECURITY INFO=True;USER ID=USER_PROD";
Well, Lightswitch is using the new connection. But when i run the application, i am getting the error "ORA-00942: table or view does not exist". The views and tables definitely exist. The two schemas are the same. So what am i doing wrong?
Regards from Munich

HI Munich,
Welcome to Lightswitch forum.
According to your description above, you want to connect to external datasource in Lightswitch application.
Oracle is not a supported data source for LightSwitch, it's recommended to use SQL Server database.
If you want to change the connection string, you can update the connection string for a data source using the data source wizard. For example in VS2013:
Please let me know if there is anything that I can do to help.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to change the release of the sesment?

Hi gurus:
I have created a custom segment type Z automatically when i release the segment the system set the release of my segment at 700 (the release of my SAP), but i have to set the release at 640. How can i do?
alex zhang

Hi
When your system release at 700 , how can you set the release status of your segment for 640, I think its not possible.
in WE31 when we create the Segments and release them( from menu EDIT-> set release/Cancel release), By defualt it will get released as per your system version.
<b>Reward points for useful Answers</b>
Regards
Anji

Is it possible to change the PDF document on my website through in-browser editing after I've published my website?

I've uploaded site but want to change PDF asset through in browser editing. Is this possible?

Hi,
It is not possible to change the PDF asset using IBE.
Regards,
Aish

How to change the blank document to the real name that was assigned

i started using numbers.i can see two documents blank i and blank 2 .i need to click on the document to see the name that i gave.what should i do to see the list of the documents and name when i open numbers
david

Hey There I didn't need to change it as it shows my correct name in my icloud account. The problem is on my Mac where it still shows my Full name as my partners name.
For eg. if I send an email from "Mail" on mac and I use my icloud account then the name that shows up is my partners name when the email is received. If I send an email from the Icloud Mail box that I log into on my browser then the name that shows up when the email is received is my name which is correct.
When I go into preferences in "Mail" on my Mac to change my name, the name is ghosted out and doesn't allow me to change it ! ? It is here that it still show my partners name ?

How do I change the release date on a TV show in iTunes release 12?

Every show and movie that I bought gives a date of 12/31/1903 on the description page and in each individual info page it shows 6/5/05. This ***** if you want to sort by date.
Thanks in advance...

Hi Daniel Reilly,
I understand that your TV show episodes may be showing an incorrect release date. I would like to recommend that you report an issue with these purchases using this link:
Report an problem with an item you bought from the iTunes Store, App Store, Mac App Store, or iBooks Store
http://support.apple.com/kb/ht1933
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

How do I change the "view documents in PDF/A mode" to never through the registry

Hi All,
We manage over a hundred windows boxes and we're having issues with some of the PDF forms displaying in PDF/A mode, even when they're saved as regular PDFs. We have an enterprise patch management through which I can make a change to the registry of all the computers. Is there such a registry entry that I can change to set this value to "never"?
Cheers,
Kieren

Hi there kimtullis,
You may find the information at the website below helpful.
Browse and play
http://help.apple.com/iphone/7/#/iph3cf21a82
-Griff W.

Restrict to change the released document

Similar Messages

Maybe you are looking for