Restricting Query in Query Designer
Hi All,
I have to create new report on top of multiprovider which already as other reports on it.
The report should contain Plant, Billing Document number, Customer Group, customer group1, Ship to, Sold to, Invoice Amount.
All fileds are available in the multiprovider, all the Ship to numbers are different to Sold to numbers but texts are same for few records. So I need to excule those records where as Ship to texts are equal to Sold to texts.
Anyone know how to acheive this in Query designer level, where as I can't change anything in multiprovider because we have other queries on that.
Thanks.
HI,
You will have to write a customer exit for this. And logic for this would be : you will have to compare both Ship to texts and Sold to texts and you will have to pull only those records for which Ship to texts are equal to Sold to texts.
Once you got all the values of Ship to and Sold to for which they are equal (through Customer exit), you can create a variable and put it as a restriction for Sold to or Ship to.
Regards,
RJ
Similar Messages
-
Creating Restrictions in BEx query designer for (1-a), where a is variable.
Dear All,
>> Suppose for the variable in the BEx query designer, I've created restriction for 0FISCPER to the variable 0P_PER (as 0P_PER-1) by right clicking 0P_PER3, from that a dialog box appears. In that I've selected 0P_PER3 and then clicked on offset variable and when I set the offset variable, it works for (0P_PER-1.etc, 0P_PER+1,etc..)
But if I want to have (1-0P_PER), then plz tell me how to define this restriction?
Plz explain me the steps to perform (1-0P_PER) restriction in BEx query designer in BW1.
I'm using SAP BI 7.2 gui.
Expecting your reply soon,
with Regards,
JeraldMy requirement is that I want to have " 1-fiscal year"., But this I could not define using offset variables, since using offset we can define "fiscal year +1" or "fiscal year -1".
So there would be some other way to define "1-fiscalyear". So Please help me to define "1-fiscalyear" by giving me the steps.
Thank you,
with Regards,
Jerald -
Help me . Query in " Query Print layout Design "
Hi Everybody .
I Design Report by Query Print layout Design , So when I run Report , I see Message : " Table not found Administrator (OA DM)" .
This is My Query .
( Note :this Query is run ok in Microsoft SQL . )
Select Cast(left([dbo].[Get_rate](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType),5) as nvarchar(50))+ Cast(T0.BatchNum as nvarchar(50))As No_Number , T0.TaxDate As Date , case left(T0.Account,4)when '1112'then '0.00' when '1122'then'0.00' else [dbo].[Get_11](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType)end as Amount1 , case left(T0.Account,4) when '1111'then '0.00' when '1121' then '0.00' else [dbo].[Get_111](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType) end As Amount2 , T1.U_VNS_MEMO As U_VNS_MEMO, T1.U_VNS_VNUMBER as PV_No , T1.U_VNS_JType as 'Voucher Type' , T0.Account As AC_Code , T3.AcctName as Description , T0.Debit As Debit ,T0.Credit As Credit , T1.U_VNS_NAME, T0.U_VNS_REMARKS From BTF1 T0 Inner Join OBTF T1 On T0.BatchNum = T1.BatchNum Inner Join OBTD T2 On T0.TransID = T2.BatchNum Inner Join OACT T3 On T0.Account = T3.AcctCode Where T0.BatchNum = '[%0]' Group by Cast(left([dbo].[Get_rate](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType),5) as nvarchar(50))+ Cast(T0.BatchNum as nvarchar(50)) , T0.TaxDate , case left(Account,4)when '1112' then '0.00' when '1122'then'0.00' else [dbo].[Get_11](T0.BatchNum,left(Account,4),T1.U_VNS_JType)end , case left(Account,4) when '1111'then '0.00' when '1121' then '0.00' else [dbo].[Get_111](T0.BatchNum,left(Account,4),T1.U_VNS_JType) end , U_VNS_MEMO , T1.U_VNS_VNUMBER , T1.U_VNS_JType , Account , AcctName , T1.U_VNS_NAME, T0.U_VNS_REMARKS order by Amount1 desc
Please help me .
Thank you very much .
Message was edited by:
Tran Ba HaiNote: This Quey if I change = [%0] by = 1 , and I run Report in SAP is ok .
-
0ADHOC error while executing the query from Report Designer
Hi All,
When I am executing The Query from Report Designer, am getting the below error.
Please help me in this regard.
The initial exception that caused the request to fail was:
The Web template "0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
Thanks,
KVRHi,
The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
Best regards,
Janine -
Restrict user SELECT query time on a particular VIEW
Hi - I am trying to restrict user SELECT statemnet time on a particular view.There is a user called ABC and he is accessing many objects in database.All SELECT statments are fine execept when he query a particular VIEW.That view SELECT causing performance problem.So I am trying to restrict the SELECT query time on a VIEW.
Can you please help me to achive this task through some SQL command like ALTER USER etc...
Thanks for your help.user2538196 wrote:
Hi - I am trying to restrict user SELECT statemnet time on a particular view.There is a user called ABC and he is accessing many objects in database.All SELECT statments are fine execept when he query a particular VIEW.That view SELECT causing performance problem.So I am trying to restrict the SELECT query time on a VIEW.
Can you please help me to achive this task through some SQL command like ALTER USER etc...
Thanks for your help.It sounds like you are really trying to solve a performance problem with the view. I agree with Justin that the solution to restrict access to the view dynamically sounds unwieldy.
Consider tuning the view, or perhaps the query using the view. Post the view and see if anyone can help you tune it. -
Reg. Bex Error while opening query in query designer!!!!!
Hi Guys!!
Can any one help me in getting out of this issue.
I am getting BEx Error while opening query in query designer as below.
3:45:00 PM.400: Info: Query Designer Start. Revision: 500
3:45:06 PM.728: DEBUG ASSERT ### False - QDbCommandManager::.ctor - Method not called from CommandManager
-CALLING-FROM- 3:45:06 PM.728: DEBUG ASSERT ### False - QDbCommandManager::.ctor - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDfForm.InitFromCommandManager(QDbCommandManager iCommandManager)
at com.sap.bi.et.QueryDesigner.QDbCommandManager..ctor(QDbApplicationData iApplicationData, QDfForm iWindow)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Init()
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
3:45:07 PM.337: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.337: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Table View
3:45:07 PM.368: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.368: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Rows/Columns
3:45:07 PM.431: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.431: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Cells
3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Conditions
3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Exceptions
3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - InfoProvider
3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
-CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.NativeWindow.WndProc(Message& m)
at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
QDbCommandManager::DoViewCommand - Filter
QDbCommandManager::CommandExecute - Properties
QDbCommandManager::DoViewCommand - Properties
QDdEventDispatcher::MenuItemClickedHandler - Bar clicked: OpenQuery
QDbCommandManager::CommandExecute - Open...
OSDialogForm caught Exception: GetNodes: RFC Exception
-EXCEPTION-START- 3:45:19 PM.24: TRACE EXCEPTION ---
Exception Name: ObjectDisposedException
Exception Message: Cannot access a disposed object.
Object name: 'OSDialogForm'.
Exception at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at System.Windows.Forms.Control.Invoke(Delegate method)
at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
Full Stack: at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.AppDomainUnhandledException(Object iSender, UnhandledExceptionEventArgs iEventArgs)
at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at System.Windows.Forms.Control.Invoke(Delegate method)
at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
-EXCEPTION-END----
-CALLING-FROM- 3:45:19 PM.24: TRACE EXCEPTION ---
at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
at com.sap.bi.et.QueryDesigner.QDbApplicationData.AppDomainUnhandledException(Object iSender, UnhandledExceptionEventArgs iEventArgs)
at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at System.Windows.Forms.Control.Invoke(Delegate method)
at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
Thanks in advance
PeterHi
If I got your question properly, you have SAP GUI Installation issues , Try to install relevant Excel version too.
http://help.sap.com/saphelp_nw70/helpdata/en/9c/03a042b443c56ae10000000a155106/frameset.htm
BASIS Team can help you in this.
Hope it helps -
BEx Web: Java Error when calling query from Query Designer
When designing a query in the designer and executing it via the portal,
I get the following error:
com.sap.ip.bi.base.application.variableprocessor.IVariableProcessor.synchronizeStateVariables()V
The complete exception is:
com.sap.ip.bi.webapplications.runtime.controller.MessageException: Error while calling the method "processDialogCommand" at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2366) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:841) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:775) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:412) at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error while calling the method "processDialogCommand" at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java:116) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:439) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:325) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processCommand(CommunicationProcessor.java:144) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSuper(Page.java:1451) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandInternal(Page.java:1439) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSequence(Page.java:2022) at com.sap.ip.bi.webapplications.runtime.impl.Page.displayVariableScreen(Page.java:1845) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSequence(Page.java:2069) at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2755) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2288) ... 36 moreCaused by: java.lang.NoSuchMethodError: com.sap.ip.bi.base.application.variableprocessor.IVariableProcessor.synchronizeStateVariables()V at com.sap.ip.bi.webapplications.ui.dialogs.variablescreen.DlgVariable.doUiDialogInit(DlgVariable.java:259) at com.sap.ip.bi.webapplications.ui.dialogs.framework.UiDialog.doInit(UiDialog.java:164) at com.sap.ip.bi.webapplications.runtime.base.PageObject.init(PageObject.java:244) at com.sap.ip.bi.webapplications.runtime.base.Dialog.init(Dialog.java:72) at com.sap.ip.bi.webapplications.runtime.base.Dialog.processCommand(Dialog.java:168) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processDialogCommand(CommunicationProcessor.java:99) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java:101) ... 46 more
The HP LEvel on the Java Stack is 10, on Te ABAP Stack it is 11.
Any ideas?
Thanks in advance, ThomDid you check these posts:
Unable to publish in IE with BEx Query Designer
Web Analyzer Execute failed- System received an expired SSO ticket
null -
Want to edit existing query in query designer..
hi friends..
i have created the new query in query designer...
after opening that new query using query designer , i have a list of default values right hand side and then am placing the cursor on one default value which i have created now , at right most side we have general , display , hierarchy , planning , advance tabs
in the hierarchy tab i have an option called values of poseted nodes...what does it mean? except my newly created deafult value..all other fileds are checked with option called Values of posted node -->always show
for my newly created deafult value is having like " values of posted nodes --> can not determine defalut value
so now i want to change the above option to -->always show...but the hierarchy tab is totally disabled how can i enabled that tab? and change?
please help me...
thanks in aadvance..
regards
anandHi,
We are faced same problem that time we raised the sap note they provided below programme
ANALYZE_RSZ_TABLES once we run this programme after that we find some error.
Please check using this programme.
Thanks and Regards,
Venkat. -
Different in viewing the query in query designer and bex analyzer in BW Prd
hello...i transported the query from bw dev into bw prod successfully. when i view the query using query designer in prod, the query is the same copy of query in bw dev and QA but when i view the same query under the bex analyzer in prod, the query is not the same.
the correct query should be able to see 3 mandatory variable input but when i view it under the bex analyzer, only 1 mandatory variable can be seen here. Whereas when i view it under query designer, i can see the 3 mandatory variable being define there. And this query is assigned in one of the role as well.
any idea on this? thanks!!!i checked in rsrt in sap, the personalization of the variable is not in yellow color, i can see the 3 variable in bex analyzer but the other 2 variable which is a mandatory field input for that query appear as optional variable input instead of the mandatory field input...
-
Error while accessing Query using Query Analyzer
dear experts...
while accesiing the query using query analayzer...
we are getting below error...
What has happened?
URL http://xxx.xxx.xxx.xx:XXXX/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex call was terminated because the corresponding service is not available.
Note
The termination occurred in system BI1 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:001-u:ANAND-l:E-i:PSRCCPRDA003_BI1_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
thanks for helping me...
anandHi friends,,
instead of getting the link like
http://128.222.125.57:9000/sap/bw/bex?cmd=ldoc&infocube=ZMC_SRH1&query=AGINGV21A&sap-language=EN(working link)
am getting below link...which is getting an error....
http://128.222.125.57:9000/sap/bw/://:/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=AGINGV21A
above marked is the unwanted thing so how can i change my link in query designer???
please suggest me firneds -
Can't able to edit the query in query designner
Hello every one,
Please help me in below issue. It is really important.
Actually i have create the query in the BI- Development and that i pass to the production.
Now. I tried to again edit the same query in the development , and for that i have create a new request . after creating the requesting i again logged in to the BEx query designner , but still i can not able to edit the query..
i have create the request in the correct manner. So, what will i do now? Please help me in this.HI Gaurav,
Again i create a request by below steps
->open the ADW by RSA1
->go to Transport connection
->go to query element - > select my query -> select all necessary query element -> and then click on the truck symbol (i have not create BEx request)
and then i create the request
then i open the query in the designer and again i can not able to edit the query
error is same
-> BEx transport request is not available or not suitable
-> choose an existing request
Now,tell me what can i do? this is really an issue for me and help me to solve..Please all other can also give there comments
one more thing i want to add is , i have also check the object changabilty , there the query element and all related to query are "not changable". Is this an issue.
Edited by: james macwan on Oct 16, 2008 8:39 AM -
Hi,
I just want to know the difference between SAP Query & ABAP Query.
How to procede with these two methods,Which method is used for which purpsoe.
In which cases SAP Query is prfered or in which cases ABAP Query is prefered.
Thanks in Advance,
Irfan HussainHi Irfan,
This is what sap help says,
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly.
Regards,
Ravi -
Unable to create new query using query manager
Hi friends,
I have been trying to create a query using query manager for couple of hours but still not able to.I am following the instructions given in oracle Peopletools 8.52 : Peoplesoft query
Chapter - creating new queries.
Below are the steps I am going through to create new query:
Step - I open the component Reporting Tools-> Query->Query Manager , I don't get the tabbed pages one for search an existing query and another for create new query.
Please follow this link to see how the page is displayed in first step:
http://uploadpic.org/v.php?img=EvMvVAXX1E
Step 2 - When I click on create new query link, I am redirected to a page where it asks for record name to add in the query. But, even this page is not displayed as how it supposed to be
http://uploadpic.org/v.php?img=GzHh3f6krU
Step 3 - Following the above step, when I click on Person record to add into my query I am asked to select the fields that I want to display in the output.
But I somehow do not get the proper tabbed pages where individual pages are there to add the attributes to complete the query like adding multiple records, fields, query, expressions, prompt...etc
http://uploadpic.org/v.php?img=Wbbla3Q3jE
I am neither able to select multiple records in my query nor able to customize my query to get the desired results.
Below is the query that I want to create using query manager:
SELECT P.EMPLID,P.BIRTHDATE, N.NAME, A.ADDRESS1, A.ADDRESS2, A.CITY
FROM PS_PERSON P, PS_NAMES N, PS_ADDRESSES A
WHERE P.EMPLID = N.EMPLID AND
N.EMPLID = A.EMPLID AND
P.BIRTHDATE BETWEEN to_date('1990/1/1','yyyy/mm/dd') and to_date('1991/1/1','yyyy/mm/dd');Hi,
As I cannot access your screenshot by the blocking of company firewall rules.
I'm guessing currently you are using PT 8.52.00 version, correct?
This should be a bug, that you need to apply the 8.52.0X patch, not sure which patch fix this, you can apply the latest one to solve this issue for no tab page of query manager. (PT 8.52.06)
Hope this helps.
Thanks,
Saxon SI -
Using NVL in Query of Query resulting in error
I'm still using CF8 and Oracle 11G back-end.
When I use NVL in the query of query I got error....Can't I use NVL to check on null value? Please help
Here is my codes:
<cfquery name="GetC2" datasource="#Trim(application.OracDSN)#">
SELECT CamID2, rel2_2,p_ln2,p_fn2,ins,l_year
FROM prt_temp
WHERE Ins = 'CC'
AND l_year = '1481'
AND NVL(Child_LN2,' ') <> ' '
AND NVL(Child_FN2,' ') <> ' '
</cfquery>
<cfif GetC2.Recordcount NEQ 0>
<cfquery name="CheckRel2C2" dbtype="QUERY">
SELECT CamID2, rel2_2
FROM GetC2
WHERE NVL(Rel2_2,' ') <> ' '
AND NVL(p_ln2,' ') = ' '
AND NVL(p_fn2,' ') = ' '
AND Ins = 'CC'
AND l_year = '1481'
</cfquery>
</cfif>
The error:
Error Executing Database Query.
Query Of Queries syntax error.
Encountered "NVL ( Rel2_2 ,. Incorrect conditional expression, Expected one of [like|null|between|in|comparison] condition,NVL is an Oracle function, and is not available in ColdFusion Query of Query. If you are trying to check for null values, then use IS NULL or IS NOT NULL. So
WHERE NVL(Rel2_2,' ') <> ' '
AND NVL(p_ln2,' ') = ' '
AND NVL(p_fn2,' ') = ' '
becomes
WHERE Rel2_2 IS NOT NULL
AND p_ln2 IS NULL
AND p_fn2 IS NULL
-Carl V. -
I'm creating an image gallery. My database has about 1000
records with 10 column.
Now I'm realising there's a lot of trips to the database.
Would it be better that when I init my app I store the "get all"
query and query that from that point? Or is the difference in
performance of querying a query as a oppose to a database not worth
it?
If you say I should query the query, how many records would
be too much to hold in memory.
Thanksquote:
Originally posted by:
dandev
I'm creating an image gallery. My database has about 1000
records with 10 column.
Now I'm realising there's a lot of trips to the database.
Would it be better that when I init my app I store the "get all"
query and query that from that point? Or is the difference in
performance of querying a query as a oppose to a database not worth
it?
If you say I should query the query, how many records would
be too much to hold in memory.
Thanks
It would be better to just select the records you need. -
How to extract the Physical Query(database Query)
Hi ,
How to extract the Physical Query(database Query) from obiee which was fired in obiee
Regards
RangaHi Ranganath,
Have a look the following links.
Setting Logging level:
http://gerardnico.com/wiki/dat/obiee/loglevel
How to see physical query:
http://gerardnico.com/wiki/dat/obiee/manage_session_log
If you are new to OBIEE, spend some hours on the following blog to learn from basics to advanced level.
http://gerardnico.com/wiki/
http://obiee101.blogspot.com/
http://www.rittmanmead.com/blog/
Hope it helps you.
Regards,
Kalyan Chukkapalli
http://123obi.com
Maybe you are looking for
-
Would like to share music with someone. Currently the computer registered with the iPad is out of commission. But since you can pretty much do everything on the iPad another computer was not purchased. How can I utilize home sharing with out two c
-
I'm using the Keynote Widget in iBooks Author, and the Keynote presentation uses the Magic move transition between slides. When I preview the iBook on a new iPad, the Magic move transitions don't show up (i.e. the transition from slide to slide is s
-
I have scenario like this,Idoc to file.When ever an Idoc is generated at R/3.my interface should be generated from idoc to file.like polling .i.e., when ever a new idoc is created at R/3 system immediately that should be converted to file thru my mid
-
Need qucik help regarding date
Hi, I have table A which has column report_month its has values like 10/1/2012, 11/1/2012,12/1/2012 I try to do the following, apparently both are not working, I just want to retrieve 11/1/2012 select * from A ehere report_month like (11%) or select
-
"Scratch" Playback sound at the start of songs/when cycling through menus
Yesterday I decided to activate genius on my new laptop. Today, I noticed a "scratching" noise appear in the first few sconds of playback, and when cycling through the menus, (from music to itunes store, to ipod, etc.). After looking at some of the d