Restricting user to input a maximum number of characters in a JTable cloumn

Hi all,
I'me developing a program which should restrict the user with a maximum number of characters input in a JTable column. It should show a msg and restrict the user from typing in, if the number of characters exceed the limit and on clicking cancel it should revert back the changes made to the field.
Can anybody please help me?
Thanks in advance,
Amol

Hi,
Try to write your own cell editor.
There attach an InputVerifier to the JTextField of the editing cell.
The input verifier can watch for the size of the input and if too many characters you can show a JOptionPane.Dialog.
Olek

Similar Messages

This user is allowed a maximum number of 5 concurrent shells, which has been exceeded.

I have a C# component which executes Powershell scripts in powershell environment. Suddenly it started to show some issues, Now, when I try to execute the following, it shows exception
Enter-PSSession -ComputerName 192.21.10.71 -Credential abc\admin
The exception is given below...
Enter-PSSession : Connecting to remote server failed with the following error message :
The WS-Management service cannot process the request. **This user is allowed a maximum
number of 5 concurrent shells, which has been exceeded.** Close existing shells or raise
the quota for this user. For more information, see the about_Remote_Troubleshooting
Help topic.
At line:1 char:16
+ Enter-PSSession <<<< -ComputerName 192.21.10.71 -Credential abc\admin
+ CategoryInfo : InvalidArgument: (192.21.10.71:String) [Enter-PSSession],
PSRemotingTransportException
+ FullyQualifiedErrorId : CreateRemoteRunspaceFailed
I fear, this is because I haven't properly closed / disposed the runspaces created in c# component.
Here is the code extracted from my component
Collection<PSObject> objPS = new Collection<PSObject>();
PowerShell powershell = PowerShell.Create();
PSCredential credential = new PSCredential(strUserName, password);
objRunspace = RunspaceFactory.CreateRunspace();
objRunspace.Open();
objPS = powershell.Invoke();
finally
objRunspace.Dispose();
I am beating the bush, instead of finding the root cause of this issue.
Thanks...

Hi,
Even I am facing the same issue while trying to open session in my C# code.
I have created and using one System.Management.Automation.Runspaces.Runspace object. Which is created by calling Open() method.
At the end while exiting the program I am calling Dispose() method.
Initially when I wrote this client, I was able to run powershell commands without any issue. After some days of use I got this below exception.
Result Message: Assembly Initialization method
InitializeLyncTestSuite threw exception. System.Management.Automation.Remoting.PSRemotingTransportException: System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : The WS-Management
service cannot process the request. The maximum number of concurrent shells for this user has been exceeded. Close existing shells or raise the quota for this user. For more information, see the about_Remote_Troubleshooting Help topic.. Aborting test execution.
Result StackTrace:
at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
at System.Management.Automation.Runspaces.Internal.RemoteRunspacePoolInternal.Open()
at System.Management.Automation.Runspaces.RunspacePool.Open()
at System.Management.Automation.RemoteRunspace.Open()
After restarting all the Lync Server services I was able to avoid this exception. But after using this client couple of times now, I am facing the same issue again.
Does calling Dispose() method is not enough for closing a session from C# code? Or should I use something else to close session from C# client?

What is the maximum number of characters in an Oracle 10G Instance Name

All,
Can I know what is the maximum number of characters in an oracle 10g instance name under AIX? Is it 7 characters or 8 characters?
regards
Santhosh

One should really make the difference between db_name and instance_name: if instance_name default value is db_name it can be different
(even on a non RAC database).
For example with Oracle 10.2.0.4 you can create a database named DB78 with instance_name=DB12345678:
$ uname -a
Linux lx01.localdomain 2.6.18-92.el5 #1 SMP Fri May 23 22:17:30 EDT 2008 i686 i686 i386 GNU/Linux
$ ps -fu oracle | grep smon
oracle    6353     1 0 20:30 ?        00:00:01 ora_smon_DB12345678
oracle    6412 5596 0 20:37 pts/1    00:00:00 grep smon
$ export ORACLE_SID=DB12345678
$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 8 20:34:26 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> show parameter name
NAME                                 TYPE        VALUE
db_file_name_convert                 string
db_name                              string      DB78
db_unique_name                       string      DB78
global_names                         boolean     FALSE
instance_name                        string      DB12345678
lock_name_space                      string
log_file_name_convert                string
service_names                        string      DB78I would not recommend this practice: but it's interesting to know to avoid confusing between db_name and instance_name.

Maximum Number of Characters for Password??

Hello, and thank you for reading my post. I recently modified my Apple ID Password to a very strong password containing 32 characters. When I try to log into this discussions group with that particular Apple ID, I can't because the website won't accept the password? Wouldn't all of Apple's sites accept the same password?
Is there a maximum number of characters for a password in this discussion group?
Thanks

What makes you believe that 32 characters is remotely necessary? As Ralph indicates, a shorter password is equally secure, in realistic terms. Keep in mind that even if some hacker set up a script to repeatedly try random passwords on your account, they're never going to get in because there are limits on the number of times one can enter an incorrect password before being blocked on any decent system. You can have a much shorter password, and as long as a human can't guess it from what is publicly known about you, it's secure.

Maximum number of characters in displacement file

Is there a maximum number of characters that can be in the name of a saved displacement file? When I save a displacement file with 12 characters or less, the Filter>Distort>Displace works fine; when I save the same file with 13 characters, nothing happens when I try to apply the filter. Obviously, the solution is to save files with 12 or fewer characters. I just wondered if this is a known limitattion. Thanks.

Yes, the displacement files are in a "buried" folder, but they are in the same folder. One character did make a difference: displacement.psd worked, displacement1.psd didn't. I made a copy of displacement1.psd on the desktop and it did work so your idea that path length has importance is valid. Maybe it is the entire name of the file, path included, that is the determining factor. If so, it appears that the total number is somewhere around 122 characters. If there is a definitive answer to this question, please add it to this discussion. Otherwise, this question is answered. Another quirky Photoshop "Two-o'clock-in-the-morning-why-isn't-this-working" problem is resolved. Thanks!

COIO - Maximum number of characters that can be displayed

Does anybody know what the maximum number of characters is that can be displayed in COIO.

Transaction COISN does not exist
Message no. S#343
Unfrotunately I get the message that transactions doesn't exist.
I'm trying to add more fields that you can display on the screen, I need to try and know how many fields it can display from left to right
Thanks for trying to help

How can I have a program prompt a user to input a selected number of simultaneous (different devices run off com/rs232 ports) and be able to compile all the data and/or graph it simultaneously?

I have a project that I'm working on that I could use some help on.
Some background on it is I'm taking data from a balance via RS-232 (can be a selectable list of balances), and then communicating with them on their own separate COM port. I need these to then run in parallel to then take masses in regular increments and then output them to a graph and/or TDMS file.
What I'm trying to have is that a subVI prompts the user to how many simultaneous runs will be going.
Then I will want multiple pop prompts (one for each simultaneous run) which will have initial data input (data cluster) and then associate these with the COM port and the specified balance.
I initially thought of utilizing a For Loop this way but I can't get these windows to pop up multiple times while storing their own values in say a cluster array. Can anyone give me any ideas to get me a little further?

Cameron,
I've created a prompt for the user to select the number or runs to be run simultaneously.
This then should trigger the amount of prompts the user needs to input - ie VISA resource, and headers to label the "samples".
I want this to be done in multiples (somewhere around 1-10 simultaneous runs - bounded by the program) so that data points from multiple sources can be taken and graphed/saved to file. I just am having issues with the loop situation to be able to keep prompting the user X times and also output the data to the front panel. Originally i thought I could somehow manipulate a tab control container but I'm getting roadblocked.
Does that help you understand what I'm trying to do?
I've attached an image of what I want the user to input for each sampling.
Attachments:
Capture11.JPG ‏24 KB

Restrict users from input

Hi Experts,
Is there a way to restrict users from sending data through input schedules ?
My requirement is to lock the weeks as we go . for example if data has already been sent in week1 no one should be able to modify it through input schedules.
other weeks should be open for sending data. The weeks that have passed need this restriction.
Any ideas ?
Thanks

Hi,
You should first maintain the work status at the appset level. Please refer to the below link from help.sap:
http://help.sap.com/saphelp_bpc75/helpdata/en/f8/d51b881cfa4c5992de481ccfa05db3/content.htm
Hope this helps.

Maximum number of characters that can be parsed by javacc parser

I'm a newbie to Javacc.
Can any one please let me know if there is any limitations with respect to the number of characters that can be parsed by a Javacc parser?
I have done with a simple javacc parser. I'm getting some stackoverflow exception when the number of characters exceeeds more than 10000 characters.
Please help me in resolving this issue.
Thanks in advance

snr_anand wrote:
I have done with a simple javacc parser. I'm getting some stackoverflow exception when the number of characters exceeeds more than 10000 characters.
Presumably what is really happening is that you have a source file that is now 10,000 (or so in length.) You run your parser on that and it blows up.
That suggests that your syntax and the combination of the input, rather than javacc, has a problem. The source and the syntax together are producing a never ending recursion.

Maximum number of characters in a String?

Does anyone know if Strings are limited to a mximum number of characters? If so, what is the limit?
Thanks!
Flo

can you also tell me how Browser handle the memory aspect? AFAIK, they don't.
All I need is a maximum of 1MB for one temporary single String.1MB should be small enough to fit in the memory... where do you get that string?

6300 Contacts List Maximum Number of Characters on...

When dispaying the contacts list if a contact entry is more than 12 characters then in the end there's 3 dots, even if there's enough space on the display for more characters. Would that be fixed in new firmwares? The current version 4.71 isn't patched for diplaying the maximum available number of characters.

You have to contact Nokia and tell them about it, they might even fix that if you are lucky.
Nokia N95
V 20.0.015
0546553

Maximum number of characters for a BPEL string variable

Hi,
What is the maximum numbers of characters that a string variable in BPEL process can hold??.
Is there any document which describes the datatypes in BPEL.
Regards
V Kumar

Trick question - with or without the use of the FM GUI?
1. Via the FM interface to define a variable, FM will only save the first 1022 characters of your variable definition - if you dare try to enter that many via the GUI dialogue slot.
2. Importing a variable via MIF, adds virtually any length - I've tested out 2510 characters. HOWEVER, FM will only display the first 1023 characters of this string.
If you save the file to MIF, you can still see the original length of the variable. The other caveat is that if you touch any of these long variables via the FM GUI (Edit Variables), then FM will truncate it down to 1022 characters - regardless of how you save (binary or MIF).
FWIW - Klaus Daube lists (see: http://daube.ch/docu/fmaker25.html ):
Until FM 7.2: up to 255 characters including meta-notations (such as <Default ¶ Font> or \t - this counts as 16 resp. 2 characters). See also note Variables below
From FM 8.0: up to 2023 Windows Codepage characters or up to 2022 UTF-8 characters
I'd say that this is not quite correct. You could enter more than 255 prior to FM 7.2 as well, but again the display issue via the GUI kicked in and truncated down to 255. The newer versions only display 1022/1023 but you can enter more than 2510 characters (which in this case is futile anyway).

Maximum number of characters for Host name..

Is there a limit to the number of characters for the host name of adobe lifecycle?
Is 15 characters to much?

What makes you believe that 32 characters is remotely necessary? As Ralph indicates, a shorter password is equally secure, in realistic terms. Keep in mind that even if some hacker set up a script to repeatedly try random passwords on your account, they're never going to get in because there are limits on the number of times one can enter an incorrect password before being blocked on any decent system. You can have a much shorter password, and as long as a human can't guess it from what is publicly known about you, it's secure.

Restrict user to input 0 - 9 for string data

Hi
I would like to input this control at the front panel. This control allow user to choose from 0 - 9. Eg 0 1 2 3 4 5 6 7 8 9 .
The control do not allow user to put -1 -2 -3 ... or 10 11 ... or decimal place.
This number will be further converted into string as a name of a folder to be created.
Thank for viewing this thread and give your assistance
PX
Solved!
Go to Solution.

First, right click and select 'Representation and change to integer (i.e. U8), and then right click and select Data Entry. Uncheck the 'Use default limits' and enter the range you want.
If you noticed, everything is accomplished by right clicking. You should be familiar with all of the right click options. Have you done any of the tutorials?

How to restrict user's inputs to F4 help Values?

Hi Experts,
I have created a custom infotype where i have a custom search help created for one of the fields, the problem is that even if i give values other than the values in the search help the infotype doesnt throw any error and gets saved.
So can anybody explain how to restrict the field only to search help values.
Thanks,
Revanth.

Hai.
Check the example it may help you.
See the following ex:
TYPES: BEGIN OF TY_MBLNR,
MBLNR LIKE MKPF-MBLNR,
END OF TY_MBLNR.
DATA: IT_MBLNR TYPE STANDARD TABLE OF TY_MBLNR WITH HEADER LINE.
data: it_ret like ddshretval occurs 0 with header line.
At selection-screen on value-request for s_mat-low.
Select MBLNR from mkpf into table it_mblnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'MBLNR'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_MBLNR
FIELD_TAB =
RETURN_TAB = IT_RET
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
read table it_ret index 1.
move it_ret-fieldval to S_mat-low.
ENDIF.
Go through the test program.
REPORT Ztest_HELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
Regards.
Sowjanya.b.

Restricting user to input a maximum number of characters in a JTable cloumn

Similar Messages

Maybe you are looking for