How can I have a program prompt a user to input a selected number of simultaneous (different devices run off com/rs232 ports) and be able to compile all the data and/or graph it simultaneously?

I have a project that I'm working on that I could use some help on.
Some background on it is I'm taking data from a balance via RS-232 (can be a selectable list of balances), and then communicating with them on their own separate COM port. I need these to then run in parallel to then take masses in regular increments and then output them to a graph and/or TDMS file.
What I'm trying to have is that a subVI prompts the user to how many simultaneous runs will be going.
Then I will want multiple pop prompts (one for each simultaneous run) which will have initial data input (data cluster) and then associate these with the COM port and the specified balance.
I initially thought of utilizing a For Loop this way but I can't get these windows to pop up multiple times while storing their own values in say a cluster array. Can anyone give me any ideas to get me a little further?

Cameron,
I've created a prompt for the user to select the number or runs to be run simultaneously.
This then should trigger the amount of prompts the user needs to input - ie VISA resource, and headers to label the "samples".
I want this to be done in multiples (somewhere around 1-10 simultaneous runs - bounded by the program) so that data points from multiple sources can be taken and graphed/saved to file. I just am having issues with the loop situation to be able to keep prompting the user X times and also output the data to the front panel. Originally i thought I could somehow manipulate a tab control container but I'm getting roadblocked.
Does that help you understand what I'm trying to do?
I've attached an image of what I want the user to input for each sampling.
Attachments:
Capture11.JPG ‏24 KB

Similar Messages

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

Yes, windows to Mac too.
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

How can I have a checkbox that a user checks and populates a field with read only text, then if another checkbox is checked it will allow user text input

Hi
How can I have a check box that a user checks and populates a field with read only text, then if another check box is checked it will allow user text input into that same field, her is my javascript
var a ="Not Applicable"
if (this.getField("Do").value == "Yes")
a=""
if (this.getField("DoNot").value =="Yes")
a=a + ""
event.value=a
say if the "Do" cb is checked, Not Applicable would populate the text field, and if the "DoNot" cb is checked it would allow user input into the same text field, the javascript I have will not allow user input,
thanks for any help I am new to javascript

Are these fields mutually exclusive?

How can I have mutiple bookmarks toolbars? Not multiple row. Multiple toolbars. With different names.

I just want multiple bookmark toolbars.
Right click the ui, choose a toolbar (e.g. "Work", "Visuals") etc.
That's it.
Not multiple rows.
Thanks.

That is not possible.
Firefox only has one Bookmarks Toolbar item that can hold the bookmarks.
So you can only use an extension that supports multiple bookmarks rows to add an extra row if the current last one gets filled up.
The best workaround is probably to create bookmarks folders on the bookmarks toolbar and open those to access each category.
*https://support.mozilla.org/kb/Bookmark+folders

How can i change a program from Request/Task ?

Hi everybody
I have a main program in some request/task number and some include in other request/task numer; i want to transport them in the same task.
How can i change a program/include from one request/task to other ?
Thanks
Frank

The simplest way is to go TR.SE09 and go to your request "Delete the Object " and again go to your object and save it it `ll ask for request ..add it where ever you want .
Thanks
SK

How can I have popup text when user types something wrong?

I have some textarea and textfields created dynamically. I have set of rules in a text file. How can I have these rules popup when users make mistakes(e.g., forgets to capitalize the name)?
Please provide your input.
Thx.
M

Mike
From your addendum I'm guessing you are wanting to do this with a JSP or servlet. If so Ali's suggestion won't work becuase he's working with Swing components. It is always helpful if you specify the technology you're using: JDeveloper is a tool for writing many different types of Java programs.
If you want to produce pop-up windows in JSP then you have to use JavaScript.
If you're using DataWebBeans and want to use JavaScript you have to change (ie subclass) the WebBeans so that they have HTMLFieldRenderers that allow you to attach Javacript to a TextField (or whatever). This is not a small job but is worth it for the flexibility you'll gain.
If you're using datatags I should imagine it's easier because you can add JavaScript functionality directly to the HTML input fields e.g. in the Input page, but I imagine you'll still have to subclass your own datatags to do the same for the Update pages.
GoodLuck().youllNeedIt, APC
null

After a person submits a form, how can I have their screen return to my company's webpage?

After a person submits a form, how can I have their screen return to my company's webpage?

Setup a Redirect URL: http://forums.adobe.com/thread/869660

How can I have user specific filters for information display on portlet?

Hello Everyone !!!!!
I am new to the Portlet World
My query is..
How can I have filters on a portlet screen ?
I want to display certain information on a portlet which must be filtered and ordered.
Example:
In Internet Banking , I want to display transfers which had happened in the last month. So I ( as a user ) will keep this predefined somewhere may be in portletData.
Whenever that user logs in for the next time, he will be able to view account transfers taken place in the lastest month only.
This must be user specific. As another user can keep the setting in a different way. That is he/she might want to view account transfers for the last week only.
When user clicks on a button a new screen( filter screen ) is loaded where he need to enter the dates of From and To .....
The user saves this.....( may be in portletdata)
So that when he logs in .. next time screen loads with the defined settings in filter....
Any idea ? How can this be achieived ?
Thanks in advance.... :-)
Wating for a reply
Message was edited by:
dev2007

Hey !!!
Can anybody give me some idea regarding this ?

I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?

In 2012, I bought Photoshop CS6 Extended (education edition) for Mac. Now I want to install it on my new Macbook. I have the correct serial number and product code, but I receive an error message: the software may be a false copy etc....What to do?

Here is a copy of the error
This means : Installation failed.
Verification of the Adobe Software failed
The product you want to install is no valid Adobe product and seems to be falsified.
HUgo
Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Hugo please turn off your e-mail signature.
If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files. You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
To download a fresh copy of the installation files please see Download CS6 products.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I bought my iphone in February 2014, but I found that iphoto, pages an these programs are paid while it should be free. how can I have it as free apps?

I bought my iphone in February 2014, but I found that iphoto, pages an these programs are paid while it should be free. how can I have it as free apps?

See this link:
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
-- Léonie

I have a problem with adobe support advisor, how can i reinstall this program

i have a problem with adobe support advisor, how can i reinstall this program

hi wie kann ich adobe support advisor reinstalieren mac , ich bekomme fehlermeldung beim photoshop installation
Von meinem iPhone gesendet
Am 17.08.2014 um 07:17 schrieb Willi Adelberger <[email protected]>:
i have a problem with adobe support advisor, how can i reinstall this program
created by Willi Adelberger in Deutsche Foren - View the full discussion
Kannst Du mal anfangen Deine Frage zu stellen?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6647388#6647388
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Deutsche Foren by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How can we have two different Itunes libraries on one computer?

How can we have two Itunes accounts on one computer? I found info on the itunes help page but I do not know how to follow the steps given because I am not prompted with what it says I should be prompted with? Please help I don't want to delete one of our libraries

Launch iTunes with the Shift key held down as needed, or use different Windows XP user accounts.
(74282)

Can 2 different users with 2 different Iphones use the same itunes to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?

can 2 different users with 2 different Iphones use the same itune program to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?

Here is your answer:
http://support.apple.com/kb/HT1495

How can I copy file/folders from and to hard drives? How can I have two or more windows of explorer so that I can drag and drop from one hard drive to another?

Hi,
I am a new customer (purchased last week) of MacBookPro (latest) and its my first ever Apple laptop.
I am almost lost to find the operating tools.
1. How can I copy files from hard drive to computer and vis-a-versa?
2. Only can browse one but how can I have two or more browses at the same time like in MS windows?
3. No right click works on track pad?
4. Is there application/ program compatible to MS office? If so how much and how can I purchase?
5. Is there AutoCAD program that is compatible to MS Window AutoCAD? and if yes how much and how can I purchase?
I will very much appreciate if you could email me the with the solution/answers please.
Regards,
Khagendra Limbu

1) For some reason this happens once in a while with FAT32 enabled external harddrives. I have no idea why this happens but it most easily solved by reformatting the drive. First make sure you've copied everything from the external drive to your internal harddrive. You've done this earlier so I assume you know how to do this.
Now the reformatting part. Open Finder and go to Applications. Look for the folder called "Utilities". Click on it. In it you find a program called "Disk Utility". Click on it. Now look for the external drive. You probably see two entries for the disk. Click on the one that contains the name of the drive NOT the one that describes the disk (Like for example 320.07 GB Samsung S2 Portable Media).
Now you see four tabs in the righthand part of the window. They're called "First Aid", "Erase", "RAID" and "Restore". Click on "Erase". This opens the tab with (amongst others) a dropdownbox (Format) and a textbox (Name) . In the dropdownbox select "Mac OS Extended (Journaled). Take note! This selection disables usage of the drive with Windows PC's. If your goal is to share the drive with Windows PC's select the MS-DOS FAT option.
Enter a label for the drive in the textbox Name. Now click on the button "Erase". This will format the drive.
Now when it's done you can copy back all the items you've copied to your internal harddrive earlier.
2) Opening two windows like Explorer on Windows is opening two Finder windows on the Mac. Simply click on the background. In the menubar you items like 'Finder", "File", "Edit", "View", et cetera. Click on "File" and "New Finder Window". Do this two times. Alternatively you can click on the background and press CMD-N two times.
3) You can right click on the trackpad. This however depends on if you've enabled the feature in System Preferences. In the topmenubar click on the Apple icon and select "System Preferences". Now look for Trackpad in Hardware. Click on it. You see three tabs with the names "Point & Click", "Scroll & Zoom" and "More Gestures". Select "Point & Click" and look for "Secondary Click'. Make sure it is checked and make sure it has written "Click or tap with two fingers" written beneath "Secondary Click". When you're done exit System Preferences. Now select the background and tap with two fingers on the trackpad. This should open the contextuel menu with options like "New Folder", "Get Info" et cetera.

I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version. How can I have the header and footer included when I open a template?

I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version. How can I have the header and footer included when I open a template?

That is becuase Pages 5.1 has numerous unnounced surprises for the unwary user. Among the surprises:
- it strips out images from headers and footers without warning
- it strips out bookmarks without wanring (yes, all those bookamrks you laboriously put into a document: poof! Gone.)
- it strips out alternating left/right margins, without warning.
There are many more suprises, as you'll see from glancing through these discussions. They fall into two main categories: things that are present in version 4.3 but that are missing in 5.1, things like
-mail merge
-meaningful Applescript/Services support
-non-contiguous text selection
-ability to set defaul zoom
-ability to see comments while editing
-ability to print comments
-ability to read RTF files
-ability to drag in hyperlinked ted from a browser
These about about 90 other features are gone.
Then there are the bugs. Hyperlinks do not reliably export to a PDF file any longer. There have been multiple problems with printing report. Some fonts place stray characters in the headers. Many reports of the program crashing, courrupting files, etc.
Fortunately for you, the previous version of Pages is still on your system. Export any documents you may have created or edited with Pages 5.1 (another great surprise: files created with version 5.1 cannot be read by any previous version of Pages: not just 4.3 but even 5.01!). Then trash 5.1 and use 4.3 until (unless?) it is stable and has a reasonably robust feature set.

How can I have a program prompt a user to input a selected number of simultaneous (different devices run off com/rs232 ports) and be able to compile all the data and/or graph it simultaneously?

Similar Messages

Maybe you are looking for