Restriction of input help for BPS exit variables

Hello,
In BPS 3.0b, I created BPS variables with user exit in order to restrict the values in the input help of a characteristic (related to the value selected by user of another variable for example).
In IP, I know that BPS variables are not used anymore and we have to create BI variables. But I don't know how to restrict the values of an input help in BI. I tried with the user exit RSR00001 but I didn't manage.
may be is there a possibility to reuse BPS variables ?
Thank you for your Help.
Catherine Bellec.

Hi Catherine,
could you please show me a sample how to restrict the input help for a variable in the user-exit?
Thank you in advance.
Best regards,
Andreas

Similar Messages

HOW to Restrict the input Help for 0MATERIAL in the BPS Layout

Hi,
I have requirement to Restrict the input Help for 0MATERIAL in the BPS Layout.
For Example if the Planning Package is Restricted to SALES ORGANISATION ( 3000 ) then the system shuold check the 0MAT_SALES where SALES ORGANISATION IS "3000" )AND PASS THE Material Numbers to the 0material list.
I have Copied the standard Funtcion group "UPF_VARIABLE_USER_EXIT" to Z fucttion and have attached to Z Variabe as User Exit .
this Variable is Attached to 0material in the Planning Pakage. So tha now the 0MATERIAL is restricted to the variable which is having the User Exit.
But how to acces the Values of Planning Package for which the Layout is bein Executed from this Z User Exit ???
I Know how to restrict the input help, but my only problem is that how to get the values of Planning package through this User Exit.
Please suggest if it is possible.
Regards,
Nilesh Labde

Hi Nilesh,
As I understand from your question,you know how to restrict but the issue is to know the value in the package with which you need to restrict.
There are two tables which can help you finding the value used in package for sales organisation:
1. UPC_PACKAGE
2. UPC_OPTIOS
How to use ?
From UPC Package you will get one GUID, Hit the second table UPC_OPTIOS with this GUID.
In field "FIELDNAME" enter the name of the characteristic whose value is req (sales organisation in your case)
Hope this helps you
Mann

ABAP code Help for Customer Exit variable

Hello All,
Can anyone provide ABAP code for a customer exit variable please?
Requirement:
0CALYEAR(InfoObject) - ZCALCYR (Variable) Calender year with default value actual year.
Proiperties of variable: single value,mandatory,ready for input,can'be changed in query navigation.
i have read some docs on customet exit variables which i got from SDN but i found it's difficult for me to get this as i am not that good in ABAP.
Thanks,
Rakesh.

Hi,
 Just check the below code. You just need to make slight changes I believe. Hope this helps you.
In CMOD..
Sample code
INCLUDE LXRSRF01 *
data: l_s_range type rsr_s_rangesid.
case i_vnam.
when 'ZCALCYR'.
 if i_step = 1.
 l_s_range-low = sy-datum+0(4).
 append l_s_range to e_t_range.
 Endif.
Endcase.

Restriction of f4 help of a bex variable based on another variable input

Hi,
Could you please let me know if there is any possibility to restriction of f4 help of a bex variable based on another variable input.
eg: when i select particular company code in one variable, i need to restrict the f4 help for another variables eg: pur. group based on selected company code.
Regards
Kasi

Hi,
Try using replacement path option in bex with replace variable with variable selction.
Thanks.

Timeout on input help for variable

hi all,
in a selection screen of a report i have material and material type(navigational attribute of material) as input.
the report is built on cube.
only material is coming in cube.
when i click on input help for material type the screen hangs on the report times out.
whereas on the other hand if i am clicking help for material i am getting the values.
this variable is used in other queries on different infoprovider and is running fine there.
How do i get the values for input help for material type.
all the standard settings have been maintained(such as query filter selection etc...)
regards,
Arvind.

Hi,
Activate 0material masterdata.and Regenerate your query in RSRT.
If the problem still exists then debug the query using RSRT for the perticular field output.
Thanks
Kumar

Where do I write the code for customer exit variable?

Hi Gurus,
Can anyone tell me where and the procedure that I have to follow to get to the include ZXRSRU01 where I can write customer exit variable code.
I know its written in ZXRSRU01, but in my system it seems like its not active or does not exist. How do I get to start working in this include for customer exit variables?
Any help is appreciated. Thank you.
Regards
Reddy

hi Reddy,
variable exit use enhancement RSR00001 not RSAP0001. EXIT_SAPLRRS0_001.
try to follow some steps in 'how to' doc related to this, and sample code may useful for you
https://websmp206.sap-ag.de/~sapdownload/011000358700002762582003E/HowToDeriveVariableValue.pdf
https://websmp206.sap-ag.de/~sapdownload/011000358700002765042003E/HowToVerifyVariableInput.pdf
INCLUDE ZXRSRU01                                                   *
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
CASE I_VNAM.
WHEN 'CUMMONTH'.
    IF I_STEP = 2.                                  "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = 'MONTH'.
        CLEAR L_S_RANGE.
        L_S_RANGE-LOW      = LOC_VAR_RANGE-LOW(4)."low value, e.g.200001
        L_S_RANGE-LOW+4(2) = '01'.
        L_S_RANGE-HIGH     = LOC_VAR_RANGE-LOW.   "high value = input
        L_S_RANGE-SIGN     = 'I'.
        L_S_RANGE-OPT      = 'BT'.
        APPEND L_S_RANGE TO E_T_RANGE.
        EXIT.
      ENDLOOP.
    ENDIF.
ENDCASE.
hope this helps.

Error in the ABAP Code for Customer Exit Variable

Could you please update me what is the wrong with the below ABAP Code developed for Customer Exit Variable in BW
i created a Variable (ZVWKNO) of Customer Exit,Single Value ,Mandatory and Variable is ready for input
In CMOD i had written the below Code:
When 'ZVWKNO'.
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
But when i execute the query the default value is not populated with Week-1 No in the variable screen
Please update me what went wrong
Thanks

Case ZVWKNO.                "write this with out comments
When '1'.              "write the value that needs to equal with value in varaible ZVWKNO after when in sungle quotes
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.                                    "check this Week Minimum is '01' and Maximum '52'
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
Prabhudas

Value for user-exit variable is invalid

Hi Gurus,
My Value for a Fiscal Year Prd returns a invalid value for the 12th month of each year( for Example 12/2004, returns the error "Value 200313 for User-exit variable is invalid.
This is the code that is being used.
*Rolling 12 months for entered month
when 'ZCALM12'.
 clear: v_mth, v_yr.
 REFRESH E_T_RANGE.
 CLEAR L_S_RANGE.
 LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
 WHERE VNAM = 'ZCALMON'.
 exit.
 endloop.
 v_yr = LOC_VAR_RANGE-LOW+0(4) - 1.
 v_mth = LOC_VAR_RANGE-LOW+4(2) + 1.
 L_S_RANGE-SIGN = 'I'.
 L_S_RANGE-OPT = 'BT'.
 concatenate v_yr v_mth into L_S_RANGE-LOW.
 L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
 APPEND L_S_RANGE TO E_T_RANGE.
Thanks in Advance.

Hi Ravi,
when 'ZCALM12'.
clear: v_mth, v_yr.
REFRESH E_T_RANGE.
CLEAR L_S_RANGE.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZCALMON'.
exit.
endloop.
-->> Here, you are not checking any thing. On which logic you are reducing year by one and increasing month by 1..?
v_yr = LOC_VAR_RANGE-LOW+0(4) - 1.
v_mth = LOC_VAR_RANGE-LOW+4(2) + 1.
-->>IF month is 200512 you will get output from above code is : please check.
v_yr = 2005 - 1 = 2004
v_mth = 12 +1 = 13.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
concatenate v_yr v_mth into L_S_RANGE-LOW.
L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
APPEND L_S_RANGE TO E_T_RANGE.
Try to debug the code by keeping break point after When. and execute the report, you will be debugging mode.
Hope it Helps
Srini

Selection-screen: Input help for VTWEG

Hello!
Can anybody help me with the following problem:
I have two select-options (VKORG and VTWEG) on my selection screen. Now there should be the possibility to restrict the values shown as input help for VTWEG after having selected a value for VKORG.
I've already tried to do this by using a matchcode object but for VKORG and VTWEG I was not able to find suitable search helps.
In my opinion this should be possible without using the "AT SELECTION-SCREEN ON VALUE-REQUEST FOR ...". If not, it would be interesting to getting to know your approaches to this task.
Thank you in advance!

you can refer to the following code
and you can write the code in the same way as per your requirement
*& Report ZRKTEST5 *
REPORT ZRKTEST5 .
DATA: PROGNAME TYPE SY-REPID,
 DYNNUM TYPE SY-DYNNR,
 DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
 FIELD_VALUE LIKE LINE OF DYNPRO_VALUES.
DATA: BEGIN OF T_T001L OCCURS 0,
 WERKS TYPE WERKS_D,
 LGORT TYPE LGORT_D,
 END OF T_T001L.
DATA: V_WERKS TYPE WERKS_D,
 V_LGORT TYPE LGORT_D.
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: P_PLANT LIKE MSEG-WERKS,
 P_STOLOC LIKE MSEG-LGORT.
SELECTION-SCREEN END OF BLOCK B1.
INITIALIZATION.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_STOLOC.
CLEAR: FIELD_VALUE, DYNPRO_VALUES. REFRESH DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'P_PLANT'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = PROGNAME
 DYNUMB = DYNNUM
 TRANSLATE_TO_UPPER = 'X'
 TABLES
 DYNPFIELDS = DYNPRO_VALUES.
READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
SELECT WERKS LGORT INTO TABLE T_T001L FROM T001L WHERE WERKS = FIELD_Value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'P_STOLOC'
 DYNPPROG = PROGNAME
 DYNPNR = DYNNUM
 DYNPROFIELD = 'P_STOLOC'
 VALUE_ORG = 'S'
 TABLES
 VALUE_TAB = T_T001L.
START-OF-SELECTION.
WRITE:/ 'TEST F4 PROGRAM'.
END-OF-SELECTION.

reward points if helpfull
Regards
Vikure

Static input help for DATS type

Hello,
I'd like to link static input help for screen field of DATS type. If I click on help linked to this screen field I get CONVT_NO_NUMBER error: 'Unable to interpret "=2" as a number.'
My steps:
- In Screen Painter I selected desired screen field and selected DATS type and "1 Show at selection" in its details.
- I defined global variable with same name as desired screen field
What's the problem?
Best regards,
Josef Motl

Hi,
do this way.....
first declare the variable in program as
1. data: date type sy-datum.
2. now go to your screen,(click on F6) use get from Program
now choose date form it , and say ok, now save it and activate it.
delete the old one..
now you will be able to get all the things which you want.
automatical validation also possible, and F4 also possible.
Regards
vijay

Input help for a selection screen field

I have a selection screen with field species and checkoff activity .
For a given species('sc','sb' or 'ss') , the input values allowed for the
check off activity must be 'SCCK' for species 'SC' ,'SBCK' for species 'SB' and so on.
I need to provide input help for check off activity based on the value of the species.How do i do that?

PARAMETER : p_val(10) TYPE c ,
p_val2(10) TYPE c.
AT SELECTION-SCREEN on p_val.
IF p_val = 'SC'.
p_val2 = 'SCCK'.
ENDIF.

Need help for user exit mereq001

Hi,
I need help for user exit mereq001. I think I messed up with include table CI_EBANDB and CI_EBANMEM. And When I tried to check the syntax . It gives me error like : Class IF_PURCHASE_REQUISITION. Inconsistency in the dictionary for the structure mereq_item_s_cust_data. Anyone had experience for this exit? I just need to extract costcenter information of the each item from the requisition and block the requisiton if the costcenter are differents from each other before the requisition is saved. Any one has idea about it?
Thanks.

biao,
Have you checked this struture consistency from SE11. Also check the activation log.
If there are any errors and you are not able to rectify the same use RSDDCHECK program, give your table name and run the report.
This will list down the error structures releated this table and also prompts for you to activate it.
Regds
Manohar

Input help for cost center & WBS element not working

Hi ALL
We are using SRM 4.0 with backend ECC 5.0.
Input help for attributes cost center (CNT), WBS element (PRO) are not functioning.
When tried to search for input help (F4) on the above attributes, I am getting message "Display not possible (Inconsistency in the input help)".
I even applied SAP note 746788 for cost center search help.
Can you tell me if I have missed any config settings?
Thanks in advance
Jagdish

Hi,
Did you managed the transactional RFC destination in the customizing (where you define all your log. systems it is an additional field in the table control).
Regards.
Vadim

How to provide input help for a variant

Hi,
I have a parameter on the selection screen.
P_layout like disvariant-variant value check.
How do I provide input help for this parameter and also how do i check wheather the input entered is correct or not.

Hi,
You can create a serch help for the field and add it in program like:
P_layout like disvariant-variant match-code object 'Searche help name'.
then if you need to do any validation u can do it at selection screen:
like:
at selection-screen for P_layout.
if..conditions..
regards,

Hi ,i want provide a input help for a Selection input field

Hi Experts,
I want to provide a input help for field in selection-screen ,
this field is non primary key Custom Table(Z) selection input field .
how we can get ,f4 help for this field.
how to get f4 help Suppose field Link s_mtart-low,s_mtart-high,
What are the function moduled available for this >
Thanks in Advance.
Regards,
Hitu.

Hi,
refer to below code.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_usnam-low.
**//To provide F4 help to S_USNAM-LOW
PERFORM f_f4help_usnam USING 'S_USNAM-LOW'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_usnam-high.
**//To provide F4 help to S_USNAM-HIGH
PERFORM f_f4help_usnam USING 'S_USNAM-HIGH'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_wbs-low.
**//To provide F4 help to S_WBS-LOW
PERFORM f_f4help_wbs USING 'S_WBS-LOW'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_wbs-high.
**//To provide F4 help to S_WBS-HIGH
PERFORM f_f4help_wbs USING 'S_WBS-HIGH'.
*&      Form f_f4help_usnam
    To provide F4 help to username
     -->P_0019   text
*FORM f_f4help_usnam USING    value(p_0019) TYPE any.
**// To retrieve username from mkpf.
SELECT bname
        FROM usr01
        INTO TABLE it_usnam.
SORT: it_usnam BY usnam.
DELETE ADJACENT DUPLICATES FROM it_usnam COMPARING usnam.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      retfield            = c_retusnam
PVALKEY                = ' '
    dynpprog              = c_dynpprog
    dynpnr                = c_dynpnr
     dynprofield          = p_0019
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
     value_org            = c_s
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
    TABLES
      value_tab           = it_usnam
    field_tab            = it_usnam.
return_tab             = l_it_ret
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*ENDFORM.                    " f_f4help_usnam
*&      Form f_f4help_wbs
    To create F4 help for wbs element
     -->P_0039   text
*FORM f_f4help_wbs USING    value(p_0039) TYPE any.
**// To retrive wbs element from mseg
SELECT pspel
        FROM pspl
        INTO TABLE it_wbs.
SORT:it_wbs   BY wbs.
DELETE ADJACENT DUPLICATES FROM it_wbs COMPARING wbs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
   EXPORTING
DDIC_STRUCTURE         = ' '
     retfield               = c_retwbs
PVALKEY                = ' '
   dynpprog               = c_dynpprog
   dynpnr                 = c_dynpnr
    dynprofield            = p_0039
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
    value_org              = c_s
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
   TABLES
     value_tab              = it_wbs
FIELD_TAB              =
return_tab             = l_it_ret1
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*ENDFORM.                    " f_f4help_wbs

Restriction of input help for BPS exit variables

Similar Messages

Maybe you are looking for