Result text is displaying in German as "Ergebnis"

Hi All,
In my BW reports, the "result" text is displaying as "Ergebnis". (German Language of result). Is there any settings need to maintain in the query designer.
Thanks.

Hi,
info object mean, info object text data.
Bur above issue is related to language.
As of now opened analyzer close it
Can you try to log into bex designer, use EN as language and log in.
Lets check whether it shows text in EN or not.
Open bex analyzer and log in , use language as EN and see.
Thanks

Similar Messages

How to simply display resulting text in a dialog Box

Is there a way to simply display resulting text in a dialog Box - not a text edit document?
Doug_

Thanks that's very helpful
What I am trying to to is to create a workflow that opens mail and displays iCal TO DO's that I have created throughout the day tagged with the word MAIL so they can be filtered.
At the moment the ACTIONS are:
Launch Mail
Get New Mail
Find TO DOs in iCal (Who's SUMMERY includes MAIL)
I get iCal To Do's as a result
But then...I can find no options to display the iCal Events that result.
Putting in the Applescript you posted displays a blank dialog box. This tells me that there is no text in the result.
Yet if I put a SPEAK TEXT in after find TO DOs it dutifully speaks my filtered TO DO's
I thought I might just try a NEW MAIL MESSAGE action.
This works great in the workflow. The content of the new mail is the filtered TO DOs.
But if I save it as an application (the form I need it in), mail simply opens blank when it reached that part of the work flow.
What would you recommend?
Thank again for your help,
Doug_
Message was edited by: Douglas Suiter
Message was edited by: Douglas Suiter
Message was edited by: Douglas Suiter

Results page only displays partial record

Hello everyone: I am new to this forum and would like to
request some help. I have searched and searched but cannot find the
answer to my problem on this forum or others.
I problem is as follows;
I have a results page which displays the complete version a a
single news story. I am pulling the story with a simple URL
Parameter. The PHP tage for the affected field contains a simple
nl2br statment and I am not using any complicated queries to pull
the data.
When I update the record from the update page I get no errors
of any kind, but when I load the page that displays the updated
record, the contents of the field in question is trucated.
I cannot see any problems with any of the code and I am quite
baffled by it.
Here is the code for the record display
<?php echo nl2br ($row_rsNews['story']); ?>
And this is the code for the update action
<?php
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "", $theNotDefinedValue = "")
$theValue = (!get_magic_quotes_gpc()) ?
addslashes($theValue) : $theValue;
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" .
htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_update"])) &&
($_POST["MM_update"] == "updatenews")) {
$updateSQL = sprintf("UPDATE news SET `date`=%s,
subtitle=%s, title=%s, story=%s, image=%s, thumb=%s WHERE id=%s",
GetSQLValueString($_POST['date'], "date"),
GetSQLValueString($_POST['subtitle'], "text"),
GetSQLValueString($_POST['headline'], "text"),
GetSQLValueString($_POST['story'], "text"),
GetSQLValueString($_POST['image'], "text"),
GetSQLValueString($_POST['thumb'], "text"),
GetSQLValueString($_POST['id'], "int"));
mysql_select_db($database_ifbdb, $ifbdb);
$Result1 = mysql_query($updateSQL, $ifbdb) or
die(mysql_error());
$updateGoTo = "news_list.php";
if (isset($_SERVER['QUERY_STRING'])) {
$updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
$updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
$colname_rsNews = "-1";
if (isset($_GET['id'])) {
$colname_rsNews = (get_magic_quotes_gpc()) ? $_GET['id'] :
addslashes($_GET['id']);
mysql_select_db($database_ifbdb, $ifbdb);
$query_rsNews = sprintf("SELECT * FROM news WHERE id = %s",
$colname_rsNews);
$rsNews = mysql_query($query_rsNews, $ifbdb) or
die(mysql_error());
$row_rsNews = mysql_fetch_assoc($rsNews);
$totalRows_rsNews = mysql_num_rows($rsNews);
?>
I would truly appreciate any help this group can
offer.

Hi Gunther:
I am really quite embarrassed, about this but I think I found
the problem...
I had a look at the table configuration in MySQL
Administrator, and there was the problem staring me right in the
face.....
The field 'story' was set to VARCHAR(255) ! I reset it to
TEXT and all is fine now!
Please accept my sincerest thanks for your help. Your
suggestion to check if I was using a textarea is what led me to
check the datatye again. I have no idea how it got changed but I
now know where to check first if it happens again.
Thaks a ton!!!!!

Vendor Evaluation - SAP Standard questionnaire always displays in German

Hi,
All settings to pop up the event driven questionnaire are in place for event Confirmation. System is SRM 7 EHP2.
I can confirm in the survey cockpit BBP_EVAL_SURVEY that:
1) Questionnaire SRM_CONF1E is for English
2) Questionnaire SRM_CONF_1 is for German
Despite of creating a new survey ID and assigning SRM_CONF1E, the popup always displays the questionnaire in German.
OSS Note 1568126 did not resolve anything.
Any help would be much appreciated.
- Sai.
SRM_CONF1E -- English -- Confirmed
Configured event to bring up this questionnaire during evaluation
Result during confirmation - wrong language - German instead of English
Custom questionnaire correctly displayed in English

HI Sai,
Could you please advise if you have changed the language based on the note which you mentioned. Manual correction require language change.
Please do the necessary change and test it again.
Thank you
Ritesh

User displayed in german need to be changed to enlish...help

Hi All,
i craeted a role and assigned a user to that role.when the user logged in the transaction menu list is displayed in german language which need to be chabged to english.i checked the language set to the user in su01(it is set english only)
rgds,
Anand

Hello Anand,
In the role you have created go to Menu tab and check if all the transactions displayed there are in German language if they are in german then in the change mode you can change the language to english using translate node button (in additional activities). Now check the user menu to whom this role is assigned, it should work. Anyway this helps if you have small list of transactions in menu. (Try se63 for translation of texts)
Award points accordingly,
Regards,
Raju.

Outlook.mailitem - diferent replace result when not displayed

Hello everybody!
I am developing an app to generate personalized emails from Excel file and .msg template.
In the template, I insert "variables" like this: ^name^,
which means that is is a placeholder for values from "name" column in source
Excel file.
this template is saved as .msg file on local disc and used as an argument in.CreateItemFromTemplate()
after loading the template , it cycles from all the columns and rows of the Excel file and replaces the inserted
variables:
loading excel:
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Dim fpath As String
OpenFileDialog1.ShowDialog()
fpath = OpenFileDialog1.FileName
workbook = APP.Workbooks.Open(fpath)
worksheet = APP.ActiveSheet
Dim CellData As String
Dim LastCol As Long
Dim LastRow As Long
Dim bunka As String
LastCol = workbook.ActiveSheet.UsedRange.Columns.Count
LastRow = workbook.ActiveSheet.UsedRange.Rows.Count
objData = worksheet
DataGridView1.ColumnCount = 1
DataGridView1.Columns(0).Name = "Column"
DataGridView1.Columns(0).Width = 130
For i = 1 To LastCol
bunka = worksheet.Cells(1, i).Value
Combo_To.Items.Add(bunka)
Combo_SaveName.Items.Add(bunka)
Dim row As String() = New String() {bunka}
DataGridView1.Rows.Add(row)
Next
Dim btn As New DataGridViewButtonColumn()
DataGridView1.Columns.Add(btn)
btn.HeaderText = "Use"
btn.Text = "+"
btn.Name = "btn"
btn.Width = 50
btn.UseColumnTextForButtonValue = True
btn.CellTemplate.Style.BackColor = System.Drawing.Color.Green
Combo_To.SelectedIndex = 1
End Sub
after that the DataGridView1 loosk like this:
the "+" buttons are used to insert text variables into the mail body.
code for inserting is, this works fine:
Private Sub grdData_CellContentClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView1.CellContentClick
Dim colName As String = DataGridView1.Columns(e.ColumnIndex).Name
If e.RowIndex < 0 Then Exit Sub
If colName = "btn" Then
Dim variable As String
variable = "^" & DataGridView1.Item(0, e.RowIndex).Value & "^"
My.Computer.Clipboard.SetText(variable)
objOutlookMsgY.GetInspector().Activate()
SendKeys.Send("^v") 'Paste
End If
End Sub
code for generating email from template:
Private Sub Button4_Click(sender As Object, e As EventArgs) Handles Button4.Click
Dim sessionName As String
Dim docas As Object
Dim variable As String
Dim dosazeno As String
Dim SavePath As String
Dim objOutlookMsgTEMP As Outlook.MailItem
worksheet = APP.ActiveSheet
objOutlookMsgY.SaveAs("C:\temp_msg2.msg")
clip = objOutlookMsgY.HTMLBody
MsgBox("clip saved")
sessionName = InputBox("Name this session:", "New Session", Today & "_")
SavePath = RootFolder & "\" & sessionName & "\_Initial session"
My.Computer.FileSystem.CreateDirectory(SavePath)
For radek = 2 To workbook.ActiveSheet.UsedRange.Rows.Count
ToolStripProgressBar1.Maximum = workbook.ActiveSheet.UsedRange.Rows.Count - 1
objOutlookMsgTEMP = objOutlook.CreateItemFromTemplate("C:\temp_msg2.msg")
' objOutlookMsgTEMP.Display()
For i = 1 To DataGridView1.RowCount
variable = Convert.ToString("^" & worksheet.Cells(1, i).value & "^")
dosazeno = Convert.ToString(worksheet.Cells(radek, i).value)
'wait(50)
Debug.Print("*" & variable & "*" & " >>> " & "*" & dosazeno & "*")
objOutlookMsgTEMP.HTMLBody = objOutlookMsgTEMP.HTMLBody.Replace(variable, dosazeno)
objOutlookMsgTEMP.HTMLBody = Replace(objOutlookMsgTEMP.HTMLBody, variable, dosazeno)
'wait(50)
objOutlookMsgTEMP.To = worksheet.Cells(radek, ToCol + 1).value
Next
objOutlookMsgTEMP.SendUsingAccount = accounts(Combo_From.SelectedIndex + 1)
Dim objDoc As Microsoft.Office.Interop.Word.Document
Dim objBkm As Microsoft.Office.Interop.Word.Bookmark
'On Error Resume Next
objDoc = objOutlookMsgTEMP.GetInspector.WordEditor
objBkm = objDoc.Bookmarks("_MailAutoSig")
If Not objBkm Is Nothing Then
objBkm.Select()
objDoc.Windows(1).Selection.Delete()
End If
objDoc = Nothing
objBkm = Nothing
objOutlookMsgTEMP.SaveAs(SavePath & "\" & worksheet.Cells(radek, Combo_SaveName.SelectedIndex + 1).value & ".msg")
' objOutlookMsgTEMP.Send()
ToolStripProgressBar1.Value = radek - 1
objOutlookMsgTEMP.Close(SaveMode:=Outlook.OlInspectorClose.olDiscard)
Next
End Sub
for replacing is used this:
.....objOutlookMsgTEMP.Display()
objOutlookMsgTEMP.HTMLBody = objOutlookMsgTEMP.HTMLBody.Replace(variable, valueFromExcel).....
or
.....objOutlookMsgTEMP.HTMLBody = Replace(objOutlookMsgTEMP.HTMLBody, variable, valueFromExcel).....
after replacing, the new message is saved as .msg or send
the problem:
everything works fine when the message is displayed while replacing. But when not displayed, only SOME variables
are replaced. I don't really understand why there is such difference in the result and why only SOME are
not replaced. I have tried changing the columns's names but found no connection between it and the result. when the message is displayed it takes like 10 times longer and makes the PC unusable.
real example:
the tamplate:
^jmeno^
^email^
^prij^
^jmeno3^
^sec code^
result, message displayed:
Jakub
[email protected]
Dxxx
16
266548
result, message not displayed:
^jmeno^
[email protected]
^prij^
4
449447
I have also tried adding some Wait functions, didn't help. I would really appreciate if you could help me
figure this out and explain why this happens. Thank you

Please also copy the below two vars from the debugger window and paste here as it is.
Debug.Print("*" & variable & "*" & " >>> " & "*" & dosazeno & "*")
Also send us you message template, you can send only the section where the two non working vars exist.
Fouad Roumieh

OTR : unable to display in German

Hi All,
I have created an OTR text in BSP application .
These are the steps that I have followed:
1) created OTR text and maintained the translation in Tcode SOTR_EDIT
2)used it in the program as follows :
<%= otr(zdfps_google/checkbox_title1) %>
I am still not able to display the text in German.
As mentioned in many other threads and blogs I have not used the method cl_bsp_get_text_by_alias=>get_text
for getting the translated texts. is this necessary? if so, I have many texts to be translated, so will i have to use this method for each and every OTR text?
I have also refreshed the OTR buffer and executed SOTR_DEFAULT_CONTEXT_FLAG_SET for reseting the Context flag. But it doesnt help
Your input will be greatly appreciated.
Thanks,
Vasuki

>
Vasuki S Patki wrote:
> If I chnage the language of browser to German, the texts are translated to German even though I login with English as logon language,.>
Yes its true. because it takes the browser settings as default.
U mean to say that, u have changed the sy-langu to DE in debugging mode?
Normally, in our BSP appln, we provide a button to change the language in browser for user to change the language settings.
At this time, if you select DE-German then all translations will be visible.
But as you said, all the texts are displyed in german! is that means, even your translation is also visible in german?
thanks,
Padma

Text not displayed in the Web Report

Hi All,
I have a query where user is expecting both Key and Text to displayed in the report for the Info object "Local Product High". This infoobject has text data available. But Iam not sure why this is not getting displayed even when I select both Key and Text in the properties screen.Only Key is getting displayed.
Can some one throw some light on this.
Regards,
Srinivas

I juct checked the Text table and I see the texts for the infoobject exists. I do not think CHange run will resolve this issue. but yes the master data is active .
I will now try to run the report through Bex and come back.
Thanks for the input..
regards,
Srinivas

Text Message display on Curve 9360

Hi...just got a new Curve 9360. The default text message display shows all messages i.e. if I've sent a text most recently that is what I see at the top. What I want it to do is show the SMS Inbox (which I can navigate to via the folder options, but I can't find a way to set it as a default). Can't work out how to do it either on the device or when connected to the PC. Any suggestions...?...R

Do you mean that currently ALL of your email messages and SMS text messages are mixed in one folder when you view, and you want to see a folder on your homescreen of ONLY your SMS text messages? And your email messages in another folder?
If so, on your device, open that Messages folder > press the Menu key > Options > Inbox Management and check the box on "Text Messages", and save. That will put an SMS Text message folder on your screen.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

0 down vote favorite share [fb] share [tw] How to hide cut/copy/paste/Replace- menu on the UIWebView when it is being displayed over the keyboard. Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text b

How to hide cut/copy/paste/Replace… menu on the UIWebView when it is being displayed over the keyboard.
Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text box it shows the keyboard. Now If user tap and hold on text box it shows a popup menu. Now while keyboard and pop up are being displayed user scrolls the view. At this time it shows pop up over the keyboard which I need to hide.
I tried setMenuVisible of UIMenuController when popup rect and keyboard rect intersects each other on viewDidScroll but it didn't help me.
Any clues will help a lot.
Thanks.

You are more likely to get an answer if you post programming problems to the Developer forum. This forum is intended for normal user level problems.

When saving a PDF not all text is displayed

We have a user here whom uses Adobe Acrobat X Pro. When she opens the PDF in question, all text is displayed fine, however, if she makes a small change and re-saves the document then a lot of the text is not displayed - This will also happen if she attempts to insert pages from the Source PDF into the destination PDF.
I have tried to repair the adobe install via the Help menu and have also given the application a full reinstall with no luck.
Here is how the text is displayed when just opening the PDF;
Here is where things go wrong, when she tries to Re-save this PDF the text is displayed as follows (again, the text will go like this if she tries to insert pages);
Any insight/assistance appreciated
Thanks!

Hi miraxes,
Please email me ([email protected]) the pdf file so that I can check at my end.
Regards,
Rave

Mail doesn't display full email text, only displays the subject line

Mail doesn't display full email text, only displays the subject line.
My preview shows first three lines of email, but when I chose the email specifically mail doesn't display any lines of text. Been this way for about ten days. Please help. Ben

Awesome. Rebooting the phone worked. I had never turned the phone off before (for the next guy - you hold down the "sleep" button for longer than you'd think and that'll do a full shutdown). thank you for your help.

Flash Text not displaying certain fonts

Thanks as always…
I am trying to use Flash text for some headings, but after an
hour of pulling my hair out I've just realised it will only display
certain fonts, such as Helvetica etc.
I added the font I want to use to my font list but it still
does not display…
I'm using MX on OSX 10.3.9.
Any ideas? Thansk.
Flash Text not displaying certain fonts

Fodderstompf wrote:
> Thanks guys,
>
> I don't have Flash MX and it turns out the font is a
Postscript Type 1.
>
> Didn't realise about the true-type thing, bit of
nusiance (and completely the
> opposite of the hassle I normally have with print
work!).
>
> I'm gonna look and see I can get a true-type version of
the font (Tabitha), or
> is there any other work around?
>
> Thanks.
>
>
Is your text in a dynamic text box, or static text box in
flash?
I don't think the issue concerns the "true-type" or not
"true-type" font.
In Flash, when text is part of a dynamic text box (which I
assume is the case in your situation),
then the font works just like in an html page:
if the font is installed on the computer it will show, if
not, it won't. The way around this, is to
embed the font data in the authoring flash file, and link it
to the dynamic text box, via actionScript.
So if you cannot work on the authoring Flash file with Flash
MX or Flash8, and if indeed we're
talking about a dynamic text box, your only option is to use
a web-safe font.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com

TextArea text not displayed correctly with ImageSnapshot

I am having an issue with the ImageSnapshot.captureImage command capturing the text in a TextArea. Attached are two files illustrating the issue. The "screenshot.jpg" pic shows how the TextArea controls are displayed on the screen. The "created jpg.jpg" pic shows how the text is displayed in the jpg that is created. Below is the code that creates the snapshot, everything is pretty standard there as far as I can tell. The text is obviously not sized the same from one to the other. Any ideas whats going on here or what I can do to correct it?
var myencoder:JPEGEncoder = new JPEGEncoder(50);
var imgss:ImageSnapshot = ImageSnapshot.captureImage(viewstack.selectedChild, 100, myencoder);
var fs:FileStream = new FileStream();
var ssfile:File = File.applicationStorageDirectory.resolvePath("ProjectImages/snapshot.jpg");
fs.open(ssfile, FileMode.WRITE);
fs.writeBytes(imgss.data, 0, imgss.data.length);
fs.close();
Thanks,
Scott

Scott,
Can you file a bug? http://bugs.adobe.com/flex
Thanks,
Jason

OTR text not displayed correctly

Hi,
I have view in which there are 3 tables with 3 colums each.
All the data binding etc is fine and it is displayed correctly in the portal.
My issue is with the OTR texts maintained. The text for column headings in the table is binded with the OTR texts (created through transaction sotr_edit) $OTR:<package>/<alias> in properties value field.
We have an option to change the language in the portal. So when a language is selected, the texts for these column heading is displayed in the corresponding language selected.
But for some langauges selected, the texts show some random language instead of the one selected.
Any idea on how this can be corrected.

Thanks for the reply Thomas.
And sorry for delayed reply.
I could see that the binding of the OTR was not correctly done with the texts.
After i made the changes, the languages were displayed correctly.
My concern here is that i have made the changes as this is a custom development and the issue was solved.
But this same issue is seen in a standard component where the text was not displayed in the language selected and this issue is coming only for the users assigned to a particular role. And for all others, the texts are displayed with the language selected.
Any inputs on this would be helpful.
Thanks.

Result text is displaying in German as "Ergebnis"

Similar Messages

Maybe you are looking for