Results fields are comming in display mode
hi guys,
While doing results entry for inspection lot ,the results fields are coming in display mode for some material numbers.some times its showing correctly(change mode).If i double click the result field its go to another screen there i can able to enter the result value.I checked inspection plan,lot and material but still the problem is coming,please help me to solve this problem.
thanks in advance
S.Murali
Hi,
You can check the condition in BADI at Display Button Click.
For Example.
If F_Code = 'BUTTON_DISPLAY'.
x_input = ' '.
x_display = 'X'.
endif.
Regards,
Sachin
Similar Messages
-
Data carrier & application field are not getting displayed in CV04N
Hi Guru's
In TCode : CV04N, data carrier & application field are not getting displayed.
While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
Let me know is there any configuration that has been missed out.
Regards
BhanuHi Bhanu,
Please note that the fields 'Data carrier' & 'Application field' are visible only if no document type is entered.
Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
Regards,
Pradeepkumar Haragoldavar -
Sold to Party and Ship to party field are in grey out mode in VA01.
Hi Friends,
I am facing a very critical situation, Please help me on this.
While creating the sales order by VA01, the Sold to Party and Ship to Party field are in grey out, so we cannot enter sold to party and ship to party. This is happening for all Order types.
And while checking the existing sales order by VA02, so I found that at Header level and Item level the Partner tab are disable
( mena partner tab are in grey mode,).
But when we click on sold to party field in VA02 it directly moves to partner but all Partner shown in Sales tab.
I have check all the partner function and partner determination configuration.
So can any one help me out in this, how in VA01 sold to party and ship to party field are in grey out mode.
How in VA02 the partner tab are disable.?
Thanks
Irfan Ullah
09370236510Hai Irfan Ullah,
In Sales - customer
1. Partners are listed (SP,BP,PY, SH)for account group and Partner Determination procedure(TA) is assigned to it
Now for sales order type you need to assign the partner determination process
SPRO
Sales and Distribution
Basic Functions
Partner Determination
Set Up Partner Determination
Execute
Set Up Partner Determination for Sales Document Header
Select TA - standard order from the right side list
and select Partner Determination Procedure Assignment (from left)
Now assign your sales type to Partner determination TA.
Create a SALES order you can find the sold to and ship to are editable.
Regards,
Mani -
Material Description Field to be in Display mode.
Hi Gurus,
I am trying to make the Material Description field in the Display mode for PR. I changed the screen layout value into display for screen variants ME51N and also for NBB. Then also it is not getting effected. please advice on this issue on what needs to be done from the config setting side. Thanks.
With Regards,
Saakithyan.Hi,
its fine that you made changes in NBB Field selection group for PR, but have you assigned that field selection group in Document type please check once,
untill and unless you assign the field selection group in Doc type you will not get the expected results.
Regards,
Ninad Kshirsagar -
All fields should be in Display mode except Plant field in Va02 and VA32
Respected Guru's,
I want all the fields in VA02 and VA32( Change t-codes) to be in display mode, further user should be able to change the Plant value alone in sales tab.
Is it possible to restrict it with the help of Authorization or does it requires customization.
Please Help me in this regard.
Thank tou,
DayaThanks for your information
What is the transaction code for that
ME29N - DISPLAY SCREEN SETTING ALREADY I HAVE DONE
account assignment category is working only at item overview level, input - k iS IN DISPLAY MODE
NOT account assignment tab fields
please give the transaction code information so that it will be helpful for me -
The Project Server fields are comming blank from TFS task
Hi,
I have a environment with Project Server 2010 integrated with TFS 2012.
When I create a task in TFS, the task is submited to approval in PS. The problem is with the TFS fields on PS:
Work Item ID
Work Item Type
Publish to Team Project
These fields are blank on PS, but the other fields as:
Work
Start and Finish Dates
Resource Names
are comming with correct values from TFS.
On Task Details (PS Approval Central) I can see the values from TFS (eg. below), but after approval, these values are missing in project line.
Update pending: 0h reported on 1/27/2015 8:24 AM
Details Actual Work : 0h → 0h
Remaining Work : 0h → 2h
Task Name : DP13 → DP13
Work Item Type (TFS) : → Task
Publish to Team Project : → Yes
Submitted Revision (TFS) : → 1
Work Item Id (TFS) : → 918
Active Assignment (TFS) : → YesHi Diego,
I am trying to involve someone to further look at this issue. There might be some time delay. Appreciate your patience and thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Fields are still in EDIT mode even after Saving the Transaction in UI
Hello Experts ,
We are facing one problem in UI .
We have added the BLOCK " Subject" in Complaint transaction ( BT120H_CPL) .
We are able to fill the data in the fields for subject block like " Code, Code Gruppe etc, but even after saving the transaction these fields are in Edit mode .
Can anyone give some pointers/solution to this ?
Regards
VBHello,
if the fields are in Edit mode or closed is controlled by the attribute VIEW_GROUP_CONTEXT of the controller class (*IMPL).
There are also methods to change this VIEW_GROUP_CONTEXT depending on the requirement like "DISABLE_VIEW_GROUP_CONTEXT".
But as i understood you correctly you do not have a own developed view but a SAP standard view. In this case i would create a OSS-Message for the issue.
But feel free to do some debugging on this VIEW_GROUP_CONTEXT.
Best regards
Manfred -
Hi,
I have added a new field in me23n transaction.Its coming in change mode.iam using user exit MM06E005 for adding the new field.How can i change the field to come in display mode?Can anyone suggest the function module in this exit where can i code.
Thanks,
Aparna.I made i_no_screen value 'X' but its not working.
When i create a PO using me21n,the value of the new field is getting saved in EKPO table.But when i use ME22N,ME23N,the value which is been saved in the EKPO table should get displayed in that field,but its not happening.
Also,the new field is coming in change mode in ME23N.
Which function module exit can i use here to do the above changes.
Thanks,
Aparna. -
How to change qty field as change mode to display mode in VL32N
Hi Guru's,
My requirement is for particular users quantity field in VL32N to display mode remaining users it should be in change mode.
We are already created a Security Object for this.
Can you please anyone help how to approach this requiremnt. Is there any standard BAdI for this.
Thanks in Advance.
Regards,
Sai RamaHi
There are Badi for this T-code
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
V53W0001 User exits for creating picking waves
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53C0001 Rough workload calculation in time per item
V50S0001 User Exits for Delivery Processing
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50R0002 Collective processing for delivery creation
V50R0001 Collective processing for delivery creation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT Delivery: Item Status Calculation
V02V0004 User Exit for Staging Area Determination (Item)
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0002 User exit for storage location determination
V02V0001 Sales area determination for stock transport
You can try with any one of them V53W0001, V50S0001, V50Q0001, V02V0004, also you can proceed with table auhtorization as there is need to check one table before entring in T-code as if user id is there then not able to edit.
Here don't make code like need to maintain all id's, if id is there then not able to edit, so to whom you don't want to allow maintain their id's in that.
Thanks
Bhupinder Singh Arora -
All fields are not displayed in SM30
Dear All,
I have created one Z-Table with 5 fields. For that Z-Table I have maintained table maintenance generator. Now in SM30 I am able to see only 3 fields, I have checked all the options but I am not able to find out what is the problem that 2 fields are not getting displayed.
Please tell me what might be the issue?
warm regards,
nishuHI,
While generating the TM there is oneoption which can disable some fields in sm30.
I think they may be the reason in your case.
regards, -
How to make a field from display mode to change mode for a perticular tcode
hi all,
my client want to change one field which is in display mode of a material doc in mb02.
Restrictions in some fields in MIGO needs to be changed.
Uploading point in case of issue: While editing the MIGO latter, this field needs to be edited.
Goods recipient in case of receipt: While editing the MIGO latter, this field needs to be edited.hi thanks for quick replay,
my requirement is, supose i post a material doc through migo in 101 mtype, in item detail, where tab i have given the good reciepitant and unloading point. but while i want to change that material doc in mb02, i saw unloading point is in change mode, but good reciepitant field is in display mode. my client requirement is to change that field. so for change that field, the field should be in change mode, so thats what i want.
i have checked in configuration side, but i didnt get any setting, i think we have to customize that standard screen.
any comments?
regards,
susanta
Edited by: susanta bindhani on Jun 19, 2008 2:18 PM -
Copying Control Fields are disable in SAP SD
Hi Friends,
I am having problem with copying control in SAP SD. While using T- Code VTAF, VTFF etc for copying control, I found all the standard fields are disable but I am able to do all the sale processing. Therefore me doubt is; when there is not even a single field is available in the copying control then how I am able to run all the activities. If these are hidden and maintained in background then how I can able to see the existing fields in copying control. Please reply as soon as possible and clear my doubt. I shall be great thankful to you for this.
Regards,
Bharat BHi Frank,
Thanks for yours kind response to my doubt but the question is still not solved. as i already explain in my question that the available standard fields are disable means they are not in display mode, else these are hidden/invisible, so please try to give me the appropriate answer for that..and one more thing i want to add i.e. standard fields means..the values avialable for source fields and target fields as per the sap standard..as there is no copyning control existing in the system..For instance; copying control from OR to F1, F2 etc, LF to F1, F2 etc are not shown in the system but i am able to process all the sales activities like sales order creation, Delivery Document and Billing Document creation, so i know that stuff that if the copying control is not available then system won't be aloww me to do the single transaction for sales processing..I know this is bit time consuming and cofusing too but i am having faith in YOU. I think now you have understood my problem..so please provide me the solution for that. I shall be great thankful for this.
Thanks and Regards,
Bharat B -
Copying Control Fields are disable
Hi Friends,
I am having problem with copying control in SAP SD. While using T- Code VTAF, VTFF etc for copying control, I found all the standard fields are disable but I am able to do all the sale processing. Therefore me doubt is; when there is not even a single field is available in the copying control then how I am able to run all the activities. If these are hidden and maintained in background then how I can able to see the existing fields in copying control. Please reply as soon as possible and clear my doubt. I shall be great thankful to you for this.
Regards,
Bharat BHi Friends,
Thanks for yours kind response to my doubt but the question is still not solved. as i already explain in my question that the available standard fields are disable means they are not in display mode, else these are hidden/invisible, so please try to give me the appropriate answer for that..and one more thing i want to add i.e. standard fields means..the values avialable for source fields and target fields as per the sap standard..as there is no copyning control existing in the system..For instance; copying control from OR to F1, F2 etc, LF to F1, F2 etc are not shown in the system but i am able to process all the sales activities like sales order creation, Delivery Document and Billing Document creation, so i know that stuff that if the copying control is not available then system won't be aloww me to do the single transaction for sales processing..I know this is bit time consuming and cofusing too but i am having faith in YOU. I think now you have understood my problem..so please provide me the solution for that. I shall be great thankful for this.
Thanks and Regards,
Bharat B -
Hi All,
I am working on modification of the dunning report script (SAP VERSION IS 4.6C) . My requirment is to add few more lines in the address window in the script. The address window is VARIABLE type. When I am trying to do change in the change mode of the script the window parameters are coming in display mode . I want to increase the height of the window. As the dimensions are in display mode I am not able to change.
please guide me.
Thanks ,
Vengal raoHi Vengalrao,
The Create, Change and Delete option in Zform are coming disabled because the original language in which the form was copied or created would be different than the language in which you are trying to edit.
You can only make changes in elements in forms original language only.
Revert in case i am not clear.
Thanks,
Daya. -
Sold to Party and Ship to party are in grey out mode in VA01.
Hi Friends,
I am facing a very critical situation, Please help me on this.
While creating the sales order by VA01, the Sold to Party and Ship to Party field are in grey out, so we cannot enter sold to party and ship to party. This is happening for all Order types.
And while checking the existing sales order by VA02, so I found that at Header level and Item level the Partner tab are disable
( mena partner tab are in grey mode,).
But when we click on sold to party field in VA02 it directly moves to partner but all Partner shown in Sales tab.
I have check all the partner function and partner determination configuration.
So can any one help me out in this, how in VA01 sold to party and ship to party field are in grey out mode.
How in VA02 the partner tab are disable.?
Thanks
Irfan Ullah
09370236510
Edited by: Lakshmipathi on Aug 4, 2011 4:30 PM
Thread Locked - Reason Cross PostedHai Irfan Ullah,
In Sales - customer
1. Partners are listed (SP,BP,PY, SH)for account group and Partner Determination procedure(TA) is assigned to it
Now for sales order type you need to assign the partner determination process
SPRO
Sales and Distribution
Basic Functions
Partner Determination
Set Up Partner Determination
Execute
Set Up Partner Determination for Sales Document Header
Select TA - standard order from the right side list
and select Partner Determination Procedure Assignment (from left)
Now assign your sales type to Partner determination TA.
Create a SALES order you can find the sold to and ship to are editable.
Regards,
Mani
Maybe you are looking for
-
Hi, My application is using ftp to connect to the server. but now it is going to change to sftp. For that I am not able to get what are the things in need to change in my ftp program to make it support for sftp. The following is the ftpbean class and
-
How to create authorization role for just displaying query prefix Q and X.
Hi Expert, I hope someone can help me on how to create authorization role for just displaying and executing BEX Queries prefix Q and X. I'm currently using SAP BI 7.1. Actually, I already created one role called : Z_FORINDO_ONLYDISPLAY_QX where I o
-
Xml/itl-"The file "iTunes Library.itl does not appear to be a valid..
"The file "iTunes Library.itl does not appear to be a valid iTunes library file. iTunes has attempted to recover your iTunes library and renamed this file to "iTunes Library (Damaged).itl" does enyone know how to fix this for ever? thanks.
-
Hi all I am having a qry which is returning the results as ORAXML. Now I ve to convert this oraxml to varchar2. How can i do that . Any idea about casting it to varchar2. Thanks in advance Upmish
-
I had had WOT installed for a couple of yrs. and I had no problems with it and depended on it to help me from going to nefarious sites. Then one day I received on screen that my homepage was a disreputable site. So, I deleted it. This morning I decid