Results of DMX query

I have this DMX query, which is written for Neural network model:
select t.*, predict ([module])
as [predictedvalue],vba!format
(predictprobability ([module]),'Percent')
as [probability] from [Neuronske mreže]
prediction join openquery ([moodle baza],
'select distinct Course from [dbo].[log] ')
as t on [Neuronske mreže].[Course]=t.Course
order by PredictProbability([Module]) desc
And I get results, but just one Module for one Course. Even if I remove "distinct", results show more same results for one course.
For example:
Course Predicted Value Probability
32 Forum 95%
But, on the course 32 there are more Predicted values, and I want to show them all, with their probability.
How could I do it?
Thank you in advance

For this DMX, course 32 will only have one output. If your original list has more than one course, then each individual course would have its own predicted value and probability.
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

Similar Messages

DMX Query, the most influential variable

Yours sincerely.
I'm doing work of data mining using decision trees, and I have the expected result: Predicted probability of dropping out, however I would like the result, by DMX query, throw me the most influential variable in the above probability .
For example if Marco, has a 90% chance of dropping out, tell me what was the most influential variable for this probability, which can be Sex, Age, City, etc..
I have in my data mining model, named Tree, variables such as sex, age, marital status, district, etc., and my view of the data, Vista_Datos, fields such as customer name, phone, email, Prov.; so my query resulted DMX follows.
Select
(T. [CustomerName]) as [Customer]
(T. [date]) as [Date of Appointment]
t. [Department],
t. [Province]
t. [District]
(T. [address]) as [Address],
(T. [telephone]) as [Phone Fixed]
(T. [Cell_Phone]) as [Cell Phone]
(T. [email]) as [E],
PredictProbability ([Tree]. [Desertion], 0) * 100 as [Probability of Defection]
From
[Tree]
PREDICTION JOIN
OPENQUERY ([Source Mining]
'SELECT
[CustomerName]
[Date],
[Department],
[Province]
[District]
[Street address]
[telephone]
[Cell_Phone]
[Email]
FROM
[Dbo]. [Vista_Datos]
') AS t
ON
[Tree]. [Department] = t. [Department] AND
[Tree]. [Province] = t. [Province] AND
[Tree]. [District] = t. [District] AND
where (PredictProbability ([Tree]. [Desertion], 0) * 100)> 50
I need to modify the query to get the most influential variable in the prediction result.
I hope I have been clear so they can help me.
Thank you for your attention.

select * from [Model_Name].content
returns you all the information about the model (all the nodes in the tree).
select NODE_UNIQUE_NAME from [Model_Name].content where NODE_TYPE=2
returns NODE_UNIQUE_NAME of the root node. If you want to find all children of the root node (all the first splits) you can execute query like
select * from [Model_Name].content where [PARENT_UNIQUE_NAME]='000000004'
where '000000004' is NODE_UNIQUE_NAME of the root node.
Tatyana Yakushev [PredixionSoftware.com]

MDX query with a DMX query

Hi All,
Do I have a way to run a MDX query with a DMX query? (Avoiding the “link server” options… )
I need to get the cube last update date like this DMX query:
SELECT 1
as CubeStatus
FROM $System.MDSCHEMA_CUBES
where
format(LAST_DATA_UPDATE,
'dd/MM/yyyy') = format(now(),
'dd/MM/yyyy') --"1" means that the cube was processed, NULL cube did not process today
and cube_source = 1
and cross reference it to a result I get from this MDX query:
with
member measures.LastDateCube
as [Comm Date UTC].[Date].currentmember.PROPERTIES("KEY")
select measures.LastDateCube
on 0 from comms
the purpose of this is to know for sure that my current member (date integer) is equal to the cube last update date. thus, making sure the cube was processed and I get the correct member I expect.
What do you think?
Thank you
Yoni.

Hi yonibiel,
According to your description, you want to combine a DMX query with a MDX query. Right?
In SQL Server, it is not supported to parse the MDX query without connecting the SSAS database server. So if you want to combine the DMX and MDX query into one dataset, the only way is using linked server to SSAS in openquery() function.
In this scenario, if you render these data from two result sets for reporting purpose, I assume you using SSRS, you can create two datasets and use lookup() to combine data fields from two datasets into one data region.
Reference:
Joining the results of two MDX queries together
Best Regards,
Simon Hou
TechNet Community Support

How do you use BOBJ SDK to retrieve the results of a query in XML

I am trying to programatically get the results of a query given the query id
My old code used BusinessObjects Enterprise Web Services API to Retrieve a document's contents
DocumentInformation biDocInfo;
RetrieveData retBOData = RetrieveData.Factory.newInstance();
Action[] actions = new Action[1];
retBOData.setRetrieveView(xmlView);
biDocInfo = rEngine.getDocumentInformation(queryId, null, actions, null, retBOData);
(XMLView) biDocInfo.getView();
Is there an equivalent way to retrieve the results of the query using SAP BusinessObjects BI 3.x Developer SDK Library ?
Thanks for any information

Hello.
Are you wanting to use the BusinessObjects Enterprise SDK along with the Report Engine SDK as opposed to using the Web Services SDK that you were using previously?
Also, what part of a webi document are you trying to get the XML format of?
- Whole document
- Single report within a document
- Report page of a report
- Report part within a report
- All data providers
- Single data provider
If you are trying to use Business Objects Enterprise along with the Report Engine SDK, there are numerous samples for the various parts of the webi document that I mentioned above available at the following link:
http://wiki.sdn.sap.com/wiki/display/BOBJ/JavaReportEngineSDKSamples
I hope that this information helps.
Regards.
- Robert

How to compare result from sql query with data writen in html input tag?

how to compare result
from sql query with data
writen in html input tag?
I need to compare
user and password in html form
with all user and password in database
how to do this?
or put the resulr from sql query
in array
please help me?

Hi dejani
first get the user name and password enter by the user
using
String sUsername=request.getParameter("name of the textfield");
String sPassword=request.getParameter("name of the textfield");
after executeQuery() statement
int exist=0;
while(rs.next())
String sUserId= rs.getString("username");
String sPass_wd= rs.getString("password");
if(sUserId.equals(sUsername) && sPass_wd.equals(sPassword))
exist=1;
if(exist==1)
out.println("user exist");
else
out.println("not exist");

How to use Results from Another Query for SAP BW universes

Hi Everyone,
I have two SAP BI universes.In my First universe I have Sales Doc no (dimension) and Orderqty (Measure) and in my second universe I have Sales Doc no(Dimension) and BillQty (Measure).
Here in my first dataprovider I have 1200 rows of data and in second dataprovider I have 75,000 rows. The report should fetch only the BillQty details that matches to corresponding Sales doc no in first data provider.
I want to place all these fileds into a single report like as shown.
(Datarpovider1) (Datarpovider1) (Datarpovider2)
*Sales Doc No* Orderqty BillQty
Here I am able to generate single report using merge dimension but it is leading to performance issues. I want to restrict the values at query level by passing the First dataprovider Sales doc no to second Data provider Sales doc number using Results from Anothery Query feature so that It can fetch only the matching records.
I tried it but it was giving the follwing error:
A filter contains a wrong value. You cannot run this query. (Error: WIS 00007)
How Can I get rid of this error. Can we use Results from Anothery Query option for OLAP universe. Are there any limitation on it.
All this I am doing in Webi Rich Client.
Appreciate your help
Thanks &in Advance
Kiran Saka

Hi Kiran,
I think the filter has a wrong operand. For example, a filter with an empty constant, or a filter that deals with numeric values is defined with an alphanumeric value.Check out for this.
Regards,
Neeraj

How to use one query results in another query

hi,
in help.sap I have founded that using variable type replacement path I can use one query results in another query. It is wrote there that I have to choose query name results I want to get in variable definition but I do not know where.
How I can do this?
Result I want to get is:
In one query I have material prices in another material quantities. I want to calculate inventory value (price * quantity). Moreover prices are on plant level, quantities on storage type level. Plant is atribute of storage type.
Can I do this?
Regards,
Andrzej

Hi Andrzej,
please check out this thread: Set parameters values depending on other parameters
I had a discussion about query results as input for another query in there.
For creating a workbook, just click on the save button after you ran your query in the bex.
Siggi
Message was edited by: Siegfried Szameitat

How to execute a procedure depending on the result of a query?

Hello, I'm new in ODI.
I want to execute a procedure depending on the result of a query Oracle table.
We have a Oracle Table whit a column that contains two possibles values.
I want read the table, row by row, and depending on this value, execute a Procedure or execute another.
How can i do?

what you need to do is
1. create a variable which "new_var2" which has the count of the number of rows you want to process. must be data type numeric.
2. copy "new_var2" to the package screen.
3. duplicate the "new_var2" on the package screen and evaluate the variable and test for "> 0" zero, call it "new_var2_E"
3. create a new odi variable "new_var1" with a refresh of "select field1 fom (select field1,rownum as rownumber from tablex) where rownumber = #new_var2" in the relevant schema and technology.
4. copy "new_var1" into your package (some where in the flow)
5. right click the "new_var1" variable in you package screen and you should get the option duplicate step (click on that)
6. select the the duplicate "new_var1" on the package screen and correct the the name to something meaning full to you "new_var1_E", also change the "type" to "evaluate variable" then you should see a "value" box. enter one of the values you want to test in the box (remember do not put in quotes ' )
7. now back on the package screen join the "new_var1" to the "new_var1_E" with an OK line
8 you now join "new_var2" to "new_var2_E" with OK
9 you join "new_var2_E" to "new_var1"
10. you then join the "new_var1_E" with an OK or a KO line to the relevant procedure.
12. you need to duplicate "new_var2" in the package screen one more time this time and call it "new_var2_D" set the type to evaluate and then select the increment of -1
13. the relevant procedure to "new_var2_D" with an OK
14. join the "new_var2_D" to the "new_var2_E" with an OK
15. this should close off the loop now the exit point is "new_var2_E" with a KO line to the next part of your process....
Basically you should end up with a loop on new_var2 decementing, and it is used to get a specific next record row from your table.
Hope this helps, sorry it is a little long winded..
Edited by: DavidGD on Feb 8, 2009 3:29 PM

Is it possible to put the results from a query in a variable to use in the bean class?

Hello, I'm using JDeveloper 12.1.2.0.0
I would like to keep the result of my queries (the method i created in the AppModule) in a RichTable or other type of variable so i can have the results stored and i don't have to do unnecessary queries after. I don't think the query is the problem but keeping the results.
I've tried to do that by using this:
    public String testVFactSales(String conditions) {
        PreparedStatement query = getDBTransaction().createPreparedStatement("" + "select * from v_fact_sales " + conditions, 0);
        //ResultSet rs;
        ResultSet result;
        //RichTable result;
        //String result = null;
        try {
            //query.setString(1, conditions);
            // query.execute();
            query.execute();
            result = query.getGeneratedKeys();
            query.close();
            System.out.println("Result: " + result.toString());
            return result.toString();
        } catch (SQLException e) {
            e.printStackTrace();
        return "";
As you can see, i've already tried some solutions but so far i only get errors (cannot convert or null exception, when i try to put the result in a richtable in my bean class)
Any ideas?
This is very important for me, since it would improve the performance of my project a lot.
Regards,
Frederico.

Hey Arunkumar,
I came to this conclusion since i'm using binding variables with my where clauses.
I've measured the time and i get really bad time responses.
This is my main table query, where all the others selections will be filter the search in this table:
SELECT VFactSalesNew.N_SALES,
       VFactSalesNew.QUANTITY,
       VFactSalesNew.PRICE,                               ,
       VFactSalesNew.FK_STORE,
       VFactSalesNew.ID_ANO,
       VFactSalesNew.QUARTER
FROM V_FACT_SALES_NEW VFactSalesNew
WHERE
((nvl(:var_dimCoin,'0') ='0' OR FK_COIN IN (select * from THE(select cast( in_list(:var_dimCoin) as mytableType ) from dual ) a) )
AND
(nvl(:var_dimProduct,'0') ='0' OR FK_PRODUCT IN (select * from THE(select cast( in_list(:var_dimProduct) as mytableType ) from dual ) a) )
AND
(nvl(:var_dimCustomer,'0') ='0' OR FK_CUSTOMER IN (select * from THE(select cast( in_list(:var_dimCustomer) as mytableType ) from dual ) a) )
AND
(nvl(:var_dimStore,'0') ='0' OR FK_STORE IN (select * from THE(select cast( in_list(:var_dimStore) as mytableType ) from dual ) a) )
AND
(nvl(:var_dimSeller,'0') ='0' OR FK_SELLER IN (select * from THE(select cast( in_list(:var_dimSeller) as mytableType ) from dual ) a) )
AND
(nvl(:var_dimProject,'0') ='0' OR FK_PROJECT IN (select * from THE(select cast( in_list(:var_dimProject) as mytableType ) from dual ) a) )
AND
(nvl(:var_ano, '0') ='0' OR ID_ANO IN (select * from THE(select cast( in_list(:var_ano) as mytableType ) from dual ) a) )
AND
(nvl(:var_treemap,'0') ='0' OR PK_REGION IN (select * from THE(select cast( in_list(:var_treemap) as mytableType ) from dual ) a) )

Getting a "Displaying only the newest results below. To view all results, narrow your query by adding a filter" message in error

I have a list with almost 10000 items. I have a view that should be returning 8 items. For me, the Farm Admin, I see the full set of expected values. The message "Displaying only the newest results below. To view all results, narrow your query by
adding a filter" shows for other users. This makes no sense -
there ARE filters on this view. I'd rather not increase the throttle limit.
Anthony Kelly

Hi Ajk,
Check that the list is not scoped by an audience; but, I'm afraid that either way admin, (e.g. non Farm admin or site collection admin)
I'd recommend exporting to excel, create two new spreadsheets and then import as custom lists.
Best of luck and cheers,
Stacy Anothersharepointblog.blogspot.com

Weird result of oracle query before and after function base index creation

Hi All,
Here is the unique situation we are facing after creating just an index.
The query result before the index and the query result after the index do not match.
This is very illogical situation. Shidhar and me have done lot of R&D, also tried to get lots info from Google but we couldn't decipher the reason for that.
I am giving you all the details about the query, index and tables with following steps.
Please let us know if anything is going wrong from our side or is it a bug at oracle level which is a rarest possibility but a possibility.
Step 1 :- Create table
create table TEMP_COMP
ID VARCHAR2(10),
GROUP_ID VARCHAR2(10),
TRAN_DATE DATE,
AMT_1 NUMBER,
AMT_2 NUMBER,
AMT_3 NUMBER
Step 2 :- Insert Sample data
set feedback off
set define off
prompt Deleting TEMP_COMP...
delete from TEMP_COMP;
commit;
prompt Loading TEMP_COMP...
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('01', 'G01', to_date('01-03-2007', 'dd-mm-yyyy'), 1, 11, 111);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('02', 'G01', to_date('02-03-2007', 'dd-mm-yyyy'), 2, 22, 222);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('03', 'G01', to_date('03-03-2007', 'dd-mm-yyyy'), 3, 33, 333);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('04', 'G01', to_date('04-03-2007', 'dd-mm-yyyy'), 4, 44, 444);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('05', 'G01', to_date('05-03-2007', 'dd-mm-yyyy'), 5, 55, 555);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('06', 'G01', to_date('01-03-2008', 'dd-mm-yyyy'), 6, 66, 666);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('07', 'G01', to_date('02-03-2008', 'dd-mm-yyyy'), 7, 77, 777);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('08', 'G01', to_date('03-03-2008', 'dd-mm-yyyy'), 8, 88, 888);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('09', 'G01', to_date('04-03-2008', 'dd-mm-yyyy'), 9, 99, 999);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('10', 'G01', to_date('05-03-2008', 'dd-mm-yyyy'), 10, 100, 1000);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('01', 'G01', to_date('01-03-2007', 'dd-mm-yyyy'), 1, 11, 111);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('02', 'G01', to_date('02-03-2007', 'dd-mm-yyyy'), 2, 22, 222);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('03', 'G01', to_date('03-03-2007', 'dd-mm-yyyy'), 3, 33, 333);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('04', 'G01', to_date('04-03-2007', 'dd-mm-yyyy'), 4, 44, 444);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('05', 'G01', to_date('05-03-2007', 'dd-mm-yyyy'), 5, 55, 555);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('06', 'G01', to_date('01-03-2008', 'dd-mm-yyyy'), 6, 66, 666);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('07', 'G01', to_date('02-03-2008', 'dd-mm-yyyy'), 7, 77, 777);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('08', 'G01', to_date('03-03-2008', 'dd-mm-yyyy'), 8, 88, 888);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('09', 'G01', to_date('04-03-2008', 'dd-mm-yyyy'), 9, 99, 999);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('10', 'G01', to_date('05-03-2008', 'dd-mm-yyyy'), 10, 100, 1000);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('01', 'G02', to_date('01-03-2007', 'dd-mm-yyyy'), 1, 11, 111);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('02', 'G02', to_date('02-03-2007', 'dd-mm-yyyy'), 2, 22, 222);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('03', 'G02', to_date('03-03-2007', 'dd-mm-yyyy'), 3, 33, 333);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('04', 'G02', to_date('04-03-2007', 'dd-mm-yyyy'), 4, 44, 444);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('05', 'G02', to_date('05-03-2007', 'dd-mm-yyyy'), 5, 55, 555);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('06', 'G02', to_date('01-03-2008', 'dd-mm-yyyy'), 6, 66, 666);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('07', 'G02', to_date('02-03-2008', 'dd-mm-yyyy'), 7, 77, 777);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('08', 'G02', to_date('03-03-2008', 'dd-mm-yyyy'), 8, 88, 888);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('09', 'G02', to_date('04-03-2008', 'dd-mm-yyyy'), 9, 99, 999);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('10', 'G02', to_date('05-03-2008', 'dd-mm-yyyy'), 10, 100, 1000);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('01', 'G03', to_date('01-03-2007', 'dd-mm-yyyy'), 1, 11, 111);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('02', 'G03', to_date('02-03-2007', 'dd-mm-yyyy'), 2, 22, 222);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('03', 'G03', to_date('03-03-2007', 'dd-mm-yyyy'), 3, 33, 333);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('04', 'G03', to_date('04-03-2007', 'dd-mm-yyyy'), 4, 44, 444);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('05', 'G03', to_date('05-03-2007', 'dd-mm-yyyy'), 5, 55, 555);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('06', 'G03', to_date('01-03-2008', 'dd-mm-yyyy'), 6, 66, 666);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('07', 'G03', to_date('02-03-2008', 'dd-mm-yyyy'), 7, 77, 777);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('08', 'G03', to_date('03-03-2008', 'dd-mm-yyyy'), 8, 88, 888);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('09', 'G03', to_date('04-03-2008', 'dd-mm-yyyy'), 9, 99, 999);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('10', 'G03', to_date('05-03-2008', 'dd-mm-yyyy'), 10, 100, 1000);
insert into TEMP_COMP (ID, GROUP_ID, TRAN_DATE, AMT_1, AMT_2, AMT_3)
values ('11', 'G01', to_date('03-03-2008', 'dd-mm-yyyy'), 100, 200, 300);
commit;
prompt 41 records loaded
set feedback on
set define on
prompt Done.
Step 3 :- Execute the query.
SELECT GROUP_ID
, SUM(LAST_YR_REV) as "Year_2007_Amt"
, SUM(CURR_YR_REV) as "Year_2008_Amt"
FROM (
SELECT GROUP_ID,
CASE WHEN TO_CHAR(TRAN_DATE,'YYYYMM') BETWEEN'200701'AND'200712'THEN SUM(AMT_1) ELSE 0 END AS LAST_YR_REV ,
CASE WHEN TO_CHAR(TRAN_DATE,'YYYYMM') BETWEEN'200801'AND'200812'THEN SUM(AMT_1) ELSE 0 END AS CURR_YR_REV
FROM TEMP_COMP t
WHERE GROUP_ID ='G01'
AND TO_CHAR(TRAN_DATE,'YYYYMM') BETWEEN'200601'AND'200912'
GROUP BY GROUP_ID, TRAN_DATE
GROUP BY GROUP_ID
The result of above query
GROUP_ID Year_2007_Amt Year_2008_Amt
G01 30 180
Step 4 : Create composite index
create index GROUP_ID_TRAN_DATE_IDX on TEMP_COMP (GROUP_ID, TO_CHAR(TRAN_DATE,'YYYYMM'))
Step 5 : Execute once again query from step 3.
SELECT GROUP_ID
, SUM(LAST_YR_REV) as "Year_2007_Amt"
, SUM(CURR_YR_REV) as "Year_2008_Amt"
FROM (
SELECT GROUP_ID,
CASE WHEN TO_CHAR(TRAN_DATE,'YYYYMM') BETWEEN'200701'AND'200712'THEN SUM(AMT_1) ELSE 0 END AS LAST_YR_REV ,
CASE WHEN TO_CHAR(TRAN_DATE,'YYYYMM') BETWEEN'200801'AND'200812'THEN SUM(AMT_1) ELSE 0 END AS CURR_YR_REV
FROM TEMP_COMP t
WHERE GROUP_ID ='G01'
AND TO_CHAR(TRAN_DATE,'YYYYMM') BETWEEN'200601'AND'200912'
GROUP BY GROUP_ID, TRAN_DATE
GROUP BY GROUP_ID
The result of above query
GROUP_ID Year_2007_Amt Year_2008_Amt
G01 0 210
Thanks
Sunil

I just wanted to make a comment. The predicates in both your queries are flawed I believe. You convert a date column to a character and then you say only pick the converted result between two sets of characters.
TO_CHAR(TRAN_DATE,'YYYYMM') BETWEEN'200601'AND'200912'It should be coded like this for a proper date range comparison:
TRAN_DATE BETWEEN TO_DATE('200601','YYYYMM') AND TO_DATE('200912','YYYYMM')That will eliminate the need for you to create FBI that you created. You should now be able to create a regular (B*Tree) index on the TRAN_DATE column.
Also, now that we have the structure of your tables and sample data, what business question are you trying to answer? I think there is a better query that can be written if we know the requirements.
Hope this helps!

Result of the query is not filtered as value given in Select Option variabl

Hello ,
A Select option Variable is created on Navigational Attribute( ZINV_PROG) of 0WBS_ELEMT.
The Compound Key for object ZINV_PROG(Investment program) is APPR_YEAR( Approval Year)
This ZINV_PROG object does not bear Master data.
The values in the field get populated as you load Master data of 0WBS_ELEMT.
The values for this objects is as shown below:
APPR_YEAR ZINVPROG
2005 ESCCCAPS
2007 ESCCCAPS
2008 FIRE
2006 CAPITAL
A select option variable is craeted on this Navigational attribute.
When you execute the query , On the selection screen of the query..
If you provide i/p for Investment programm field as 2007 ESCCCAPS, the data should ideally be filtered for this values only.
But the result of the query shows data for both values 2005 ESCCCAPS and as well as for 2007ESCCCAPS.
Let me know how to sort this issue.
Points will be assigned for the correct and helpfull answere.
Thanks,

Thanks Srini for your prompt explanation.
My Question is if Approval year is a compounded key of ZINV_PROG object why data would not get filter out directly.
I mean on the screen for this particualr variable i take help - F4 to see values there you are able to see all the values of Investment programm along with the apprroval year.
If i select value as 2005 ESCCCAPS from the help F4 screen then ideally data should be fileterd out for this particular value. But it is not happening so.
Is that so in Query desgining that if you creating a variable on Nav Attribute, and that particular Nav attribute has a compound key then if you want to filter out the data for this Nav attribute correctly you would also require to create a variable for Compound key also.
Please let me know
Thanks

Unable to display results of multiple query in grid in Oracle SQL Developer

Hi, I am a newbie to this forum and couldn't find the Oracle SQL Developer forum so posting it here.
My question: How to display multiple query results in grid in Oracle SQL Developer.
Example:
select * from Employee;
select * from Department;
- when I select both the queries and hit F5 in Oracle sql developer. By default it displays in output window.
- How to display result of both the queries in Grid.
Any thoughts on this would be really helpful.
Thanks in advance.
Harsh

Hi Harsh,
I'd say that the Results grid is designed to only show the results of 1 query at a time. I don't know/can't see how it would display multiple queries at a time.
I would suggest either joining your tables to create a single query or opening another SQL Worksheet for one of the queries so that you can display the results side-by-side.
Maybe you could explain what you're trying to do. Why are you trying to display multiple results in the same query grid?

How to get result of select query from oracle in VC

Dear All ,
I have a application in oracle which insert the data in the oracle database table.
Now i want to show all the data that has been inserted into the database table in my VC application but i don't know how to handle select query in VC.
Regards
Krishan

Hi Goivndu
Thanks for your reply .
I know all those things.
I have created the system & alias for my backend oracle system.
I can also see all the stored procedure that are there in my oracle system.
I just want to know how to write a select query in a stored procedure .
you can insert data , Update data through oracle procedure but i don't think there is any way to get the result of select query in stored procedure .
If you know any way to do that please do let me know .
Regards
Krishan

Simbol X in the row of results in a query

Hi group,
I have a small question about results in a query. When I open the query, in some rows for results appears the simbol X. If I click right button=> calculate=> sumation, the figure appears right. The problem is I have to do it manually for every row of results everytime I run the query.
Does anyone know how to do it automatically to get the results instead of the X every time that the query is run??
Thank in advance,
David

I have tried it, but still not working....there is not units in the amounts that are to be summed...In facts, it works when i set the calculation of results as summation.
The only problem is that any time that i run the query, again the calculation of results appears as "nothing defined", so i have to change it everytime...
There is any option to set the calculation of results ALWAYS as summation??????
Thanks for your answers!!!!
David

Results of DMX query

Similar Messages

Maybe you are looking for