Resume location tracking when Map control is in foreground again

As windows phone 8.1 does not have background location tracking, so then how to track the current user position, routes travelled, distance covered, time remaining etc. once
the user comes back to our app foreground, because once in background we only play with geofences, so how to resume with the correct data(like the user location, maproutes etc) in the foreground again if the user comes back to our app and has travelled certain
distance.
Any help or knowledge on the same.
Thanks In Advance.

Why not use Background Task to refresh your current location: http://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh977056.aspx
Best Regards,
Please remember to mark the replies as answers if they help

Similar Messages

  • I have an Imac in my bedroom and apple tv hooked to my big screen in my living room. When I select mirror Imac on the Imac to view on the big screen in living room, can I get a wireless keyboard and track pad to control Imac from living room?

    I have an Imac in my bedroom and apple tv hooked to my big screen in my living room. When I select mirror Imac on the Imac to view on the big screen in living room, can I get a wireless keyboard and track pad to control Imac from living room?

    I do something like that, and can confirm 20 feet won't be a problem. More than 30 or so might be.

  • Locate button in Maps

    I am having problems with my iPhone 3G knowing where I am. In playing around with the Maps app, I press the Locate button in the lower left. When I first open the program it is a greyish blue color. I press it to locate where I am and it turns blue. It shows that I am about 15 miles from where I actually am. I can press it again and it turns greyish blue again or I can press it once more and it turns blue again. What are these different colors for?
    The goofy thing is that my wife's identical phone most often is right on. My varies from 15 miles northeast of where I really am to 10 miles south of where I really am. I think that sometimes it tries to use my router location and sometimes my cell tower location, but never GPS.

    When the Location button is blue Maps is tracking your location. When it isn't blue it isn't tracking your location.
    The Maps application uses 3 methods to locate you; known WiFi hotspots, cell towers, and GPS. GPS will only work outdoors with good visibility of the sky in all directions. WiFi and cell tower triangulation provide location when GPS isn't available, and also get an approximate location that GPS refines oce it gets a lock on 4 satellites.
    If you have GPS reception your location should always be correct to within 10 meters. When you have a GPS lock the location pin will pulse. If you don't, but you have nearby WiFi hotspots, it will use those. But if a known WiFi hotspot has been moved recently that can be very inaccurate. Cell Tower triangulation is also approximate, but should locate you reasonable well.

  • WP8 Map control with custom tiles

    I'm trying to display a map control in my app targeting Windows Phone 8 but I want to use custom tiles from open street map.
    I'm using this line :
    mapControl.TileSources.Add(new TileSource("http://a.tile.openstreetmap.org/{zoomLevel}/{x}/{y}.png"));
    When I launch the app the custom tiles are properly displayed, but there's still the default map tiles underneath them.
    I tried to hide them, but I counld'nt even find where they exist in the map control and what is displaying them exactly.
    I would like to know how I can remove those default tiles when loading custom tiles.
    I tried to hide them, but I counld'nt even find where they exist in the map control and what is displaying them exactly.

    Hi MakanWG,
    You have solved your question in here:
    http://stackoverflow.com/questions/27948331/wp8-map-control-with-custom-tiles .
    Good!
    Vote if help you

  • Adobe Premiere Elements 11 in the 'minimize' state "tracks" when moved across screen...

    I have finally found time to work on and to learn how to use my recently purchased Adobe Premiere Elements 11 (APE11) and Adobe Photoshop Elements 11, using Adobe’s respective ‘Classroom In A Book’ training aid I recently purchased. To my disappointment when I open Adobe Premiere Elements 11 in the 'minimize' state it “tracks” when I try to move it across the screen, (see images), making it impossible and unacceptable to use. It only happens with APE11 and not with Photoshop, Premiere Organizer, MS Office Suite Programs (Word, Excel, PowerPoint, Outlook, Etc.), or any other programs on my computer. Also, the “tracking” doesn’t happen to a video within the APE11 video working space. I have installed this instance of APE11 twice to no avail using the Adobe defaults. See the added images for the current configuration of my PC and the APE11 version I have. I noticed in APE11’s Properties that I don’t have Compatibility checked-off because I never have had a previous version (see image). I do the Microsoft & Windows 7 updates regularly. This PC was purchased and configured to work on photo and video editing & manipulation, along with my everyday use. [Purchased on 2/22/13 from a reputable company Computer Links, Burlington, NC 27215, 336-226-4738 Invoice# 148599, (Technician: Matt). I am not a computer science person, which is why I relied on Matt to configure my PC. As this appears to be an AEP11 issue I am relying on you to resolve the issue verse Matt. Your support with this is much appreciated.
    I had one person kindly suggest "Could you try to update your graphic card drivers, if they are not current"? If I knew how to & where located on PC I would consider it, however I would think it would be current as it was new when PC was purchase 2/22/13 and if it was out-of-date why wouldn't the other programs on the PC also 'track', such as Adobe Photoshop Elements, MS Ofiice Suite programs, etc.? (PS: I thought I posted this in the Adobe Premiere Elements area 5/19/13, apparently I posted it in the "Downloading, Installing, Setting Up" discussions area instead, & didn't see a way to move it?? I started in APE11 Area.)

    ATR and Reese,
    It appears Matt solved my issue earlier today and I have been testing it without a failure.
    Matt determined it was the Personailization "Themes" I was using. I had the Theme "Windows Classic" selected from the "Basic and High Contrast Themes..." group, and when he changed it to one of the "Aero Themes" the Adobe Premiere Elements "TRACKING" problem went away. He and I are not sure why it works by changing the theme, but it appears to. Using the Aero Theme continues toi allow me to use my own photos for "Desktop Background" and "Screen Saver".
    The path to it is via the PC display by right clicking your mouse, select "Personalize", select one of the "Aero Themes" and go from there according to personal taste. See image below:
    Note: Something for Adobe to consider going forward, if the above remains a solution. Matt says as I am using Windows 7 I have a selection between Themes, either "Windows Classic" from the "Basic and High Contrast Themes..." group or one of the "Aero Themes" (which resolved my Tracking problem), however Windows 8 did away with the "Aero Themes" and there isn't a choice then what? He isn't sure if there will be a tracking problem or not.
    ATM any thoughts on why the above Themes setting would make a difference?
    ATM thanks for all your help, along with Matt of Computer Links, Burlington, NC , 336-226-4738. I will update this posting as events occur, both good and bad.
    Cheers and Regards,
    Mike (Ghost1013)
    <><><><><><><><><><><><>
    Mike Higgins
    >M&W Miniature Llamas
    >>Gibsonville, NC 27249
    >>>[email protected]
    >>>>www.mwminillamas.com
    >>>>><><><><><><><><><><><><>

  • Rapid install gettin error when create control file

    hai all ,
    i faced problem when im install fresh ebs R12
    my environment :
    sun sparc 64 bit
    solaris 11
    this occur when i try to install fresh R12
    using rapidwiz , the error say ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
    and when creating control file failed,
    is any clue with this problem ?
    all prerequisite  reference to doc :
    R12.1.1 : Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1)
    the detail log below this
    Log file located at /oracle/PROD/db/tech_st/11.1.0/appsutil/log/PROD_SMJKT-PRFND01/ApplyDatabase_11071358.log
    ^M
      |      0% completed       ^M
      /      0% completed       ^M
      -      0% completed       ^M
      \      0% completed       RC-50004: Fatal: Error occurred in ApplyDatabase:
    Control file creation failed
    Cannot execute configure of database using RapidClone
        RW-50010: Error: - script has returned an error:   1
    RW-50004: Error code received when running external process.  Check log file for details.
    Running Database Install Driver for PROD instance
    Connected to an idle instance.
    ORACLE instance shut down.
    Connected to an idle instance.
    ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
    ORA-01078: failure in processing system parameters
    CREATE CONTROLFILE REUSE SET DATABASE "PROD"
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0
    alter database open resetlogs
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0

    hai asif,
    solved my problem , with this doc
    Oracle VM Server for SPARC (previously known as LDoms or Logical Domains) :
    To set the number of VCPUs for a given Logical Domain (LDom), use the 'ldm(1M)' with the 'set-vcpu' option:
    # /opt/SUNWldm/bin/ldm set-vcpu <number> <logical_domain>
    For example to configure eight VCPUs for the Logical Domain named "ebs1":
    # /opt/SUNWldm/bin/ldm set-vcpu 8 ebs1
    Please review the Logical Domains Administration guide for detailed information.
    Users can then revert the number of VPUs to the original or desired values as a post EBS install step.
    thanks a lot..
    regards
    Imrons

  • How to inspect used location in a mapping OWB Rel2?

    I have exported the Warehouse Builder metadate from a server and imported in another server. The I have allocated the modules to new defined locations. When trying to validate the metadata in a module I get the error VLD-1134 Invalid location and configured location for operator does not exist or is not a valdid location under the referenced module. How can I inspect the location changed it to a valid connector?

    Have you registered the location?
    If you didn't follow this steps.
    Locations are registered automatically by deployment. Alternatively, you can explicitly register a location in the Control Center.
    To register a location:
    1. Open the Control Center Manager and select a location from the navigation tree.
    2. From the File menu, choose Register.
    The Location dialog box appears.
    3. Check the location details carefully.
    Click Help for additional information.
    4. Click OK.
    To unregister a location:
    1. Open the Control Center Manager and select a location from the navigation tree.
    2. From the File menu, choose Unregister.
    3. Click OK to confirm the action.
    If you did registered locations, then try to check if OWB did created a valid DB Link for this location querying the all_db_links view.
    Regards,
    Marcos

  • Finding photos after upgrade to 7.1.1 by location on a map

    I have updated my ipad to 7.1.1 but cannot find my photos by location on the map. I have followed the ipad manual where it days tap the > when viewing in years but I have no > icon. All my photos appeared on a map prior to upgrade - can anyone help?

    You're welcome. I don't think there were any changes with the IOS 7.1.1 upgrade but I can't say for sure as I'm still at IOS 7.0.4. Hopefully someone else knows the solution, without locations I don't know how to pull up the map, sorry.

  • IOS 8 crashes when maps appear.

    Ever since I purchased my iPhone 6 in November, I've had apps crash on me whenever a "locating map" appears onscreen. If I browse my Facebook app's newsfeed and see someone has shared their location (where a map showing there location appears) the whole app crashes. It's not just the Facebook app, it crashes whenever a map of locations appears any app (Ex: Find iPhone crashes before the map appears; Starbucks crashes when I look up Starbucks locations near me). The weird thing is that Google maps works fine, but Apple maps crashes. Does anyone have any solutions? I feel like I'm not the only one with this problem.

    The problem is solved. Just update to iOS 8.2 and it fixes the problem right away. My phone works perfect...for now lol

  • Ios 4.2.1 Location service of Maps not working offline

    after upgrade to ios 4.2.1. i just checked location service of Maps with cellular data 'off'/3g off/wifi off iphone was unable to drop pin to current location using maps application .is their any configuration change with this ios 4.2.1 upgrade?

    Turn off your wifi and your location service, but keep your cellular on, You will be able to find your coordinates on the map but not so accurate, You will miss even the rotate on the X axis, The only key player here is your LOCATION SERVICE under GENERAL, the location service works in 2D way, It locates your position according to X & Y axis, For sure this is with the help of the satellite, I have find my iPhone app and it does not interfere with the map app or any navigation app i have, All these app actually uses the LOCATION SERVICE if it's enabled. You can go ahead and turn off your cellular and your wifi but keep your location service on, you will find that on the map your phone will rotate when ever you rotate your phone in a 360 degrees circle, but you will miss the exact names and coordinates of your position, Cellular data gives you that, Names and addresses of where you are and location services gives or tells you where on earth you are.

  • Map Control Problem

    Hello all,
    I'm working on a project where maps in windows 8 store app is involved. Here's what happens with me:
    on app start after the main page is loaded I add a map control. After that I get some data from a server using HTTPClient and put the retrieved data in a list. Then I project the list data on the map as markers.
    The thing that happens is that I'm setting the zoom level & the map center values when doing so but, the map doesn't zoom or center as needed. I think that this operation is interrupted resulting to this unwanted behavior. So, any idea ??
    Thanks in advance

    Hi Motasim,
    Which map control are you using, Bing map or some third party map controls? If you are using Bing maps I can help move to the correct forum for you otherwise you probably need ask at the map forum for a better support :)
    Thanks for your understanding,
    --James
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • N97 location function - ovi maps; google maps; fou...

    Hi All
    I've recently moved from the UK to Australia.  I have a new modem and n97 and new SIM - none of these have been in the UK.
    What I have brought from the UK is the wireless router.  I haven't used this for about 2 years (as I got a different internet service which came with it's own wireless modem).
    When I conntect my n97 via the wifi - any of the location based services (maps, apps etc) all think they are in the UK at my old old address.  When I use the 3G internet - the phone knows exactly where it is.  The problem seems to be somewhere between the n97 and the wireless.  Any idea how I fix this???
    Thanks in advance for your help.

    The possible cause is the router. WiFi positioning is based on identifying the MAC ID of the router, which tells where its supposed to be. The databases may have not yet been updated and your router's address is being identified as somewhere in UK. I dont know if you can manually update your router's location, but you can check in its settings page.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • How can i get my car to change the track when i am listening to the music on my phone through the line-in?

    how can i get my car to change the track when i am listening to the music on my phone through the line-in? is there a app i can download so it will recognize it? i have a vauxhal astra and the controls are on the steering wheel

    First question is how old is Astra and you are in UK ( well you must be to have a Vauxhall)
    Normally the Radio only has a line in socket  to allow sound
    You have two choices here either a simple cable with a 3.5mm Headphone plus at each end
    or a cable with the headphone plug to place in car's line in plug and a wide Apple socket to fit the base of your iPhone This allegedly gives better sound but  you have to control the iPhone for music selection
    The equipment you need to control the iPhone from the Steering Wheel controls ,which I suspect currently handles radio /Cd  tracks /stations ,is much more complicated it will have to be integrate with the Factory Fitted  radio
    and designed to manage the S/Wheel  controls and translate to the iPhone .
    Fitted into back of radio etc etc
    If car is a recent Vauxhall there may be a kit available from them .but will not be cheap
    Many imponderables you did not give much away in your OP

  • An error has occurred because a control with id '%spPlaceHolderMain%' could not be located or a different control is assigned to the same ID after postback.

    Hello All, When i try to do a filter on an entity and click filter button, i see the below error message being popped up. Can someone provide a solution to this ?
    "An error has occurred because a control with id '%spPlaceHolderMain%' could not be located or a different control is assigned to the same ID after postback. If the ID is not assigned, explicitly set the ID property of controls that raise postback events
    to avoid this error."
    Please let me know the process to set the ID explicitly.

    Can you try resetting the IIS?

  • Is there a need for internet on iphone while you wan to locate it when you lost your iphone?

    I lost my iphone and I am trying to locate my iphone using the Icloud-Find my iphone, but it shows offline, so I just wanna know if is there  a need for internet service on iphone or it works with the location service only?? Cz it shows offline, help plz

    Maybe the networks have different services, cause here in Afghanistan I had a ROSHAN network simcard in my iphone, it shows your current location on the map if the map is already downloaded in a limited area, but if the map is not downloaded it shows the current location in a blank page even when I turn off the 3G and cellular services.
    That’s what I was using here. Thank you any way.
    Have a good time.

Maybe you are looking for