Retaining original filename in FILE- SOAP- SOAP- FILE

We have faced a scenario where I have to retain original filename in File-> SOAP-> SOAP ->File. The issue is that we don't have any ESR objects and neither do we intend to create any. So its purely configuration to transfer file from one folder to another.
Any suggestion would be highly appreciated.
Thanks,
Swati

Hello Swati,
Even after trying the above steps suggested by Praveen, if you don't get the results use Dynamic Configurations module in the Receiver channel along with the above settings.
1) Make sure the above settings are done (given by Praveen)
2) Assign a new variable as the file name parameter under receiver channel configurations.
3) Assign the "message:interface_name" value to the variable under Variable Substitution
4)Under Module Tab do the following:
Let me know if you still face any further issue.
Regards,
Simran

Similar Messages

Retaining original filenames in Save For Web droplet

Automation from LR to PS is going groovy, but,
The output files are all being renamed by the 'save for web' dialogue box to the filename saved inside the action that the droplet points to..
So file #1 is saved ok,
File #2 renamed as file #1 and replaces/overwrites original file #1..
I have added a sequence 4 digit number to the file name in the droplet creation dialogue box but the final file rename happens after this in the final process of 'Save for Web' export..
This is what I want to do.. Ideally..
LR Raw file edited to taste,
Export as watermarked TIF to PS
Action a high pass filter,
Export through Save for Web @ 1200px long - 75% quality
Close TIF without saving.
Es possible?

Hi JJ,
Nope, I didn't change any names.. or do you mean I automatically/inadvertantly change the name when recording the 'save for web' step?
In your image above, mine looks similar but the filename is that of the file I need to have open in need to record an action..
In my case, using your example, all my exported files would be renamed 'webnamed.jpg'
and overwrite each export one by one...
What is it I'm not getting??? !!
How can you record an action without an open file, that the 'action record process' records THAT filename and makes it sticky in the action..
Sorry to come across as really blonde here but I'm just not getting it..
Here's what mine says..

LR 2 Retain Original Filename?

How does one save the original filename in the metadata so that it becomes a permanent metadata entry (is not lost if it deleted from the catalog).
I want to be able to look at whales.(jpeg, tiff, dng) and see that the original filename was IMG_0012.jpg or _MG_9494.cr2 or whatever. LR rename does create an original filename entry; however, that entry seems to get lost if the file is removed from the catalog. I need some easy way to be able to tie the current image back to the original file. It would be nice if the entry were also viewable using Bridge.
Thanks
Mike

> need some easy way to be able to tie the current image back to the original file. It would be nice if the entry were also viewable using Bridge.
If you send to PS via LR and keep the derivatives in their default Save location, the files should all be referenced and available in LR. If you delete or move originals, it defeats some of the workings of LR. So I am not clear how to help. Can you rephrase your end objective and say why originals get deleted?

Rename files and retain portions of the original filename

I posted a thread about this a while ago, but no solution was given:
http://discussions.info.apple.com/thread.jspa?threadID=2564646
The issue is this: I can't figure out how to rename imported files while also retaining part of the original filename. The images come off of the camera like this:
DSC_3497.nef
I need to do the following:
+- Retain the unique number that the image already has. I don't want to rename the files by date, location, lunar phase, or some other esoteric identifier. I think having a unique ID for each image (one that shows up in standard OS-level searches on both Mac and PC systems) is useful.+
+- Replace "DSC" with the camera model (D3X), since I use multiple cameras with different resolutions and also need to be able to search for images from a certain camera outside of Aperture (i.e. tags/keywords would not help).+
+- Add a digit prior to the four-digit string to indicate the true numeric sequence of the file. Since Nikon cameras reset the number sequence every 10,000 files, I want to indicate the true sequence number directly in the filename. This will also avoid filename overlaps. It also lets me know how many images I've shot with each camera.+
The intended final result would look like this:
D3X_63497.nef
Showing the 63,497th image taken with my D3X.
In Aperture's "File Naming" dialog, I don't see a way to split the existing filename in this way. It looks like I can only append or prepend a Custom Name to the Version/Master name. I don't see a way to split the existing filename at the underscore, for example, so that portions of the original filename can be selectively replaced.
This is not about finding a workable naming scheme for Aperture and then renaming all existing files. I spend time on the PC side for various things and also work with a number of people who don't use Aperture but need access to my image library. I also have hundreds of references to existing filenames in various print and web design projects, as well as my Flickr account with 3000+ photos.
Going back and updating all that stuff is not going to happen. But using a System Service to rename files after every import is also pretty tedious.
Any solutions that meet the three criteria outlined above would be greatly appreciated.

sempervirent,
You're asking for some pretty advanced file naming. Most people aren't going to need that sort of function, so I doubt there will be a hook into Aperture to do such a thing. I suggest using a shell script or Applescript along with EXIFTool to rename files before you import them into Aperture. http://www.sno.phy.queensu.ca/~phil/exiftool/
Retain the unique number that the image already has
If you're not afraid of the command line, it's easy enough to use a tool like awk or maybe perl to parse that sequence number from a well-formatted string like the picture name
Replace "DSC" with the camera model (D3X)
You can use EXIFTool to extract the camera model from the EXIF dat ain the photos
Add a digit prior to the four-digit string to indicate the true numeric sequence of the file.
Good luck with this one. You'll have to do a filename search through all of your previous files to find out what 10,000 you're on. It's possible, but you'd have to do some specialized coding in AppleScript or shell script.
nathan

Error handling in File - XI - SOAP scenario without BPM

Hello!
We have a File -> XI -> SOAP scenario without BPM. The problem is that if the Web Service sends back an error XI tries to reprocess the same message again and again instead of taking the next one.
We do not want set the retry interval to NULL because most error cases are temporary connection problems and then also those messages would not automatically be reprocessed any more.
We also have to use BE instead of EO, otherwise the Web Service will not return a response. But we need the response to be sure that the processing was successful. The message volume in this scenario is quite high and we do not want to use BPM only for the error handling.
I know that from SP19 some additional adapter modules are available for async - sync scenarios without BPM. I tried to configure it like described in File - RFC - File without a BPM - Possible from SP 19. but it did not solve the problem. Does anybody have any other ideas? Thanks.
Regards, Tanja

Hi Tanja,
>>>The volume is 3000 messages/day on business days and 700 messages/day during weekends but the traffic will increase in the future
I think, you should check that out. It is assumedly only 2 days work to build a scenario:
IDoc -> BP
BP <-> SOAP/HTTP
BP -> IDoc (Acknowledgement)
In the process you need a condition branch, where you decide success or not. You need 2 Interface Mappings for filling the ALEAUD.
Just send 1000 IDocs to the Test-XI and look to performance monitoring at Runtime Workbench, to find out, how many message will be processed in one hour. Assumedly 3000 and more per day should be possible. The advantage would be to reduce number of systems (no file system) and messages (better monitoring) and using the standard (better maintenance).
>>>So you are suggesting I should use HTTP adapter and then add the SOAP header manually in a mapping?
Yes, build the SOAP envelop during the mapping. Most easy is to use XSL or, if your mapping is ready, an additionsal XSL. You can put the error into the Acknowledgement to see it in ERP transaction WE02.
Filling of ALEAUD fields:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
I ve done such a scenario several times. That works without any problems.
Regards,
Udo

Soap to file

Hi All,
I would like to work on Soap to File scenario(model).
Soap message is availbale in XML file.that i need to send as file to target system.
I'm unable to find any file picking option in soap adapter.
If i'm doing wrong approach could any one suggests me to do this scenario.
Thanks and regards,
venu.

Hi Venu,
I think i will give you some more information about SOAP adapters,So Please go through the link below and follow the steps mentioned in it while defining the web service.Then you will get to know the actual use of a SOAP adapter.
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/31/daa0404dd52b54e10000000a1550b0/content.htm">Defining Web Services</a>
Sending a Simple SOAP envelope to XI via HTTP using ASP
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1442 [original link is broken]
More links for SOAP Adapter:
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
http://help.sap.com/saphelp_nw04/helpdata/en/9f/fdca3f01f33e1ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
You can create SOAP Request from WSDL using the following tool.
http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
You've to expose your outbound message interface as a WSDL which can be used by say EP.
Also go thru the following threads
Re: WebService
Re: SOAP Client for Synchronous Scenario
Re: How to test a webservice as a standalone?
Regards,
abhy

SOAP to FILE using BPM to catch exception and save error into the table

Hi All
My scenario SOAP to FILE using BPB is working fine but now I have a requirement to catch an exception if something wrong happened on a runtime and save it into the tracking table, is that possible, if it is please point me to the similar step by step scenario.
Thanks in advince,
Yonela

Yonela:
As your original requirement is to save the eorr data into your database table, however, you was mis-leaded to alerting field.
You are using BPM now, then that is the reason that I suggested to use excpetion branch.
It does not matter SOAP to File seneario, it does not have to be SAP - RFC scenario, your BPM willl interact with database system.
First you have block which include all the steps that possible generate exception: like Transformation step, and your final Aync send step (which will send data to file).
Secondly, define a exception handler for that block.
3. Modify each steps that posssible generate exception: e.g. transformation step, send step, add exception handler to them.
4. Create exception branch in side the block
5. Add another send step inside your exception branch, which will call RFC, RFC will write data to your table.
6. If you want, you can add a control step in exception branch to trigger a alert, or terminate current process.
At run time, any steps that trigger exeption,will cause your exception branch executed, and RFC will be called to insert data into your database table.
Regards
Liang

File to SOAP,error in sender file adapter

Hi,
I am doing a scenario FILE to SOAP where In file adapter I am using Quality od service as Exactly once in order.I am getting the below error.It works fine when I use QOS=Exactly once.Not sure why,can you guys please help me.Can we really use QOS-EOIO for sender file adapter,where exacly do we use it.
Thanks
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Edited by: guest xi on Apr 16, 2008 11:55 AM

Hi,
Thanks for your replies guys.I diid give the queue name ,I dont know what is causing the error.Now even QOS=EO which was working fine before is throwing an error.I am using the same file name for both
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Error while testing File-PI-SOAP interface

Dear All,
We are working on File-PI-SOAP interface in which we have exposed a functional module from ECC server as receiver webservice. When we are testing the the interface we are getting following error :
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/PLAIN; HTTP 407 Proxy Authentication Required.
In the receiver SOAP communication channel we have provided the required ECC login & proxy authentication credentials and also we are able to open the URL from PI server. Kindly let us know what more settings are required o make this interface running.
Regards,
NJ

Hi,
This is a synchronous interface and I want to send the output from webservice as a file to third party system.
We are just working on a demo interface, so we have created a webservice of a function module of ECC and also our interface is File-PI-SOAP.
We have also given the login credentials for proxy authentication but still we are getting the error the
SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/PLAIN; HTTP 407 Proxy Authentication Required
Kindly let us know, how can we resolve this error.
Regards,
NJ

Can I get back the original filename even though the file is missing

I imported 900 RAW images from my desktop into Lightroom, edited them, renamed the filename, and exported them into JPGs. Since I no longer needed the RAW images on my desktop I moved them over to an external hard drive. So now the images are still visible in my Lightroom catalog, but there is no photo to back it up since I moved the original files to the external hard drive. After realizing that I exported the images at 150 dpi instead of 300 dpi I need to re-export the images from lightroon at the proper resolution. But since I moved the originals to the external hard drive there is no photo to back it up in lightroom anymore. So I went to locate the files by clicking on the "?" but since I renamed the file when I exported them, the original filename on the external hard drive is now different from the filename in the catalog. Is the only solution to locate the file one by one? Is there any way I can do them all at once even though the original filename is different from the filename in my lightoom catalog? The original filename is still listed in the metadata, but since the originals are missing it can't change it back. Please help!

It sounds as though you moved the files and renamed them outside of Lightroom. Not a good idea. I'm not really going to answer the question about retrieving the files. But if your only concern is the resolution then I wouldn't concern myself about changing the images. That resolution setting really has no impact or effect of any kind on your images. It doesn't change the size, or the quality at all. If you have an image that is 2000x3000 pixels (for instance) it will be that same size regardless of what the resolution setting is. The only real value that setting has is to give another user an indication of the intent for the image. When you look at an image in Photoshop and look at the image size feature, Photoshop will tell you the dimensions of the image at that resolution, but that doesn't change anything about the image.

How many Receiver determination in File to SOAP scenario

Hi,
I am trying a File -SOAP-File scenario, where file will be send to PI asynchronous. BPM is configured to receive the file and
call the web services and get the response (Synchronous call) .After that BPM send the file asynchronous to File via FTP .
It is basically asynchronous/ Synchronous bridge scenario.
To do this I have have configured the BPM & created 3 Communication channel . 1 sender (File) & 2 receivers ( SOAP & File)
But i got confused in Receiver determination. How many Receiver determinations do we require in this step? 2 or 3. If 3 how they will look like. I believe Interface determination is same as Receiver determination. I am suing Business System to send & recv the file.
Points will be rewarded for suitable answer.
Thanks

hi,
You require 3 receiver determinations.
one from File to BPM(XI)..
another from BPM to SOAP and other from SOAP to FILE.
This is exactly the same scenario.
RFC Scenario using BPM --Starter Kit
Thanks,
Vijaya

Issue in File to SOAP as Attachment

Hi,
I have scenario from File to SOAP.
I ma to send two files one file as content of SOAP request and other one as file attachment. The problem is i cannot send message both file content and file attachment.
Because when i select the "keep attachment" in the SOAP adapter both content and attachment become attachment, but if i didn't tick, only content is display by the recipient without the attachment.
How can i configure SOAP adapter so the recipient can receive both content file and attachment file.
Solution will be rewarded
Thanks
Jaideep Baid

hi gaurav,
   actually my SOAP payload will be a file only but I wnat to send till a perticular node as a SOAP payload and rest part as an attachment.
like
message----Root node
      field 1
      field 2
      field 3
         subfield 1
         subfield 2
         subfield 3
         subfield 4
SO i want till field2 it should go as payload and from field 3 i should go as attachment.
OR i can make two files of different name.
file1's content
   field 1
   field 2
file2's content
    field 3
         subfield 1
         subfield 2
         subfield 3
         subfield 4
Now in this case file 1 should go as SOAP payload and File2 as attachment.
So that In XI i can see two different file one named as mainDocument and other one name as Attachment.
Plzz suggest any solution
Thanks
Jaideep jain

File --- to--- Soap(web service)

Hi all,
i am doing File ->to->Soap(web service) scenario.
my requiremenmt would be
1.Can we able to re-trigger failed & successful messages
2.Can we we able send the consolidated XML for the day irrespective of individual xml's
3.we able to send the same XML data of the same client to multiple url's
4.the compression/encryption of an XML is possible or not
ccould you provide me the solutions for these steps.
Thanks in advance,
AVR

>
AVReddi wrote:
> Hi all,
> i am doing File ->to->Soap(web service) scenario.
>
> my requiremenmt would be
> 1.Can we able to re-trigger failed & successful messages
if the flow is asyc, you can always retrigger failed messages. Also successful messages can be retriggered manually using the test tab in RWB
> 2.Can we we able send the consolidated XML for the day irrespective of individual xml's
This will be a collect kind of scenario. You will use a BPM to start collecting all the files and then trigger a message based on you collect criteria
> 3.we able to send the same XML data of the same client to multiple url's
yes. use multiple receivers or multiple inbound interfaces in your interface determination
> 4.the compression/encryption of an XML is possible or not
>
> ccould you provide me the solutions for these steps.
>
> Thanks in advance,
> AVR
use HTTPS in your SOAP adapter i.e certificates

FILE to SOAP synchronous scenario - config of SOAP channel

Hi All,
I have a scenario where I want PI to pull some files from 3rd party application.
Adapters to be used: SOAP receiver, FILE adapters.
I am aware of the use of Request/Response beans in File sender channel and the File receiver channel to dump the received files in a particular location.
I need help with the configuration of the SOAP channel.
The files to be pulled will be Encrypted.
Summary:
File sender(RequestResponse & ResponseOneWay Beans) , File receiver( to receive the files), SOAP receiver.
Need help with the config of SOAP.
Kindly let me know your views.
Thanks,
Pratibha.

Hi,
Let me put it in detail steps:
In forward flow we will be sending an IDoc. It will be processed and later an Acknowledgement file will be generated.
Now, we want to PULL this Ack file. If the other party had to push the Ack file, the scenario would have been simple.
But, we want to poll for this file and then pull it.
So, we would have something like this:
1. FILE SENDER sends a sample file.
2. We will be applying the beans in file sender to make it a synchronous scenario. So, the Ack file will be received at the location mentioned in the corresponding FILE RECEIVER adapter.
3. We have a SOAP RECEIVER which should send the ACK file in response.
I have configured the same scenario where the RECEIVER was HTTP adapter. The 3rd party had provided us the URL and ENT-APRF value. When I used to send the sample file via FILE SENDER to this HTTP receiver, I was able to retrieve the ACK file via the FILE RECEIVER.
Now, I wish to configure the same using RECEIVER SOAP adapter.
I need to know about the config at SOAP end i.e. how and where the ACK file will be available at the SOAP end for the FILE sender to pull the file.
Ack files will be encrypted..
Any views/suggestions will be of great help.
Thanks,
Pratibha.

File To SOAP

Hi,
I am trying out a scenario from file<>BPM<>SOAP.
In the Call Adapter step I am getting the following error message:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message is not used by any processes</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The Message is successfully reaching BPM but then the error occurs.
Please help me in this regards.
Thanks,
Abhishek.

Hi,
check these
1. Go to Transaction: SXI_CACHE and check the return code for your intergration process, it must be 0.
Might solve your issue
2. In MONI click on PE (you will find this when you scroll towards right). Now navigate like this Goto ---> Graphical workflow log. Check in which step there is a error (it will be in red colour lines).
3.Can u check whether the interface used in Sender agreement is the same as the interface used in Receiver Determination, whose receiver is BPM?
4.Check the receiver determination for file to BPM. The file message that enters the BPM i think is not able to find the receiver.
Try one more things. In your BPM, try a f7 and see if there is any syntax errors.
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

Retaining original filename in FILE- SOAP- SOAP- FILE

Similar Messages

Maybe you are looking for