Retrieve Email Group Status via Bulk API Exports

What methods are needed in order to retrieve email group status and subscription date for contacts (alongside contact information) via Bulk API 2.0?
Thank you,
SR.

After further testing you can subscribe two groups but the log message will be misleading. I created a bulk import with 10 contacts to be subscribed to two email groups. The log message indicated that 20 contacts had been subscribed to the first email group. Checking the contacts via the web interface showed that they were properly subscribed to both groups. The count was correct, just the text of the message was overly specific.

Similar Messages

Bulk API exports with 5m records

Hi,
I've just started using the bulk API. For our activity exports, we have >5 million records so when I run it (unfiltered apart from activity type) the sync stops at 5 million.
I am looking to get all of the records out, so I was wondering if anyone knew how best to do this.
'Offset' seems to work with the GETs but not with POSTing the export definition.
I have tried saying activity id > (the highest activity id from the first 5 million records returned) but this seems to leave gaps.
Likewise date > (the highest date in the first 5 mil).
It seems as though activity id & date only roughly tie up
Any advice appreciated!
Cheers
Stephen

Hi Wouter,
Have you considered making a standard contact filter that does this, and simply referencing that in your export definition? Admittedly, it's either going to be a manual process from the UI, or extra code in your app to automate the creation of a shared filter via REST API.
For reference, Bulk API 2.0 can do this via:
"filter": "'{{Contact.Field(C_FirstName)}}' = ''"
Regards,
Bojan

SDK-DI - Inventory status via DI-API

It is possible to via the DI-API to add data to the Inventory Status (StockTaking) but it is not possible to execute the status.

This is indeed, a problem area, I too need reconciliation via the DI-API. The only solution (work-around) I have at the moment is to put the reconciliation entries on to a payment with an on account amount of £0.01 then write another journal for £-0.01,
This still leaves the two 0.01 transactions to be reconciled, but we are hoping that as these are the same value and can be created with the same references that automatic reconciliation can then be run against the BP and sort these out.
This is quite messy but the only solution I can think of.. Anyone else have any ideas???
Matthew Brown (B1 Systems)

How do I read & update email group subscription status for a specific contact via api?

Looking at Eloqua's api documentation, I can find out how to update contacts, and even the global subscription flag, however we want to build a page on our custom website whcih allows users to opt in and out of specific email groups (as can be done manually from the contact page / preferences tab)
I cant find the appropriate api documentation for this - I found a page for contacts:
REST API - Contact Fields
and a page for email group:
REST API - Email Groups
any idea how can I find and udpate the object linking the two ?!?

Via REST API, the bare bones call is:
PUT /API/REST/2.0/data/contact/{contactid}/email/group/{groupid}/subscription
"type": "ContactEmailSubscription",
"contactId": "3174",
"emailGroup": {
"type": "EmailGroup",
"id": "15",
"depth": "minimal",
"name": "Test Email Group"
"isSubscribed": "false"
Where isSubscribed can be toggled to true. This is the same call made by the UI when you open the contact record, move to the preferences tab and right click to subscribe or unsubscribe on an email group:
The list of email groups and their ids can be obtained via GET /assets/email/groups. I recommend adding ?depth=minimal to avoid retrieving unnecessary configuration information.
Best regards,
Bojan

Retrieve contact list via the API not with the last updated date but created date?

I can connect via the API and retrieve a list of contacts but it seems that the only paramater i can pass is to search since the last Update Date.
Is it possible to search on the Created date and to have a date range as well?
I found the xml result is slow to come as it gives all entries since the "lastUpdateDate" entered.

A change in score does not cause the Date Modified field to change on the contact record. This field only changes when some data in one of the fields has changed.
However, some of the confusion can come from the fact that lead scores have a Profile and Engagement portion. So if you have certain fields on the profile section being modified, that would cause a rescore at the same time. Engagement criteria such as form submits often cause the contact record to be modified while website visits and email clicks/opens do not.
Hopefully this helps clarify,
Bojan

How to determine host status in a task via python api

Hello all,
using the python api I am having some issues trying to determine the status of a host within a task. For example I have a job, with one task and 10 hosts associated with that task. Eight hosts finish the task, 2 fail. However via the api I can only seem to determine the status of the job and the task. What I want is to be able to generate a report that basically matches what you see via the gui (ie 8 hosts ok, 2 hosts failed). The data structure OnStageTaskData gives me a status and a list of hosts, but not a status for each host. (Note I am not using any of the depricated functions/data structures). Currently my code looks like (minus the api init, etc)...
# list all the jobs for last week
joblist = api.GetJobs()
for job in joblist:
# if the job occured in the last week
if job.c_time > reportstarttime:
print "\nJob name %s Time %s " %(job.name, time.ctime(job.c_time))
try:
jobdetails = api.GetOnStageJob(job.id)
except COsApiJobNotFoundException:
print "Can't find job %s details" %job.name
continue
for tasks in jobdetails.job_data.tasks:
for hostid in tasks.task_data.target:
try:
hostinfo = api.GetHostGroup(hostid)
except OsApiHostNotFoundException:
print "Can't find host details %s" %tasks.task_data.name
print "Hostname %s Status %s" %(hostinfo.name, tasks.status)
which generates output like...
Job name chg233146-sol9 Time Sun Jan 13 10:31:42 2008
Hostname tacnomsrv02 Status Failed
Hostname tacpthsrv01 Status Failed
anyone have another way to doing this or suggestions? Or is this kind of info not available via the api? Thank you.

Hi ConnectSolutions,
As you correctly pointed out, there is some bug in our code
that keeps the room active and you dont receive any events or
notification if you are entering as guest and waiting and the host
arrives. Also, since you havent entered yet i.e your role is still
5 i.e. UserRoles.LOBBY , you can't access any of the UserManager's
collections and will get a length of 0 always. We will be fixing
this with priority .
But you can get around the problem as of now, by having a
small shared model of yours ( any collectionNode or sharedModel
will do) where you create a node and publish a message on it from
the Owner's side whenever the owner/host enters to notify everyone
that he has entered. Just remember to set the accessmodel of
NodeConfiguration of node on which you are publishing to LOBBY ie.
role = 5 , and make the publishModel = 100 so that only owners can
publish on this node. In this way , any users waiting will be
receiving this message and will know the host has arrived. If you
can't get this sharedModel concept to work, let me know. I will try
to run on my side.
And as of our side regarding actual fix, we will fix this use
case and put in the next drop of SDK and also update in forum about
it.
On the host side though, he is always notified when he enters
if there are pending users knocking to enter. See the KnockingQueue
example in case you want to explore that.
Thanks
Hironmay Basu

Unable to start process via GP API in which group is exposed as input

Hi,
     I am not been able to start process using GP API for the particular senario.
I created Process at design time.
In this process I mapped parameters to a group and exposed this group, So that input is required for initiating the process.
Now I want to initiate this process via GP API.
I got sucess in starting processes which takes parameters as inputs or which does not need any inputs, but i was not been able to start process where group is exposed.
it's giving me GP INVOCATION Exception.
Please Help ASAP
Regards,
Pratik

Pratik,
I try to simulate with scenario described by you and I got success with my test.
Follow my java code:
     public boolean initiateProcessSDN () {
          boolean ret = false;
          try {
               IUser user = UMFactory.getUserFactory().getUserByLogonID("uces");
               IGPUserContext userContext = GPContextFactory.getContextManager().createUserContext(user);
               IGPProcess processTemplate
                    = GPProcessFactory.getDesigntimeManager().getActiveTemplate(
                              "8DC0B411957D11DDB7910017F2EBE4A5", userContext);
               IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
               IGPStructure params     = GPStructureFactory.getStructure(processTemplate.getInputParameters());
               params.setAttributeValue("NameGroup", "Pedro");
               params.setAttributeValue("AddressGroup", "XPTO");
               IGPProcessRoleInstanceList roles = rtm.createProcessRoleInstanceList();
               IGPProcessInstance prInstance
                    = rtm.startProcess(     processTemplate,
                                        "Test 1",
                                        "Test 2",
                                        user,
                                        roles,
                                        params,
                                        user);
               ret = true;
               } catch (Exception ex) {
                    ret = false;
          return ret;
Print screen about my GP design:
Callable Object with 4 parameters
http://img530.imageshack.us/img530/16/sdngpgroup001bt5.jpg
Action grouping CO parameters into 2 groups
http://img147.imageshack.us/img147/2006/sdngpgroup002xy3.jpg
Process reflecting these groups as input parameters
http://img147.imageshack.us/img147/9184/sdngpgroup003pp0.jpg
Process started by java code above
http://img530.imageshack.us/img530/8833/sdngpgroup004no4.jpg
Best Regards,
Pedro Nunes

How to filter CDO export on Date Modified using Bulk API

I'm using the Bulk API 1.0 and E10, and I'm trying to export custom data object (aka CDO, Data Card) records that have been modified recently. I can get it to work using another date field, but I can't figure out what the field name or ID is for the modified date. I've tried C_DateModified, but that returned an generic error message. I tried to query the custom object to get all fields, but that just returns the custom fields. Any ideas?
By the way, the filter I'm using is something like this: filter":{"filterRule":"valueGreaterThanOrEqualToComparisonValue","value":"{{CustomObject[53].Field[???]}}","comparisonValue":"2014-02-01 00:00:00"}
Thanks!

Hello,
I was trying all the names in this post and kept getting the
constraint: "Must be a reference to an existing object."
error message. What exactly is the syntax to filter by modified date for customObjects in BulkAPI 2.0? I'm using E10
I tried both
"filter":"'{{CustomObject[5].Field(Date_Modified1)}}' >= '2014-09-20’"}
and
"filter":{"filterRule":"valueGreaterThanOrEqualToComparisonValue","value":"{{CustomObject[5].Field(Date_Modified1)}}","comparisonValue":"2014-09-01 00:00:00"}

How do I create a Campaign Entry via the Bulk API

I am importing contacts into Eloqua via an Audience App and the Bulk API. When if I look in the Campaign Entry Report, those contacts don't appear. If I examine a contact that does appear in the report, I see that it has Campaign Entry and Campaign Membership under Recent Activity. What do I need to do to make that happen for the contacts I'm importing via the Bulk API? I've looked through the API documentation but haven't found what I need.

In the Style editor you only see the CSS files used by the website in the currently selected tab.
You won't see any references to the userContent.css file via the built-in Inspector.
Only the DOM Inspector show such CSS rules if you inspect an element that have a matching selector.
You do not need to import the userContent.css file as Firefox does this automatically each time you start Firefox and the rules that apply will automatically be added.
*DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/
*https://developer.mozilla.org/DOM_Inspector
*https://developer.mozilla.org/Introduction_to_DOM_Inspector

Seting page group id via api

Does anybody know how to set the page group for a page via the API. I've found an update_page proc in the wwv_flow_api package but it doesn't seem to include a parameter for the page group/group id. I'm using Apex 3.2. Thanks for any help.

Thanks that helpful in some ways, but I want to get the page_id. For example, if I create a page with the name PG_DEPT and the display name "Department Page". I need to know how to get the current PG_DEPT name from the API. Also, I will like to get the current URL from the page (http://portal/pls/portal/page=123).

Bulk API V2.0 Data extract support for additional objects (Campaign,Email,Form,FormData,LandingPage)?

allison.moore
Any plans for adding following objects under Bulk API V2.0 for data extraction from Eloqua. Extracting the data using the REST API for these objects makes it complicated.

Thanks for quick response. Extracting these objects using REST API in depth=Complete poses lots of complication from the code perspective since these object(s) contains multiple nested or embedded objects within it. is there any guideline on how to extract these objects using REST so that we can get all the data which is required for analysis/reporting.

How to get data of more than 100 fields by Bulk API V2.0?

Hi all,
I'm trying to get data from Eloqua by Bulk APIs because of big data.
But my Contact has 186 fields (more than the Bulk export limitation 100). I think I need to get all data by 2 exports.
How could I match 2 parts of a row and join them together?
I'm afraid that any edit of data between the 2 syncs for the 2 exports would make the order different.
E.G.:
1. any record is deleted or edited(make it not matching the filter) after getting data of the first part and before getting the second part, then every one behind it would move up in the second part result.
2. data of some fields (included in both parts) are changed between the 2 syncs, then values of the second part are newest but values of the first part are old.
Any suggestions would be expected.
Thanks,
Biao

bhuang -
I don't know that you're ever going to get around the fact that things will change in your database while you're syncing the data. You're going to have to have some way to create exceptions on the sync side.
If I was pushing data from Eloqua to another database and had to deal with the problem of matches changing while I was syncing, I'd create a few extra columns in my database to keep track of sync status for that record. Or create another small table to track the data mapping. Here's how I'd do it.
I'd have two extra columns: 'mapped fields 1' and 'mapped fields 2'. They'd both be datetime fields.
I would only do one set of syncs at a time. First, sync every record for the email + 99 fields. Do the entire list. For each batch, set the datetime of the batch in 'mapped fields 1' column.
I'd then sync all records for email + other 86 fields. Do the entire list again. For this batch, set the datetime of each batch in their 'mapped fields 2' column to now().
For any records that had only 'mapped fields 1' filled, but 'mapped fields 2' was empty, I'd re-run the second Eloqua API query using the email as the lookup value. If no results were returned, I'd delete the row. Otherwise, update and set 'mapped fields 2' to now
For any records that had only 'mapped fields 2', I'd re-run the emails against the first Eloqua API query, fill in the missing data, and set 'mapped fields 1' to the current datetime. If the record wasn't returned, delete the row as it's probably not in the search any longer.
Finally, set 'mapped fields 1' and 'mapped fields 2' to empty for all records, since you know the data is in sync. This will let you use the same logic above on your next sync.
Does that make sense? It's not super clean, but it'll get the job done, unless your syncs are taking a ridiculous amount of time and your data changes super often.

Bulk API 2.0 Sync Actions

I'm having difficulty using the add contact to list and subscribe contact to email group sync actions in a single import.
The documentation states that multiple actions are allowed and the request is accepted, but the email group subscription isn't being set.
The contact is only being added to the contact list.
Here's my import definition:
"name": "ConnectWise Import",
"identifierFieldName": "C_EmailAddress",
"fields": {
    "C_EmailAddress": "{{Contact.Field(C_EmailAddress)}}",
    "C_FirstName": "{{Contact.Field(C_FirstName)}}"
"isSyncTriggeredOnImport": true,
"updateRule": "ifNewIsNotNull",
"uri": null,
"syncActions": [
      "destination": "{{ContactList[675]}}",
      "action": "add",
      "status": null
      "destination": "{{EmailGroup[81]}}",
      "action": "setStatus",
      "status": "subscribed"
When I remove the add to contact list action the subscribe to email group action works.
Am I doing something wrong?

After further testing you can subscribe two groups but the log message will be misleading. I created a bulk import with 10 contacts to be subscribed to two email groups. The log message indicated that 20 contacts had been subscribed to the first email group. Checking the contacts via the web interface showed that they were properly subscribed to both groups. The count was correct, just the text of the message was overly specific.

Can send but not retrieve emails using Thunderbird and Windows 8.1

Hi, I am not able to get Thunderbird to retrieve emails on a new laptop.
Last week I purchased a new laptop due to an imminent hard disk failure on my old laptop. I will call them "Old" and "New" laptops. (Old laptop is still working for the moment...)
The Old laptop is nearly 3 years old, and I have been using Thunderbird on it since new without any problems.
I have downloaded and installed Thunderbird on the New laptop, and can not get it to retrieve emails.
As the Old laptop is still working (at the moment), I am able to directly visually compare and check settings on both computers.
THE PROBLEM
Using Thunderbird on the New laptop, I am able to send emails, I can see all my old emails restored from the Old laptop using Mozbackup, but clicking Get Mail on the New laptop does not retrieve new
emails.
When I click Get Mail, the status message in the bottom left corner says "connected to .....<ISP>..." but does not actually get the emails. However, the Old laptop is still able to get emails as it always has.
My ISP is a large Australian telco that I have used for many years and I have not changed anything with my account. The ISP is POP3.
WHAT HAVE I TRIED
I deleted the email account created by restoring from Mozbackup, and attempted using the Thunderbird new account wizard, however Thunderbird did not recognise my ISP and would not create the account - even though it is working perfectly at the same time on the Old laptop.
All Firewalls I can find have been configured to allow Thunderbird, with the same configuration settings on both machines.
How do I know I can send but not Get emails from Thunderbird on the New laptop?
I have sent test emails to myself from the New laptop. Thunderbird sends successfully, I am able to preview the test emails via Mailwasher on the New laptop, and can read, reply, etc, to the emails if I log into my ISP webmail service. However I can NOT get Thunderbird to retrieve and download these emails on the New laptop. If I go to the Old laptop, Thunderbird works perfectly, retrieves and downloads all new emails, including these test emails.
I am now at the point where I do not know what else to try and would appreciate any suggestions.....
I have spent many hours over the last 3 days surfing the net, forums, Mozilla Support, etc, and tried everything suggested, without success. The only thing I have NOT tried is starting windows in Safe mode (as per some suggestions), as it is not a viable long term solution.
OTHER INFO
Computer Details;-
"Old" laptop;-
Windows 7 Home Premium - continuously updated with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed). Up to date.
MailwasherPro 2012 (subscription and licensed). Up to date.
Thunderbird 24.5.0 working perfectly. Up to date.
"New" laptop;-
Windows 8.1 - up to date with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed) - downloaded and installed. Up to date.
MailwasherPro 2012 (subscription and licensed) - downloaded and installed. Up to date.
Thunderbird 24.5.0 - downloaded and installed.
Note: I 'downloaded and installed' the Windows 8.1 version of these programs to avoid any potential compatibility problems restoring or copying from a Windows 7 backup version of the programs.
1) New laptop came with pre-installed with McAfee - which has been Uninstalled due to running Bitdefender (Windows searches for 'McAfee' return nothing found suggesting the Uninstall was successful).
2) Thunderbird has been added to both Bitdefender and Windows 8.1 firewalls on the New laptop.
3) Bitdefender and Windows security settings are identical on both laptops - as near as I can determine, I may be missing something - but have checked all settings 3 times by doing a side-by-side visual comparison.
4) Thunderbird settings are also identical and I am using the same email address and ISP that I have been using for many years.
5) I migrated Thunderbird settings, accounts and emails from the Old laptop to the New laptop using Mozbackup, then visually checked and compared all settings in Thunderbird between the two machines.
6) For info, I have used Mailwasher for many years as a simple way to preview and wash mail before running email programs such as Thunderbird - might be overkill, but I have also never had a virus or malware problem, so will keep doing this.
7) I have Uninstalled and re-installed Thunderbird on the New laptop twice, and done the same with Bitdefender once.
8) Any config changes I try on the New laptop, I either restart Thunderbird and / or restart the New laptop, or both.
9) I have not created a Windows 8.1 account and am not using SkyDrive.
10) Only other software I have installed on the New laptop is Google Chrome, Office Home 2013 and iTunes - all are working.
Thanks in advance....

Well there is not much left. If telnet works then the path is clear and there is no hardware firewall blocking ports.
All that is left is software, so try windows safe mode with networking. A very handy way to eliminate software. it also actually disables most anti virus resident features and is preferred here because anti virus/security programs do not always disable or turn off when they say they have.
You might also try the McAfee removal tool. https://community.mcafee.com/thread/52788 I notice the rep said yes to both, they did not say not required.
Finally you could try creating a new profile, and see if it works just to exclude corruption of your existing profile. ( I doubt it but I am at the anything goes point)
Just as an aside, I have never had an email borne nasty and I for many years never even had an email virus scanner. So yes I think your a bit over cautious with mailwasher, if that is what your using it for. Thunderbird does not support scripting languages or flash, or most plugins in the email sandbox. The result is getting a virus from a mail in Thunderbird is really only possible, for all practical purposes, if you open that password protected zip from the young Russian woman and that is what the anti virus should be blocking anyway when the temp file is written.

How to get activity data by Bulk APIs v2.0?

Hi all,
I have completed to get Account data by Bulk APIs v2.0. (create an export for Account and then create a Sync for this export)
But when trying to use the integration to work for Activity data, I always get Error status of Sync.
So, could you please show me any suggestions for this issue?
Is there any option different between exports of Account and Activity?
Thanks,
Biao
PS: I find an example to request activity data:
POST https://<host>.eloqua.com/api/bulk/2.0/activities/exports
"name":"Example Activity Export",
"fields":{
"ActivityId":"{{Activity.Id}}",
"AssetName":"{{Activity.Asset.Name}}",
"ActivityType":"{{Activity.Type}}",
"Id":"{{Activity.Id}}",
"ActivityDate":"{{Activity.CreatedAt}}",
"EmailAddress":"{{Activity.Field(EmailAddress)}}",
"ContactId":"{{Activity.Contact.Id}}",
"VisitorId":"{{Activity.Visitor.Id}}",
"AssetType":"{{Activity.Asset.Type}}",
"AssetId":"{{Activity.Asset.Id}}",
"RawData":"{{Activity.Field(RawData)}}"
"filter":"’{{Activity.Type}}’=’FormSubmit’"
I get error status of Sync for this export. But when I remove the 'Id' and 'RawData' fields, I get success.
I guess that there are some roles of the field settings, e.g. one statement should not appear more than once, and so on.
So, where could I find the roles? Or is there an API could return the valid field list?
Thank you very much.

Hi Biao,
I am able to pull the data for Activity Export for Type Form Submit.
I am adding details below :
1) Create Activity Export Structure
URL : https://www02.secure.eloqua.com/API/Bulk/2.0/activities/exports
Input JSON : {"name":"Bulk Activity Export","dataRetentionDuration":"PT1H","fields":{"activityId":"{{Activity.Id}}","assetId":"{{Activity.Asset.Id}}","activityType":"{{Activity.Type}}","activityDate":"{{Activity.CreatedAt}}","contactId":"{{Activity.Contact.Id}}","visitorId":"{{Activity.Visitor.Id}}","visitorExternalId":"{{Activity.Visitor.ExternalId}}","assetType":"{{Activity.Asset.Type}}","assetName":"{{Activity.Asset.Name}}","rawData":"{{Activity.Field(RawData)}}"},"filter":"'{{Activity.Type}}'='FormSubmit' and '{{Activity.CreatedAt}}'>='2013-06-01' and '{{Activity.CreatedAt}}'<='2013-06-30'"}
Status Code : 201
Output JSON : {"name":"Bulk Activity Export","fields":{"activityId":"{{Activity.Id}}","assetId":"{{Activity.Asset.Id}}","activityType":"{{Activity.Type}}","activityDate":"{{Activity.CreatedAt}}","contactId":"{{Activity.Contact.Id}}","visitorId":"{{Activity.Visitor.Id}}","visitorExternalId":"{{Activity.Visitor.ExternalId}}","assetType":"{{Activity.Asset.Type}}","assetName":"{{Activity.Asset.Name}}","rawData":"{{Activity.Field(RawData)}}"},"filter":"'{{Activity.Type}}'='FormSubmit' and '{{Activity.CreatedAt}}'>='2013-06-01' and '{{Activity.CreatedAt}}'<='2013-06-30'","dataRetentionDuration":"PT1H","uri":"/activities/exports/74","createdBy":"CXDELQ.API","createdAt":"2014-11-03T09:40:00.9397930Z","updatedBy":"CXDELQ.API","updatedAt":"2014-11-03T09:40:00.9397930Z"}
2) Create Sync with status pending
URL : https://www02.secure.eloqua.com/API/Bulk/2.0/syncs
Input JSON : {"syncedInstanceUri":"/activities/exports/74","status":"pending"}
Status Code : 201
Output JSON : {"syncedInstanceUri":"/activities/exports/74","status":"pending","createdAt":"2014-11-03T09:41:18.2503138Z","createdBy":"CXDELQ.API","uri":"/syncs/90640"}
3) Get sync Result
URL : https://www02.secure.eloqua.com/API/Bulk/2.0/syncs/90640
Status Code : 200
Output JSON : {"syncedInstanceUri":"/activities/exports/74","syncStartedAt":"2014-11-03T09:41:20.6670000Z","syncEndedAt":"2014-11-03T09:41:23.1970000Z","status":"success","createdAt":"2014-11-03T09:41:18.1670000Z","createdBy":"CXDELQ.API","uri":"/syncs/90640"}
4) Get the data from API
URL : https://www02.secure.eloqua.com/API/Bulk/2.0/activities/exports/74/data?limit=1000&offset=0&count=1&depth=complete
Output JSON : "Output is high voulme, am not attaching here".
Please let me know is this will help you to reolve the issue.
Thanks,
Deepak Chincholi

Retrieve Email Group Status via Bulk API Exports

Similar Messages

Maybe you are looking for