Retrieve event and event parameter in event based background job

Hi,
I think it must be possible but I cannot find documentation of it:
When a batchjob is triggered via an event (defined in SM62) how can I retrieve the event and event parameter from within the triggered job itself. We want to use the event parameter to trigger other batchjobs, but first we must be able to retrieve them...
Thanks
Tom

Standard SAP triggers can be found in TCODE SM64, Background Processing events.

Similar Messages

I accidentally deleted a calendar on my iPhone 4. How do I retrieve it and all of the events that were in it?

I was recently adding my Google calendar to my calendars on my iPhone 4. After I synched it, something happened where all of my Yahoo contacts disappeared. We were able to retrieve the contacts after going into Settings and setting up a new account under Carddav.Address.Yahoo. My contacts all reappeared! I then noticed that all of my calendar events that were in there before Google was synched were gone. I don't know how to find those events and/or that calendar and retrieve it. I have iTunes and iCloud, but I don't see the events on there anywhere. Any suggestions?

Open iphoto
Connect iphone
Import video

How do you remove the time of the start of an event and end of an event

I just want to see my times of events and not the calendar start and end time.

Sorry - I was very unclear.
I'm actually talking about a full-motion capture, which used to exist on my timeline as a separate object (I thought it was an animation object), and now looks like this:
I guess that red line there is the full-motion capture - how do I make it for a shorter duration?
Chris

I have a fairly new iMac wI now have iMovie events and Final Cut pro events that are duplicates. Does that mean that all my video is copied onto my hard dive twice?

If I have video in imovie and final cut pro X, does that mean there are two copies of the video, one for each piece of SW? If so, how do I get rid of the imovie events and keep only the Final Cut Pro X events (video)? I don't want multiple copies of the same video stored on the hard drive.

If you import to FCP directly from the Camera or from a camera archive, you would likely import choosing Optimized Files which would go to a FCP event that is in ProRes 422 codec. This would be in addition to your iMovie Event which would import using the Apple Intermediate Codec. So you would have two copies of the same information. An AIC copy and a larger ProRes copy.
However, if you use FILE/IMPORT/iMOVIE EVENT LIBRARY, FCP will not duplicate the event files from iMovie. It will treat them as referenced files, and will point to the iMovie Event files in the reference. So there is no duplication. You will be editing Apple Intermediate Codec files in FCP.
However, FCP will create Event folders. In addition to the reference information, these will contain thumbnail files that are compatible with FCP, stabilization and analysis files that are compatible with FCP, as well as any intermediate render files that are associated with the Event.
So in this case, there is no duplication of the large event files, but there is some duplication of the small thumbnail files.
I have several terabytes of iMovie Events, which are now all available in FCP. Believe me, I would know if they were duplicated because all my disks would be full.

IPhoto crashes every time I select all my events and then click on events to try to auto split

My photos are out of order and grouped in to events that span years. I try to repair and rebuild as iphoto crashed each time I selected evednts to autosplit, The problem has persisted. Ideas?

Process:         iPhoto [10864]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         9.4.2 (9.4.2)
Build Info:      iPhotoProject-710042000000000~2
App Item ID:     408981381
App External ID: 11723545
Code Type:       X86 (Native)
Parent Process: launchd [186]
User ID:         502
Date/Time:       2013-04-09 14:24:10.771 -0400
OS Version:      Mac OS X 10.8.3 (12D78)
Report Version: 10
Interval Since Last Report:          12406 sec
Crashes Since Last Report:           1
Per-App Interval Since Last Report: 3063 sec
Per-App Crashes Since Last Report:   1
Anonymous UUID:                      57A35697-58F6-55FC-4CE6-9759F29AFC2C
Crashed Thread: 0 Dispatch queue: com.apple.Mercury.KDatabaseMgr_MT
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x000000000000000c
VM Regions Near 0xc:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Applications/iPhoto.app/Contents/MacOS/iPhoto
    VM_ALLOCATE            0000000000001000-0000000000006000 [   20K] ---/--- SM=NUL
Application Specific Information:
Validating menu item 'Create Event' with action @selector(createRollFromSelection:)
Thread 0 Crashed:: Dispatch queue: com.apple.Mercury.KDatabaseMgr_MT
0   com.apple.iLifeSQLAccess                0x02131852 -[HgBucket writeNextDrop] + 100
1   com.apple.iLifeSQLAccess                0x0211d70b __62-[HgIterator fillBucketForColumns:fromQuery:modelIdCheckList:]_block_invoke_0 + 346
2   com.apple.iLifeSQLAccess                0x020c8dc5 __55-[HgEntity _dispatch_sync_if_needed_suspend:withBlock:]_block_invoke_0 + 26
3   libdispatch.dylib                       0x9329ec82 _dispatch_client_callout + 46
4   libdispatch.dylib                       0x932a0456 _dispatch_barrier_sync_f_invoke + 39
5   libdispatch.dylib                       0x932a042d dispatch_barrier_sync_f + 87
6   libdispatch.dylib                       0x932a2c3e dispatch_sync + 45
7   com.apple.iLifeSQLAccess                0x020c8d78 -[HgEntity _dispatch_sync_if_needed_suspend:withBlock:] + 251
8   com.apple.iLifeSQLAccess                0x020c8c78 -[HgEntity dispatch_sync_if_needed:] + 48
9   com.apple.iLifeSQLAccess                0x0211d51e -[HgIterator fillBucketForColumns:fromQuery:modelIdCheckList:] + 766
10 com.apple.iLifeSQLAccess                0x0211f322 -[HgIterator loadNextBatch] + 1837
11 com.apple.iLifeSQLAccess                0x020ba8e3 -[HgIterator next] + 205
12 com.apple.iLifeSQLAccess                0x020cc94b -[HgEntity setForColumn:fromQuery:] + 318
13 com.apple.iLifeSQLAccess                0x020cc0ce -[HgEntity modelIdsFromQuery:] + 316
14 com.apple.iLifeSQLAccess                0x020a61c1 -[HgEntity modelIdsWhere:args:] + 81
15 com.apple.iLifeSQLAccess                0x020cc1ef -[HgEntity modelIdsWhere:] + 87
16 com.apple.RedRock                       0x026726a7 -[RKMaster versions] + 194
17 com.apple.iPhoto                        0x003caefa 0x6000 + 3952378
18 com.apple.iPhoto                        0x001fe42f 0x6000 + 2065455
19 com.apple.iPhoto                        0x001fd460 0x6000 + 2061408
20 com.apple.AppKit                        0x925ba1ad -[NSMenu _enableItem:] + 995
21 com.apple.AppKit                        0x9261a9b3 -[NSCarbonMenuImpl _carbonUpdateStatusEvent:handlerCallRef:] + 542
22 com.apple.AppKit                        0x9261673e NSSLMMenuEventHandler + 454
23 com.apple.HIToolbox                     0x943149bb _InvokeEventHandlerUPP(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*, long (*)(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)) + 36
24 com.apple.HIToolbox                     0x9419c394 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1343
25 com.apple.HIToolbox                     0x9419b780 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 430
26 com.apple.HIToolbox                     0x941af655 SendEventToEventTarget + 88
27 com.apple.HIToolbox                     0x9431486a SendHICommandEvent(unsigned long, HICommand const*, unsigned long, unsigned long, unsigned char, void const*, OpaqueEventTargetRef*, OpaqueEventTargetRef*, OpaqueEventRef**) + 498
28 com.apple.HIToolbox                     0x941705f0 UpdateHICommandStatusWithCachedEvent + 70
29 com.apple.HIToolbox                     0x94197be2 HIApplication::EventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 4030
30 com.apple.HIToolbox                     0x943149bb _InvokeEventHandlerUPP(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*, long (*)(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)) + 36
31 com.apple.HIToolbox                     0x9419c394 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1343
32 com.apple.HIToolbox                     0x9419b780 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 430
33 com.apple.HIToolbox                     0x941af655 SendEventToEventTarget + 88
34 com.apple.HIToolbox                     0x94360054 SendMenuOpening(MenuSelectData*, MenuData*, double, unsigned long, unsigned long, __CFDictionary*, unsigned char, unsigned char*) + 866
35 com.apple.HIToolbox                     0x9416fdfd DrawTheMenu(MenuSelectData*, __CFArray**, unsigned char, unsigned char*) + 197
36 com.apple.HIToolbox                     0x9416fca7 MenuChanged(MenuSelectData*, unsigned char, unsigned char) + 637
37 com.apple.HIToolbox                     0x9416f2ad TrackMenuCommon(MenuSelectData&, unsigned char*) + 1211
38 com.apple.HIToolbox                     0x94360db9 MenuSelectCore(MenuData*, Point, double, unsigned long, OpaqueMenuRef**, unsigned short*) + 426
39 com.apple.HIToolbox                     0x9416c132 _HandleMenuSelection2 + 633
40 com.apple.HIToolbox                     0x9416beaf _HandleMenuSelection + 53
41 com.apple.AppKit                        0x924cf3ca _NSHandleCarbonMenuEvent + 309
42 com.apple.AppKit                        0x923f604f _DPSNextEvent + 2425
43 com.apple.AppKit                        0x923f51dc -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
44 com.apple.AppKit                        0x923eb63c -[NSApplication run] + 855
45 com.apple.AppKit                        0x9238e666 NSApplicationMain + 1053
46 com.apple.iPhoto                        0x00015c99 0x6000 + 64665
47 com.apple.iPhoto                        0x000152e5 0x6000 + 62181
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib                  0x932e89ae kevent + 10
1   libdispatch.dylib                       0x932a1c71 _dispatch_mgr_invoke + 993
2   libdispatch.dylib                       0x932a17a9 _dispatch_mgr_thread + 53

HT2966 I changed a repeating event and this ****** DELETED 10 events. How to restore this from timemachine backup?

On the iPhone you can change how many times an event is repeated. I changed that number from 10 to 11 and it automatically deleted all my 10 events and replaced the valuable notes with *nothing*.
I do daily backups with timemachine, but cant seem to find a way to restore the events - since I already made a lot of changes today.
next question: is there an ical alternative, which is actually safe to use for business?

For anyone else that may be in a similar situation, I can confirm that this does actually work.
I am unsure why I was not able to mount the original sparseimage that I copied to the USB drive before, but I have gone through the entire process again and I could successfully mount the TM sparseimage onto my MacBook and restore files from within it using TimeMachine to my Mac.
This is a Disaster Recovery solution only needed for if both my NAS and Macbook get stolen or damaged so I am happy with this solution for now.
I will try the restore process several more times from my monthly backups to reassure myself that the first failure to mount the sparse image was an anomaly.
This is the process that I have tested:
Configure MacBook to backup to TimeMachine Service running on QNAP NAS device.
Perform regular backup of QNAP NAS Device (Linux) including the TimeMachine backup data to an external USB drive with encryption enabled and store this device safely off-site
In time of loss of both NAS and MacBook, Time Machine data can be recovered to another Mac without the need of the NAS using the following process:
Mount the external drive containing the backup of the NAS filesystem (ext4) which is encrypted onto a Linux host so it is readable - use the cryptsetup luksOpen options to access the encrypted filesystem then mount it.
Mount a n empty HFS+ formatted USB drive on the Linux host
Use Rsync to copy the sparsebundle from the external NAS drive backup disk to the root of the USB Drive
Insert the HFS+ formatted USB containing the sparesbundle into the Mac's USB port
Double click the sparsebundle to mount it onto the Mac as a Volume
Using Alt button and the TimeMachine icon, select use alternative backup disk and you should see the TM backup in the sparsebundle
Enter TimeMachine and you should be able to restore any/all files
Hope that helps someone else and thanks to LaPastenague for pointing me in the direction of some of the answers I needed.
Rgds
Gary

Thru MEB4 the Tax amount and Tax percenatage not trigger in Background Job

Hi,
          When I am executing the T.Code- MEB4 (Rebate Settlement) thru Foreground the Vendor Rebate Amount and Tax are showing.
                                  When I am executing in Background job the Tax amount and Tax Percentage are not triggering (Only the Rebate amount only showing) after execution of Background job in when viewing the job display.
                   Background Job Name: RWMBON01.
   Please suggest.

Shankar,
Thanks for reply.
If I don't put amount in the basic data tab( MIRO) then it does not allow to "simulate" or "Post". But here I can simulate and Post
I check every thing in WHT Config but I could't found the solution.
I want to tell another thing, we recently went to patch upgrade from Version 4.7 E SP 22   to 4.7 E SP30.
My question, Is the pacth upgrade affects in anyway???
If any suitable answer appreciatable.
Thanks once again for your reply.

I cannot dismiss my events and not all my events are showing.

It looks like my calendar is not syncing properly. I have a yellow triangle with an ! in it next to my google calendar profile.

You might still be able to recover them using one of the methods discussed in this older thread, but many of them require a full functional, noncorrupted iPod filesystem in order to work properly.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Download spool and convert it to pdf in background job

Hello experts,
RSTXPDFT4 works fine for me if i want to convert spools to pdf files in foreground mode.
If i want to do this in background mode as a daily job i am not able to use RSTXPDFT4.
With report RSTXPDFT5 i am able to download in background as binary data but not as pdf.
So, i want to download spools to network shared folder in pdf formaat.
Thanks for suggestions & Regards
Janez

If i use GUI_DOWNLOAD which is used in this function than i have to be loged on and file is saved in my sapworkdir on my computer and not on networh share.
To create and save TXT file on network shared folder i have to use opendataset statement and write data in file. But i don't know how to use it or to implement it in program RSTXPDFT4 to save spool job with specific id as pdf file. If i pass spool job id to RSTXPDFT4 i can save pdf file on local drive inside of sapworkdir or any where on clien computer nd of course in dialog mode.
I want to save specific spool job with specific spool ID in background mode on network folder.
Thanks & Regards
Janez

Should every SQL query have its own event and command?

Hello,
I am developing an application using Cairngorm. My app uses SQL databases.
I'm creating a separate event and command for each SQL query my application requires. I end up with many events and commands - twenty different event/command pairs and I'm not even done yet.
I was wondering if this is the right way to go, or if somehow similar SQL queries should be grouped together in the same event/command, and if so, how would I implement that elegantly?
I've never used Cairngorm before so I want to make sure I do it correctly.
Thank you for your time and any assistance you can offer.

From my point of view, writing any SQL query or making queries directly from the presentation layer (eg. flex) to the db server it's almost always incorrect, awfull and maybe even insecure. The client layer should be more independent from the implementation layer as for instance the db server you are using. Instead you should call services on the server side and then they should have a DAO layer o whatever where the queries are done. You could then invoke one of this services and pass parameters that indicates what you want to do. (except you are using remoting where you will be invoking methods directly)
Consider the case where you have a Java implemented service layer, you could be using hibernate to access the database and not writing a single line of SQL (maybe some HQL) and then you could do all the queries you need and return the beans retrieved from the database to the client layer using AMF3 and it's serialization/deserialization mechanisms. In a future you could modify your app to use JPA and then this layer use hibernate, then you client layer will remain the same the only changes will be done under the DAO layer.
So again, in my opinion, db server should never be accesed directly from the presentation layer (Flex, Air or whatever) but from the backend services and this sould be completly abstract to the client layer. I have seen some people trying to do SQL queries from Flash but that it's giving a task to the Flash player it has never been intended to do. A miss use of the thin client the Flash Player is and an bad architecture.
It would be great to hear others opinions.

What's the difference between splitting events and creating an event?

With photos selected in an event, "splitting" the event and "creating a new event" appear to do the same thing. Is there any difference? In either case, a new event is created with the selected photos taken out of the original event.
doug

Doug:
Auto split will split up the event into events based on the date requirement that's been set for events, i.e. 1 day per ever, 1 week ,etc. It's automatic. Whereas creating a new event you determine which photos go into that event.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

IPhoto events and Aperture projects

What happens to iPhoto events and Aperture projects in Photos? I have read that Events and Projects are not available in the new Photos app. My library is entirely organised this way. If Photos is organised just by date, then will all my years of sorting be lost?

If, like me, you used Events as your main organizational tool - you will really be disappointed in Photos.   My Albums transferred, but I had over 100,000 pictures, taken over 13 years and organized mostly by the "Event/Title" line above each group of pictures.   Those titles did not transfer to Photos.
They do have an Album titled iPhoto Events and a lot of events are in there - however, not all and they are in a completely random order.   In my case, over 3,000 events with absolutely no way to find anything other than scroll through or possibly search. Also, at this time there is no way to move forward with Event organization as it does not exist.   There is not way in Photos to label each days photos with an event or title.   It's like one big huge shoebox with date order the only organization. Ridiculous.
I mostly use a 35mm SLR Camera without any GPS designation - so I now have 109,000 photos in one big list organized by nothing but the date taken or scanned.
I have also scanned a lot of family history photos and old family photos - fortunately I put most of those in Albums - otherwise Photos is very excited to just list them according to the date I scanned them which has nothing to do with the content of the photo.
Definitely back up your iPhoto before you do anything.   I am looking for an outside program that will continue my organization and not throw everything out on the whim of people who just use photos for social media and sharing.   This change made me realize that Apple has no intention of creating and keeping a serious organization system for amateur and professional photographers who have a large number of files that need to be organized and kept for many years.

Recon Events and Resource Status

I have GTC reconciliation set up to auto-provision accounts to AD and Lotus Notes. As a System Administrator I want a way to see the status of the inbound user from GTC and the outcome of the resource provisioning. If there is an error in one of them I then want to be able to restart the process once the error is resolved. Is there any easy way to do this or do I need to use the database and APIs directly.
Pete

For inbound, you can track recon events and the state of event. If the event is matched, then it is completed.
For resource status, if the resource does not provision properly, the status will start as "Provisioning" state. There should be OOTB reports, or you can go to Manage Resources through the Web UI and choose the user's associated option. Then set the status to provisioning to see the users whose status did not complete.
Database queries will be the quickest way though, and turning those into reports.
-Kevin

How do I organize my photos into events and then move from my mac to my Ipad

New to mac. Have moved 3000 pictures to Iphoto. How do I organize into events and then download those events to my ipad?

Have a look at the tutorials here
http://www.apple.com/findouthow/photos/
Essentailly, your photos are broken into Events automtically. You sync with your iPad via iTunes.
Regards
TD

Retrieve city and state from zip code that is entered by user

I am trying to use AJAX to retrieve city and state from a table based on a zip code that is entered by the user. Two are text fields (zip code and city) and one is a SELECT field (state).
1. I defined an application item called TEMPORARY_APPLICATION_ITEM.
2. I defined an application process called SET_CITY_STATE as follows:
    a. Process point: on demand
    b. type: anonymous block
    c. process text:
<pre>
DECLARE
v_city VARCHAR2 (100);
v_state VARCHAR2 (2);
CURSOR cur_c
IS
SELECT city, state
FROM ZIP
WHERE zip = v ('TEMPORARY_APPLICATION_ITEM');
BEGIN
FOR c IN cur_c
LOOP
v_city := c.city;
v_state := c.state;
END LOOP;
apex_util.set_session_state('P2_CO_CITY',v_city);
apex_util.set_session_state('P2_CO_STATE',v_state);
EXCEPTION
WHEN OTHERS
THEN
apex_util.set_session_state('P2_CITY','Unknown city');
apex_util.set_session_state('P2_STATE',null);
END;
</pre>
3. Javascript is defined in the region header:
<pre>
<script language="JavaScript" type="text/javascript">

</script>
</pre>
4. In the HTML Form Element Attributes of the P2_CO_ZIP text item: onchange="pull_city_state(this.value)";
The city and state are not being populated. I checked the select statement and it is retreiving the city and state in SQL WORKSHOP > SQL COMMANDS.
I would like to use it for the mailing address as well, so I would need to make the application process / javascript a bit more generic to be used in two places.
I placed the application on apex.oracle.com:
Workspace: RGWORK
Application: Online Certification Application (28022)
Can someone assists, please.
Thank you,
Robert
Edited by: sect55 on Jun 2, 2009 4:11 PM

Hi Robert,
Try using XML instead of session state -
Change the application on demand process with the following script -
>
DECLARE
v_city VARCHAR2 (100);
v_state VARCHAR2 (2);
CURSOR cur_c
IS
SELECT city, state
FROM ZIP
WHERE zip = v ('TEMPORARY_APPLICATION_ITEM');
BEGIN
FOR c IN cur_c
LOOP
v_city := c.city;
v_state := c.state;
END LOOP;
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="P2_CO_CITY">' || v_city || '</item>');
HTP.prn ('<item id="P2_CO_STATE">' || v_state || '</item>');
HTP.prn ('</body>');
EXCEPTION
WHEN OTHERS
THEN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="P2_CITY">' || 'Unknown city' || '</item>');
HTP.prn ('<item id="P2_STATE">' || '' || '</item>');
HTP.prn ('</body>');
END;
>
in your javascript make sure you typing the application process name correctly as it is case sensitive.
Hope this helps,
Regards,
M Tajuddin
web: http://tajuddin.whitepagesbd.com

Retrieve event and event parameter in event based background job

Similar Messages

Maybe you are looking for