Retrieving TDMS files in Directory
In the script below, I have 2 issues with the usage of DataFileLstGet :
1. The wildcard specified is (*.tdms) which I think should only look for (.tdms) files, but it is also picking up (.tmds_index) files,
I am temporarily filtering this out by checking for the file extension length as four.
2. The function only returns that there are 2 tdms files in the directory pointed to, while in reality I have more than 2 files in this directory.
Can anyone give me an idea of what the issue could be ? I am using Diadem version 10.2 Base Edition, VB script engine is 5,5,0,5207.
Thanks.
Option Explicit
Dim intCount
Dim ExcelFilename
Dim TDMSFilename
Dim Ret
Dim FileExt
Dim FileExt1
Dim NumFiles
FileExt1 = "TDMS"
Ret = PathNameGet("TDMSFiles Location", "D:\MFT\datamine\pmm\testresults\")
Call DataDelAll(1)
If FilEx(OutPutPath & "*.TDMS") Then
Call DataFileLstGet(OutPutPath & "*.TDMS")
' Call MsgBoxDisp (DataFileLstLen)
For intCount = 1 to DataFileLstLen
' Call MsgBoxDisp (DataFileLst(intCount))
FileExt = NameSplit(DataFileLst(intCount), "E")
' Call MsgBoxDisp (FileExt)
' Call MsgBoxDisp (Len(FileExt))
FileName = NameSplit(DataFileLst(intCount), "N")
If Len(FileExt) = 4 Then
TDMSFilename = OutPutPath & DataFileLst(intCount)
Call DataFileLoadSel(TDMSFilename,"TDMS","*/*","Load")
ExcelFilename = OutPutPath & FileName & ".xls"
Call ExcelExport(ExcelFilename,"", 0, OutPutPath & "EXCEL.STP")
Call DataDelAll(1)
End If
Next
Else
MsgBoxDisp("No TDMS files found")
End If
try this Code instead:
Option Explicit
Dim s
Dim oFSO
Dim oFolder
Dim oFiles
Dim oFile
Dim Ret
Dim ExcelFilename
Dim TDMSFilename
Ret = PathNameGet("TDMSFiles Location", "D:\MFT\datamine\pmm\testresults\")
Call DataDelAll(1)
Set oFSO = CreateObject("Scripting.FileSystemObject")
Set oFolder = oFSO.GetFolder(OutPutPath)
For Each oFile in oFolder.Files
' Do-It-Yourself Extension Filter
If UCase(NameSplit(oFile.name, "E")) = "TDMS" Then
TDMSFilename = OutPutPath & oFile.name
Call DataFileLoadSel(TDMSFilename,"TDMS","*/*","Load")
ExcelFilename = OutPutPath & FileName & ".xls"
Call ExcelExport(ExcelFilename,"", 0, OutPutPath & "EXCEL.STP")
Call DataDelAll(1)
End If
Next
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?
Similar Messages
-
How to retrieve all files in a given directory?
Hi all,
I am a newbie to Java. I have to retrieve all files in a given directory. The names of the files are not known to me. Only the name of the directory is known. How can I retrieve and read all those files?
GaryCheck out the list and listFiles method: http://java.sun.com/j2se/1.3/docs/api/java/io/File.html
-
Retrieve all files in a directory
Hi,
I need to retrieve a list of files or all file names in a certain directory.
Does anyone know how what classes to use??
ThanksHi,
The following code retrieves the file list from the user's current directory. Note, the user should have read permission on the directory.
String dir = System.getProperty("user.dir");
File file = new File(dir);
if (file.isDirectory()) {
String fileList[] = file.list();
int i,n=fileList.length;
for (i=0;i<n;i++) {
System.out.println(fileList);
Hope this Helps,
-Srikanth -
Can we create TDMS file using C# and retrieve the data using a diadem
I want to write a tdms file from a dot net application and to use the diadem to retrieve the data and to create a user defined report
Hello,
If you want this kind of output, you can use Java Mapping e.g
1. Create your data type like this:
CHARSET 0..1
LOADMODE 0..1
CODEFORMAT 0..1
CURRENCY 0..1
SUPPLIERID_DOMAIN 0..1
ITEMCOUNT 0..1
TIMESTAMP 0..1
UNUOM 0..1
COMMENTS 0..1
FIELDNAMES 0..1
DATA 0..unbounded
ENDOFDATA
2.In your message mapping assign all the constants. You might want to concat all the values of the FIELDNAMES and output them to DATA
3.In your Java Mapping, replace all the XML fields including ,, with ,''',
4.In ID, do not use FCC.
Hope this helps,
Mark -
Retrieve text file from ftp server every 15 mins
Hi guys,
We are able to connect to an FTP server with 5 text files. Every 15 minutes, we need to retrieve each of the 5 files. Please assist me with the coding logic to retrieve the file into the SAP Directory. Any suggestions would be greatly appreciated.
Regards,
SidSid
Try searching on SCN, there are plenty of materials you can find without even asking a question in the forum.
How to use SCN search
For example, if you search with keywords "FTP ABAP", immediately the first two Wiki entries would give you the details you are looking for.
Rgds
Eng Swee -
I am getting (No such file or directory) in xml report
Hi All
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
Current system time is 20-JUL-2011 11:57:05
XML/BI Publisher Version : 5.6.3
Request ID: 21777521
All Parameters: Dummy for Data Security=Y:ReportRequestID=21777518:DebugFlag=Y
Report Req ID: 21777518
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:ADTCERP
Preparing parameters
null output =/oracle-new/ora/prod/inst/apps/ADTCTEST_adtcerp/logs/appl/conc/out/o21777521.out
inputfilename =/oracle-new/ora/prod/inst/apps/ADTCTEST_adtcerp/logs/appl/conc/out/o21777518.out
Data XML File:/oracle-new/ora/prod/inst/apps/ADTCTEST_adtcerp/logs/appl/conc/out/o21777518.out
Set Bursting parameters..
Temp. Directory:/oracle-new/ora/prod/apps/apps_st/appl/admin/ADTCTEST/out
[072011_115708595][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.5.0 - Production
[072011_115708597][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=21777518, user-variable:cp:language=en, user-variable:cp:responsibility=20707, user-variable.OA_MEDIA=http://adtcerp.tawteencouncil.ae:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=21777518, user-variable:cp:locale=en-US, user-variable:cp:user=TRANSSYS, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=21777521, user-variable:cp:org_id=161, user-variable:cp:reportdescription=ADTC Receipt Note to Supplier, user-variable:cp:Dummy for Data Security=Y}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
--Exception
/oracle-new/ora/prod/apps/apps_st/appl/admin/ADTCTEST/out/072011_115708688/Receipt_ Ack_.pdf (No such file or directory)
java.io.FileNotFoundException: /oracle-new/ora/prod/apps/apps_st/appl/admin/ADTCTEST/out/072011_115708688/Receipt_ Ack_.pdf (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:120)
at java.io.FileInputStream.<init>(FileInputStream.java:79)
at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:523)
at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
------------- 1) PUBLISH -------------
Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte.I am also this same issue... did you get this one resolved?
--Nani -
Retrieving the file name in the adapter module in the sender file adapter
hi,
i need to retrieve the file name, in the adapter module. This module is placed in the sender file channel.
After the file adapter has picked up the file from the file directory, the file is placed in the archived directory.Custom adapter mofule is place in the file shanel. i need to retrieve the file name of the file in the adapter module. Is it possible to retrieve the file name?
Also is it possible to retrieve the archive directory path in module?
Regards,
MeenkashiHi Meenakshi,
I guess you are looking for this
/people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
Regards
Suraj -
Reading all files on directory using "utl_file" package...
I need to read all files in directory via PL/SQL. I don't know
name files (are data dynamics create for automation system),
only I know your extensions.
Can I do this using the package "utl_file" or I need to create
program in another language (C, C++, for example)?
Any ideas...
Thanks.Hi,
you can't do that with the UTL_FILE package (it can't retrieve
file names).
A very simple solution would be, if you created on OS-level a
file which contains the filenames of directory and then read this
file using UTL_FILE. With the information on all file names you
can enter a loop which opens and reads all files again using
UTL_FILE.
A more mundane solution could be to use the features on the iFS.
Cheers
Gerald -
Here is an install log:
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for a BSD-compatible install... /bin/install -c
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether gcc and cc understand -c and -o together... yes
checking for pkg-config... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.19... yes
checking for fopencookie... yes
checking for funopen... no
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for iconv... yes
checking for working iconv... yes
checking for iconv declaration...
extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking alsa/asoundlib.h usability... yes
checking alsa/asoundlib.h presence... yes
checking for alsa/asoundlib.h... yes
checking for snd_pcm_open in -lasound... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for unistd.h... (cached) yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for sys/stat.h... (cached) yes
checking linux/soundcard.h usability... yes
checking linux/soundcard.h presence... yes
checking for linux/soundcard.h... yes
checking for alsa/asoundlib.h... (cached) yes
checking dirent.h usability... yes
checking dirent.h presence... yes
checking for dirent.h... yes
checking mcheck.h usability... yes
checking mcheck.h presence... yes
checking for mcheck.h... yes
checking sys/statfs.h usability... yes
checking sys/statfs.h presence... yes
checking for sys/statfs.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking assert.h usability... yes
checking assert.h presence... yes
checking for assert.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for sys/mount.h... yes
checking sys/inotify.h usability... yes
checking sys/inotify.h presence... yes
checking for sys/inotify.h... yes
checking for calloc... yes
checking for malloc... yes
checking for free... yes
checking for popen... yes
checking for sysinfo... yes
checking for getloadavg... yes
checking for memrchr... yes
checking for strndup... yes
checking for gethostbyname_r... yes
checking for library containing clock_gettime... -lrt
checking for struct statfs.f_fstypename... no
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for db2x_xsltproc... no
checking for db2x_manxml... no
checking for xsltproc... no
checking if /usr/bin/ld accepts -O1... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating data/Makefile
config.status: creating doc/Makefile
config.status: creating src/Makefile
config.status: creating src/build.h
config.status: creating lua/Makefile
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
conky 1.7.2 configured successfully:
Installing into: /usr
System config dir: /etc
C compiler flags: -Wall -W
Libraries: -lm -lasound -lrt
Linker flags: -Wl,-O1
* X11:
X11 support: no
XDamage support: no
XDBE support: no
Xft support: no
* Music detection:
Audacious: no
BMPx: no
MPD: yes
MOC: yes
XMMS2: no
* General:
OpenMP:
math: yes
hddtemp: no
portmon: no
RSS: no
Curl: no
Weather
METAR: no
XOAP: no
wireless: no
IBM: no
nvidia: no
eve-online: no
config-output: yes
Imlib2: no
ALSA mixer: yes
apcupsd: yes
I/O stats: yes
* Lua (no) bindings:
Cairo: no
Imlib2: no
Making all in src
/bin/sh: line 17: cd: src: No such file or directory
make: *** [all-recursive] Error 1
A couple of months ago I stumbled upon this problem, but handfixed all entrances in Makefiles recursively, changing explicitly '/bin/sh' on '/bin/bash' (although, /bin/sh is a link on /bin/bash). Now I had do deploy archlinux on another machine and here's the problem, again.
Last edited by cra (2009-10-27 12:43:53)Ok, I rm'ed the src and pkg subdirectories for package cairo-lcd, here's what I have:
(Actually, no specific options for makepkg)
[cra@cratop 07:47:47 ~/downloads/cairo-lcd]
$ ls
PKGBUILD cairo-1.8.8.tar.gz lcd-filter.patch
[cra@cratop 07:48:46 ~/downloads/cairo-lcd]
$ makepkg
==> Making package: cairo-lcd 1.8.8-1 i686 (Wed Oct 21 07:48:50 MSD 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found cairo-1.8.8.tar.gz in build dir
-> Found lcd-filter.patch in build dir
==> Validating source files with md5sums...
cairo-1.8.8.tar.gz ... Passed
lcd-filter.patch ... Passed
==> Extracting Sources...
-> bsdtar -x -f "cairo-1.8.8.tar.gz"
==> Entering fakeroot environment...
==> Starting build()...
patching file doc/public/cairo-sections.txt
Hunk #1 succeeded at 326 (offset 7 lines).
patching file src/cairo-font-options.c
patching file src/cairo-ft-font.c
Hunk #2 succeeded at 742 (offset 3 lines).
Hunk #3 succeeded at 1034 (offset 3 lines).
Hunk #4 succeeded at 1091 (offset 3 lines).
Hunk #5 succeeded at 1103 (offset 3 lines).
Hunk #6 succeeded at 1124 (offset 3 lines).
Hunk #7 succeeded at 1162 (offset 3 lines).
Hunk #8 succeeded at 1225 (offset 3 lines).
Hunk #9 succeeded at 1252 (offset 3 lines).
Hunk #10 succeeded at 1500 (offset 3 lines).
Hunk #11 succeeded at 1542 (offset 3 lines).
Hunk #12 succeeded at 1578 (offset 3 lines).
Hunk #13 succeeded at 1697 (offset 3 lines).
Hunk #14 succeeded at 1726 (offset 3 lines).
Hunk #15 succeeded at 2695 (offset 25 lines).
patching file src/cairo-types-private.h
Hunk #1 succeeded at 116 (offset 8 lines).
patching file src/cairo-xlib-screen.c
Hunk #1 succeeded at 143 with fuzz 1 (offset 11 lines).
Hunk #2 succeeded at 159 (offset 11 lines).
Hunk #3 succeeded at 257 (offset 11 lines).
Hunk #4 succeeded at 287 (offset 11 lines).
patching file src/cairo.h
Hunk #1 succeeded at 1046 (offset 78 lines).
Hunk #2 succeeded at 1171 (offset 78 lines).
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for bash... /bin/bash
checking if dolt supports this host... yes, replacing libtool
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether to build gtk-doc documentation... no
checking for gtkdoc-check... no
checking for find... /usr/bin/find
checking for xargs... /usr/bin/xargs
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether gcc and cc understand -c and -o together... yes
checking for inline... inline
checking for pkg-config... (cached) /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether byte ordering is bigendian... no
checking whether float word ordering is bigendian... no
checking for native atomic primitives... Intel
checking whether atomic ops require a memory barrier... no
checking for native Win32... no
checking for Sun Solaris (non-POSIX ctime_r)... no
checking for cos in -lm... yes
checking for sched_yield in -lrt... yes
checking for stdint.h... (cached) yes
checking for inttypes.h... (cached) yes
checking sys/int_types.h usability... no
checking sys/int_types.h presence... no
checking for sys/int_types.h... no
checking for uint64_t... yes
checking for uint128_t... no
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for unistd.h... (cached) yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for sys/stat.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/poll.h usability... yes
checking sys/poll.h presence... yes
checking for sys/poll.h... yes
checking sys/un.h usability... yes
checking sys/un.h presence... yes
checking for sys/un.h... yes
checking sched.h usability... yes
checking sched.h presence... yes
checking for sched.h... yes
checking for sched_getaffinity... yes
checking fenv.h usability... yes
checking fenv.h presence... yes
checking for fenv.h... yes
checking for feenableexcept... yes
checking for fedisableexcept... yes
checking libgen.h usability... yes
checking libgen.h presence... yes
checking for libgen.h... yes
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking for signal.h... (cached) yes
checking setjmp.h usability... yes
checking setjmp.h presence... yes
checking for setjmp.h... yes
checking for vasnprintf... no
checking for link... yes
checking for ctime_r... yes
checking for drand48... yes
checking for flockfile... yes
checking windows.h usability... no
checking windows.h presence... no
checking for windows.h... no
checking for supported warning flags...
checking whether gcc supports -Wall... yes
checking whether gcc supports -Wextra... yes
checking whether gcc supports -Wsign-compare... yes
checking whether gcc supports -Werror-implicit-function-declaration... yes
checking whether gcc supports -Wpointer-arith... yes
checking whether gcc supports -Wwrite-strings... yes
checking whether gcc supports -Wstrict-prototypes... yes
checking whether gcc supports -Wmissing-prototypes... yes
checking whether gcc supports -Wmissing-declarations... yes
checking whether gcc supports -Wnested-externs... yes
checking whether gcc supports -Wpacked... yes
checking whether gcc supports -Wswitch-enum... yes
checking whether gcc supports -Wmissing-format-attribute... yes
checking whether gcc supports -Wstrict-aliasing=2... yes
checking whether gcc supports -Winit-self... yes
checking whether gcc supports -Wunsafe-loop-optimizations... yes
checking whether gcc supports -Wdeclaration-after-statement... yes
checking whether gcc supports -Wold-style-definition... yes
checking whether gcc supports -Wno-missing-field-initializers... yes
checking whether gcc supports -Wno-unused-parameter... yes
checking whether gcc supports -Wno-attributes... yes
checking whether gcc supports -Wno-long-long... yes
checking whether gcc supports -Winline... yes
checking whether gcc supports -fno-strict-aliasing... yes
checking whether gcc supports -fno-common... yes
checking whether gcc supports -Wp,-D_FORTIFY_SOURCE=2... yes
checking which warning flags were supported... -Wall -Wextra -Wsign-compare -Werror-implicit-function-declaration -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Wpacked -Wswitch-enum -Wmissing-format-attribute -Wstrict-aliasing=2 -Winit-self -Wunsafe-loop-optimizations -Wdeclaration-after-statement -Wold-style-definition -Wno-missing-field-initializers -Wno-unused-parameter -Wno-attributes -Wno-long-long -Winline -fno-strict-aliasing -fno-common -Wp,-D_FORTIFY_SOURCE=2
checking how to enable unused result warnings... __attribute__((__warn_unused_result__))
checking how to allow undefined symbols in shared libraries used by test suite... checking whether gcc supports -Wl,--allow-shlib-undefined... yes
-Wl,--allow-shlib-undefined
checking for VALGRIND... no
no
checking for compress in -lz... yes
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for X... libraries , headers
checking for cairo's Xlib surface backend feature...
checking for xlib... yes
checking whether cairo's Xlib surface backend feature could be enabled... yes
checking for cairo's Xlib Xrender surface backend feature...
checking for xlib_xrender... yes
checking whether cairo's Xlib Xrender surface backend feature could be enabled... yes
checking for cairo's XCB surface backend feature...
checking for xcb... yes
checking whether cairo's XCB surface backend feature could be enabled... yes
checking for cairo's Quartz surface backend feature...
checking ApplicationServices/ApplicationServices.h usability... no
checking ApplicationServices/ApplicationServices.h presence... no
checking for ApplicationServices/ApplicationServices.h... no
checking CoreGraphics/CoreGraphics.h usability... no
checking CoreGraphics/CoreGraphics.h presence... no
checking for CoreGraphics/CoreGraphics.h... no
checking whether cairo's Quartz surface backend feature could be enabled... no (requires CoreGraphics framework)
checking for cairo's Quartz font backend feature...
checking whether cairo's Quartz font backend feature could be enabled... no (requires CoreGraphics framework)
checking for cairo's Microsoft Windows surface backend feature...
checking whether cairo's Microsoft Windows surface backend feature could be enabled... no (requires a Win32 platform)
checking for cairo's Microsoft Windows font backend feature...
checking whether cairo's Microsoft Windows font backend feature could be enabled... no (requires a Win32 platform)
checking for cairo's PNG functions feature...
checking for png... yes
checking whether cairo's PNG functions feature could be enabled... yes
checking for cairo's FreeType font backend feature...
checking for FONTCONFIG... yes
checking for FcFini... yes
checking for FREETYPE... yes
checking whether cairo's FreeType font backend feature could be enabled... yes
checking for FT_Bitmap_Size.y_ppem... yes
checking for FT_GlyphSlot_Embolden... yes
checking for FT_Load_Sfnt_Table... yes
checking for FT_Library_SetLcdFilter... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for cairo's PostScript surface backend feature...
checking whether cairo's PostScript surface backend feature could be enabled... yes
checking for gs... gs
checking for LIBSPECTRE... yes
checking for cairo's PDF surface backend feature...
checking whether cairo's PDF surface backend feature could be enabled... yes
checking for POPPLER... yes
checking for poppler_page_render... yes
checking for cairo's SVG surface backend feature...
checking whether cairo's SVG surface backend feature could be enabled... yes
checking for LIBRSVG... yes
checking for rsvg_pixbuf_from_file... yes
checking for cairo's image surface backend feature...
checking for pixman... yes
checking whether cairo's image surface backend feature could be enabled... yes
checking for cairo's user font backend feature...
checking whether cairo's user font backend feature could be enabled... yes
checking for gtk... yes
configure: creating ./config.status
config.status: creating src/cairo.pc
config.status: creating cairo-uninstalled.pc
config.status: creating src/cairo-xlib.pc
config.status: creating cairo-xlib-uninstalled.pc
config.status: creating src/cairo-xlib-xrender.pc
config.status: creating cairo-xlib-xrender-uninstalled.pc
config.status: creating src/cairo-xcb.pc
config.status: creating cairo-xcb-uninstalled.pc
config.status: creating src/cairo-png.pc
config.status: creating cairo-png-uninstalled.pc
config.status: creating src/cairo-ft.pc
config.status: creating cairo-ft-uninstalled.pc
config.status: creating src/cairo-ps.pc
config.status: creating cairo-ps-uninstalled.pc
config.status: creating src/cairo-pdf.pc
config.status: creating cairo-pdf-uninstalled.pc
config.status: creating src/cairo-svg.pc
config.status: creating cairo-svg-uninstalled.pc
config.status: creating Makefile
config.status: creating boilerplate/Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating test/pdiff/Makefile
config.status: creating perf/Makefile
config.status: creating util/Makefile
config.status: creating doc/Makefile
config.status: creating doc/public/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing ./build/Makefile.win32.features commands
config.status: creating ./build/Makefile.win32.features
config.status: ./build/Makefile.win32.features is unchanged
config.status: executing ./src/Makefile.am.features commands
config.status: creating ./src/Makefile.am.features
config.status: ./src/Makefile.am.features is unchanged
config.status: executing ./src/Makefile.win32.features commands
config.status: creating ./src/Makefile.win32.features
config.status: ./src/Makefile.win32.features is unchanged
config.status: executing ./boilerplate/Makefile.am.features commands
config.status: creating ./boilerplate/Makefile.am.features
config.status: ./boilerplate/Makefile.am.features is unchanged
config.status: executing ./boilerplate/Makefile.win32.features commands
config.status: creating ./boilerplate/Makefile.win32.features
config.status: ./boilerplate/Makefile.win32.features is unchanged
config.status: executing src/cairo-features.h commands
config.status: creating src/cairo-features.h
config.status: executing ./src/cairo-supported-features.h commands
config.status: creating ./src/cairo-supported-features.h
config.status: ./src/cairo-supported-features.h is unchanged
config.status: executing ./build/Makefile.win32.features-h commands
config.status: creating ./build/Makefile.win32.features-h
config.status: ./build/Makefile.win32.features-h is unchanged
cairo (version 1.8.8 [release]) will be compiled with:
The following surface backends:
Image: yes (always builtin)
Xlib: yes
Xlib Xrender: yes
Quartz: no (requires CoreGraphics framework)
Quartz-image: no (disabled, use --enable-quartz-image to enable)
XCB: yes
Win32: no (requires a Win32 platform)
OS2: no (disabled, use --enable-os2 to enable)
PostScript: yes
PDF: yes
SVG: yes
glitz: no (disabled, use --enable-glitz to enable)
BeOS: no (disabled, use --enable-beos to enable)
DirectFB: no (disabled, use --enable-directfb to enable)
The following font backends:
User: yes (always builtin)
FreeType: yes
Win32: no (requires a Win32 platform)
Quartz: no (requires CoreGraphics framework)
The following functions:
PNG functions: yes
And the following internal features:
gcov support: no
test surfaces: no (disabled, use --enable-test-surfaces to enable)
ps testing: yes
pdf testing: yes
svg testing: yes
--- The XCB surface backend feature is still under active development and is
--- included in this release only as a preview. It does NOT fully work yet
--- and incompatible changes may yet be made to XCB surface backend specific
--- API.
make all-recursive
make[1]: Entering directory `/home/cra/downloads/cairo-lcd/src/cairo-1.8.8'
Making all in src
/bin/sh: line 17: cd: src: No such file or directory
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/cra/downloads/cairo-lcd/src/cairo-1.8.8'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
[cra@cratop 07:49:13 ~/downloads/cairo-lcd]
$ -
FTP adapter: exc. 550 : No such file or directory
Hi Men,
I'm working on 7.0 version.
I am facing a problem with FTP adapter.
In few words, I configured a CC FTP sender to get files from a remote server (in test mode).
As I start this channel, CC monitor retrieves the following error message:
"Could not process file '<getThisFile>.xml': com.sap.aii.adapter.file.ftp.FTPEx: 550 outbox: No such file or directory."
where '<getThisFile>.xml' is filename and "outbox" is the directory.
I presume that it recognizes the filename and the directory but the error message says "dir or file are wrongs".
I tried the same action by command line with same user and password ftp. Result: I was able to get this file from dir "outbox".
...I should exclude a file permission problem.
Here below, some Logs from "default.trc" file:
#1.5#001125BDB332006E000000390006802E0004400DCACAD490#1196327887885#com.sap.aii.adapter.file.File2XI##com.sap.aii.adapter.file.File2XI.processFtpList()#J2EE_GUEST#0####ff6d7bd09e5b11dc9e34001125bdb332#XI File2XI[CC_FTP_SND_Order_new/BS_Arianna_DEV/]_57##0#0#Error#1
#/Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File#Plain###Retrieving file 'orders.00089872.xml' failed unexpectedly with com.sap.aii.adapter.file.ftp.FTPEx: 550 outbox: No such file or directory.#
where:
CC_FTP_SND_Order_new is the CC sender;
BS_Arianna_DEV related Business Service.
'orders.00089872.xml' file to get.
'outbox' dir path
.... nothing else.
Have you ever faced a similar problem? Any suggestion to fix it?
Thanks in advance
AlexHi friends,
FTP server is a Microsoft Windows XP [Version 5.1.2600]
When I log in, I only change in a sub dir called outbox.
If I put back slash before (for WinOS), the dir path is wrong (cd \outbox should mean that outbox is under root).
Some FTP server logs:
Nov 29 09:40:00 golem ftpd[25272]: USER 8023******
Nov 29 09:40:00 golem ftpd[25272]: PASS password****
Nov 29 09:40:00 golem ftpd[25272]: SYST
Nov 29 09:40:00 golem ftpd[25272]: TYPE Image
Nov 29 09:40:00 golem ftpd[25272]: CWD outbox
Nov 29 09:40:00 golem ftpd[25272]: PASV
Nov 29 09:40:00 golem ftpd[25272]: LIST orders*
Nov 29 09:40:00 golem ftpd[25272]: CWD outbox
Nov 29 09:40:00 golem ftpd[25272]: QUIT
I suppose that XI works fine and FTP server receives two times the "cd outbox" command. II also suppose that this Windows FTP server memorizes the subdir "outbox" each time I log in by FTP with user "8023******" -
I am trying to read TDMS files directly into Matlab using the NI nilibddc.dll. I have read most of the posts on here but still have a problem...
Within Matlab I can open and read a file and get the data but I cant find anything that tells me what the sample interval (between samples) is for a particular file. I guess its in the header somewhere but how do I access it?
I cant find anything that tells what function to use to get it from the header.
In fact i cant find anyhting that tells me what the functions are in the DLL.
I tried opening the CHM help file, this has a list of all the functions but when you click on one in the contents it reports 'the address is not valid'. It seems the link is borken somehow in the help file (this is on XP)!
any help gratefully receieved!
mikehi mike,
if your data is stored in form of waveforms, this information can be retrieved from the channel:
Entity
Property
Data type
Description
tdm_channel
wf_xname
string
Name of the x-channel of the waveform
tdm_channel
wf_xunit_string
string
Unit text of the x-channel
tdm_channel
wf_start_time
time
Time stamp for the waveform
tdm_channel
wf_start_offset
double
Starting offset (to be added to the time stamp)
tdm_channel
wf_increment
double
Increment
tdm_channel
wf_samples
long
Number of samples in one shot (needed by LabVIEW when concatenating
more consecutive shots). This property is used by DIAdem and DataFinder to decide whether the tdm_channel is a waveform (wf_samples > 0) or not (wf_samples = 0, or not existing).
tdm_channel
wf_time_pref
string
(enum: "absolute" or "relative") Additional information for LabVIEW to
determine if the x-channel is treated as time (absolute) or as index
(relative). (not available in LVM) -
I have Mcafee anti-virus and currently purchased a new package, so I decided to reinstall the software as it would not verify through the other product package.
So I unistalled and tried to reinstall the software and now everytime I try to install any software it either:
(1) does not run the installation process or
(2) an error message pops up saying: "failed to create a temporary file in directory C:\PROGRA~2\: Method GetTempFileName"
I am really stuck as I now basicaly can't run installations and cannot retrieve Mcafee either.
I have an HP Elitebook 8440p.
Any ideas??Not permissions. Not TEMP path name.
After some research we ran Process Monitor during the build. Turns out we used up all of the temporary file names... LOL!
Tmp file names in Vista, and maybe others, have the format tmp####.tmp, where #### is 0x0000 to 0xffff. When we looked in the Temp directory we found over 65,000 TMP files. We are guessing that CSC creates these files but does not remove them. After so many thousands of builds, we ran out of names. We thought they were gone when we ran Disk Cleanup, but MSBUILD uses the administrator account while we were cleaning from a user account.
Might be nice if CSC deleted it's TMP files...
There ya go, add that to your bag of tricks... :) -
Scc question: how can I retrieve all files in 6.1?
hello
I have recently upgraded from LV5.1 to 6.1.. In 5.1
it was possible to retrieve all files of a project
with scc. When I try to do that in 6.1 (scc provider, select changed files, get latest version..) LV searches
always in the local work directory for the vi's, but they don't exist, so I have to press "cancel" all the
time.
Is there an easier way to retrieve all files of a project at once???
thanksNI support has sent me this VI, replace the original
VI and it works..
Attachments:
Builtin_SCC_Retrieve_sub.vi 74 KB -
Can't un-write protect TDM files
I am using the storage VIs to manipulate a TDM file that was created using the TDM header writer API. When I try to do any operations on it (specifically, deleting a channel), i get error -2561 "Data storage is write-protected.". I have checked the permissions on the file and they should be correct.
I ran some tests and found that i can create a TDM file using the storage VIs and delete a channel without any issues. According to LabVIEW, the file created using this method has the same permissions of the problem file.
Do you think this could be a bug with the TDM header writer VIs? Or am i missing something obvious?
I have attached files showcasing the issue.
Thanks in advance for any help.
Attachments:
TDM test.zip 131 KBBazookazuz-
The standard is described in the Developer Zone described above. TDM files are binary files written such that it follows a particular pattern. That way the data can be easily retrieved and interpreted later. It is written in the fashion to save disk space and to be created/modified quickly. All TDM files acquiring data from multiple channels follow the same format alternating between each channel taking each sample (also described in the Developer Zone article). By converting the data to End-to-End, it makes all the data for each channel together.
In order to distinguish between the modified and unmodified tdm files, there is no way to just look at the file type and know without a naming scheme. Programmatically, you can parse out the first few data sets and see if they are the same channel and then you can determine from there.
Regards,
Mike S
NI AE -
Receiving java.io.FileNotFoundException: (No such file or directory)
Hi,
I'm trying to use XML Bursting program in 11.5.10. I have uploaded the control file, data template. But the XML Publisher Bursting program completes with error and below is the error message in the log file:
XML/BI Publisher Version : 5.6.3
Request ID: 51460124
All Parameters: ReportRequestID=51460123:DebugFlag=Y
Report Req ID: 51460123
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:WWWPDCDSORACD01
Preparing parameters
null output =/wdevp/ora/applmgr/comn/admin/out/WDEVP_wwwpdcdsoracd01/o51460124.out
inputfilename =/wdevp/ora/applmgr/comn/admin/out/WDEVP_wwwpdcdsoracd01/o51460123.out
Data XML File:/wdevp/ora/applmgr/comn/admin/out/WDEVP_wwwpdcdsoracd01/o51460123.out
Set Bursting parameters..
Temp. Directory:/tmp
[060211_015430388][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
[060211_015430412][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=51460123, user-variable:cp:language=en, user-variable:cp:responsibility=54886, user-variable.OA_MEDIA=http://wwwpdcdsoraca01.wyn.wyndhamworldwide.com:8018/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=51460123, user-variable:cp:locale=en-US, user-variable:cp:user=CDUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=51460124, user-variable:cp:org_id=6188, user-variable:cp:reportdescription=Separate Remittance Advice - BIP}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
--Exception
/tmp/060211_015430711/Remit_Advice_100454.pdf (No such file or directory)
java.io.FileNotFoundException: /tmp/060211_015430711/Remit_Advice_100454.pdf (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:523)
at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
I do not see any sub folder 060211_015430711 under /tmp folder.
Any help ...
Thanks
AnandHi,
Yes, i was able to fix the issue. The template associated with the bursting process needs to be in a single table. I had 2 separate tables due to which the program was completing with error. When i placed both those tables in a single table the issue was resolved.
Regards,
Anand
Maybe you are looking for
-
Dual screens with x1600 mobility & open source driver
Hi, I've been trying to get a dual screen setup with two truly independent screens (not the one giant screen that xrandr gives you), but I've been having some issues. The hardware I'm attempting this on is my macbook pro 2.1 with a 1440x900 internal
-
Gifting the iPod Touch to clients... don't want to loose pictures
We have purchased about 15 iPod touches that we would like to give to clients as gifts for the holidays. We would like to pre-load the touch with pictures from each client's projects that we have worked on (10-15 pics per client per iPod) and maybe p
-
How can I test a cFP-Vi included FP write- and read-Vi's without cFP-Hardware?
Can I simulate the cFP-Hardware? Without Hardware the Vi will generate an error: "the network module is not powerd on" and the Vi will not be started.
-
When I print a color in Photoshop, it looks perfect. The entire doc needs to be printed in InDesign. When I print from Indesign, the colors look wrong. Color setting are synchronized throughout CS6. I have set the profile for the paper and printer I
-
Hi, i just installed EE5 and the server. Everything lokk fine. But i got a problem with the port 8181. it look like i can connect to it but i do not see nothing and the page showed by the browser. I do not see nothing in the log file as well. So i am