Retriving tha multiple records at a time

Hi
I have a doubt regarding multiple records retriving at a time(for example 20 records) from my database into my jsp page.please give me the answer for this query

Similar Messages

Need to delete multiple records at a time

Hi,
My requirement is to delete multiple records at a time, i am using JDV11g and read only ADF table and rowSelection="multiple".
i have taken command button and invoking the below method.
RowKeySet rowKeySet = (RowKeySet)this.t1.getSelectedRowKeys();
CollectionModel cm = (CollectionModel)this.t1.getValue();
System.out.println("RowKeySet is: "+ rowKeySet.getSize());
for (Object facesTreeRowKey : rowKeySet) {
cm.setRowKey(facesTreeRowKey);
JUCtrlHierNodeBinding rowData =
(JUCtrlHierNodeBinding)cm.getRowData();
System.out.println("RowData is : "+rowData.getAttribute("ParamValue7"));
rowData.getRow().remove();
Please do need full

Hi,
I don't understand what you mean by "+Please do need full+" , so I am ignoring this part. Here's a link that shows you best practices
http://blogs.oracle.com/smuenchadf/examples/
See example 134.
Frank
ps.: I suggest you bookmark the link

How to save multiple records at a time?

Hi
Can any one help me to save the multiple rows using ADF 11g?
I have the requirement something like, Dragged the VO as a ADF table on the screen, Added the CreateInsert operation and commit operations on to the screen. User have the abliity to add multiple rows and then what is the best way to save all the records at a time instead of one by one.
the commit operations allows to store single row at a time.
Thanks

Actually, the commit action will commit all outstanding rows. Add a bunch of rows, fill in the data, press commit -> all of the rows are saved. Perhaps you could be more explicit in what you are trying and the results.
Best,
John

How can i update multiple records at same time in psa

Hi,
i need to modify certain column's value in psa. for one of InfoObject fix value i need to change to some other value, can i write some routine or any other way to do so quickly.
thnx

If you are in prod, its tough to write code to manipulate PSAs. First of all, you need to transport your Program. Also, if you make a mistake, you can potentially change other PSAs.
If you insist, get the name of the PSA. Go to RSA1, PSA tab. THere, right click on your infosource and select Delete PSA. DON'T DELETE anything in this screen. Just copy the Table name (look around, you will find it there). Now, go to SE16 and lok at the table contennts. If you give Req, data pack, etc, you can access multiple records. Now, write the program "carefully" to access and change records in this table.
There is another way, but this will work-out for you.
Uday-Ram Chamarthy

Saving multiple records at a time like the way it's done in picklist

I've to make a form using two T lists like the way it's done in picklist. The user can move elements either one by one or all at a time from one side to another and then save the record.
I've made the basic thing using two t lists. But i'm unable to write code to save the record.
What i've done is when the user moves one element from left to right i'm doing NEW RECORD then CREATE RECORD.
And when the user moves elements from right to left i do DELETE record.
But it's giving a lot of errors.
If anybody can help me it would be really great.
Thanks,
Abhishek.

Hi,
The easiest way to do this is to remove the TList & use multi record text items. U can adjust the border level of the items to have the look & feel of a List.
while u are using multi-record items u will be having full control of what the user selects..

Save required when adding record to avoid multiple record entries@same time

Hello, just wondering if anyone would be so kind as to help me out. I have a small problem that when a user is adding records to my form I want them to add one, then if they go on to add another at the same time (before commiting the first one) that they will be shown a prompt Which states something along the lines of "Before you add another record you must first save the first record, do you wish to do so" , yes will then commit the first record and allow the user to enter the second record, whilst cancel will not allow a second record to be entered.
If anyone would helpout i would be very grateful.

Hi
Here is my suggestion, the idea is to use a global variable to memorize the fact that a record has been created :
KEY-CREREC
begin
          if :GLOBAL.<BLOCK-NAME>RECORDCREATED = 'FALSE' then
               create_record;
               :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'TRUE';
          else
               message('Commit or delete before inserting a new record');
               message('Commit or delete before inserting a new record');
          end if;
end;
=====================================================================
KEY-DELREC
begin
     if :system.record_status in ('NEW','INSERT') then
          :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'FALSE';
     end if;
     delete_record;
end;
====================================================================
KEY-COMMIT
begin
     commit_form;
     :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'FALSE';
end;
====================================================================
POST-SELECT
:GLOBAL.<BLOCK-NAME>RECORDCREATED := 'FALSE';
====================================================================
It's a bit more complicated if you allow the user to go beyond the last record for creating a new record, as KEY-CREREC and KEY-DELREC are not triggered.
In this case, my suggestion is the following :
KEY-CREREC
begin
          if :GLOBAL.<BLOCK-NAME>RECORDCREATED = 'FALSE' then
               if :system.last_record = 'TRUE'then
                    next_record;
               else
                    create_record;
                    :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'TRUE';
               end if;
          else
               message('Commit or delete before inserting a new record');
               message('Commit or delete before inserting a new record');
          end if;
end;
===============================================================
WHEN-NEW-RECORD-INSTANCE
begin
     if :system.mode = 'NORMAL' then
          if :system.record_status = 'NEW' and :system.last_record = 'TRUE' then
               if :GLOBAL.<BLOCK-NAME>RECORDCREATED = 'TRUE' then
                    message('Commit or delete before inserting a new record');
                    message('Commit or delete before inserting a new record');
                    delete_record;
               end if;
          end if;
     end if;
end;
================================================================
KEY-DELREC
begin
     if :system.record_status in ('NEW','INSERT') then
          :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'FALSE';
     end if;
     delete_record;
end;
=================================================================
KEY-COMMIT
begin
     commit_form;
     :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'FALSE';
end;
===============================================================
WHEN-VALIDATE-RECORD
begin
     if :system.record_status = 'INSERT' and :system.last_record = 'TRUE' then
          :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'TRUE';
     end if;
end;
==================================================================
POST-SELECT
:GLOBAL.<BLOCK-NAME>RECORDCREATED := 'FALSE';
================================================================

A way to insert multiple records at a time

Hi All,
Suppose I have two tables A, B and C with following syntax.
A(aid,nameA)
B(bid,nameB)
C(aid,bid)(A mapping between A to B)
Now I want to insert into C with one value from A mapped to all values from B. But nameB has duplicate vales. So I want to map the aid only to unique bids in B. Can anyone shed some light?
Thanks In Advance,
JJ

Try
insert into C (AID, BID)
(select unique <x>, BID from B) ;where <x> is the AID value (assuming you have a specific AID you want to map to all available unique BIDs).
Edit: Sorry, misread your problem. A bit more complicated then (you need a rule to mitigate BID clashes, I use min()):
insert into C (AID, BID)
(select <x>, min(BID) from B group by NAMEB) ;If you need to map every AID to every BID with distinct NAMEB value, do something like this (cross-product):
insert into C (AID, BID)
(select AID, BID from A,(select min(BID) BID from B group by NAMEB)) ;-Sp
Message was edited by:
garfae

Retrive Multiple Records Into A database Block

hi, all
i would like to know if there is any document or references wich illustrait the way of retriving Multi records from a procedure built on database side into a database block using form 6i ??
My Problem is : i create a procedure in the database which retrive a multiple records and the variable from procedure (out) are the same value from Form side (in). but it always fetch the whole records at the same record position in the block as the cursor raised on . i found a way explian how to mintain a set or record using a record type and create a table of that record type , but still don't' know how deal calling the procedure from the form side .
Any advice of this issue will be greatfull and if sample of code provided will be better
Thanks in Advance
Regards
Omar

You can try something like this:
PROCEDURE POPULATE_BLOCK IS
cursor c1 is
SELECT <your column names>
FROM <your table name>
where <your where condition>
BEGIN
open c1;
go_block('<your block name');
first_record;
loop
fetch c1 into
:<your block name>.<your column name 1>,
:<your block name>.<your column name 2>,
etc,etc
exit when c1%NOTFOUND;
next_record;
end loop;
close c1;
first_record;
END;
so your code might actually look something like this:
PROCEDURE POPULATE_BLOCK IS
cursor c1 is
SELECT distinct
     a.pog_dept
     ,a.pog_number
     ,a.pog_level
     ,a.pog_id
,a.start_date
     ,a.transmit_date
,a.deactivate_date
     ,b.pog_description
FROM pog_stores_msi a, pog_master_msi b
where a.pog_dept = :b_main.bi_dept
and a.pog_number = :b_main.bi_pog_number
and a.pog_level = :b_main.bi_pog_level
AND A.POG_ID = :B_MAIN.I_POG_ID
and a.pog_dept = b.pog_dept
and a.pog_number = b.pog_number
and a.pog_id = b.pog_id;
BEGIN
open c1;
go_block('b_main');
first_record;
loop
fetch c1 into
:b_main.bi_dept
,:b_main.bi_pog_number
,:b_main.bi_pog_level
,:b_main.i_pog_id
,:b_main.i_start_date
,:b_main.i_transmit_date
,:b_main.i_deactivate_date
,:b_main.i_pog_desc;
exit when c1%NOTFOUND;
next_record;
end loop;
close c1;
END;
Hope this helps,
NumbNutz

How to Insert more than one record at a time- with fixed set of values in one field

Can someone guide as to how to insert multiple records at a time using ASP VBScript in Dreamweaver CS4 or ADDT.
If someone can guide then the exact problem is given below.
I have a MS access database with one table. The table has three fields. The first field is an autonumber field for ID number.
The second field contains string values- One out of 7 predefined values. One set of records consists of 7 records containing all the seven types of predefined values in fields no 1.
The third field is a numeric field and can contain integers.
I want that the user can enter data for the table using an ASP form in such a way that he enters one set of records at a time in one single screen. This way he will not have to remember that he has /has not entered all the seven set of values for the field no 1.
I am not creating fields with the 7 types of field1value as their names as it will increase the number of fields drastically.
Please help for dreamweaver ASP VBScript.

I have successfully inserted seven records in one form submit operation by looping through the command object execute method.
However, the data that is being inserted by the command object is repetition of the first record and the command object is not taking any data from the text boxes for the second record onwards. In this I had used the isert record behavious generated by DW CS4 and modified it to suit my requirement. However, the data inserted in the first row is getting repeated in all the seven rows.
Please help.
Also advise if there are any free dreamweaver server side validation extensions available.

How to Insert more than one record at a time

How to insert multiple records at a time?
If someone can advise on this, then the actual problem is described below:
I have a MS access database with one table. The table has three fields. The
first field is an autonumber field for ID number.
The second field contains string values- One out of 7 predefined values. One
set of records consists of 7 records containing all the seven types of
predefined values in fields no 1.
The third field is a numeric field and can contain integers.
I want that the user can enter data for the table using an ASP form in such
a way that he enters one set of records at a time in one single screen. This
way he will not have to remember that he has /has not entered all the seven
set of values for the field no 1.
I am not creating fields with the 7 types of field1value as their names as
it will increase the number of fields drastically.
Please help with inserting multiple records at a time.

I have successfully inserted seven records in one form submit operation by looping through the command object execute method.
However, the data that is being inserted by the command object is repetition of the first record and the command object is not taking any data from the text boxes for the second record onwards. In this I had used the isert record behavious generated by DW CS4 and modified it to suit my requirement. However, the data inserted in the first row is getting repeated in all the seven rows.
Please help.
Also advise if there are any free dreamweaver server side validation extensions available.

How to select multiple records in an ALV by REUSE_ALVGRID_DISPLAY

Dear all ,
I am displaying a report by REUSE_ALV_GRID_DISPLAY. I have used "box_fieldname" property to select a record in the alv . but i am not able to select more tha one record at a time . Can anyboby suggest me how will be i able to select more than one record at a time .
regards
amar

https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=47808545

Update Multiple records using NW CE WebDyn Pro 7.2 interface ITEMDETAILS

We are trying to use SAP Netweaver CE 7.2 and NetWeaver Design Studio 7.2 with the Web Dynpro application interfaces configured to connect to our MDM 7.1 SP06 repositories to develop web screens that allow our end users the ability to maintain MDM repository data without the use of DataManager.
Our first application was to be a simple one to show the business the benefit of SAP Netweaver. Itu2019s very easy to use the interfaces for SEARCH, RESULTSET, ITEMDETAILS, MATCH and MERGE if you plan to maintain one record at a time. We would like to update many records at the same time.
Using the configuration described previously, I find that I am able to select multiple records at one time using the RESULTSET interface and the Context folder of u201CSelectedRecordsu201D but I am not able to pass multiple records at one time to the context u201CIODatau201D used by the ITEMDETAILS interface and allow my end users to see and update multiple records at one time.
If I can pass multiple records from RESULTSET to ITEMDETAILS for display and update would you please provide me with an example of how I would do this in NetWeaver Design Studio for NW CE 7.2..
If I can NOT pass multiple records from RESULTSET to ITEMDETAILS for display and update, Would I then have to write my own wrapper application to read multiple records selected using the RESULTSET interface and the develop my own UPDATE view to display and update more than one record at a time. This would be time consuming since I would also have to write my own back out procedures and validation of update procedures that already happen within ITEMDETAILS. Do you happen to have any CE application examples that show how this is done for a NW CE MDM repository that I can see? The current documentation u201CHow to Build Web Applications Using MDM Web Dynpro Components. pdfu201D falls short in the area of updating multiple records.
Thank you in Advance

Bugs aside, if it's VERY noisy, that might just be the out-of-sync problem (something I'm very familiar with now).
Search the forum for "aggregate sync" and you should get some clues, if this is indeed the problem.
Short of it is, you need to sync the two devices together. Easiest way seems to be to connect the two devices via S/PDIF and set Clock Source to S/PDIF for the "slave" device (set in Audio Midi).
You can also just set the Clock Source as the "master" device in the drop down, bypassing the need for the S/PDIF cable altogether, but I haven't tried this myself.
Macbook Pro CD / iMac C2D Mac OS X (10.4.8)

Edit and update multiple records in JSP buisness components

Hi everybody,
I'm building BC4J components using entities and views and JSP buisness components.
how can I edit and update multiple records
at a time in the jsp file
Note using the databean
"oracle.jbo.html.databeans.EditCurrentRecord"
one can view one record at a time
thank you

do you have a sample code? thanks
Hi
There are several options. One of them could be
1) use <input name=rc[j] value="..."> instead of
display a raw text
2) parse parameters in doPost method of your servlet
to update appropriate values.
3) Make a empty row enable inserts
Regards
Jan

Edit multiple records with BC4J and Struts-JSP

Hi everybody,
I'm building BC4J components using entities and views and JSP business components. How can I edit and update multiple records at a time with Struts-Jsp ? Have someone already an example (with JSP and ActionForm code) ?
thank you

Hi,
Nobody have an example ? Is it so difficult ?
Thanks

Multiple records insertion

Hi,
How to insert multiple records at a time using stored procedure.
Please give me example.
Regards,
Kiran

Kiran,
If you want to use "variable-number-of-parameters", you need to use array:
http://stackoverflow.com/questions/980324/oracle-variable-number-of-parameters-to-a-stored-procedure?tab=votes#tab-top
Best Regards,
Gokhan Atil
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

Retriving tha multiple records at a time

Similar Messages

Maybe you are looking for