Edit multiple records with BC4J and Struts-JSP

Hi everybody,
I'm building BC4J components using entities and views and JSP business components. How can I edit and update multiple records at a time with Struts-Jsp ? Have someone already an example (with JSP and ActionForm code) ?
thank you

Hi,
Nobody have an example ? Is it so difficult ?
Thanks

Similar Messages

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

[URGENT] Performance problem with BC4J and partioned data

Hi all,
I have a big performance probelm with BC4J and partitioned data. As as partitioned table shouldn't have a primary key like a sequence (or something else) my partitioned table doesn't have any primary key.
When I debug my BC4J application I can see a message showing me "ignoring row with no primary key" from EntityCache. It takes a long time to retrieve my data even if I use the partition keys. A quick & dirty forms application was multiple times faster!
Is this a bug in BC4J, or is BC4J not suitable for partitioned data? Can anyone give me a hint what to do, do make the BC4J application fast even with partitioned data? In a non-partitioned environment the application works quite well. So it seams that it must be an "error" somewhere in this part.
Thanks,
Axel

Here's a SQL statement that creates the table.
CREATE TABLE SEARCH
(SEAR_PARTKEY_DAY              NUMBER(4)        NOT NULL
,SEAR_PARTKEY_EMP            VARCHAR2(2)      NOT NULL
,SEAR_ID                     NUMBER(20)       NOT NULL
,SEAR_ENTRY_DATE             TIMESTAMP        NOT NULL
,SEAR_LAST_MODIFIED            TIMESTAMP             NOT NULL
,SEAR_STATUS                 VARCHAR2(100)    DEFAULT '0'
,SEAR_ITC_DATE               TIMESTAMP        NOT NULL
,SEAR_MESSAGE_CLASS          VARCHAR2(15)     NOT NULL
,SEAR_CHIPHERING_TYPE        VARCHAR2(256)
,SEAR_GMAT                   VARCHAR2(1)      DEFAULT 'U'
,SEAR_NATIONALITY            VARCHAR2(3)      DEFAULT 'XXX'
,SEAR_MESSAGE_ID             VARCHAR2(32)     NOT NULL
,SEAR_COMMENT                VARCHAR2(256)    NOT NULL
,SEAR_NUMBER_OF              NUMBER(3)        NOT NULL
,SEAR_INTERCEPTION_SYSTEM    VARCHAR2(40)
,SEAR_COMM_PRIOD_H           NUMBER(5)        DEFAULT -1
,SEAR_PRIOD_R                  NUMBER(5)        DEFAULT -1
,SEAR_INMARSAT_CES           VARCHAR2(40)
,SEAR_BEAM                   VARCHAR2(10)
,SEAR_DIALED_NUMBER          VARCHAR2(70)
,SEAR_TRANSMIT_NUMBER        VARCHAR2(70)
,SEAR_CALLED_NUMBER          VARCHAR2(40)
,SEAR_CALLER_NUMBER          VARCHAR2(40)
,SEAR_MATERIAL_TYPE          VARCHAR2(3)      NOT NULL
,SEAR_SOURCE                 VARCHAR2(10)
,SEAR_MAPPING                VARCHAR2(100)    DEFAULT '__REST'
,SEAR_DETAIL_MAPPING         VARCHAR2(100)
,SEAR_PRIORITY               NUMBER(3)        DEFAULT 255
,SEAR_LANGUAGE               VARCHAR2(5)      DEFAULT 'XXX'
,SEAR_TRANSMISSION_TYPE      VARCHAR2(40)
,SEAR_INMARSAT_STD           VARCHAR2(1)
,SEAR_FILE_NAME              VARCHAR2(100)    NOT NULL
PARTITION BY RANGE (SEAR_PARTKEY_DAY, SEAR_PARTKEY_EMP)
PARTITION SEARCH_MAX VALUES LESS THAN (MAXVALUE, MAXVALUE) MIRA4_SEARCH_EVEN
);of course SEAR_ID is filled by a sequence but the field is not the primary key as it would decrease the performance of partitioned data.
We moved to native JDBC with our application and the performance is like we never expected to be!

How to send multiple records in file2file and file2db or all scenarios//

I'm able to send single record for file2file and file2db,
how to send multiple records in file2file and file2db or all scenarios//
what should add or make changes for dis.

1 put Occurance 1 to Unbounded in data type of IR
2 In the test tag of message mappings in IR,select one node and use "duplicate subtree" in its context menu
After that,you can download the test data in XML format with the button "save document source"
for example:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ZFileDemo xmlns:ns0="http://hand-china.com/mm/po_01">
- <Item>
<ItemNo>1</ItemNo>
<Matnr>2</Matnr>
<Text>3</Text>
</Item>
- <Item>
<ItemNo>4</ItemNo>
<Matnr>5</Matnr>
<Text>6</Text>
</Item>
</ns0:ZFileDemo>

Adding Multiple Records with Express

Hello All,
We have a CRUD application written in Express 2.0 that allows users to
enter part numbers and associated information. Our part numbers are
structured as a prefix, alpha, suffix and 'M' or 'P' number variations :
1 AB 2 P3 for example. We have provided functionality to allow the
user to enter multiple P or M variations all at once, say 1 AB 2 P1 thru
P100,
using a dialog box where they enter the starting number, ending number
and step.
The problem comes in the AddRecordsToSave method.
This method correctly builds the array of BusinessClass needed to be
passed to the Save method, however, the Save method adds only the
initial record (the one from the original Express data entry screen)
to the database.
I have traced the problem to the BusinessClient.Update method called
from
Save. I believe I am missing some query information that should be
built into
AddRecordsToSave, but I am completely unsure of how to provide this.
As you can see in the attached code, we are using the LogAttr method to
post
changes. Apparently this is not enough. What am I missing here?
The InstanceStatus key of the added records is set to ST_EMPTY by
default....
I have tried forcing this to ST_UPDATE, only to receive an error that it
should
be ST_EMPTY......?? I am confused. If anyone can shed some light on this
for me,
I would appreciate it. Thanks for any help.
Scott Guman E-mail: [email protected]
IRM Analyst II Phone: (610) 709-2144
Mack Trucks, Inc. Fax: (610) 709-4713
Allentown, PA 18105

Hi There,
If attr is not specified in your LogAttr() call, the
BusinessClass
will be put in the update state but not attributes will
be logged.
That may be the reason why only the displayed record(
fetched from
the DB ) is getting logged, but not the new records.
I think you should use ATTR_SIMPLE with LogAttr. This
will cause
all the attributes to be logged and a proper query to
be built
to insert the newly created record. I am no Express
Guru,
but it works fine for me. Also, try not to modify
InstanceStatus directly.
Sometimes it might lead to inconsistencies. The online
help
The Add Records to Save example really helps.
Good luck!
Ajith Kallambella. M.
Forte Systems Engineer,
International Business Corporation
-----Original Message-----
From: Scott Guman [SMTP:[email protected]]
Sent: Wednesday, September 16, 1998 9:34 AM
To: 'Forte Users'
Subject: Adding Multiple Records with Express
Hello All,
We have a CRUD application written in Express 2.0 that
allows users to
enter part numbers and associated information. Our
part numbers are
structured as a prefix, alpha, suffix and 'M' or 'P'
number variations :
1 AB 2 P3 for example. We have provided functionality
to allow the
user to enter multiple P or M variations all at once,
say 1 AB 2 P1 thru
P100,
using a dialog box where they enter the starting
number, ending number
and step.
The problem comes in the AddRecordsToSave method.
This method correctly builds the array of BusinessClass
needed to be
passed to the Save method, however, the Save method
adds only the
initial record (the one from the original Express
data entry screen)
to the database.
I have traced the problem to the BusinessClient.Update
method called
from
Save. I believe I am missing some query information
that should be
built into
AddRecordsToSave, but I am completely unsure of how to
provide this.
As you can see in the attached code, we are using the
LogAttr method to
post
changes. Apparently this is not enough. What am I
missing here?
The InstanceStatus key of the added records is set to
ST_EMPTY by
default....
I have tried forcing this to ST_UPDATE, only to receive
an error that it
should
be ST_EMPTY......?? I am confused. If anyone can shed
some light on this
for me,
I would appreciate it. Thanks for any help.
Scott Guman E-mail:
[email protected]
IRM Analyst II Phone: (610) 709-2144
Mack Trucks, Inc. Fax: (610) 709-4713
Allentown, PA 18105
<< File: AddRecordsToSave.txt >>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Can you edit CRM records with {Tag_edit}

Hi,
I 'm wondering if I can edit my records with {tag_edit)
I can edit the web apps , but when I include the {module_firstname} and edit it. It wont edit the record in CRM.
So I wonder if there is way to do it?
I don't think it will be through web app.
What I'm aiming for is that web user can edit their own information throught a secure zone.
For example. I have created website , with back end. Custom back end. Once the user is registered. He can alter the details.
With out loggin in to admin panel and edit the record in CRM.
Any suggestions would be appreciated.
Thanks
Kind Regards
Jiri

Hi Matt,
Thank you, that what I needed.
Next question.
Could you point me in a right direction. How would I be able to make progress bar? with 5 stages and when I hover over it would tell me some informations.
I have thought of web app. But i'm not too sure now.
Any help will be appreciated.
Thanks
Kind Regards

MOVED: Multiple Displays with AGP and ON-Board

This topic has been moved to AMD SocketA based board.
Multiple Displays with AGP and ON-Board

Glen i just wanted to test try something new.
I want to know if there are anything i should know about my board?
Do you think the KM4M-V is a good board to have?

Multiple records with select option

i have to use select option in selection screen, which wl take the multiple values but that select option wont act as a range, the select option is a session name from sm35, the table from where data is retrieved is APQI, i have used a parameter before using select option ,like:
selection-screen begin of line.
parameters: P_grpid like apqi-groupid.
select-options: s_grpid like apqi-groupid.
selection-screen end of line.
AT-SELECTION SCREEN ON VALUE REQUEST FOR p-GRPID. " previous situation
{the code starts
FM F4 selection is called}
AT-SELECTION SCREEN ON VALUE REQUEST FOR S_GRPID-low. " CURRENT situation
FM F4 selection is called}
now when i give data in slection screen for s_grpid-low then it works as a parametr, but it doesnt take multiple values at s_grpid when i have alos mentioned the same for s_grpid-high.
Please tell me how to achive multiple records with select option, or u can also send a sample code if you have..
Thanks
Swarnali

Hello Swarnali,
You need to fill internal table of select-option once you got into the event AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
so sudo code will be:
AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
Select data from table.
so_carr-LOW = value
append so_carr.
You can also use NO INTERVAL to suppress the so_carr-HIGH value on selection screen.
Thanks,
Augustin.

Demo applications with BC4J and JClient

Are there any demo applications with BC4J and JClient, which go beyond the one frame samples, tutorials and how to's?
This would deliver a better insight to develop a complete application.
Bye
Holger

Thanks,
the Virtual Shopping Mall sample is quite not I have searched for, because it is primarily an Web application and I am searching for an JClient application without Application Server, but it is a beginning.
Bye
Holger

Loading Hex Files with multiple records with each line starting with : record marker, how do I load this hex file into a front panel table ? thanks in advance, Jeff.

I have written a routine that loads a Hex file, checks for record marker,length,address etc then loads the data into a table on front panel. However, my routine only loads single record hex files. I need to be able to load multiple record files, I need to identify the ':' colon record marker start for each record in the hex file, I just can't see how to loop my routine so that all records with ':' prefix marker are loaded.

Jeff,
I'm not exactly sure of what you are trying to do. Is it possible you could post your code, or a screen shot of the diagram in question, so that I can get a better understanding, and possibly offer some assistance?
I am familiar with hex files, but not with the : marker separating records. This may be able to be solved with simple text parsing, and as I am not familiar with how you are retrieving and/or displaying the files, I require more information.
Thanks

Syncing multiple iPhones with iCal and contacts

My roommate just bought an iPhone and synced it for the first time with my iMac, but now he has all of my contacts and calendar appointments and none of his own. Do iCal and Contacts support multiple profiles? Is it possible for him to store his contacts on my iMac with iLife and sync without interfering with my contacts?
Sorry if this is a noobish question or if it's already been answered. I looked and couldn't readily find any topics that matched this question.
Message was edited by: k2tha-izzo

Your roommate will need to have all of his contacts in a specific group, as well as all of his calendar appointments in a specific calendar.
In iTunes, go to the info tab on the iPhone in iTunes and have it only sync that calendar/group.

Problems with Apache and custom JSPs

Hi
We've made an application on top of IFS, using JWS in our test envirnment. Just before making some stress tests, I'd like to try it using Apache. We're currently having two problems:
1) I switch to the apache configuration running ifsconfig and not selecting JWS. When I try to access the ifs using http://host/ifs/files, everything goes well except that the "logout" icon doesn't appear. I did a little research and found out that the link goes to /ifs/webui/images/logout.gif. This gives an error in mod_jserv.log, like this one:
[07/06/2001 22:54:20:315] (ERROR) ajp12: Servlet Error: ClassNotFoundException: webui
It seems it's trying to find a "webui" class, since in ifs.properties every url that begins with /ifs goes to jserv.
I don't know if this is a know problem or what should I've check...
2) This one is more important. We're using some custom JSPs, which we use to edit the properties of some types of documents. Basically, when the user clicks over a file one of our JSP appears. These JSPs call a bean to do some processing, passing the HttpRequest as a parameter. The problem is that when using JWS we get the "path" request variable like in path=/%3A29464
However, when using Apache we get path=/ifs/files/%3A29464 ( and afterwards we get an exception because the ifsSession.getPublicObject method doesn't work).
Any hints on this? One way could be to check if the path begins with /ifs/files, but that's not really nice.. and besides I could have the same problem in some other parts.
It's kind of urgent....
Thanks
Ramiro
null

Hi,
The answer to your path problem is that you can make use of API to find out the current path so that it works both with Apache and with JWS. Follow the steps
1. import the oracle.ifs.adk.http package in your custom jsps
<%@ page import = "oracle.ifs.adk.http.*" %>
2. Then within your jsp use the method
getIfsPathFromJSPRedirect
<%= oracle.ifs.adk.http.HttpUtils.getIfsPathFromJSPRedirect(request) %>
This will give you the current path of the object on which you clicked on and which initiates the custom jsp.
You can look at the CMS application which has made use of this API. URL is
http://otn.oracle.com/sample_code/products/ifs/sample_code_index.htm
Choose, sample applicatin -> Content Management system.
Hope this helps
Rajesh
null

Editing MULTIPLE images with lightroom 2 corrections in CS3

Does anyone know how to send multiple images with LR2 corrections to CS3
for further editing? If I select multiple images in LR2 and click photo/edit in/photoshop cs3 only one image opens in photoshop. If I could send more than one image at a time it would greatly speed up my workflow.
Thanks

It works for me when I highlight multiple images, right-click on one of them, choose edit in Photoshop. If this isn't working for you, is it possible that your Photoshop screen mode is such that you have to switch images using the Window option on the menu?

Delete multiple records with MDM WebService

Hi everyone!
I'm using an MDM Web Service with delete functionality. It identifies records to be deleted either by internal ID or by defined field value. The point is that i need this web service to delete all records with one specific value in specific field (lets say all the records with value "hidden" in field "VISIBILITY").
But when I try to map value "hidden" of the field "VISIBILITY" to the web service input in BPM it says in tracing that there are multiple fields with that value in the table (certainly there are) and that it can't process them. Cause it doesn't support multiple processing. Is there any way to do that?
Thanks in advance,
Peter

Hi Peter,
I guess you can do that if you first retrieve the internalIDs of the to be deleted records:
Do a search for the records with the field value.
Then you will receive the internalIds of them.
Then you can put these internalIds to the delete records webservice. Each in a new element of the record identification.
I hope this helps!
Best regards,
Stefan Brauneis

Display multiple records with CSS

PHP MySQL
I have a MySQL table with several columns and multiple
records... it is easy
to display these records in a <table> using the repeat
record server
behavior applied to the <tr> that displays the records.
I would like to do this with CSS and eleminate
<table>'s
My question is can this be done displaying the records in a
<div> using the
repeat record server behavior?
Or is this just one of those things that a <table> is
required?
Jeff

Displaying rows of data is actually the reason tables were
originally
invented. :)
You need a table with the number of columns for your data and
two rows. The
first row is for the column headers. The second row is for
the PHP
placeholder that will be replaced with data. Apply the repeat
region to
this second row either for all rows or the number of rows you
desire to
display on one page .. in which case you would also use
recordset paging.
(previous, next)
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Jeff" <[email protected]> wrote in message
news:erindt$i70$[email protected]..
> PHP MySQL
> I have a MySQL table with several columns and multiple
records... it is
> easy to display these records in a <table> using
the repeat record server
> behavior applied to the <tr> that displays the
records.
>
> I would like to do this with CSS and eleminate
<table>'s
> My question is can this be done displaying the records
in a <div> using
> the repeat record server behavior?
> Or is this just one of those things that a <table>
is required?
>
> Jeff
>

Edit multiple records with BC4J and Struts-JSP

Similar Messages

Maybe you are looking for