Return what ? IS IF UPDATE (Column_name) parameter in a trigger definition will return TRUE ?

The IF UPDATE (Column_name) parameter in a trigger definition will return TRUE in case of an INSERT statement being executed on the triggered table: 
Which option is correct ?
a. YES
b. NO
c. It returns TRUE only if an UPDATE query is executed
d. Both b and c

See MSDN: UPDATE() (Transact-SQL)
"Returns a Boolean value that indicates whether an INSERT or UPDATE
attempt was made on a specified column .."
Olaf Helper
[ Blog] [ Xing] [ MVP]

Similar Messages

  • How to find out what the latest update is for something from apple's site?

    i've never been able to do this, and has been a recurring problem for many years:
    how can you, using apple's web site -- presumably the support or downloads section -- find out what the latest update for/of a certain product is?
    without going into the details, the software update app is of no use to me.
    for example, i have a airport extreme base station 54 mbps. how do i go about finding out what it's latest software is? do such products not have a web page which has the latest update linked to from it?
    why is it so hard, impossible i find, to find out what the latest software is?
    any pointers much appreciated. (i'm not particularly looking for the answer to "what't the latest update for a airport extreme base station 54 mbps?" but a general method for finding out the latest update for anything using apple's web site)
    thanks very much.

    If you use the Advance Search function:
    http://search.info.apple.com/
    you can filter results to give downloads for the search words airport extreme base station. The return will be in date order from newest to oldest. Yo ucan also designate word pairs of groups to narrow the search.

  • TS1702 I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?

    I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?

    Well, to paraphrase the old line, "What're you gonna believe, that email or your own lying eyes?"
    The first thing I'd recommend trying is to power down your iPad (press & hold Sleep/Wake until the red OFF slider appears, then slide it to shut down), and then boot it back up and try again. You're resetting a bunch of state signals by doing that and this simple action (the first of a series recommended by Apple in your Users Guide) will quite often clear up these sorts of problems.

  • What type of out put parameter should i have to pass here?

    Hi all,
               I'm working on a custom function module. In that i have to call a standard function module "SAPWL_READ_STATISTIC_FILES".
    This standard FM is returning the values in changing parameter "ALL_STATS" of type "SAPWL_ALLSTATS". SAPWL_ALLSTATS is a structure in a pool structure "sapwl".
    My problem is when i'm testing the standard FM with some input parameters its throughing some values into changing parameter "ALL_STATS", but in my custom FM for the same standard FM i'm passing the same values its not throughing any values into that changing parameter "ALL_STATS".
    So can anybody check this standard FM and suggest me how to declare the output parameter type and pass? Its a pool structure there i'm getting problem to define it. Help me out please.
    Thanks & Regards
    Naidu

    Hello Naidu
    Using the sample report ZUS_SDN_READ_STATISTICAL_FILES I can fetch a couple of records from the system (ERP 6.0).
    If your selection does not work within your custom function module then perhaps there is some conversion problem with the input data (keep in mind that the SAP-GUI takes care of all conversions, e.g. a date '10.11.2008' is automatically converted into '20081110').
    *& Report  ZUS_SDN_READ_STATISTICAL_FILES
    *& Thread: What type of out put parameter should i have to pass here?
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1119462"></a>
    REPORT  zus_sdn_read_statistical_files.
    TYPE-POOLS: sapwl.
    DATA: gt_stats    TYPE STANDARD TABLE OF sapwl_statrec.
    DATA: gd_msg      TYPE bapi_msg.
    START-OF-SELECTION.
      CALL FUNCTION 'SAPWL_READ_STATISTIC_FILES'
        EXPORTING
          read_client                 = syst-mandt
    *     READ_TIME                   = '001000'
    *     READ_TIME_DELTA             = '000200'
    *     READ_EXCLUDE_USERNAME       =
    *     READ_START_DATE             = SY-DATUM
    *     READ_START_TIME             = ' '
    *     READ_USERNAME               =
    *     READ_WORKPROCESS            = 'FFFF'
    *     STATISTIC_FILE              = ' '
    *     AS_STATISTIC_FILE           = ' '
    *     NO_BUFFER_FLUSH             = ' '
    *     WAIT_FACTOR                 = 150
    *     INCLUDE_APPL_STAT           = ' '
    *   IMPORTING
    *     PROBLEMS                    =
    *     TOTAL_RECS_READ             =
    *   TABLES
    *     PROTOCOL                    =
    *     RFC_RETURNS                 =
    *     SERVER_LIST                 =
        CHANGING
          all_stats                   = gt_stats.
      DESCRIBE TABLE gt_stats.
      WRITE syst-tfill TO gd_msg NO-ZERO.
      CONDENSE gd_msg NO-GAPS.
      CONCATENATE gd_msg 'Records found' INTO gd_msg
        SEPARATED BY space.
      MESSAGE gd_msg TYPE 'I'.
    END-OF-SELECTION.
    Regards
      Uwe

  • Updated to iso7 and now credit card will not work with itunes account. What is going on?

    When I updated to iso7 my credit card information for my iTunes account is no longer valid. Tried to update my credit card information and it will not allow my current and valid credit card to be used and will not accept any of my other valid credit cards to be used.
    What is going on? Am I missing something or is apple hijacking my paid for accounts again?

    Hi paul.labiche,
    When having iTunes Store connectivity issues, the following articles provide the best solutions:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thanks,
    Matt M.

  • HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    Cconnect it to your computer with the latest version of iTunes installed.

  • I have an iphone 4 and after updating it to the ios5 software, it will not allow me to activate nor allow me to leave the setup page. i cannot even restore it. does anyone know what to do?

    i have an iphone 4 and after updating it to the ios5 software, it will not allow me to activate nor allow me to leave the setup page. i plugged it into itunes and it is stuck there too... i cannot even restore it. does anyone know what to do?

    I have had this same issue but thankfully fixed it. Follow he steps below:
    Sync your iPhone with you iTunes therefore your info is backed up. Unplug your phone.
    Go to Settings > Reset > Erase All Content and Settings
    Once your phone has reset and come back on answer the question until it asks if you want to back up from itunes Click this then plug your phone in.
    After everything has sync'd back to your phone everything should work fine.
    Hope this helps.

  • What are the Update tables?

    In LO Delta scenario, Data posted parallel into document tables and update tables. What are the Document tables? What are the Update tables?
    Give example for Application 11, which is document tables, and update tables?

    Hello Mannev,
    Document tables are the actual application tables where the data is posted when you post a document in R/3.
    Examples can be MSEG, VBRK etc.
    Update tables are the intermediate tables which store data read from document tables. The V3 runs collects deltas in form of LUWs from these update tables and populates the delta queues.
    hope this helps..
    thanks,

  • HT201303 I received this update from Apple, but I have no record of altering anything, can you tell me what has been updated, who updated anything, and how was it done?  Hello,  The following information for your Apple ID was updated on 03/22/2014:  Phone

    I received this  update from Apple, but I have no record of altering anything, in particular telephone numbers, can anyone tell me what has been updated, who updated it, and how was entry made to my account?
    Hello,
    The following information for your Apple ID was updated on 03/22/2014:
    Phone number(s)
    If these changes were made in error, please CLICK HERE,  to Cancel this changes withing 24hours..
    This is an automated message. Please do not reply to this email. If you need additional help, visit Apple Support.
    Thanks,
    Apple Customer Support

    This is a user to user forum, so no one here can provide an answer.  You should contact iTunes Support directly.
    Here's how you can do that:  http://www.apple.com/support/itunes/contact/

  • HT3775 How do I know what kind of update I need to play downloaded videos?

    Need to know what kind of update i need to play downloaded vidos

    Try using VLC (just search for it on Google). It's an open source video player that will play most downloadable video files.

  • Trying to find what program is updating a table

    Hello,
    This does not really fall under ABAP but I didn't know where to put it. I have been trying to find out what process is updating my class. The transaction code is CL02 and some process is re-arranging the characteristics of a certain class.  In table CDHDR I can see the change documents. The user is always BATCHUSER, and it happens approx every 2 hours but it can vary quite a bit. The charactersitics are rearranged in exactly the same way each time. I have checked all the batch jobs, there are no workflows or idocs triggered/created at the same time, I have set RFC traces and SQL traces but I still cannot track down the process that is making these changes. If anybody has any ideas for me to try I would be very grateful.
    Thanks,
    Ashley

    there was an idoc that kept being processed and was updating the class.

  • Please tell me what is v3 update in extraction ,pabitra

    Hi sap Gurus,
                   please tell me what is v3 update in extraction ?How we use
    in extraction over real time scenarios.Advantages and disadvantages
    Definitely points will be awarded.
    advance thanx
    regards
    pabitra
    Edited by: pabitra mohanty on May 28, 2008 4:18 AM
    Edited by: pabitra mohanty on May 28, 2008 4:18 AM

    Hi Pabitra,
    Please go through the blog by Roberto on this:
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    and even let me present you in breif:
    V1 - Synchronous update
    V2 - Asynchronous update
    V3 - Batch asynchronous update
    These are different work processes on the application server that takes the update LUW (which may have various DB manipulation SQLs) from the running program and execute it. These are separated to optimize transaction processing capabilities.
    Taking an example -
    If you create/change a purchase order (me21n/me22n), when you press 'SAVE' and see a success message (PO.... changed..), the update to underlying tables EKKO/EKPO has happened (before you saw the message). This update was executed in the V1 work process.
    There are some statistics collecting tables in the system which can capture data for reporting. For example, LIS table S012 stores purchasing data (it is the same data as EKKO/EKPO stored redundantly, but in a different structure to optimize reporting). Now, these tables are updated with the txn you just posted, in a V2 process. Depending on system load, this may happen a few seconds later (after you saw the success message). You can see V1/V2/V3 queues in SM12 or SM13.
    V3 is specifically for BW extraction. The update LUW for these is sent to V3 but is not executed immediately. You have to schedule a job (eg in LBWE definitions) to process these. This is again to optimize performance.
    V2 and V3 are separated from V1 as these are not as realtime critical (updating statistical data). If all these updates were put together in one LUW, system performance (concurrency, locking etc) would be impacted.
    Serialized V3 update is called after V2 has happened (this is how the code running these updates is written) so if you have both V2 and V3 updates from a txn, if V2 fails or is waiting, V3 will not happen yet.
    BTW, 'serialized' V3 is discontinued now, in later releases of PI you will have only unserialized V3. (This is explained nicely in the weblog).
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    Cheers,
    Habeeb

  • Infoview prompts for database logon screen when updating dynamic parameter

    I have already set up initial database ID/PW for the report in CMS, but when I I tried to update my parameter to schedule the report, it is requiring the user to enter database ID/PW again........Is there a way to set this up so that the user can bypass this step since it is quite annoying?
    Thanks.

    Is your lov created Business View Manager? If it is, you can store the userid and password in the data connection your business view is based on.
    1) Start Business View Manager. Close the default screen that appears.
    2) Click View > Repository Explorer on the menu bar.
    3) Expand the Dynamic Cascading Prompts folder. Locate the "Data Connection" for the appropriate dynamic parameter. It will be in the form of <parameter_name>_DC (i.e. it will have the name of the parameter and then '_DC').
    4) Double-click the Data Connection. "Property Browser" will appear.
    5) Type the database user name and password in that Property Browser.
    6) Set the Runtime Prompt to Never Prompt.
    7) Save the changes to the Data Connection.
    The prompt for database logon information will no longer appear when changing parameter values.
    Hitomi

  • I updated Firefox but now it says it will not work b/c the application may be damaged or incomplete. What can I do. It worked perfectly before I updated the app.

    I updated Firefox but now it says it will not work b/c the application may be damaged or incomplete. What can I do. It worked perfectly before I updated the app.

    Hello, terrygav. 
    I would recommend processing a reinstall of Mavericks.
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/PH13871
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason H.

  • What do I update to after Mac OSX 10.5?

    My mac book is still running on the OSX 10.5.8, but I've been having problems with safari shutting down when I watch t.v or movies. What should I update to next?

    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It's been pulled from the online store, so you have to call Apple to buy it, last I heard, but quick, call before it's gone!
    Call Apple 1-800-MY-APPLE
    You have to get 10.6.8 first to go even higher to 10.7 or 10.8

Maybe you are looking for