TS1702 I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?
I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?
Well, to paraphrase the old line, "What're you gonna believe, that email or your own lying eyes?"
The first thing I'd recommend trying is to power down your iPad (press & hold Sleep/Wake until the red OFF slider appears, then slide it to shut down), and then boot it back up and try again. You're resetting a bunch of state signals by doing that and this simple action (the first of a series recommended by Apple in your Users Guide) will quite often clear up these sorts of problems.
Similar Messages
-
Updated to IOS6 and now my apps will not update on the Ipad2. I have to delete them and then re-install. But I have several hundred apps and this is cumbersome. Seems the new software is too buggy. I am telling people not to update software yet.
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
I've changed iPad carriers but iTunes will not update the carrier settings,
I've changed iPad carriers but iTunes will not update the carrier settings, stating that the requested resource could not be found. Does anyone know how I can download the ipcc file and force an update.
Your iPad may already have the latest carrier settings, especially if you have updated to iOS 4.3.3.
-
I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton -
I have updated my iOS and now my hotmail will not verify my password through apple mail app. I have reset password - tried new password and old password and it still gives me password incorrect. Hotmail works fine on Mac. Has anyone had this difficulty and been able to resolve it?
Did you try deleting the mail account, then adding it back? I've read a lot of times that is what needs to happen in order for it to work properly.
-
I have an iPod 2nd gen . I have been trying to get an update to the software, but it will not update. Current version is 4.2.1 Trying to update it so I can use facebook on it, but with this version facebook will not work. Can someone help with this please.
Ipod touch 2 g does not go above ios 4.2.1 and the facebook update needs 4.3 , so there is no way to update the app.
-
My iPad is frozen with the message not enough storage. Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off. How do I get past that message?
Delete some apps, files, photos, videos, movies, etc to free up some space.
How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
Cheers, Tom -
I have OS X 10.6.8 on my mac and have just downloaded 10.7.4 (needed for imovie 11) but it will not update. What has happened to the downloaded update?
When you downloaded Lion from the Appstore (and paid 29$) you have 10.7.4.
After the download you will find it in the Applications folder: that is the installer ! The installer vanishes when used, thus if you want to make an installer disk (to avoid a later redownload), you should do it before you run this installer. You can use "Lion Diskmaker" for that (use a 8GB USB stick), http://www.macupdate.com/app/mac/39701/lion-diskmaker/ -
I have just downloaded an iBook but it is not opening how do I get a refund
I have just downloaded an iBook but it is not opening how do I get a refund
Have you tried deleting it from the iBooks app and redownloading it via the Purchased link in the ibookstore in the iBooks app ? Re-downloading.
If you have the same problem after re-downloading it then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that book and use the 'Report a Problem' link. -
My ipad air will not allow me to access since I downloaded the new version 8.3 operating software
When I try to open the slide to upgrade screen comes up and then the request for passcode and then the apple loading screen then Hello then update completed screen I select continue another apple with line showing progress then asking for password enter then Message and Face time a screen
then a get started screen and then another apple with line showing progress and then my opening screen shows for a split second and then back to the apple with progress for a split second and then it shuts down. -
I purchased elements 11 - I have installed on work computer but it will not allow me to install on laptop stating the code has already been used. Can anyone help me install on laptop please?
No, I have the music I want to move from the laptop to the phone selected. Then I go under file, devices, and try to click sync but it is not available to click.
-
I am trying to reset my apple id under icloud account information on the original pc that I set the account up. I have changed email addresses now and would like to change to new address. I have gone through the steps on changing apple id and password and have my phone hooked up to pc but it will not change over to the new address and password thus I can not order any apps or use icloud. Help!
Go to Settings, and then turn iMessage and FaceTime on if they are off. If they are on, then turn them both off, restart the phone, then turn them back on.
Go back to Settings > iCloud. Whether the current or old email address is displayed there, try your current password. -
I have just updated my iphone to ios6 and now my music will not update?
I have only heard bad things about the ios6 update, hence why i have been postponing up dating it.
so i finally do update it and now this?!
When i re sync the music it will not update at all :/
if any one knows how to help it would be muchly appreciatedSee if this helps
http://support.apple.com/kb/TS1559
if not, it is a hardware failure. Contact Genius bar for evaluation and possible replacement. -
I have a song that shows in the playlist but suddenly will not play. Itunes thinks that last time it was played was the time it "shorted" out and did not play. How do I get it back? Thanks.
Try deleting the entries from the Movies part of your library (i.e. where you are trying to play them) and see if you get the cloud symbol next to them for re-downloading in the Purchased link
As your screenshot shows your account id I've asked the hosts to remove it -
I'm trying to use my iPad mini for the first time with a previous apple ID and password but it says "iTunes is not working try again"...it allowed me to download an app on my iPhone using the same apple ID & password but all my apps are in "Waiting Status" on my iPad mini because it says "iTunes is not working"...PLEASE HELP ME NOW!!!
Previous user installed iOS 7 beta on that iPhone.
Take it back and get your money returned. You
are running into a new security feature. Whoever owns
the ID that it is asking for is the only person who can
remove the security. That iPhone is worthless to you.
Maybe you are looking for
-
Parsing a string to integer gives 0 in Integer
Hi , try usid = Integer.valueOf(usi).intValue(); catch(NumberFormatException e) text = "NUMber"; in the above code the value of usi is 4 then parsing it is giving me 0 in usid try usid = Integer.parseInt(usi); catch(NumberFormatException e)
-
/*+ bypass_ujvc*/
please can anybody help if I use hint r /*+ bypass_ujvc*/ in update statement , will it be benificial? what is purpose ? is it relevent in oracle 10g.
-
Table Authorization GRP info req?
Hi I need to make a new Z authorization grp for a ztable,so that it can be used in mataiance generator. So plz tell me how to make it & is there any concern shd be taken care in making it so that MG can be used with limited authorization. Plz tell me
-
Synchronize date between OUD and AD
Hi all. I want to synchronize date between OUD(Oracle Unified Directory) and AD (Windows Active Directory). OIM(OID ODIP)? This framework is very powerful, but it seems to be a liitle heavy for me. Is there any solution more light and straight to rea
-
I am running Aperture and my wife is on iPhoto, both of us on the same iMac under different logons. I am looking for an easy way to copy all of my new photos from my Aperture library to the wife's iphoto library automatically whenever I add a new pr