Returned Failure Exit Code 1603

I am having an issue with one server in particular trying to install the CM client. The server is running Server 2008 R2 and is used as our primary file server.
ccmsetup.log repeats the following line...
![LOG[File 'C:\Windows\ccmsetup\vcredist_x86.exe' returned failure exit code 1603. Fail the installation.]LOG]!><time="12:27:07.395+300" date="06-04-2012" component="ccmsetup" context="" type="3" thread="4288" file="manifest.cpp:1972">
<![LOG[Installing file 'C:\Windows\ccmsetup\vcredist_x86.exe' with options '/q:a /c:"VCREDI~3.EXE /q:a /c:""msiexec /i vcredist.msi /qn"" "'.]LOG]!><time="12:27:07.395+300" date="06-04-2012" component="ccmsetup" context="" type="1" thread="4288" file="manifest.cpp:1923">

I saw a similar issue in the c:\windows\ccmsetup\logs directory...
It turns out that the user had an external drive connected which had more free space available than what was available on the local C:\ drive.
I believe the installer logic says to deflate the contents of the vcredist.exe package to the drive with the most available free space and then for some reason or another the installation routine cannot continue.
Out of interest, does the server in question have either a local or removable disk with more free space than the local C:\ drive? Perhaps a Mounted LUN or a mapped CIFS volume?

Similar Messages

Vcredist_x86.exe returned failure exit code 1602

Client install is failing where I have copied source files to a restricted server and initiated install with /source.
Installing file 'C:\Windows\ccmsetup\vcredist_x86.exe' with options '/q /norestart /c:"msiexec /i vc_red.msi /qn REBOOT=ReallySuppress" /msioptions "REBOOT=ReallySuppress"'. ccmsetup 12/8/2014 2:51:06 PM 4808 (0x12C8)
File 'C:\Windows\ccmsetup\vcredist_x86.exe' returned failure exit code 1602. Fail the installation. ccmsetup 12/8/2014 3:01:18 PM 4808 (0x12C8)
InstallFromManifest failed 0x80070642 ccmsetup 12/8/2014 3:01:18 PM 4808 (0x12C8)
I have only Port 80 and 8530 opened on this restricted server talking to Primary Site Server (SCCM 2012 R2).
Thanks

Its VC++ 2010.
Interesting after 8530 port opened... at 8pm CCMSetup installed fine from retry:
Running on platform X64 ccmsetup 12/8/2014 8:01:22 PM 3828 (0x0EF4)
Updated security on object C:\Windows\ccmsetup\cache\. ccmsetup 12/8/2014 8:01:22 PM 3828 (0x0EF4)
Launch from folder C:\Windows\ccmsetup\ ccmsetup 12/8/2014 8:01:22 PM 3828 (0x0EF4)
CcmSetup version: 5.0.7958.1000 ccmsetup 12/8/2014 8:01:22 PM 3828 (0x0EF4)
Running on 'Microsoft Windows Server 2008 R2 Standard ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18 ccmsetup 12/8/2014 8:01:23 PM 3828 (0x0EF4)
Ccmsetup command line: C:\Windows\ccmsetup\ccmsetup.exe "/source:C:\Temp\SCCM2012Agent\Client" /RetryWinTask:1 ccmsetup 12/8/2014 8:01:23 PM 3828 (0x0EF4)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required. ccmsetup 12/8/2014 8:01:23 PM 3828 (0x0EF4)
Command line: C:\Windows\ccmsetup\ccmsetup.exe "/source:C:\Temp\SCCM2012Agent\Client"
/RetryWinTask:1 ccmsetup 12/8/2014 8:01:23 PM 3828 (0x0EF4)
SslState value: 224 ccmsetup 12/8/2014 8:01:23 PM 3828 (0x0EF4)
No version of the client is currently detected. ccmsetup 12/8/2014 8:01:23 PM 3828 (0x0EF4)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist. ccmsetup 12/8/2014 8:01:23 PM 3828 (0x0EF4)
Updated security on object C:\Windows\ccmsetup\. ccmsetup 12/8/2014 8:01:23 PM 3828 (0x0EF4)
A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent. ccmsetup 12/8/2014 8:01:23 PM 3828 (0x0EF4)
ccmsetup service is stopped. ccmsetup 12/8/2014 8:01:23 PM 3828 (0x0EF4)
Successfully deleted the ccmsetup service ccmsetup 12/8/2014 8:01:28 PM 3828 (0x0EF4)
Successfully created the ccmsetup service ccmsetup 12/8/2014 8:01:28 PM 3828 (0x0EF4)
Could you please confirm what other ports are required apart from 80 (communication to Primary site server) and 8530 (updates/defs)?
Thanks

A failure exit code of 257 was returned - Offfice Communicator 2007 deployment

Hi
I'm trying to deploy Office Communicator 2007 with the MSI-File, the patch with the msp-file and the mui also an msi file.
I do this with a task sequence.
I tested the deployment a couple of times and it worked all the time.
Now I deployed the package to our clients this are xp sp3 and vista sp1 clients.
The deployment worked for about 2 hours. The notebook who where online at this time they received the package.
So I was able to update approximately the half of all clients.
But now every notebook who receive the deployment will get the same error massage:
1. The program for advertisement has not yet startet -> that is normal
2. Advertisement was received -> that is normal
3. Progarm started for advertisement (Command line: "C:\Windows\system32\CCM\TSLauncher.exe") -> also normal
4. The program for advertisement "XXX" failed ("BMA0014D" -"*") -> Then the advertisement has finished and no software is installed.
Here the error message:
The program for advertisement "BMA202BD" failed ("BMA0014D" - "*"). A failure exit code of 257 was returned. User context: AUTORITE NT\SYSTEM Possible cause: Systems Management Server (SMS) determines status for each program it executes. If SMS cannot find or correlate any installation status Management Information Format (MIF) files for the program, it uses the program's exit code to determine status. An exit code of 257 is considered a failure. Solution: For more information on the exit code, refer to the documentation for the program you are distributing.
BMA0014D is the ID of the Task sequence.
So I was searching on the internet but I didn't found anything about the "exit code of 257"
Why does it worked for 2 hours and now I receive the error message?
I tried to update the software packages on the distribution point. But I still get the same error.
Then i tried to create the advertisement new. But it still doesn't work.
The advertisement run time is set to "as soon as possible". The expire time isn't set.
Where is the problem?
I have no idea.
Thanks for your quick respond.

Hi
Now I tested normal advertisements and TS advertisements.
Both don't work and they get both the same error message, like this above.
Here is the content of the smsts.log:
Attempting to get locations for this member program. TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Location of the reference package BMA0014E is already resolved. Continue on next member program. TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Initializing polciy env variables TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Found policy in local WMI TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Initializing HTTP transport. TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Preparing Policy Assignment Request. TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Getting assignments from local WMI. TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: {3e48ad32-bd2d-4723-b03d-1b0ef0f48a98} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found non-active policy: {742d5df6-65e3-41d3-ab4b-183e1245fd37} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: {5cd60bfc-92b0-4aa5-bd99-26194a3affa4} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: {370da0bb-6d10-4fe6-bb2f-343fcaa16538} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: {7df73a1c-216e-450e-8ab3-f98f06fd5d9e} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found non-active policy: {a1bc1884-4826-4e87-8b3d-92335e6add61} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: {2e1d5407-e4fb-41be-bf3b-42a53f568575} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: {b6ce388c-fc36-4ab0-a054-30e55289fcba} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: {d73c8222-a828-4e06-8464-b3f65393f027} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: SMS00001-{166f310d-5df1-4e63-aca4-b8fe072d3c7b} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: SMS000ES-{04e7e852-ad40-49ec-9fe7-418be29053ba} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: {0b83f8e4-88b7-4676-8465-9f014d8eb901} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: {f9ba7a86-7390-4da1-a750-4c1d38886dd3} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: {b0e4df7f-fe9f-4b34-978f-1085e83137a1} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: {931e35bc-1469-4747-b37b-9f36c2e80ab5} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
found empty policy xml: {efe026c1-f84c-4ff0-b5f5-682d492c8fc9} TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Successfully read 13 policy assignments. TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Cannot find NAAConfig CCM_NetworkAccessAccount TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Network Access Account is not set TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Error initializing policy environment variables. Code 0x80040101 TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Error initializing TS environment. Code 0x80040101 TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Task sequence launcher advertisement failed!. Code 0x80040101 TSLauncher 16.07.2009 14:34:57 912 (0x0390)
Successfully finalized logs to SMS client log directory from C:\WINDOWS\system32\CCM\Logs TSLauncher 16.07.2009 14:34:57 912 (0x0390)
I have this content on all clients which do not get the advertisement.
What do you mean, what does your TS look like?
I have an Run Script command and 3 software packages to install.
On the client there will be a message that the installation in 5 minutes will beginn.
After those 5minutes the message disappear and that's all. Then I get the error message on the sccm server.
Where can I set or check the Network Access Account?

A failure exit code of 1152 was returned

The program for advertisement "XXXXXX" failed ("XXXXX" - "*"). A failure exit code of 1152 was returned.
User context: NT AUTHORITY\SYSTEM Possible cause: Systems Management Server (SMS) determines status for each program it executes. If SMS cannot find or correlate any installation status Management Information Format (MIF) files for the program, it uses the
program's exit code to determine status. An exit code of 1152 is considered a failure. Solution: For more information on the exit code, refer to the documentation for the program you are distributing.
I was trying to deploy a package which installs in a task sequence but failing. It works on other machines but failing on this particular client and was getting
the above status on SCCM. Anyone who already encountered this issue?
Thank you!

Below is the last failed status:
The program for advertisement "HD1200B0" failed ("HD100173" - "*"). A failure exit code of 33280
was returned. User context: NT AUTHORITY\SYSTEM Possible cause: Systems Management Server (SMS) determines status for each program it executes. If SMS cannot find or correlate any installation status Management Information Format (MIF) files for the
program, it uses the program's exit code to determine status. An exit code of 33280 is considered a failure. Solution: For more information on the exit code, refer to the documentation for the program you are distributing.
The last smsts.log indicated: "Waiting for software updates to pause".
A failure exit code of 33280?
Thanks!

Third party payload installer DistillrStarter.exe failed with exit code: 1603

I need to reinstall FrameMaker 11 after a system crash. At 99% of the installation process, I get the following message.
(For my understanding, downloading a new DistillrStarter.exe should solve the issue.
The file is for creating Japanese PDFs. I do not even need it. :-)
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW030 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe PDF Creation Add-On 10 10.0.0.0 {AC76D478-1033-0000-3478-000000000005} -----------
ERROR: Third party payload installer DistillrStarter.exe failed with exit code: 1603
----------- Payload: Adobe FrameMaker 11_AdobeFrameMaker11_en_US 11.0.0.0 {E26880FB-DEB4-4299-A1EB-FDEB85C09FD7} -----------
ERROR: DW030: Custom Action for payload Adobe FrameMaker 11_AdobeFrameMaker11_en_US 11.0.0.0 {E26880FB-DEB4-4299-A1EB-FDEB85C09FD7} returned error. Failing this payload.

Hi Mylenium,
from the notifications, IMHO, FrameMaker installation failed because of a corrupt DistillrStart.exe file in the installer.
What I did not know, in the installation options, I could disable PDF maker.
I do not need this module, that is already installed with Acrobat Pro on my system.
In the support chat, I was not pointed to this, either. Although I asked if I really had to uninstall
all Adobe software from my system before re-installing, even Acrobat...
Thank God, my company's administration remembered this issue from a previous installation.
Best regards,
Michael

Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7

Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7
I downloaded Photoshop Elements 10 for Mac (not trial, with valid serial #)
Mac OSX 10.7.2, 3.6 GHz Intel Core i5, 16 GB RAM
I know the install package is valid because I installed it on my backup laptop (same Max OSX version) after I was having problems with my primary desktop and it installed fine. I have followed all the instructions on the install package including "restarting my system and installing again," and the install keeps failing with the same message:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 18 error(s), 3 warning(s)
WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {75063C76-E858-455B-9C26-89E55D26F276} AdobeHelp 3.2.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/Fonts/BickhamScriptPro-Regular.otf" Error 0(Seq 1519)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1519)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
Suggestions? thanks.

Issue resolved with the help of Adobe Support (Mercer). My problem had been seen in another machine, there were empty folders in the Fonts Folder (Hard Drive>Library>Fonts) that the installer could not reconcile or delete, that was hanging up the Installer.
My fix was to delete the following empty folders from the Fonts Folder:
AdobeMingStd-Light.otf
BickhamScriptPro-Regular.otf
KozMinPro-Regular.otf
MyriadPro-BoldCond.otf
TektonPro-BoldCond.otf
And then re-run the installer (be sure to empty the trash).
My advice would be to first read the installer log and look for names of font folders that could not be resolved, then dump those. Another way would be to dump any empty folders in the Fonts Folder, empty the trash, then re-sun the installer.

ERROR: An error occurred during the installation of assembly component / ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

During the Installation of LR I get an error message. Initially I didn't have enough space for the installation on the start partition drive. However, now, it should be sufficient and I re-booted the computer a couple of time, hence I would assume that the temporary installation files have been deleted.
Now, nevertheless each time I try to re-install the software I get the following messages:
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
Since PS was installed without problems I would refrain from deinstalling the Creative Cloud and start over again.
Any hints?
Thx

Claasd5335054 you will want to review the MSI log files to determine what error message is preventing the installation from completing.
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
This is the only error information contained within Adobe Lightroom 5's installation log. The MSI log files contain the additional error messages.

Error installing mastercollection cs6 Windows7 x64 - ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603

Here's the error summary:
Exit Code: 6
See error summary below:
I installed the Visual C++ 2008 redis pkg from Microsoft site (both x86&x64) then tried reinstalling and after 2 hours the very error and nothing installed!!!
VERY FRUSTRATING...
Please advise
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s)
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.4148 {9C4AA28F-AC6B-11E0-8997-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "\\nbcc-srv-v-fs01\co-share\Finance and Administration\Information Technology\Software\Adobe\MasterCollection_CS6_LS16\WIN\Adobe CS6\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148 {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "\\nbcc-srv-v-fs01\co-share\Finance and Administration\Information Technology\Software\Adobe\MasterCollection_CS6_LS16\WIN\Adobe CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com

uninstall those old ms vc packages and install the latest, Latest Supported Visual C++ Downloads
then uninstall anything cs6 that did get installed, clean and reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

ERROR: Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1603

Anyone out there that knows how to get past this? I´m using Adobe Application Manager and nothing else.
Installed Photoshop and Illustrator without problem, but as I try to install Lightroom 5 it is aborted.

I am having the same problem, I am using win vista 64, and everything but LR 5 works,
{{ Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1603 }}
any solutions out there??

I have a problem updating my AcrobatX ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen. MSI Error message: Ugyldigt drev: K:\ ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

Acrobat X problem updating.
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
I have uninstalled my AcrobatX and now This message appear when I try to reinstall:
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Is there anybody who know how to solve it?

Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra

I try to install lightroom 5.6 and receive Exit Code: 7 ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 -----------
ERROR: Schlüssel ist im angegebenen Status nicht gültig.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: Schlüssel ist im angegebenen Status nicht gültig.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Same problem. I have CC installed on Win 7 with all other apps working fine. Tried to install Lightroom 5 and got:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.7.0.0 Adobe_Lightroom_x64.msi_5.7 -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {5C21D397-1DA5-
3749-8C1F-165F21DE9E3E}. HRESULT: 0x80070003.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component
{5C21D397-1DA5-3749-8C1F-165F21DE9E3E}. HRESULT: 0x80070003.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
I uninstalled all Adobe CC software, ran Adobe CC Cleaner, cleaned my Registry using Piriform CCleaner 5, rebooted and reinstalled CC from scratch. Same problem--everything else installed correctly except Lightroom 5. Also tried uninstalling KB2918614--no joy.
Dayton

Cant download lightroom 5..ERROR: Third party payload installer Adobe_Lightroom.msi failed with exit code: 1603

every time i download lightroom 5 it fail and says the cause is this (errror: third party payload installer Adobe_Lightroom.msi failed with exit code: 1603..

you should dl lr 5.7 and then check that your download is complete. if the same error message results when you try to install, start here - Error 1603: A fatal error occurred during installation
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Problem in installation exit code: 1603

I'm trying to install my lightroom 5 true the Creative Cloud, when the instalation appear to 42% then stopped and the error informed in summary it's: Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 -----------
ERROR: Erro 1359.Erro interno.
ERROR: Install MSI payload failed with error: 1603 - Erro fatal durante a instalação.
MSI Error message: Erro 1359.Erro interno.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Hi Michael,
Thank you for your response. I only received 2 installations on my CD......and I
have already used one. So this is a problem if I have errors on the second
install. It has been re-set for me once already due to an HP service issue that
wiped it out in November. It was downloaded with no problem or errors then prior
to their wipeout. (Creative Suite 5 - Student/Teacher edition).
I will be back home this Thursday. Would it be better to call support and have
this resolved over the phone? Also, I am not all that tech savy......so I could
really mess something up in the removal process. I don't even know where the CS
cleaner tool is.
Thank you again.
Colleen

Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {F24CABFE-ED58-3012-A491-F671A890E43B}. HRESULT: 0x80071A30.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {F24CABFE-ED58-3012-A491-F671A890E43B}. HRESULT: 0x80071A30.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

I followed the ostensibly applicable steps outlined in the above linked articles and no go.
Further, I have uninstalled and reinstalled .net framework two times.
Adobe's tech support team has (according to their findings) "determined" that my windows .net framework is "corrupted" and as such my system will disallow the installation of any .msi programs; my only salvation (according to Adobe) is to fork over $100.00 to Microsoft for "advanced" Windows tech support. Earlier today I was easily able to install Silkypix RAW software which is a program having an .msi extension. This seems to contradict the Adobe technical team's findings. Moreover, I've had ZERO installation issues with any other developer's programs including Corel, Sony and a host of additional 3rd party programs- ponderous.
As well, both Adobe Air and Acrobat function and routinely update on my system without incident. For the life of me I have no idea what to do to remedy this frustrating issue.
In addition to the 1603 error, I see a 1935 error as well. I would greatly appreciate any useable suggestions to permit the installation of Lightroom and PS.
Thanks!

PSE9 for Mac - Installation Failure Exit Code: 7

I get the following message when I try to install (either from disk or from downloaded trial version):
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 16 error(s), 12 warning(s)
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: 6952 Unable to preserve original file at "/Library/Fonts/MyriadWebPro-Italic.ttf" Error 0
ERROR: 6952 Command ARKDeleteFileCommand failed.
ERROR: The following payload errors were found during install:
ERROR: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: - Elements Camera Raw: Install failed
ERROR: - Elements 9 Organizer: Failed due to Language Pack installation failure
ERROR: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: - Adobe XMP Panels CS5: Install failed
ERROR: - AdobeTypeSupport CS5: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - Elements 9 Organizer_AdobeElements9Organizer_en_US: Install failed
ERROR: - Adobe Linguistics CS5: Install failed
ERROR: - Elements Inspiration Browser: Install failed
ERROR: - AdobeCMaps CS5: Install failed
ERROR: - Adobe Photoshop Elements 9_LangPacken_US: Install failed
ERROR: - Adobe Photoshop Elements 9: Failed due to Language Pack installation failure
I have tried all the suggestions that I found in other topics, but am still unable to install PSE 9.
This seems to be a problem for other users.
Is there a solution?
Thanks.
Jim

Look for this file or folder on your machine:
"<Macintosh HD>/Library/Fonts/MyriadWebPro-Italic.ttf"
Is there a folder named MyriadWebPro-Italic inside the Fonts folder? Is the file MyriadWebPro-Italic.ttf already existing within this folder?
In both the cases, delete this file/folder and try to install PSE again.
Hope this helps. Let me know.
Regards,
Ankush

Returned Failure Exit Code 1603

Similar Messages

Maybe you are looking for