Returning to "Standard View" in Safari 6.0.5 (OS 10.7.5)
Entering into a Afari window will full screen is simple enough.
Exiting from the full screen is not so simple.
Clicking on the "double arrows" in the upper right hand corner works only for the window currently open.
All other windows remain is full screen view and are accessible only one at a time.
Quitting Safari does not help.
Shutting down the Imac does not help.
Running OS 10.7.5, Safari 6.0.5.
I can not find a command in either Systems preferences or Safari preferences which resolve the acript issue.
Any suggestions welcomed!
Cheers
Riverview22102
Hello,
Check Safari's "View" menu if Full Screen is checked?
On every Safari Window try the esc key twice to normalize them all, then quit Safari & restart it for a test.
Similar Messages
-
My safari does not support in gmail standard view
Plz help me
My mac os x 10.6.2
Safari does not load in standard view
some time load gmail and view in safari Rcc in sideI have the same problem and must open it in html.
-
SetWhereClause not working for standard view object
Hi All,
We are trying to customize one standard page and for that we have add extra where conditions in the standard view object. In th standard view object query is null which is actually getting executed in vo impl using setQuery as follows:
Please refer setUpQuery Method:
Below is the controller code from where it is getting fired:
if(oapagecontext.getParameter("SearchButton") != null)
oapagecontext.putParameter("CurrAction", "SEARCH");
validateCategoryCriteria(oapagecontext, oawebbean);
SupplierSearchVOImpl suppliersearchvoimpl = (SupplierSearchVOImpl)suppliersearchamimpl.findViewObject("SupplierSearchVO");
if(flag)
suppliersearchvoimpl.setupQueryForRequestedSupplier(oapagecontext, oawebbean);
else
suppliersearchvoimpl.setupQuery(oapagecontext, oawebbean);
suppliersearchvoimpl.executeQuery();
oapagecontext.setForwardURLToCurrentPage(null, true, "S", (byte)99);
break label0;
As in the seeded condition setForwardURLToCurrentPage is getting fired we have added additional where condition in the processRequest of the extended controller as follows:
public void processRequest(OAPageContext pageContext, OAWebBean webBean) {
super.processRequest(pageContext, webBean);
pageContext.writeDiagnostics(this, "inside PR",1);
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean).findApplicationModule("SupplierSearchAM");
// OAViewObject vo = (OAViewObject)am.findViewObject("SupplierSearchVO");
SupplierSearchVOImpl vo = (SupplierSearchVOImpl)am.findViewObject("SupplierSearchVO");
//String voQuery = vo.getQuery();
//pageContext.writeDiagnostics(this, "SupplierSearchVO Query : "+voQuery, 1);
//String whereClause1 = vo.getWhereClause();
//pageContext.writeDiagnostics(this, "SupplierSearchVO Where Clause : "+whereClause1, 1);
//pageContext.writeDiagnostics(this, "vo count "+vo.getRowCount(),1);
//vo.setWhereClauseParams(null);
pageContext.writeDiagnostics(this, "sessionVal PR"+pageContext.getSessionValue("sessionVal"),1);
if (pageContext.getSessionValue("sessionVal")!=null) {
if(pageContext.getSessionValue("sessionVal").equals("NO")) {
if(vo!= null){
// vo.setWhereClause("QRSLT.vendor_id = :2");
// vo.setWhereClauseParam(1,1486622);
// vo.setWhereClause("vendor_id = 1486622");
String voQuery = vo.getQuery();
StringBuffer stringbuffer = new StringBuffer(" ");
stringbuffer.append("SELECT select_flag,vendor_id,vendor_name,asl_entry,trading_partner_id,\n" +
"Po_Hold_Switcher_Col,po_docs_totals,tot_invited_negs,tot_awarded_negs,requested_supplier_id from (");
stringbuffer.append(voQuery);
stringbuffer.append(") where vendor_id = 1486622" );
String str = stringbuffer.toString();
vo.setQuery(null);
vo.setFullSqlMode(vo.FULLSQL_MODE_AUGMENTATION);
pageContext.writeDiagnostics(this, "new query string==>" + str,1);
vo.setQuery(str);
pageContext.writeDiagnostics(this, "new query after vo==>" + vo.getQuery(),1);
pageContext.writeDiagnostics(this, "new query ready toexecute==>" + vo.isPreparedForExecution(),1);
if(vo.isPreparedForExecution()) {
vo.executeQuery();
else {
vo.setPreparedForExecution(true);
vo.executeQuery();
pageContext.writeDiagnostics(this, "vo count "+vo.getRowCount(),1);
pageContext.writeDiagnostics(this, "new query "+vo.getQuery(),1);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext,
OAWebBean webBean) {
// sessionVal="No";
pageContext.putSessionValue("sessionVal","NO");
pageContext.writeDiagnostics(this, "sessionVal PFR"+pageContext.getSessionValue("sessionVal"),1);
super.processFormRequest(pageContext, webBean);
pageContext.writeDiagnostics(this, "ProcessFormRequest called...", 1);
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean).findApplicationModule("SupplierSearchAM");
//if (pageContext.getParameter("SearchButton")!=null)
// pageContext.writeDiagnostics(this, "inside serach button custom",1);
//super.processFormRequest(pageContext, webBean);
// SupplierSearchVOImpl vo = (SupplierSearchVOImpl)am.findViewObject("SupplierSearchVO");
//OAViewObject vo = (OAViewObject)am.findViewObject("SupplierSearchVO");
//String voQuery = vo.getQuery();
//pageContext.writeDiagnostics(this, "SupplierSearchVO Query : "+voQuery, 1);
//String whereClause1 = vo.getWhereClause();
//pageContext.writeDiagnostics(this, "SupplierSearchVO Where Clause : "+whereClause1, 1);
//pageContext.writeDiagnostics(this, "vo count "+vo.getRowCount(),1);
//vo.setWhereClauseParams(null);
//vo.setWhereClause("vendor_id = :1");
//vo.setWhereClause("city = :2");
// vo.setWhereClause("vendor_id = :1");
//vo.setWhereClauseParam(0, "1486622");
// vo.executeQuery();
// pageContext.writeDiagnostics(this, "new query after execute ==>" + vo.getQuery(),1);
// vo.executeQuery();
//pageContext.writeDiagnostics(this, "vo count "+vo.getRowCount(),1);
// SupplierSearchAMImpl suppliersearchamimpl = (SupplierSearchAMImpl)pageContext.getApplicationModule(webBean).findApplicationModule("SupplierSearchAM");
// boolean flag = "PROSPECTIVE".equals(pageContext.getParameter("SupplierStatus"));
// if(pageContext.getParameter("SearchButton") != null)
// pageContext.putParameter("CurrAction", "SEARCH");
// validateCategoryCriteria(pageContext, webBean);
// SupplierSearchVOImpl suppliersearchvoimpl = (SupplierSearchVOImpl)am.findViewObject("SupplierSearchVO");
// if(flag)
// suppliersearchvoimpl.setupQueryForRequestedSupplier(pageContext, webBean);
// else
// suppliersearchvoimpl.setupQuery(pageContext, webBean);
//suppliersearchvoimpl.customExecuteQuery();
// oapagecontext.setForwardURLToCurrentPage(null, true, "S", (byte)99);
// break label0;
We have tried setting both where clause and query but the issue is condition is getting added in the query when I am printing getQuery but while executing it is executing the old vo query only.
So can anyone help us on this?When you post a question, please use the Advanced Editor and paste the code with appropirate syntax. It will make it easy to read. Otherwise your question might get ignored by others as it is very very difficult to read.
What is the output you are getting for the below diagnostic messages ? Is it returning the correct query and correct count ?
pageContext.writeDiagnostics(this, "vo count "+vo.getRowCount(),1);
pageContext.writeDiagnostics(this, "new query "+vo.getQuery(),1);
Cheers
AJ -
Unable to open "compose mail/settings/contacts" in standard view in 2 out of 3 Gmail accounts
Unable to open "compose mail/settings/contacts" in standard view in 2 out of 3 Gmail accounts. When "compose new mail" is selected "loading...." appears at the top then the page is frozen. ie you can't select inbox etc. Changing from standard to basic h/ml then clears the Loading... and gmail can be used (without spellcheck etc).
This might not be Mozilla, but I can access these accounts in standard view on another computer.Your Gmail account may well be an IMAP account, just like the iCloud mail account. In which case it will work in just the same way as iCloud mail, except that you will have to set it up manually on each device, where as iCloud mail adds the account itself when you log into iCloud.
Whilst it works the same as iCloud mail it isn't iCloud that syncs it for you. -
How to use data from standard view in Web dynpro for ABAP
Hello:
I have to create an Abap Web Dynpro, and I must use data from a standard view in the new one. Does anybody know what do I have to do?
Thank you and have a happy new year.Hi Rodrigo,
Firstly, list the Standard component under Component Usage of the Component which you are creating in your View.
Second, In the Custom Component, view, goto context, and try to add the node from the Standard component in to your view.
NOTE: The second step requires a Node in component controller of the Standard Component.
Finally, Now in your view, get the data from that and map the data.
NOTE: To do this, I think you need to call your Standard WDA first and then only your node contains data and it will be passed.
I hope it is helpful.
Regards,
Shashikanth. D -
I have an iPhone 6 with IOS 8.1.3. When I go to the landscape view in Safari, the bookmark page appears and takes up one half of the screen. How can I get rid of the bookmark page so I can use the whole screen to what I am browsing?
OOPS! Too quick on the trigger to ask that question without trying anything. Sorry. Solved it by touching the bookmark icon.
-
How to get standard view or table for the standard inforsource
Hi all:
According to business reqirement, we are going to use standard inforsource 0CO_OM_CCA_10,
we need to know the standard view or table in order to corresponding DataSource?
could you please tell me how to get the standard view or table or DataSource?
Couldn't thank you more!Hi Sony,
Goto RSA1>BI content installation>goto objects>double click on the Infosource>then a pop-up comes search for that infosource-->select it and click on transfer
Before that in the right side of the tab select the grouping as "Before and afterwards of the dataflow" and collection as automatic.
then you get all the datasource/cubes and all the object related to the infosource.
OR another option is-->
Goto RSA6 in the R/3 and search for the datasource with the name "0CO_OM_CCA_10" (don't forget to expand all the tree structure in RSA6)
then goto that datasource and double click on the datasource then you will get the Extract structure of that datasource.
double click on the extract structure then you may get the View name also.
hope this helps...
Regards,
Ravi Kanth -
How to create a new view by copying from standard view in IC webclient?
Hello, expert,
I need to enhance a sap standard component (BP_Factsheet), inside it I need to create a new view by copying from an existing standard view (Acitivities). However when I try to make a copy, I was asked for destination BSP application, I entered the Z-Application which I used when defining enhancement for the component. After the copy, I don't see the new view.
Then I tried the destination BP_factsheet, instead of the z-application, then after the copy, I can see the new view. However since it's in SAP application, it seems like it's a MOD, not enhancemnet, and inside the new view, the classes (for context, context nodes, etc.) are not in custom namespace (not starting with Z).
So please let me know how can I make a copy of sap standar view in custom namespace.
Thanks in advance.
JaysonWhen copying you can put any BSP name..normally the practice is to prefix the standard name with a Z.
Secondly when you want to make changes to the individual classes and methods you need to right click and say enhance. Then the AZ class names etc would be generated. The view should appear in the component wherein you copied the original view from.
I hope this helps.
The cookbook should have details on this. Otherwise also its quite intuitive.
Award points if it helps.
Thanks. -
Modify "standard view" settings for an ALV in a WD4A view
Hi fellow developers
I have placed an ALV on WD4A view.
In the WDMODIFYVIEW I try to manipulate the ALV settings but somehow the settings of the "standard view" overrule my commands.
The settings of the "standard view" are not modifiable from within the function.
Is there a possbility to change the settings of this "standard view" that is being used for this ALV?
Kind regards
Wouter Heuvelmans
Pyramid Applied SolutionExecute your application in administration mode, afterwards you can change the settings using settings link of the ALV and save the same as part of "Standard View". If you want settings only for a user then ask user create a view of there own and set the same as default view.
Even if you maniuplate ALV Layout settings ( other then Initial settings set during ALV call ) the same will be overruled by the default view set in the ALV i.e. Initial settings.
Regards
Rohit Chowdhary -
Create a new button in a sap-standard-view WD4A
In webdynpro for ABAP
I have changed the text on an existing button in a sap-standard-view using configuration (change application configuration/go to component configurator/implicit configuration and then on the view-component change the text) it works perfect.....
my next step is to create a new button beside the old one with a new text on it, I created a new button by using "enhance view" (I copied the existing button) the new button appears (so far so good) but when I go into the configuration to change the text on the new button (using configuration the same way I did when I changed the text on the existing button) I cant find my new button in the view-component list....why can't I find it there so I can change the text?
Can anyone help me this one?I don't believe that the Configuration tool picks up Enhancement Objects because of the way they are linked to the original component at Runtime. Why set the text using configuration? You can control the text within the enhancement object. Do you want different texts based upon multiple configurations?
-
Deleting entries from a Standard View
Hi,
How do I delete duplicate entries from an Standard View in an Abap Code?
Thanks,
PravsThen it becomes complicated. Are you trying to delete the duplicates from a view? Then look at your view definition and see if you can avoid duplicates by changing its selection criteria. Also take note of Rob's comment.
If you are trying to delete from a database table as opposed to a view, then I don't know how you achieved the feat of having duplicate entries as any duplicate inserts with same key fields would have resulted in dump. Can you please clarify? -
Deleting fields from a standard view
Hello,
I want to delete fields form standard view which are appended by me accidentally . I have written a delete statement to delete the fields from the standard view . but i got an error at declaration part . I have declared it as shown below
Tables : V_MMIM_REP_CUST
V_MMIM_REP_CUST----
> is the view name
So, guide me how to declare this view .
Regards,
mnarar.
Edited by: mnarar on Nov 30, 2011 1:12 PMHi,
This is just an idea to delete the records from the Table. But ideally you should not use this approach in any development.
The table for this view is MMIM_REP_CUST. You can write a Custom Report Program where you need to create a work area with the values which you would like to delete. And then write a Delete statement and delete the table entry from that work area.
I guess you are doing this in the development environment and have all the necessary authorizations. And you should not transport any report like the above to other environments. Also double check if that entry will not effect other business scenarios.
Hope this helps.
Best Regards,
Samantak. -
Set viewset dynamically as standard view in a window
Hello collegues,
I want to Display a certain view ("view 1") in an overview page of another component.
"View 1" is in "Viewset 1".
"Window 1" has two viewsets:
"Viewset 2", marked as Standard.
"Viewset 1", not marked as Standard.
"Window 1" is in the component Interface aso.
When I add "Window 1" to the overview page of my component, then "Viewset 2" is shown, not "Viewset 1".
How can I set "Viewset 1" dynamically as Standard view in "Window 1" so that "View 1" is shown in my overview page?
Best regards,
Thomashi,
In Overview page IMPL Claz you will find the method " DETACH_STATIC_OVW_VIEWS ".
redefine that method and use the following piece of code,
mt_detached_views of type BSP_DLC_OVW_STAT_VIEW_ATTACH_T declare as a Global variable in IMPL claz
DATA:it_svs TYPE bsp_dlc_ovw_dyn_views_list_t,
wa_svs TYPE bsp_dlc_ovw_dyn_views_list,
wa_det TYPE bsp_dlc_ovw_stat_view_attach.
*/ Getting the list of Views of a OV page....
it_svs = me->get_list_of_static_views( ).
READ TABLE it_svs INTO wa_svs WITH KEY viewid = 'VIEWSET2'.
wa_det-viewid = wa_svs-viewid.
APPEND wa_det TO mt_detached_views.
CLEAR wa_det.
rt_viewid = mt_detached_views.
hope this might be helpful,
Regard's
Vam's.... -
Problem in calling standard view in nested view container
Hi Experts,
We have a standard SAP component in which there is view containing a TABStrip. In one of the tabs there is a View container. This view container calls another view containing a view container, which in turn calls another standard view of standard component SALV_WD_TABLE. The whole structure is as below:
MAIN(View)->VC_container1(view container)->View1(called view)->VC_Container2(View container in called view)->Table(standard view of SALV_WD_TABLE).
Now we are trying to add one more tab in the same tabstrip and trying to call the the same TABLE view of component SALV_WD_TABLE in the same manner described above. It is allowing us to add the view but when we are activating the enhancement the standard view TABLE of component SALV_WD_TABLE gets disappeared. Can anybody suggest what to do.
Thanks and Regards,
Vaibhav Tiwari.Hi Vaibhav,
My Ques is that are your using the same component usage of salv_wd_table for the Second tab you have added.
Because you are using the component usage of salv_wd_table already in the first tab. So when you are goinig to use the same component usage for the second tab then this problem might will happn i.e. the table is disappeared in the second tab.
Regards
Manoj Kumar -
Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping ! Thx
Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping ! Thx
Maybe you are looking for
-
The new OS is burning through my data plan like crazy and here's why. Imessage uses your data plan and not your texting plan. So every time you send a text message to someone with an iphone it uses imessage and it uses your data, not your text plan
-
After a few days without a restart, MacMini running 10.6.7 with 2GB RAM is currently showing 1.15GB or wired memory utilization with no applications open. After a restart, this is around 100MB but as days pass without a restart, it creeps up to 1-1.
-
Un-modified folders with changed modification dates
I have several folders that I have not touched for months, and suddenly, they all have the same modification date & time. The files inside the folders have the correct dates on them (some are two years old). This seems to be happening with only one f
-
How to get the application path?
Does some body know how to get the application path in Java? Here is an example about what I'm thinking: Let's imagin the application is on "c:\try" or "c:\ProgramFiles\MyApp". My question is how can I find the path where the application is. Please g
-
The display on my computer has turned into pink lines and i don't know what i should do
The display on my computer has turned into pink lines and i don't know what i should do