Returns & Goods Receipts

Hi, hopefully, this group can help me out.
Iu2019m an end-user that has the following problem while using ME22N when updating my ZCON (construction contract/purchase order)
When the contract is created we assign a large dollar value based on the bid from our vendors.
Occasionally, the scope of work changes and we are given a change order for a credit by the vendor (example: $21,000 credit for landscaping change).
My goal is to reduce the value of the contract/purchase order, but the system will not allow negative numbers and using the return flag and doing just a goods receipt causes audit issues with accounting (they think we overpaid them, but we did not). Does anyone have a suggestion?

Hi,
>>>i am little confused about the usage of the idoc type provided in mapping like how can create IDOC with goods receipt or goods return based on the received quantity.
you cna use function substring (from standard graphical message mapping)
and use it to check the first char of the quantity
if it's - then map 102 to the MOVE_TYPE field of the idoc
if not then map 101...
I never worked with 102 with MBGMCR but 101 against a PO works for 100%
Regards,
Michal Krawczyk

Similar Messages

Goods Receipt PO, Based on Goods Return, Including Serials

Hi All,
When you received an item to stock from your vendor, and the item was defective,
You should return the item to the vendor using 'Goods Return'.
What should one do in the following case:
Instead of crediting the returned item - the vendor decided to fix the defective part - and resend it to our stock.
The normal procedure, as I know it, would be to copy the 'Goods Return' to a 'Goods Receipt PO'.
However, if the item is managed by serials - The system won't allow me to return the same serial to stock,
and only lets me create a new serial.
If I will type the original serial manually in the 'Goods Receipt PO', the system will simply create a new record in the serial table (assuming duplicated serials are allowed).
What is the correct way to handle this situation ?
Many Thanks !

Anyone ??
Pretty Please .....

Landed costs can not get Goods receipt PO when Goods return made

Hi, everybody
I need to calculate landed costs and it seems that I can not use when I built a Goods return.
My procedure as follow ( ps: the same vendor number)
1. created a PO then Goods receipt PO (docNum says 1111) which included 20 quanties for item no AAAA.
2. created a Goods return which Copy from Goods receipt PO no: 1111, which included 5 quanties for item no AAAA.
3. next, I try to caculate my Landed costs. I open a new Landed costs and click the button "Goods Receipt PO", but I can not find any Goods receipt PO no: 1111.
What can I do to caculate my exactly landed costs & Goods receipt PO no: 1111 that included 15 quanties?
Thanks for your help

When you only Returned partial goods from your Receipt. The Receipt should still be open and you should be able to process the Landed cost. I am not sure why the GR is not showing in the landed costs window.
Please check if the GR is closed by an AP Invoice / by itself.
Otherwise, you will need to process AP Goods Return for the remaining 15 and process a New Goods Receipt for 15.
Regards
Suda

Copy to Goods Receipt PO function on Goods Return

In current version 2007A there is no Copy to Goods Receipt PO function on Goods Return document. There is only Copy to A/P Credit Memo. This list should contain all available target documents.

Yes, you can. You just need to go to add A/P invoice and click on Copy From button. Then select multiple GRPO to copy. However, you will be warned that only target FX rate can be used if you have BP currency instead of LC.
Thanks,
Gordon

Error in post goods receipt of delivery for a cross company return STO

Hi
I created a cross company return STO in ME21N (with returnd indicator). Vendor V001 (DC) and Site F001.
I created a delivery in VL10B. Delivery Type NCR.
I did a Goods Receipt for STO. Movement Type 161. Internally stock in issued from site F001.
I am trying to do a Post Goods Receipt of the Delivery in VL02N and I am getting this error.
Delivery quantity is greater than supplying site stock quantity
Message no. VL900
Supplying site is F001 which has enough stock.
DC has no stock and I amtrying to return stock to DC from store.
How to eradicate this issue?
Thanks and Regards

Hi
http://wiki.sdn.sap.com/wiki/display/B1/SAPBusinessOne...ToGo-3.TheBasicsofFinancial+Accounting
http://help.sap.com/saphelp_sbo88/helpdata/en/45/06b9997d720487e10000000a155369/content.htm
kiran

Goods receipts and Goods returns against PO

Hello gurus
Good day to you. please find my requirement below
1. i am get ting GR against PO data from legacy system and i need to post Good receipts or Goods retruns documents (ie based on the quantity recieved, if it is +ve value for quantity then post goods receipt against PO and if it is -ve value for quantity then post goods returns against PO) in SAP by using PI as middleware.
2. IDOC provided is MBGMCR03 and message type is MGBMCR.
So now my question is based on the received quantity i have to change the movement type as 101 and 102 respectively in idoc mapping of PI but i want to know how can i do that. i am little confused about the usage of the idoc type provided in mapping like how can create IDOC with goods receipt or goods return based on the received quantity.
I request you to please let me know the process to follow. can i use only one idoc provided for mapping and can i do this task in only one interface, please clarify. if i can use the idoc provided and if i can do this task in one interface (ie legacy - PI - SAP), please let me know the steps which i need to follow to complete my scernario successfully.
Thanks and Regards
Raj

Hi,
>>>i am little confused about the usage of the idoc type provided in mapping like how can create IDOC with goods receipt or goods return based on the received quantity.
you cna use function substring (from standard graphical message mapping)
and use it to check the first char of the quantity
if it's - then map 102 to the MOVE_TYPE field of the idoc
if not then map 101...
I never worked with 102 with MBGMCR but 101 against a PO works for 100%
Regards,
Michal Krawczyk

Return Delivery Goods Receipt amount takes current MAP instead of old MAP

Hi,
I'm facing a problem in the following scenario:
1. Sales order is created
2. Delivery is created
3. Goods Issue for the Delivery is posted (cost of goods sold = current moving average price of material = 100 SEK)
4. Invoice is created
Event: Moving average price of material is increased with 100 % (Moving average price changed from 100 SEK to 200 SEK)
Event: Customer returns the order for some reason
5. Return order is created with reference to the invoice in step 4 (same amount the invoice)
6. Return delivery is created
7. Credit note is created (same amount as the invoice)
8. Goods Receipt for the Returns delivery is posted (cost of goods sold = current moving average price of material = 200 SEK)
Result: The financial bookings after the Goods Receipt will use the new moving average price and the stock value will increase with 200 SEK, even though the initial stock deduction was only 100 SEK to delivery the material to the customer.
Problem: We have now created 100 SEK worth of stock --> This is not allowed
Question: How can I manipulate the goods receipt amount to use the old moving average price of 100 SEK instead of 200 SEK?
Thanks for your suggestions!
Edited by: Berglund Teodor on Jun 1, 2010 4:17 PM

Hi Teodor!
I have to solve the same problem. Could you give me some more information about tha way you used this badi?
Thank you .
Florina

Goods Receipt and Goods Return entries shows as Zero in PO history.

Dear All,
The Goods Receipt and Goods Return entries are showing as "Zero" in Delivery Cost Quantity, Amt. in local currency fields in PO History (T.Code: ME23N)
What could be the reason? How to find out the error?
Expectiing valuable guidelines from the forum.
Thanks in Advance.
GB

Hi
Not ticked.
GB

Purchase Order Module - Goods Receipt PO - Goods Return - AP Invoice

Hi all expert,
I have a senario is :-
Open Purchase Order Module -> Goods Receipt PO -> Goods Return -> AP Invoice
Puchase Product A by "Purchase Order" with Qty 6,000 After "Good Receipt PO", found out 3,500 pcs is out of spec then "Goods Returns" 3,500 pcs. Then continue do "AP Invoice" with Qty 2,500 pcs.
Question is 1 week later, the supplier replacement back 3,500 pcs, so how am i going to start to steps? since PO have been close.
When i at "Goods Receipt PO" wanna to copy from "Goods Return", it is show nothing.
Your advise is highly appreciated.
Thanks.
Regards,
Danny

Hi Danny
i think you have to create a new PO then GRN then PI...since you copied the PO to GRN it will show as closed as there is a target doc. linked to the PO. A PO can be changed only if there is no target doc linked to it .
Hope this helps.
Bongani

Goods Receipt Against A Goods Return - Not Working

Hi,
i have been trying to work through the Purchase goods return process for a client and am having issues with the flow.
This is the process :-
Create Purchase Order for 1 item, Qty = 21
Goods Reciept linked to Purchase Order - Qty = 21 this is 100% (Purchase Order Closes)
Goods Return linked to Goods Receipt - Qty = 1
Goods Receipt replacement item from supplier - attempted to link to Goods Return - none available - find goods return closed !!!
How can i link the new goods receipt with the original Purchase Order/Goods Receipt/Goods Return if the goods return is closed.
I'm using 2007A SP01 PL05
Thanks
Barry

Dear Mr Mason,
The scenario you described:
Return closed automatically after being added
is system behaviour.
It is not possible to link the new GRPO to the goods return.
The only suggestion I can give you is writing the GRPO and goods return numbers in the remark of the new GRPO.
Regards,
Marcella Rivi
SAP Business One Forums Team

Problem of Query of Module Purchase Order, Good Receipt PO, Good Return

Hi,
I would like to seek for assistance regarding double entries of documents, I have used the query and found out lately the it has a problem, Please refer to thread "Query of Module Purchase Order, Good Receipt PO, Good Return" for details.
You help is very much appreciated.
Regards,
Clint

Hi Clint,
Try this one:
SELECT DISTINCT 'GRPO' AS TYPE, T1.DOCNUM
'GRPO/RET#', T3.DOCNUM 'PO#',T1.CARDCODE,
T1.CARDNAME , T1.DOCDATE, T0.ITEMCODE, T0.QUANTITY,
T0.PRICE, T0.LINETOTAL
FROM DBO.PDN1 T0
INNER JOIN DBO.OPDN T1 ON T1.DOCENTRY = T0.DOCENTRY
LEFT JOIN DBO.POR1 T2 ON T0.BASEENTRY = T2.DOCENTRY
INNER JOIN DBO.OPOR T3 ON T2.DOCENTRY = T3.DOCENTRY
WHERE T1.DOCNUM = '[%0]' AND T0.ITEMCODE IS NOT NULL
UNION ALL
SELECT DISTINCT 'RETR', T1.DOCNUM,T3.DOCNUM,
T1.CARDCODE, T1.CARDNAME , T1.DOCDATE, T0.ITEMCODE,
T0.QUANTITY, T0.PRICE, T0.LINETOTAL
FROM PDN1 T0
INNER JOIN OPDN T1 ON T1.DOCENTRY = T0.DOCENTRY
LEFT JOIN RPD1 T2 ON T0.TRGETENTRY = T2.DOCENTRY
INNER JOIN ORPD T3 ON T2.DOCENTRY = T3.DOCENTRY
WHERE T1.DOCNUM = '[%0]' AND T0.ITEMCODE IS NOT NULL
If you still have duplicates, let me know any differences in those lines.
Thanks,
Gordon

Query of Module Purchase Order, Good Receipt PO, Good Return

Hi,
Like to ask assistance regarding Module Purchase Order, Good Receipt PO, Good Return under Purchasing A/P.
I have a hard time to linking the tables above:
PO Module have table : OPOR and OPOR1
GRPO have table : OPDN and PDN1
Good Return have table : ORPD and RPD1
Its very mind bubling linking this 6 tables can anyone please can assist regarding the situation, a query that shows that they are connected to each other.
Thank very much!
Clint

Clint,
Like Suda said, this query assumes your have normal business practise.
One more thing to mention, the lower part of union all needs some other change. Here is the complete query:
SELECT     DISTINCT 'GRPO' AS TYPE, T1.DOCNUM "GRPO/RET#", T3.DOCNUM PO#,T1.CARDCODE, T1.CARDNAME , T1.DOCDATE, T0.ITEMCODE, T0.QUANTITY, T0.PRICE, T0.LINETOTAL, T0.TOTALFRGN, T0.RATE
FROM         PDN1 T0
INNER JOIN OPDN T1 ON T1.DOCENTRY = T0.DOCENTRY
LEFT JOIN POR1 T2 ON T0.BASEENTRY = T2.DOCENTRY
INNER JOIN OPOR T3 ON T2.DOCENTRY = T3.DOCENTRY
WHERE    T1.DOCNUM LIKE '[%0]'
UNION ALL
SELECT     DISTINCT 'RETR', T1.DOCNUM,T3.DOCNUM, T1.CARDCODE, T1.CARDNAME , T1.DOCDATE, T0.ITEMCODE, T0.QUANTITY, T0.PRICE, T0.LINETOTAL, T0.TOTALFRGN, T0.RATE
FROM         PDN1 T0
INNER JOIN OPDN T1 ON T1.DOCENTRY = T0.DOCENTRY
LEFT JOIN RPD1 T2 ON T0.TRGETENTRY = T2.DOCENTRY
INNER JOIN ORPD T3 ON T2.DOCENTRY = T3.DOCENTRY
WHERE    T1.DOCNUM LIKE '[%0]'

Good Receipt (movment type : 161) for a PO (PO with Return items) -- Error

Hi,
When i post a good receipt (movment type : 161) for a PO (PO with Return items), i have this Error Message :
" Account 61522200 requires an assignment to a CO object "
Note : in this GR i have already : Profit center, Funds center and Order (CO objects)
So please what could be the reason ? and how to resolve it ?
Please advise
Regards.

Please check first the field status of the account in FS00. If this account requires CO object as mandatory then check whether a cost element is created or not , this error normally occurs when CO object is mandatory but relevant cost element is not created.
(or)
Goto OKB9 : The u201CChage View u201CDefault account assignment: Overviewu201D appears. Enter the company code, cost element, and default cost object. The cost object could be a cost center, internal order or profit center.
Edited by: m_n_novice on Sep 2, 2009 5:51 PM

Is that possible to allow the Good Receipt on customized return Mvt Type

Hi All
Is that possible to allow the Good Receipt on Customized movement Type, Reference string for these movement type is 601
and these customize movement type has bee flagged for reveres movement type indicator under Internal Control and Under Update control consumption Posting is set as G "Planned consumption"
Thanks in advance

Hi There
As per the STD SAP,,
601 Goods issue for delivery (SD)
This movement cannot be entered manually. It is created automatically in SD using the function "Goods issue for delivery".
The quantity is taken from unrestricted-use stock.Possible special stock indicators: E, K, Q
You could have copied the 602 istead of 601,,
However if you are planning for the receipt (Returns from customer) you can use the Mov type-651,, if you want to have diff Acc assignments, you can copy this to Z movements,,
Hope it helps
Thanks
Senthil

Return Component flag in Good Receipt

Hello, I'm creating a report which need to know which one is a Good Receipt and a Return Component from Production Order.
I've tried to look at the table, but can't find which is the flag for Return Component and the other (Good Receipt).
Does anyone can help?
Thanks
-Flo

Hi,
Try this:
SELECT T0.DocNum as [Receipt No.] ,T1.BaseRef as [Prod Order No.] ,T1.ItemCode ,T1.Quantity
FROM OIGN T0
INNER JOIN IGN1 T1 on T0.DocEntry=T1.DocEntry
WHERE TranType is null and BaseType=202
Thanks,
Neetu

Returns & Goods Receipts

Similar Messages

Maybe you are looking for