REUSE_ALV_GRID_DISPLAY layout problem

Hi All,
I have a report which can output two different ALV grid depending upon the option selected on selection screen.
For example say I have selection screen with option button for Vendor report and Customer report. When user select Vendor report option button then content of KNA1 is displayed in ALV grid, similarly when user select Vendor report option button then content of LFA1 is displayed.
Now when I save a layout on Vendor report, that layout is also visible on Customer report and vice versa. Both of these report share same set of layouts.
Is there any method so that both of these report have there own set of layouts?
The problem which I am facing is I have save a layout on Vendor report to display column LFA1-LIFNR only and this layout is DEFAULT layout. Now when I run report for Customer report (customer option button selected) it shows me only on column KNA1-LIFNR. Actually it select the layout which is saved with Vendor report.
Is there any solution? Thanks in advance...
Vendor
Ceus

hii
check this out
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
PARAMETERS: P_VBTYP LIKE VBAK-VBTYP DEFAULT 'C'.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: LIST RADIOBUTTON GROUP G1,
            GRID RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
FORM CHECK_OPTION.
WA_EVENTS-NAME = 'TOP_OF_PAGE'.
WA_EVENTS-FORM = 'TOP'.
APPEND WA_EVENTS TO IT_EVENTS.
CLEAR WA_EVENTS.
WA_EVENTS-NAME = 'END_OF_LIST'.
WA_EVENTS-FORM = 'END_LIST'.
APPEND WA_EVENTS TO IT_EVENTS.
CLEAR WA_EVENTS.
IF LIST = 'X'.
    PERFORM LIST_DISP.
ENDIF.
IF GRID = 'X'.
    PERFORM GRID_DISP.
ENDIF.
ENDFORM.
FORM CHECK_OPTION.
WA_EVENTS-NAME = 'TOP_OF_PAGE'.
WA_EVENTS-FORM = 'TOP'.
APPEND WA_EVENTS TO IT_EVENTS.
CLEAR WA_EVENTS.
WA_EVENTS-NAME = 'END_OF_LIST'.
WA_EVENTS-FORM = 'END_LIST'.
APPEND WA_EVENTS TO IT_EVENTS.
CLEAR WA_EVENTS.
IF LIST = 'X'.
    PERFORM LIST_DISP.
ENDIF.
IF GRID = 'X'.
    PERFORM GRID_DISP.
ENDIF.
ENDFORM.
hope this helps
Thanks&Regards
Naresh

Similar Messages

CSS Layout Problem?

Can someone please help me with a layout problem.
As far as I can tell the page looks as it should in Netscape,
Firefox, etc., but IE6 and 7 refuse to work correctly.
The page I am working on is:
http://www.vmtampademo.com/localangler/testpage.html
Most of the picture caption and headline of the middle column
is behind the picture. I attempted to force the info with a
seperating div which seems to work sometimes. I doubt that this is
the correct solution. What am I doing wrong?
Thank you for the help!

It looks fine in Firefox 2.0.0.1, Opera 9.10, and IE 7.

Layout problem in PDF conversion

Hi all,
i am downloading spool data using the function module CONVERT_ABAPSPOOLJOB_2_PDF. But i am facing layout problem. e.g. RFBILA00(financial statement generation program) has written balancesheet data to the spool. This spool data has some 6 columns. but CONVERT_ABAPSPOOLJOB_2_PDF is writing only first 3 columns to the generated PDF file. i used 'GET_PRINT_PARAMETERS' function module also with values like layout as 'X_65_132' and 'X_90_120'. but no success. if anybody knows the answer, please let me know.
Thanks in advance,
Naveen

Hi All,
i am following the below approach to download the information from spool.
program/spool output is an ALV List output data having 8 columns. but below approach is converting only first 5 columns in to PDF format. other 3 columns are getting truncated.
FUNCTION /ngl/download_spoolinfo_as_pdf.
""Local Interface:
*" IMPORTING
*"     REFERENCE(I_SPOOL_REQUEST) LIKE TSP01-RQIDENT
*"     REFERENCE(I_FILENAME) LIKE RLGRAP-FILENAME
*" EXCEPTIONS
*"      DOWNLOAD_ERROR
TABLES tsp01.
DATA: mtab_pdf LIKE tline OCCURS 0 WITH HEADER LINE,
        mc_filename LIKE rlgrap-filename.
DATA: mstr_print_parms LIKE pri_params,
        mc_valid(1) TYPE c,
        mi_bytecount TYPE i.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      copies                 = '1'
      cover_page             = space
      destination            = 'locl'
      expiration             = '1'
      immediately            = space
      mode                   = space
      new_list_id            = 'X'
      no_dialog              = 'X'
      user                   = sy-uname
      line_size              = 200
      line_count             = 65
     layout                 = 'X_65_200'
      layout                 = 'X_90_120'
      sap_cover_page         = 'X'
    IMPORTING
      out_parameters         = mstr_print_parms
      valid                  = mc_valid
    EXCEPTIONS
      archive_info_not_found = 1
      invalid_print_params   = 2
      invalid_archive_params = 3
      OTHERS                 = 4.
IF sy-subrc EQ 0.
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid              = i_spool_request
        no_dialog                = 'X'
        dst_device               = mstr_print_parms-pdest
      IMPORTING
        pdf_bytecount            = mi_bytecount
      TABLES
        pdf                      = mtab_pdf
      EXCEPTIONS
        err_no_abap_spooljob     = 1
        err_no_spooljob          = 2
        err_no_permission        = 3
        err_conv_not_possible    = 4
        err_bad_destdevice       = 5
        user_cancelled           = 6
        err_spoolerror           = 7
        err_temseerror           = 8
        err_btcjob_open_failed   = 9
        err_btcjob_submit_failed = 10
        err_btcjob_close_failed = 11
        OTHERS                   = 12.
    IF sy-subrc EQ 0.
      mc_filename = i_filename.
      DATA: lv_filename TYPE string.
      lv_filename = i_filename.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          bin_filesize = mi_bytecount
          filename     = lv_filename
          filetype     = 'BIN'
        TABLES
          data_tab     = mtab_pdf
        EXCEPTIONS
          OTHERS       = 22.
      IF sy-subrc EQ 0.
        WRITE:/ mc_filename, 'CONVERTED TO PDF AND DOWNLOADED'.
      ELSE.
        WRITE:/ 'PROBLEM WITH DOWNLOAD'.
        RAISE download_error.
      ENDIF.
    ELSE.
      WRITE:/ 'PROBLEM WITH PDF CONVERSION'.
      RAISE download_error.
    ENDIF.
ELSE.
    WRITE:/ 'PROBLEM GETTING PRINT PARAMETERS'.
    RAISE download_error.
ENDIF.
ENDFUNCTION.

Layout problem - multiple repeating frames

Hi, I have a layout problem, pls help!
Short report description:
- Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
- - Frame2 - contains all frames beneath - variable vertical elasticity
- - - Frame3 - variable vertical elasticity
- - - - some boilerplates
- - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
- - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
- - - - .. other repeating frames ..
When reaching the bottom of a page, and there is not enough room to print a record for Repeating frame 2, a record from Repeating frame 3 is printed in the bottom.
Next page starts with the remaining records from Repeating frame 2.. and then the remaining records from Repeating frame 3.
For example:
Page 1:
Rep frame 2 - Record 1
Rep frame 2 - Record 2
Rep frame 2 - Record 3
Rep frame 3 - Record 1 -- not enough space to print Record 4, so this record is printed
Page 2:
Rep frame 2 - Record 4
Rep frame 2 - Record 5
Rep frame 3 - Record 2
How can i ensure that all records from Rep frame 2 is printed before records from Rep frame 3?

Hi, thanks for helping me out!
I tried to use anchors, but they had no effect when connecting top of 3 to bottom of 2, got the same layout.
I then tried to create frames with vertical elasticity expand around both rep frame 2 and rep frame 3, and it seems to do the job.
- Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
- - Frame2 - contains all frames beneath - variable vertical elasticity
- - - Frame3 - variable vertical elasticity
- - - - some boilerplates
- - - - Frame 4 - vertical elasticity expand
- - - - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
- - - - Frame 5 - vertical elasticity expand
- - - - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
and so on..
Thanks again

Layout Problem in swings

I have an Layout problem. My Applications consists of a label and a panel in which some more labels are present.
The panel should contain the scrollbar in order to view all the label that excced the size of the panel.This label and a panel should be adjacent to each other.
My problem is, I am not getting the scroll bar to the panel when I am adding the label that excced the size of the panel, when I am adding the label adjacent to this label.

Did you use JScrollPanel? If not, use it.

[solved] layout problem in amarok 2.02

Hi,
Here, I have a bad layout problem with amarok 2.02. Amarok does not fit on my screen which is 1400 pixels large! I cannot reduce the part where the collection is shown. So that it is really unpractical to use.
I uploaded a snapshot to illustrate the problem (it is the full screen!):
emmanuelfavrenicolin.free.fr/Public/Sna … ok202.jpeg
Someone have the same problem ?
I tried to install svn version but I stopped after 3 hours of compilation, it is quite a big application.
Last edited by manouchk (2009-05-23 06:28:43)

Well, I tried amarok2-devel 2.0.90-1 but the problem of graphic layout remains similar, no improvement. Is it normall? Maybe amarok is only available for computer with screen >= 1600x1200 or is there an hidden configuration file where I could tweek this?
Last edited by manouchk (2009-05-18 02:41:03)

Urgent: Layout problem in "light inner page"

Hi Experts,
I am facing a problem in portal content area on external facing portal. I see a vertical scroll bar which restricts application from being displayed on entire screen.
I am getting this problem after a patching of EP 7.0, before patching every thing was running fine.
To me it looks like a layout problem in "light inner page", When I use "Light - 1: column (Full width)" layout I get a vertical scroll bar on portal. When I use default layout then this vertical scroll bar disappears but I see an empty navigation bar on left side which is not required.
Can some one advise a solution for this.
-Lave

hi,
Similar problem in this thread. check it out
Desktop inner page lost
Regardss,
Ganesh N

Div layout problem

Hi - stuck on what I think should be a fairly basic layout problem:
I have 2 divs, equal widths but varying heights, one floated to the left and one to the right so that they appear next to eachother on the page. The one on the left contains varying amounts of text, the one on the right contains a flash player so never varies.
Where the text for the left div is long, I want it to start off next to the player, but then flow beneath it rather than continuing downwards at the same width as the div. If I remove the width of the left div, so that it reverts to the container width, the player div positions itself below it, so I can't work out how to get the effect.
Can anyone help?

Hi,
hope I understood in the right way: I used (translated from German DW) "modify table" and so I got one more row and two columns in your Main_Content. In one of the new columns I copied the image and beneath I took the text (you now can replace with image and text of your choice), like this:
If that's not a help for your question, please ask me again.
What concerns the width of the pictures, I would format them with PS or a similar program in the same wide.
Hans-G.

Design/Layout Problem in OOTB SP "Docs I'm following" page

Hello
The "Docs I'm following" My Sites page in SP 2013 has the following layout problem:
Long document titles overlap with other elements (see also screenshot).
Note: This is default SP, i.e. we have not deployed any custom branding.
I guess this is a problem which can easily be corrected even without having to wait for a SP update. Since I'm not very good with design changes I would be grateful if you could provide
us with a quick fix, e.g. an updated css file.
Thanks a lot.
Best regards
John

Hi ,
For your issue, you can add the following code into your MySite MasterPage:
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function () {
$(".ms-contentFollowing-itemTitle a").each(function(i){
$(this).text(shorten($(this).text(),32));
function shorten(text,maxLength) {
var ret = text;
if (ret.length > maxLength) {
ret = ret.substr(0,maxLength-3) + "...";
return ret;
</script>
Best Regards,
Eric
Eric Tao
TechNet Community Support

Reuse_alv_grid_display TITLE problem after refresh

All,
I have a alv report using fm reuse_alv_grid_display. While calling initially this fm i am passing the grid tile in I_GRID_TITLE parameter. its displaying in grid, then after user click on the app toolbar button , i am doing some filteration , then coming back to grid the TITLE is missing in display
Any Info . below is the code snipet
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program             = sy-repid
     i_callback_pf_status_set       = 'F_PF_STATUS_SET'
     i_callback_user_command        = gc_user_com
     i_grid_title                   = gv_gtitle "<< passing initially
then in User_command i am filering some values on the basis of button clicked (Button placed in app toolbar)
FORM f_user_command USING p_ucomm    LIKE sy-ucomm
                          p_selfield TYPE slis_selfield .
    WHEN '&EXP'.
      perform f_expand.
      p_selfield-refresh = 'X'. "<<<----- refresh the grid
code for f_expand
form f_expand.
    CALL FUNCTION 'REUSE_ALV_GRID_LAYOUT_INFO_GET' " Getting current layout
      IMPORTING
        es_layout      = ls_layout
        et_filter      = lt_filter
        es_grid_scroll = ls_grid_scroll
        es_print       = ls_print
      EXCEPTIONS
        OTHERS         = 1.
" Here doing some filteration. ie append some values to IT_FILTER table for enabling then filter
    perform f_set_fltr_val_exp using lt_filter[].
    ls_layout-colwidth_optimize = gc_x.
    read table gt_sfieldcat into gv_fieldcat
                      with key fieldname = 'REGIO'.
    if sy-subrc eq 0.
      gv_fieldcat-no_out = ' '.
      modify gt_sfieldcat from gv_fieldcat index sy-tabix.
    endif.
* Set the grid title to include the parameters and the report type
CONCATENATE text-027 p_bukrs text-028 p_perio
              text-029 p_gjahr
         INTO gv_gtitle SEPARATED BY space.
    CALL FUNCTION 'REUSE_ALV_GRID_LAYOUT_INFO_SET'
      EXPORTING
        is_layout      = ls_layout
        it_fieldcat    = gt_sfieldcat
        it_sort        = gt_sort
        it_filter      = lt_filter
        is_grid_scroll = ls_grid_scroll
        is_print       = ls_print
      EXCEPTIONS
        OTHERS         = 0.
endform.                    " F_expand
a®

Hi All,
Thanks for your replies. I have done all that has been said. My problem is that when the user double clicks on the ALV without pressing the sort button in the ALV display, the index provided in the user-command subroutine is the same as the index of the record in the internal table. But, when the user sorts dynamically when the ALV is displayed and then double clicks, the index of the record provided by ALV is different from the index of that record in the internal table.
For example, when the ALV grid is shown a record is in the 1st row, and when the user double clicks now, the index of this record provided is 1 which is same as the index in the internal table.
But, after the user sorts in the display, if this record moves to the 5th row, the index provided by ALV will become 5, but, actually the index in the internal table is still 1.
Hope I have clarified my problem.
Thanks,
Sridhar

Alv layout problem ?

Hi everyone,
I generating 2 alv reports within a program.In the selection screen there are 2 radio buttons for different alv reports. First i selected the 1st radio button and executed the prog to get a alv report.Then i went to change layout and selected the required columns from the columns set and then saved the layout as the default layout.
Then I came back to the selection screen again.In the selection screen, in the parameter p_var there is default variant,so i cleared the parameter with no layout variant selected.then i selected the 2nd radio button and executed the program.Here the program is again taking the default layout (even though i cleared it in the selection screen )and generating the alv report according to that.But i don't want to use the default layout when i select the 2nd radio button,unless i select it from the variant list.How can i do that?
Any suggestions please?

Hi Hymavathi,
Thanks for the reply.Below is my code for the layout.If u can see any problem in the code please tell me the changes.Thank you.
PARAMETERS: P_VAR LIKE DISVARIANT-VARIANT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VAR.
PERFORM GET_VARIANT CHANGING P_VAR.               " ALV Layout
FORM GET_VARIANT CHANGING X_VAR.
PERFORM F4_ALV_LAYOUT(PPIO_ENTRY) USING I_GRID-PROGRAM
                                 CHANGING X_VAR.
ENDFORM.
perform alv_display.
FORM ALV_DISPLAY.
DATA: I_GRID-LAYOUT TYPE SLIS_LAYOUT_ALV.
SORT I_HEADER BY PLNBEZ AUFNR.
Define layout.
CLEAR I_GRID-LAYOUT.
I_GRID-LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
Set up Variant
I_GRID-VARIANT-VARIANT = P_VAR.     " Variant
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM             = I_GRID-PROGRAM
    IS_LAYOUT                      = I_GRID-LAYOUT
    IT_FIELDCAT                    = I_GRID-FIELDCAT
    I_SAVE                         = 'A'
    IS_VARIANT                     = I_GRID-VARIANT
TABLES
     T_OUTTAB                      = I_HEADER
   EXCEPTIONS
    PROGRAM_ERROR                  = 1
    OTHERS                         = 2.
ALV Failed.
IF SY-SUBRC <> 0.
    WRITE: / 'Failed with',SY-SUBRC.
ENDIF.
ENDFORM.
PERFORM ALV_DISPLAY_2.
FORM ALV_DISPLAY_2.
DATA: I_GRID-LAYOUT TYPE SLIS_LAYOUT_ALV.
SORT I_HEADER BY PLNBEZ AUFNR.
Define layout.
CLEAR I_GRID-LAYOUT.
I_GRID-LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
Set up Variant
I_GRID-VARIANT-VARIANT = P_VAR.     " Variant
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM             = I_GRID-PROGRAM
    I_CALLBACK_PF_STATUS_SET       = I_GRID-PF_STATUS_SET
    I_CALLBACK_USER_COMMAND        = I_GRID-USER_COMMAND
    IS_LAYOUT                      = i_grid-layout
    IT_FIELDCAT                    = I_GRID-FIELDCAT
   I_SAVE                         = 'A'
   IS_VARIANT                     = I_GRID-VARIANT
   TABLES
     T_OUTTAB                      = I_HEADER
   EXCEPTIONS
    PROGRAM_ERROR                  = 1
    OTHERS                         = 2.
ALV Failed.
IF SY-SUBRC <> 0.
    WRITE: / 'Failed with',SY-SUBRC.
ENDIF.
ENDFORM.                    " ALV_DISPLAY_2

Using null Layout - Problems

Hullo - I've written a little app that, because of the nature of what it does, prettymuch requires the use of null layout. It works well enough, but there are a few points where it does strange things that I don't understand. I haven't been able to find any good docs anywhere for how exactly layout/rendering works. The Swing tutorial, for example, almost completely ignores the topic.
Basically, I set the layout to null, add my components, use setBounds...but then nothing happens. In order for anything to be visible, I have to call pack() before I call show(). What is pack? What does it do? How can Sun's null layout examples work even though most of them don't use it?
Second, if I create JFrame of a certain size, and add a component that goes off the bottom of the JFrame (on purpose), then expand the size of the JFrame to reveal the bottom part of that component, it doesn't paint - there's just a grey area. No amount of repaint() pack() or anything will cause it to show. The only way I've found to do it is to make the JFrame larger to begin with, add the component so that it's visible, then resize to the smaller size, which is kind of ugly and clunky.
I basically do not understand why Swing is doing the things it does; why it paints sometimes and not other times, where it paints, when it paints, where it shows objects, how it packs them, etc. I would be very grateful if someone could englighten me!

Hullo - I've written a little app that, because of the
nature of what it does, prettymuch requires the use of
null layout. It works well enough, but there are a
few points where it does strange things that I don't
understand. I haven't been able to find any good docs
anywhere for how exactly layout/rendering works. The
Swing tutorial, for example, almost completely ignores
the topic.
Basically, I set the layout to null, add my
components, use setBounds...but then nothing happens.
In order for anything to be visible, I have to call
pack() before I call show(). What is pack? What
does it do? How can Sun's null layout examples work
even though most of them don't use it?
Second, if I create JFrame of a certain size, and add
a component that goes off the bottom of the JFrame (on
purpose), then expand the size of the JFrame to reveal
the bottom part of that component, it doesn't paint -
there's just a grey area. No amount of repaint()
pack() or anything will cause it to show. The only
way I've found to do it is to make the JFrame larger
to begin with, add the component so that it's visible,
then resize to the smaller size, which is kind of ugly
and clunky.
I basically do not understand why Swing is doing the
things it does; why it paints sometimes and not other
times, where it paints, when it paints, where it shows
objects, how it packs them, etc. I would be very
grateful if someone could englighten me!Okay, I think you should call setVisible(true); instead of pack then show. Pack basically organizes the components so they take up the least amount of room, and then it shrinks the frame to as small as it will go without hiding any components. It think if you call revalidate() instead of repaint(), should solve your problem.
The other thing to do, is (hehe) make your own components

Help needed with a layout problem

I'm trying to build a JTabbedPane where each tab has a grid of buttons. The number of buttons is variable, and I'd like the buttons to flow sort of like with FlowLayout, with four columns. I need all the buttons to be the same size, even across tabs. I tried GridLayout, which doesn't work when I have too few buttons to fill a row. It fails in different ways, depending on how I set things up. If I try to set the layout to GridLayout(0, 4) (four columns), then if one tab has one row and another has two, the buttons on the one-row tab expand vertically to the height of the two-row tab. If I try GridLayout(2,4), then if a tab has only one button, it expands horizontally to the maximum width of any of the tabs. (It also has the further problem that if the maximum number of buttons on any tab is 6, they are placed in a 2x3 array; I'm trying to get them to be 4 buttons on the first row and 2 on the second.)
I'm hoping there's a standard layout manager that can do the job, but I'm not too familiar with the Swing manager classes. Can I get what I want without writing my own layout manager?
Thanks,
Ted Hopp
[email protected]

I didn't think it was specifically a Swing question.Well, its either Swing or AWT, people who develop GUIs are the ones who are going to have experience using layout managers.
but if someone can point the way to how to do this with GridBagLayout, nested containersSince you finished reading the tutorial, what have you tried? You've explained your problems using a single layout manager, so what problems are you having using nested layout managers?
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

Help needed with Layout problem

Hello everybody
I need to insert components such as buttons in a JPanel using absolute positioning
I still cant dot this
even if I used the method setLocation for the component
I wanna know if I have to change the default layout for JPanel or whatever
thanks a lot

i found this quite useful:
http://java.sun.com/docs/books/tutorial/uiswing/layout/visual.html#border
dont know if it will specifically help with your absolute positioning problem.

MM PO Layout problem

Hello MM gurus,
I seem to have a peculiar MM issue which I am not able to figure out. Whenever I display a Purchase Order using ME23N in the QA system, I am able to see field column such as Tracking Number in the Item overview (not Item details). When i try to view the same PO in the Production system, i do not see that column at all.
I have already
a) Checked the customizing settings " Define Screen Layout at doc level" between QA and production. No Anomalies there. (I have checked NBF and PTOF field groups)
b) checked if there are any variants present in the PO layout - Everything Standard. No Variants at all.
c) Checked if is it because of any personalised settings in the PO and again could not find anything interesting there.
d) Checked prior postings for a similar problem in Sapfans and couldn't find any.
So my fellow MM'ers, any help that you could offer would be greatly appreciated.
Regards,
Arvind

Hello,
I had already tried whatever you had suggested. I cannot see the "Administrator" button when i login to Production. This could probably be an access issue. But what baffles me most is that when i view the settings in production by looking at the entries in TCVIEW table, the check in the Invisible column for this field (BEDNR) is not there. which means it is visible. But when i display in the PO it is not visible. I tried to very carefully hover my mouse over these fields so that i can catch it and expand it. But to no vain.
Regards,
Arvind

REUSE_ALV_GRID_DISPLAY layout problem

Similar Messages

Maybe you are looking for