Reuse the UITextView inside UITableViewCell

Developers,
            I have added uitextviews as a subviews in uitableviewcell. I have about 4 columns and 30 rows in custom cell. Now the problem is that i have to alloc everytime new uitextview , thats why scrolling of tableview have become very slow, cells take so much time to load.
           Can anyone tell me how can i alloc my textview only once and reuse that for other cells also.
                                                                                                                             Thanks.

yes. I am using table cell instance. But i also want to reuse the textview which is the subview in the cell. Since there are dynamic number of columns ,sometimes 2 or 3 maybe 4, an i am filling the table row wise. First 3 starting elements in first row.then other 3 uiviews in second row. I used custom cell but while filling the third uivew in the row the first two are overlapped by the third one. Please tell me how can reuse the cell as well as the subview which is uiview..

Similar Messages

  • Change UIbutton color inside UITableViewCell

    I have a simple problem ... but its turning into a very difficult problem .. i have a button inside uitableviewcell and want to change its color through code .... i could aceive it by changing its background image. But its kinna hazy ... its not the solid color ... and when i use [cell.button setBackgroundColor:[UIcolor redColor]] ... the button color does not change ...
    any help appreciated
    thanks

    Thanks for the fast answere.
    Unfortunately there is no effect when I include
    buttonName.backgroundColor = UIColor redColor;
    In my application I have a NSTimer which calls every 2 sec. a method which should change the color of the button. I would be also happy if the display blinks red and normal...

  • Reusing a GUI inside of another GUI

    Hello,
    I wrote a class called Chat for a simple chat GUI for use in an applet by calling add(new Chat());in the applet class. I would like to reuse this class in an application version. I add it to a JFrame with chatWindow.getContentPane().add(new Chat()); and everything shows up and works. The problem is any menu's I add to a JMenuBar in the JFrame extend behind the GUI drawn by the Chat class. Is there any way to reuse the original GUI inside a JFrame and have menus work correctly?

    Is you chat class derived from Component (without a "J")?
    See http://forum.java.sun.com/thread.jsp?forum=57&thread=339966 (eewest):
    "You can force the menu that pops up to be a heavy weight component with the following line of code:
    JPopupMenu.setDefaultLightWeightPopupEnabled(false);This way, when you bring up a menu, it will be brought up in a heavy weight component, which should appear over your content pane."

  • How to get the values of the objects inside an object??

    Hi,
    I am trying to write code to display name and memory usage of all session attributes, in a recursive way.
    I suppose reflection is needed here, but I can’t figure out how to get the values of the objects inside an object...
    private void handleIt(String attributeName, Object attributeValue) {
         boolean isPrimitiveOrNull = ((null == attributeValue) ||
              (attributeValue.getClass().isPrimitive()));                                         
         if (isPrimitiveOrNull) {
              sb.append("{" + attributeName + ":" + sizeOf(attributeValue) + "}");
         } else {
              sb.append("{" + attributeName + ":" + sizeOf(attributeValue) + "{");               
              Field[] fields = attributeValue.getClass().getDeclaredFields();
              int lim = fields.length;
              String name;
              Object value = null;
              for (int i = 0; i < lim; i++) {
                   name = fields.getName();
                   //LOOK AT THIS LINE: !!!!!!!!!!!!!!!!!!!!!!!!!!!
                   value = fields[i].get(obj); //I don´t know what 'obj' should be??
                   handleIt(name, value);
              sb.append("}");               
    Any suggestions will be greatly appreciated...

    I realized that massive int objects called MAX_VALUE, MIN_VALUE and SIZE where causing the StackOverflow, so I removed them from the analysis.
    This is the resultant code. But I think it isn’t accurate in calculating the real size of objects being got using reflexion.
    Do you or somebody have any more suggestions?
    import java.io.ByteArrayOutputStream;
    import java.io.IOException;
    import java.io.ObjectOutputStream;
    import java.lang.reflect.Field;
    import java.util.Enumeration;
    import javax.servlet.ServletException;
    import javax.servlet.http.HttpServlet;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpServletResponse;
    import javax.servlet.http.HttpSession;
    public class SessionMeasurer extends HttpServlet {
         private static final long serialVersionUID = 1470488362727841992L;
         private StringBuilder sb = new StringBuilder();
         public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
              performTask(request, response);
         public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
              performTask(request, response);
         public void performTask(HttpServletRequest request, HttpServletResponse response) {
              HttpSession     session = request.getSession(false);     
              String attributeName = "";
              Object attributeValue = null;
              for (Enumeration<?> attributeNames = session.getAttributeNames(); attributeNames.hasMoreElements();) {
                   attributeName = (String)attributeNames.nextElement();
                   attributeValue = session.getAttribute(attributeName);
                   handleIt(attributeName, attributeValue);               
              System.out.println(sb.toString());
         private void handleIt(String attributeName, Object attributeValue) {           
              if (attributeValue != null) {          
                   boolean isPrimitive = attributeValue.getClass().isPrimitive();
                   if (isPrimitive) {
                        sb.append("{" + attributeName + ":" + sizeOf(attributeValue) + "}");
                   } else {
                        sb.append("{" + attributeName + ":" + sizeOf(attributeValue) + "{");               
                        Field[] fields = attributeValue.getClass().getDeclaredFields();
                        String name;
                        Object value = null;
                        int lim = fields.length;
                        for (int i = 0; i < lim; i++) {
                             name = fields.getName();                                                                                                         
                             if (!name.endsWith("_VALUE") && !name.equals("SIZE") && !name.equals("serialVersionUID")) {
                                  try {
                                       value = fields[i].get(attributeValue);
                                  } catch(Exception e) {
                                       //PENDIENTE: Tratamiento excepción
                                  handleIt(name, value);
                        sb.append("}");               
         private int sizeOf(Object obj) {
              //Valid only for Serializables
              ByteArrayOutputStream baos = new ByteArrayOutputStream();
              ObjectOutputStream oos = null;     
              byte[] bytes = null;               
              try {          
                   oos = new ObjectOutputStream(baos);
                   oos.writeObject(obj);
                   bytes = baos.toByteArray();
              } catch(Exception e) {               
                   //PENDIENTE: Tratamiento excepción
              } finally {
                   if (oos != null) {
                        try {
                             oos.close();
                        } catch(Exception e) {
                             //PENDIENTE: Tratamiento excepción                         
                   if (baos != null) {
                        try {
                             baos.close();
                        } catch(Exception e) {
                             //PENDIENTE: Tratamiento excepción                         
              int size = -1;
              if (bytes != null) {
                   size = bytes.length;
              return size;          

  • How can I make rectangular speech bubbles that adapt to the text inside them without the "arrow" that points towards where the bubble is coming from getting changed?

    I have to make lots of speech bubbles (150+) that all have texts inside them which differ in length. I want the speech bubbles to look the same in terms of style, but I need different sizes of course for each text. This means that the rectangular part of the speech bubble should adapt in length and width to the text inside it, while the "arrow" pointing towards where the bubble is coming from (e.g. the person who speaks) should stay the same on every bubble. So is there a way or a workaround to make such "adapting" speech bubbles?
    I appreciate any kinds of help
    Thanks in advance!

    Here's another way I found:
    1. Draw a speech bubble. Mine is a rectangle with rounded corners and a triangular pointer added with Pathfinder > Add
    2. Drag out a frame the same size as the speech bubble. Select the speech bubble and Copy; then select the empty frame and choose Edit > Paste Into...
    3. Alt-Drag the frame with the pasted speech bubble to make a copy, then crop one copy to leave only the top of the bubble showing, and crop the other copy to leave only the bottom.
    4. Drag out a text frame and insert a table consisting of 1 column, 3 rows. Set the text frame to Autosize > Height Only.
    5. Set the stroke/fill of the top and bottom rows to none, and style the middle row to match the speech bubble, (in my case a white fill and 2pt stroke; left and right).
    6. Anchor (paste) a copy of the speech bubble top in the top table row, and a copy of the speech bubble bottom in the bottom row.
    Getting the 3 parts to match up with is where you just have to work on it until you get it right. Use the positioning tools in Anchored Object options and the column width setting in Cell options to line everything up.
    Enter your text in the middle row. (Hey, look at that...a valid application of Comic Sans!) With the Cell Height set to an "At Least" setting, the cell will expand to fit whatever text you enter, pushing the the bottom row down, with the text frame auto-sizing to keep everything in play...

  • Unable to ping device behind Cisco 3750 on the same inside VLAN via Cisco ASA 5505 Anyconnect VPN

    Hi Guys,
    I've been stuck with this for the last 2 days, and I thought to try and use Cisco's forum, I setup my home DC, and started having problems once I moved a Cisco 5505 behind a Cisco 1841 router (I wanted to eventually test DMVPN live on the internet,) I was no longer able to ping some devices, then as soon as I introduce a collapsed core/distribution switch, I'm also no longer able to ping the devices behind the Cisco 3750, I've attached a network diagram and the ASA running-config.
    Everything seem fine internally with the exception of an intermittent network connectivity with a Citrix NetScaler VPX running on a VMware ESXi.
    For some odd reason, I am able to ping the following, with no issues.
    Cisco 3750 SVI (192.168.1.3)
    CentOS web server (connected directly to the Cisco ASA 5505)
    I have checked and enable the following:
    Nat Exemption
    Sysopt connection permit-vpn
    ACL's
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    Added ICMP in the inspection policy
    Packet-capture - Only getting echo requests.
    Thanks in advance!

    Hi,
    I believe you have the problem with your no-nat configurations..... you to exempt NAT for the traffic from 172.16.10.0 (Anyconnect VPN pool) to 192.168.1.0/24 (Inside LAN) to make this work
    object network acvpnpool
    subnet <anyconnect VPN Subnet>
    object network insidelan
    subnet <inside lan subnet>
    nat (inside,outside) source static acvpnpool acvpnpool destination static insidelan insidelan
    Make sure that you are able to reach the GW/Inside ip adress of the firewall from LAN machine.... all routing in place properly..... Thanks!!!
    Regards
    Karthik

  • How to open a URL without session ID and reuse the current browser session?

    Hi All,
    I have a question about HTMLDB 2.0
    How to open a URL without session ID and reuse the current browser session?
    That was the behaviour in HTMLDB 1.6 ...
    My usecase for this is the following:
    We have written an issue tracking application, which sends e-mail to the interested users, when something happens.
    In these email we've put a link to some page, with some parameters in the URL.
    The idea is for the user to be easy to click on the hyperlink and to see the details of the ticket.
    When the user clicks on such a link he is directed to a login screen (page 101) and he enters his Username and password, and is then forwarded to the details for the ticket.
    Then he receives another email (e.g. for another ticked). He clicks on the link and :
    a) in HTMLDB 1.6 he goes to the details as he didn't close his browser and session is remembered
    b) in HTMLDB 2.0 he is prompted to enter username, password with the username populated
    Please tell me how can I achieve the same behaviour in HTMLDB2.0 as it was in HTMLDB 1.6.
    I understand this change is somehow security related, althogh I don't understand how. If you can explain this either I would be very happy?
    Best regards,
    Mihail Daskalov

    Mihail - I detailed a couple of approaches here: Re: Application Link
    Scott

  • Is it possible to reuse the Scanner instance in this case?

    I have a data file that gets updated by another process, and in my program I periodically read the file, and if there'S new data added I will update my data structure (contained in ArrayLists).
    The issue is for every read I have to re-create a Scanner instance and skips all the lines that have been read. Since the file could get really long, and to skip lines in the file we need still to call scanner.readLine() which might be expensive since it interacts with the hard disk, I'm trying to reuse the Scanner instance and count on the scanner.hasNextLine() to return true if new lines are inserted to the file by the other process:
    while (in.hasNextLine()) {
    String line = in.nextLine();
    // intepret th eline here
    This code is put in a Runnable that is executed periodically, and I was hoping that the next time it is called in.hasNextLine() would return true and we can happily start where we were left off.
    But the bloody method does NOT return true even though new lines have been added to the file. Does anyone know to make it recognize that the file has been updated? Or really there's no other way but to re-open the file and skip old lines as I'm doing now?
    Any suggestion would be highly appreciated!
    P.S: How could I add code tags to highlight my code portion? Thanks!

    808239 wrote:
    I have a data file that gets updated by another process, and in my program I periodically read the file, and if there'S new data added I will update my data structure (contained in ArrayLists).Is there any reason you can't use a Stream instead of a file? Unix has a nice little utility called 'tee' that allows you to write out to a file AND stdout, allowing you to connect other commands via a pipe. I'm sure you could write something similar for Java; however, if this is intended as a daemon process, you'd probably have to make it non-blocking, which might be an issue.
    Alternatively, have you considered using a database instead of a file?
    Winston

  • Reusing the name of a deleted Organization in OIM 11.1.1.5.2

    I want to reuse the name of a deleted Organization in OIM 11.1.1.5.2. Can you tell me how can I do this, this is a test environment so auditing is not important here!

    I found the record as you said:
    select act_key, act_cust_type, act_name from iam_oim.act where upper(act_name)='IADVISE';
    ACT_KEY ACT_CUST_TYPE ACT_NAME
    41 Company iAdvise
    I think removing is the best option for me but what to you mean with all dependencies ?
    Can you also tell me what you mean with "Change the status from DB itself for testing purpose" ?

  • Is there any way to print  the data inside  the Notes field of MIR6 Report

    Hello Gurús.
    We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
    Is there any way to print  the data inside (comments)  the Notes field as well in the Report  ?
    We found that the only way is to open the Notes and print it, but it takes time, any idea ?
    Rgds.
    MCM.

    There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.

  • How to recognize the text inside a text box

    we have a scenario where we are validating the text inside a text box. Actually, we are inserting a text matching test on a node.
    The scenario is like this:
    When we open the screen it contains 6 text boxes.
    We have to enter the text in the first 3 text boxes and save.
    Then based on the entry the values are populated on the other three text boxes.
    We have to validate the values in these text boxes , so we click and highlight the value.
    Openscript identfiy the text box ,but it did not identify or recorded the values we have highlighted.
    How to make the openscript recognize the values? Can we do it through menu options or else we need to write the code?
    Any help will be appreciated.

    I answer to myself:
    Put all inside a PanelGroupLayout and set the layout to SCROLL.
    Edited by: baol on Mar 15, 2010 9:09 AM

  • I would like to save footage to a hard drive and stiill be able ot edit the footage. I would like to reuse the cards on the  same project. Is this a sensible option. Camera JVC  GY-HM100

    Hello I wonder if anyone would be able to help.
    I have a JVC GY-HM100. I have footage from a ongoing project saved on SDHC cards. I want to save money by reusing the cards while i carry on working on the same project.  I wondered if I could save the footage from the SDHC card too a hard drive ; delete the footage from the cards and reuse them. would i still be able to edit the footage stored on the hard drive alongside the footage which will be imported straight from the camera..  I have heard that this camera works well with final cut pro but if the info is saved to a hard drive first and subsequent footage is straight from the camra and SDHC cards will it work or is it a false economy to reuse the cards.
    Hope that makes sense
    Lindabob

    "I wondered if I could save the footage from the SDHC card too a hard drive"
    Yes.
    "delete the footage from the cards and reuse them."
    Yes.
    "would i still be able to edit the footage stored on the hard drive alongside the footage which will be imported straight from the camera.."
    What program are you using to edit? If Final Cut Pro there is an entire forum with FCP experts who can guide you:
    https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

  • How to increase the size of text boxes in FCPX without stretching the text inside?

    How to increase the size of text boxes in FCPX without stretching the text inside?

    There are two basic Title formats — I should say Layouts — available:  Text (plain) and Paragraph.  (The plain text version usually does not appear with the blue dot controls — those generally appear for the paragraph type control.)
    If the Title is using a Paragraph layout, it's like having a mini version of Text Edit available inside FCPX. You can tell when you click on the text (when the title is selected) -- a rectangle will appear around the text like so:
    double clicking on the text will give you the bounds controls which you can use to redefine the text area without distorting the text. Once selected, notice the button that appears in the top right corner of the canvas:
    Pressing that will activate the ruler. You can right click on the ruler and add Tab Stops (left, right, center and decimal.)
    So if the title uses paragraph formatting, you can create a very WYSIWYG type of display text (use the Text inspector to alter text selections within the paragraph bounds.)

  • How to change the color of the links inside a portlet ?

    Hi,
    I have to apply a css into one of the portlets of my page. Since I thought it would not be easy I figured out that the only thing the client cares is the color of the links inside the portlet. The portlet has a bunch of links and these link should be blue and 12pt. Does somebody know how to do that ?
    Thanks,
    Rafael.

    Change hyperlink color:
    There are about 50 predefined styles with each template. They are modifiable. Hyperlink is one of the styles.
    Follow this process:
    • In your document select a word of text, any word will do.
    • Style it the way you want your hyperlinks to look.
    • Show Styles Drawer from the View menu.
    • Find the Hyperlink style in the drawer and right-click on it.
    • Select - Redefine Style from Selection - in the pop-up menu.
    That's it. You've changed the hyperlink style for this book.

  • How to change the size of the text inside a label?

    Hello,
    I would like to change the size of the text inside a label.
    Is there any way to do it Web DynPro?

    Hello Roy,
    Not possible. WDLabelDesign contains only 2 values: STANDARD and LIGHT. As workaround you can use TextView. It supports a lot of "designs" (e.g. label_small).
    Best regards, Maksim Rashchynski.

Maybe you are looking for