How to recognize the text inside a text box

we have a scenario where we are validating the text inside a text box. Actually, we are inserting a text matching test on a node.
The scenario is like this:
When we open the screen it contains 6 text boxes.
We have to enter the text in the first 3 text boxes and save.
Then based on the entry the values are populated on the other three text boxes.
We have to validate the values in these text boxes , so we click and highlight the value.
Openscript identfiy the text box ,but it did not identify or recorded the values we have highlighted.
How to make the openscript recognize the values? Can we do it through menu options or else we need to write the code?
Any help will be appreciated.

I answer to myself:
Put all inside a PanelGroupLayout and set the layout to SCROLL.
Edited by: baol on Mar 15, 2010 9:09 AM

Similar Messages

How to recognize the linked text boxes in In Design

How to recognize the linked text boxes in In Design? I mean is there any indication, where I will come to know so an so tex boxes are linked together?
Thanks in advance.

HI Peter,
well In Quark Express as as wrote earlier, that you can see other text frames highlighted immediately, after you select any of the text frame among the threaded text frames, say there are 5 text frames which are threaded together, even if I click on 2 nd or say 4th text frame, it shows me all the text frames highlighted which are threaded together, so If I am working in a catalog which has multiple pages, it's easy for me to see which text frames are threaded together, as if you make any text changes, say add or delete text in a text frame, the other text frames get affected by that. I mean text shifts accordingly, it's easy to track in Quark which text frames will get affected if I change something in a threaded frame.
Anyways, it seems this option is not available in In Design. That's fine. I am not in preview or Overprint previed mode.
Thanks for your help.

How to read the content of a text file (by character)?

Guys,
Good day!
I'm back just need again your help. Is there anyone knows how to read the content of a text file not by line but by character.
Please help me. Thank you so much in advance.
Jojo

http://java.sun.com/javase/6/docs/api/index.html
package java.io
InputStream.read(): int
Reads the next byte of data from the input stream.
Implementation:
InputStreamReader
An InputStreamReader is a bridge from byte streams to character streams: It reads bytes and decodes them into characters using a specified charset. The charset that it uses may be specified by name or may be given explicitly, or the platform's default charset may be accepted.

How to reduce the level of free text / direct purchasing

A common problem at all sites is how to reduce the level of free text / direct / non catalogue based purchasing. This is where users enter an account assignment and free text instead of using an existing material number.
This is often the case because it is too "dificult" for the user to search and find the correct material number.
How have other sites handled this?
has anyone found a solution that if a user enters lets say "paper" into the free text box, a pop up appears with a match on possible materials with the word "paper" in the short description? This sounds like a pretty easy function to implement? Does anyone have the code?
Cheerio

>
Ravi.or.raj wrote:
> The search function you ask for is pretty much a standard functionality.
> In ME21N , click on "Personal Settings" , and select the check box "int search help on" .
Yes this works, but you have to tell that the user has to enter the text in the material number field, then SAP will search thru the database.

How to change the font size of text and case in smartforms

hi,
could any one explain how to change the font size of text in smartforms. ex. previously i had taken P4 left aligned and C6 but now i want to decrease the font without making it bold. pl......... guide me
secondly the value which are coming from tables are upper case but i need lower case. pl. guide
thanking u

check out the smart styles...create a font of ur size n use.
Define the paragraphs & character formats using SMARTSTYLES & use them in your smartform.
You have to give the smartstyle name in the Form attributes-->Output options for the formats to be used in your smartform.
You can define font size in Smartform Style.
Smartform Styles > Charcterformat> Font --> size.
to load the font to SAP server chk this
Re: Adding a new font for SAPscript/SMARTFORM output
Regards
Vasu

How to change the font size of text element in smartform

Hi
i want to know how to change the font size of text element in smartform
regards
Gincy

Hi
You can create Smartstyles, in which you can define paragraph formats for texts and character formats for character level changes.
Paragraph format ---> alignment, font size etc
character format for ---> superscript, subscript.
After creating, in your smartform, there will be a option in the text element to enter a style.
You give the created style and you can use the paragraph and character formats i that style.
Hope this is clear..
Regards
Sekar

How to change the font size of Text Box Properties Appearance tab into 2 decimal digit.

How to change the font size of Text Box Properties Appearance tab into 2 decimal digit. I am uanble to modify it to 5.38 pt for example. Its only allowing to 1 decimal place.

Click on each field and the choose Properties from either File menu (or if on Mac hold dow mouse button until context menu appears choose properties)
go to Font
choose desired size and type font,you can choose to make this the default.
Do this with each field.
Or if you have a lot of fields:
while one is selected select all of them
then go to fonts in properties
change Font and size and make default.

How to change the font size of Text box tool ?

How to change the font size of Text box tool ?
I am using Acrobat PDF 6.0
Tools > Advanced Commenting > Text Box Tool
I need to know how to change the font size. The default font size is too big.
let me know
Thanks

I do not have AA6 available right now (I can check at home this evening). I am also using AA Pro, not Std. In AA7, there is a text box tool that is a commenting tool. When I started typing, a properties toolbar came up that had the font size and such. I haven't figured out how to get the toolbar after the fact. In AA8, I selected the text box tool and then went to view and selected the properties bar (the font size and all showed then), or use Ctrl-E when editing the text. I have not been able to figure out how to edit the text in a text box after you have created it - think it is a mental block right now. Bill

How to color the background of a text line in mail

How to color the background of a text line in mail
The forum has a message dated 2005 that this cannot be done, has the recent OS made this a feature.
I still caanot seem to see any where it is available.
Thanks
Greg

greg1424 wrote:
Does pages do that?
Yes.
I also have Office for MAC but rarely use it as it is too cumbersome for me.
Microsoft Office does it also. So does Libre Office, Open Office and just about any full function word processor app.
Dan

How to write the resultset into a text file

how to write the resultset into a text file

You can use the java.io.* package to write to files.
API: http://java.sun.com/j2se/1.5.0/docs/api/java/io/package-summary.html
Tutorial: http://java.sun.com/docs/books/tutorial/essential/io/index.html

How to clean the dust inside the screen of the iPod Touch?

Hi everybody,
lately some dust entered inside the screen of my iPod Touch.
At first it looked like one or two pixels were gone bad, but it is just some annoying dust.
The problem is that I cannot figure out any way to remove it.
I tried a gentle blow from the connector hole but the result was worse.
Any idea on how to clean the screen inside?
I hope it is not necessary to go to an Apple Center and pay for the "cleaning service".
Regards,
Andrea

It sounds safe to use
'Falcon's® "Professional" Dust-Off® "XL" compressed-gas is the perfect product for removing dust from your color transparencies before making scans or copy slides; it's also great for removing dust from cameras, lenses, computers and other electronic equipment. Each 12 oz. disposable can comes with its own trigger value and a 4.75" nozzle extension (a red tube) that allows you to place precise bursts of compressed air just where you want it.'
Check the directions on the back... also check the contents. Normally anything like that will inform you of contaminants harmful to delicate electrical devices.
If its just compressed air make sure you keep the can well back from the source.. and unplug the G5 (take it somewhere you don't mind dust.. there no point doing this in situe, just for it to suck it back in again!)
Also.. as mentioned.. keep the can upright (as the air is decompressed the can gets very cold)
Stu
Powermac G5 2.5 Mac OS X (10.4.2) 460gb HD 3gb RAM

How to capture the multiple value in list box

Hi forums,
       How to select the multiple values in list box and how to catch that values in OnInputProcessing.
Regards,
Ravi.

Hi,
A possible method is:
Get all fields of the form
    CALL METHOD request->get_form_fields
      CHANGING
        fields = table_fields.
loop over the fields
    LOOP AT table_fields INTO wa_fields.
test the name of the field
      CASE wa_fields-name.
        WHEN 'test'.
retrieve the value of the field
          test = wa_fields-value.
endcase
endloop.
Eddy

How to change font size of text inside a "text box" form the Drawing Markups?

Hi,
I expected there to be an option to change the font size after I selected the text and right-clicked, but no, there is only one option that allows you to change the text style but not the font size.
Does anyone know how to change the font size?

Don't know what the e-mail is about, why not just log into the forums. In any case, it does not sound like a text box, but one of the other text options (like the Typewriter tool). The regular text edit tool allows you to edit the text and fonts in a regular text box. Select the box and use ctrl-E. You may have to select the text edit tool (name changed in AAX) first. Such editing is not really recommended. Editting in Acrobat should be limited to simple changes, and those often become a pain. The best method of fixing the problem is in the original document and then creating a new PDF.

How to skip the first row in Text file (in Sql Loader)

Hi All,
How to say the control file to skip the first row of the text file..
i just going this example
this is my text file:
01308201222455038130820122245503813082012224550382
1090358 474661834012245503813082012 0075 0 00000000000 000000000 00000130820120000000000000000 136.84 -833.3911082012 000000 000 009035847466183 090358 47466183 0015007514300000970001430000097700BH1150274792012081320120811201208122012-08-11-22.45.50.38369899999.0075LIQJGL17
Control file:
OPTIONS
DIRECT = TRUE ,
PARALLEL = FALSE ,
SKIP = 1,
ERRORS = 0
UNRECOVERABLE
LOAD DATA
INFILE <"FILE_DIR">
BADFILE <"FILE_DIR">
INSERT
INTO TABLE DAILY_TRANSACTION
WHEN (1:1)='D'
TRAILING NULLCOLS
Above the Eaxmple text file i need to Skip the first row which is
01308201222455038130820122245503813082012224550382
please can anyone suggest me is this correct?
if not please correct me please
since two days i been serching but i didn't get any thing
Thank's
Edited by: Lavanya on 24-Sep-2012 00:51

Lavanya wrote:
Hi Jeneesh,
Thank you for your prompt replay
I didn't try to load this control file
And i need one more question
I have Text file in my Machine which Contains very huge data so i was wrote one control file for that, and i got FTP connection also as well as.
My question is firstly I need to PUT the Text file Into Unix Server isn't?
so when i trying to put the text file into unix it's giving an error
ftp>put c:/abc.txt
Not connectedYou haven't succesfully made your FTP connection to the server.
e.g.
c:\>ftp
ftp> o testserver
Connected to testserver.mycompany.com.
220 testserver FTP server ready.
User (testserver.mycompany.com:(none)): myuser
331 Password required for myuser.
Password:
230 User myuser logged in.
ftp>then you can use FTP to put your data to the server. Remember, if you are transferring a text file from a windows based operating system to a unix server you need to put it in ASCII mode...
ftp> ascii
200 Type set to A.
ftp>which will automatically convert the windows CR/LF pairs to the single LF character used by unix.

How to save the RichTextBox Content in Text file

hI ,
I NEED TO SAVE THE RichTextBox Content in text file ?

If this IS a LabVIEW question, here's an example of how to load a rich text file (to help if you don't know how to get a rich text in LabVIEW).
If you have a Rich Text Box, you can use the invoke method "SaveFile" to match the function you linked to.

How to recognize the text inside a text box

Similar Messages

Maybe you are looking for