Revealing extra buttons in a Rollover???

I am looking to create a button that will automatically reveal another 3 buttons as a rollover. When you highlight a button that is not within the 3 they should disappear. I understand that one way of doing this is to make another menu and have the rollover automatically link to the other menu showing the other buttons, but unfortunetly I need this to work on a laptop and doing it this way only seems to work on dvd players. It does work on the laptop in a sence, but to reveal the other buttons you need to actually click on the link rather then just roll your mouse over it.
Is there any way I can make this happen????
Cheers,
Jesse

What you have you have described is the method that comes closest to making rollovers, no good/100% reliable way to do so - some players may respond to the rollover without clicking, some may not.

Similar Messages

[SOLVED] Extra Button in GNOME Status Menu

Hello,
I'm going to have to apologize right off the bat for this rather vague question, but I really don't have much to go on (yet). I've done a lot of Googling to try to figure this out but nothing has turned up so far.
Now that that's out of the way, here's the problem:
An extra button has shown up in my GNOME status menu. The image is a link to a (slightly) higher quality version. The button doesn't seem to do anything, except when I click it the icon changes to this:
A second click restores the first icon, and the cycle repeats. I'm running GNOME 3.14, and the icon showed up a couple weeks back while I was having a DE install-fest and trying out Cinnamon and KDE. As far as I can tell, it showed up around the time I set those up, but that could also just be a coincidence. Now that that adventure is through, Cinnamon and KDE have been uninstalled and I've done my best to rm any remaining config files. My second Arch machine has no such button (and has only ever run GNOME). Honestly, it doesn't make any practical difference, so I ignored it at first, but its unexplained existence has come to disturb me.
I've tried searching for others with a similar problem, looked at GNOME extentions that themselves add a button (such as https://github.com/arelange/gnome-shell … ate-status), and perused through the GNOME-shell source code in an attempt familarize myself with what was going on. I'm rather inexperienced with that sort of programming, so my endeavor was not as insightful as I had hoped. As a final act of desperation, I ran
pacman -S gnome
but of course, with no success. If anyone could point me in the right direction or offer suggestions, it would be very appreciated!
Last edited by threeofsix (2014-11-02 05:04:57)

Ahh, yes, I think you are right. In fact, my relatively old and bulky Acer 5742 does have an accelerometer (presumably for HDD shock protection?):
$ cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Acer BMA150 accelerometer"
P: Phys=wmi/input1
S: Sysfs=/devices/virtual/input/input13
U: Uniq=
H: Handlers=event11 js0
B: PROP=0
B: EV=9
B: ABS=7
I checked and the bma150 module wasn't loaded, so I went ahead and loaded it and started waiving my 5.7lb laptop around like a madman. No screen rotation, and I'm not sure how to read the raw input from the device, but I'm sure there are a plethora of reasons GNOME might detect an accelerometer and put a button there even if it isn't designed for this sort of input or properly configured or supported. If that's the case, there's no need to figure out how to get rid of the button, but I am curious if other people have similar experiences or perhaps the opposite (you can see an accelerometer but no button) just for some level of certainty this is the correct explanation. For starters, my other machine that does not have the button also does not have an accelerometer listed in /proc/bus/input/devices.

[SOLVED] G602 Gaming mouse extra buttons detected as keyboard keys

I have a Logitech G602 mouse with a bunch of extra buttons. I am familiar with xmodmap, xinput, xbindkeys, and easystroke.
If I use xev to test for input events, my back/forward buttons work like most mice- I get values of button 8 and button 9. However, when I use the other extra mouse buttons, I get IDENTICAL values to pressing 1, 2, or 3 on the keyboard respectively.
As an example, say I open a terminal. I can press these extra mouse buttons and it will "type" 1, 2 or 3 into the terminal just as if I had hit those numbers on my keyboard. If I hit shift, it will "type" !, @, and # just as if I had typed on the keyboard.
If I change the keycodes, I lose function of my 1, 2, and 3 keys. If I use xbindkeys to bind a command to the extra mouse buttons, pressing 1, 2, and 3 on the keyboard will run those commands!
The only thing I can think of is using a different keyboard layout, or that the mouse isnt supported at the kernel level (pressing extra mouse keys with X killed again "types" 1, 2, or 3) and I need to file a bug report somewhere. Where upstream do I file a bug report if this isnt fixable?
Any ideas at all?
Last edited by GSF1200S (2014-03-12 17:12:47)

Perfect Gentleman wrote:I got Razer Naga 2014 Left-Hand. It has 12 buttons that are the same with 1-10 buttons of keyboard. You can only re-arrange 1-3 buttons or not, and that's all you can do.
As I understood remapping of these buttons works fine only in Windows with its windows drivers and software.
For those with or looking to buy a Logitech G602, the answer is unfortunately Windows for a fix I had figured beforehand that it was some kind of assignment issue as I didnt see it possible for 2 different devices to be assigned the same keysym, but thats apparently due to my lack of understanding how such codes are assigned.
After reading the above response, I installed the Logitech software on a buddys windows computer and changed the (top 3) buttons to Shift, Alt, and Super- this allows me to use shift/alt/super + left/middle/right click for use within my wm (Openbox). This is a permanent change until you change it again, so at least you only need windows once.
I had searched around to see if anyone had this mouse working with Linux, but couldnt find any mentions. I can now at least confirm for others all the buttons will work and will be detected if you reprogram the mouse from windows. You can even reassign the battery check G6 button (which I did) and the DPI settings buttons near the left click (I left those alone for gimp work).
I tried Wine for the software without much hope, and indeed while the software installed fine, the program couldnt detect the mouse with it plugged in. It has been my experience that device detection in wine is a crapshoot at best. Anyways, problem solved..

Button and 'disjointed' rollover

I have put a button in the first frame of a movie clip and a
graphic and the second and third frames. The graphics give the
appearance that the button is being highlighted in a way different
than when you actually roll over the button itself. I am doing this
so that when you rollover a button you can show other buttons with
the secondary highlights.
My questiona are, why does my button loose its own behavior
when I attach a behavior to the movie clip it is contained in?
How can I get both the 'disjointed' rollover and the buttons
own rollover to work at the same time?
my test files
swf -
btnTest2.swf
fla -
btnTest2.fla

Thank you for your reply, I think I understand the 'why' now.
What I mean by the secondary highlights is what I show on the
right-side of my example. I want to mouse over a button and have
another button become 'highlighted' in a way that is different than
the normal button over or down state.
I'm really trying to solve this. I can make it work if I use
a movieclip for all of the button 'states' of up, over, down,
highlight 1, highlight 2 (each in their own frame). I then just add
all of the 'go to frame 2' kind of code and the 'go to frame 4 in
this other button' kind of code to the movieclip. The problem is
that I have 77 of the same 'button' symbol on one page, thats alot
of code to make mistakes with. And I can't make a symbol with all
of the code for 'go to frame 2 on mouseover' already in the
movieclip symbol or I run into the same problem i already have.
Please help me understand this, it seems like it should be
simple.

Invisible submit button with image rollover

I have a need to combine a rollover image with a form submit
button. I need the submit button to not be visible except for those
that know where to look.
I have a database query that displays rows of data. Each row
has a checkbox to select that item, so the data table is in a form;
the checkbox is a cfinput. In order to pass the parameters of the
checked items, a submit button must be used to submit the form
values.
My need is for the submit button to be the rollover image.
Only users that know where to find the rollover image will be able
to submit the list of checked form values. "Regular" users
shouldn't be in that area of the screen.
So, a combined rollover image submit button is needed.
Ideas? Thanks...Rick...

document.yourformname.submit didn't work.
But then discovered that the href value needs to be empty (or
"#") to work. This code works: (rollover images with the submit()
code):
<a href="#"
onClick="javascript:submit()"
onmouseover="MM_swapImage('Image9','','images/change-meeting-date.png',1)"
onmouseout="MM_swapImgRestore()">
<img src="images/blank-hidden-area.png"
name="Image9"
width="111"
height="11"
border="0"
id="Image9" />
</a>
When, in DW, you add the rollover image, you need to leave
the href value empty. I suppose that lets the submit button use the
<cfform action...> value as the results page, letting the
form values pass to the results page.
Now, the next step is to have two different rollover images
with submits() that point to two different result pages, while
still using one cfform. (Two submits in one form, each submit
pointing to a different results page.)
...Rick...

Hyperlinks within a button / button within a rollover button?

Hi folks,
I'm quite the newbie here (print designer trying my hand at multimedia news projects), so I apologize in advance for sounding stupid a bit too often.
OK, so I'm working on a project, and it's going OK. What I want to do is for the user to rollover a button/object, and a little pop-up box will show up, and it will have some text/photos/... Pretty routine stuff. That I can accomplish without a problem...
Now, what I want to add in there is also a hyperlink that will open a Web page in a new window. And that's where I get stuck. It won't let me.
I assume it's because part of the rollover thing in the button symbol. That's how I'm doing it so far.
So, is there anything I can do going that route, or do I need to take another approach?
I'm thinking the other option would be to create a movie clip, which would hold the pop-up box and the photos and the like, then make a button within that which would hold the hyperlink. Then, I could create an object right on the timeline with a rollOver that would trigger the movie-clip instance.
Does that make any sense?
I'm using CS3, but I also have access to CS4 if needed.
Thanks in advance for your help!

Hi Ned,
Thanks for the reply. I think I know what you mean. So anything that's triggered with a button cannot have anything inside triggered again.
To put it pretty simply, this is what I have:
There's a fever chart, and there are several points that I would like highlighted along the way.
So, when I roll over, say, the highest point, a balloon of sorts would pop up. It would have some text and photos and whatnot, but it would also have hyperlinks.
So... What's the best way to approach it?
I'm thinking the balloon of sorts would be its own movie clip, and all the goodies would be inside of it.
Now, to trigger it, should there be an object converted to a symbol to trigger it? Then, should I do a on(rollOver) kind of thing? When I roll over it, it would play that instance.
Or, the other option would be to do a rollover that would go to a certain layer/frame and play that.
What do you think?
Again, I'm sorry about my ignorance.
Thanks!

Button enlarges via rollover

Hi fellow Musers,
Just a quick question. My client wants me to create a button rollover (image) that enlarges. Can someone help me how to do this if its possible.
thank you
Andy

Hi Andy
I believe you want a button which should expand on rollover. This can be done using tooltip.
Drag the trigger in position ,align it properly on page and select show target on rollover. You can either keep both aligned on page or you can place the trigger behind target area and make both trigger and target size in such a way that on rollover it would create an effect as the button is enlarging.
Let me know if you have questions.
Thanks,
Sanjit

Close Button For the Rollover Sidelet: Size issue?

Hi all,
I am building a slide that incorporates a rollover sidelet.
Since the audience of my tutorial includes some older users, I
would like to make sure that all of the content is easy to view.
My question is this: can the 'close' button that appears in
the top right of the sidelet be enlarged? Currently, the sidelet is
set to 'stick' for an extended period of time: I would like users
who want to skip its content to easily close it, and then continue
the tutorial.
Thanks for the help!
AM

Welcome to our community, AM
Unfortunately we have no control over the size of the button.
You should probably make a request to the development team to
consider adding this in the future.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick

Button focus if rollover for 3 seconds

Hi all,
Is it possible to achieve the same effect as clicking a
button by holding the cursor over it for a few seconds? If so, how
would I achieve this?
Many thanks,
Paul

NOT TESTED === NO FLASH ON THIS COMPUTER.
But you want something that will start a timer on you
rollover, fire another
event after three seconds, and quit the timer when it reashes
3 seconds or
when you roll out.
myMovieClip.onRelease = handleRelease;
myMovieClip.onRollOver = handleRollover;
myMovieClip.onRollOut = handleRollout;
var mydate = new Date();
function handleRollover() {
var mytime = mydate.getTime();
this.onEnterFrame = fucntion() {
if (mydate.getTime() - mytime > 3000) {
this.handleRelease();
delete this.onEnterFrame;
function handleRollout() {
delete this.onEnterFrame;
function handleRelease() {
trace("It worked");
"Outside5.com" <[email protected]> wrote in
message
news:euj727$lcl$[email protected]..
> Hi all,
>
> Is it possible to achieve the same effect as clicking a
button by holding
> the cursor over it for a few seconds? If so, how would I
achieve this?
>
> Many thanks,
> Paul

Animation jumps to button keyframe on rollover

I have what I hope is a basic question. When I view my animation in browser, it plays fine, but if I rollover the animation (with the mouse) at any point while it is playing, it jumps to the keyframe where I have a button set up. I'm hoping that this is a simple action that I am forgetting to set? Any help is appreciated! Thanks,

Please share your composition for us to check it out.

Adding a button to a rollover state

I made the register page with imageready for the graphics,
over/click/out states... then saved the optimized as html and user
dreamweaver to add the check boxes text forms... now i need to add
a button or a link to an image so that it sends the information to
my database... i am using XAMPP for MySQL, Apache(PHP), and some
other stuff am not to aware of it yet... Now i also want to be able
to find a person who is able to help me also with my database
issues so i am able to use it correctly
Ok, maybe i need to be more specific... I made the graphics
part of the page in Imageready, i then saved its optimized version
of it into html and images, portion of the graphics has an images
that have OVER/CLICK/OUT states and i need to make that into a
button using dreamweaver, if possible i would like to know how to
implement into the page

var someObject:MovieClip; // this is declared - only
var someObjectMovieClip = new MovieClip(); // this is declared and instantiated
Make sure your code uses aghains and not instancename like your code shows.
I don't think you understand the third and fifth items I listed either. The third is saying that the code is not in the same frame as the item it is trying to target. The fifth has to do with objects in consecutive frames, not linking.
If you followed what I mentioned in the last sentence you should have a line number indicated in the error message that will tell you which line is causing the problem. Whatever line that is, the object doesn't exist as far as the code sees it. So if it was the line...
instancename.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_28);
I can guarantee you that there is no object named instancename in the frame where you have that code since it is the only object targeted in that line of code.

Manually adding a Extra button in the application tool bar of the view cluster.

hello Colleagues ,
I have created a couple of maintenance view , and with this two maintenance view i have created a view cluster using the transaction SE54.
Now, there is default Application toolbar gets generated when a view cluster is created. (screenshot attached.)
Now i have a requirement where i can add another button (syntax Check button in the screenshot 2) in the same view cluster. (screenshot attached.)
Want to know the feasibility of this requirement.
Thanks in advance
Shavneet Singh

Hello,
Not sure of your exact reqt
But got some sample code to create a button on the toolbar which once clicked gives a new popup window with additional parameters
TABLES:SSCRFIELDS.
**Create the Additional Selection screen to input filename
SELECTION-SCREEN: BEGIN OF SCREEN 10.
PARAMETERS: P_FILE TYPE RLGRAP-FILENAME.
SELECTION-SCREEN: END OF SCREEN 10.
**Create Application Toolbar Button on the Standard selection Screen
SELECTION-SCREEN FUNCTION KEY 1. "Its fcode will be FC01
PARAMETERS : P_WERKS TYPE MARC-WERKS.
INITIALIZATION.
SSCRFIELDS-FUNCTXT_01 = 'Enter File'. "Assign the Text to the Button
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM. "Check the Fcode
WHEN 'FC01'.
CALL SELECTION-SCREEN 10 STARTING AT 5 8 ENDING AT 85 20.
ENDCASE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME' "Local file browser
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = P_FILE.
START-OF-SELECTION.
***Your list processing.

Extra buttons on each row of a report?

Hi,
I would like to add multiple buttons in front of each row in a report.
When a button is pressed a Pl/SQL statement should run with access to the PK ID of that row.
Also, it is important that I can add other buttons as well (edit, delete etc)
What I want to accomplish, for example:
I want to have an add event button on each line of a scheduled production run, this should then branch to a new page on which first a hidden item (set to pk id) and visible item (pk info) is set to those of the row on which the button was pressed.
I hope that makes sense.
Please let me know how I can to do this,
Thank you so much for any help!!!

open the page, click the RPT link to the report column attributes of that region. choose the field you wish to alter (click the edit icon) then change under the "column link" section to an href. I have used a call to a javascript function in the URL box e.g. "javascript:show_the_page(#ADD#);" and included a javascript function within my app to handle this (read in PK and open a page in a new window with the PK as a variable)

Is it possible to add a extra button to each separate slide of a slideshow?

I'm using a 100% width slideshow with text on each slide. I want a button 'read more' on each slide that links to the exact page. I know the button can be integrated in the text of the slide but i want it separate. To have a different colour and spacing. Can somebody help me?
For example I inserted an image. I know how to make the white box separate for each slide but i can't make the read more button separate for each slide.

Create your Read More box.
Highlight the end of you text inside your caption box.
Copy and paste your Read More box at the end of the text string.
You can move the white background up to separate it from the Read More box (see attached image).
You can also use the Wrap feature to move the box around.

GridBagLayout adding extra buttons on the second row

Here is a classic example of GridBagLayout taken from javadoc. I wonder is there a way I can have "Button6b", "Button6c" and "Button7" added to the same row as "Button6" and "Button6a"?
import java.awt.Button;
import java.awt.Font;
import java.awt.GridBagConstraints;
import java.awt.GridBagLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.WindowConstants;
public class ButtonsExample extends JPanel {
    protected void makebutton(String name, GridBagLayout gridbag, GridBagConstraints c) {
        Button button = new Button(name);
        gridbag.setConstraints(button, c);
        add(button);
    public void init() {
        GridBagLayout gridbag = new GridBagLayout();
        GridBagConstraints c = new GridBagConstraints();
        setFont(new Font("SansSerif", Font.PLAIN, 14));
        setLayout(gridbag);
        c.fill = GridBagConstraints.BOTH;
        c.weightx = 1.0;
        makebutton("Button1", gridbag, c);
        makebutton("Button2", gridbag, c);
        makebutton("Button3", gridbag, c);
        c.gridwidth = GridBagConstraints.REMAINDER; // end row
        makebutton("Button4", gridbag, c);
        c.weightx = 1.0;
        c.gridwidth = GridBagConstraints.RELATIVE; // next-to-last in row
        makebutton("Button6", gridbag, c);
        makebutton("Button6a", gridbag, c);
        makebutton("Button6b", gridbag, c); // I'd like this
        makebutton("Button6c", gridbag, c); // and this
        c.gridwidth = GridBagConstraints.REMAINDER; // end row
        makebutton("Button7", gridbag, c); // and this button to appear on one row
    public static void main(String args[]) {
        JFrame f = new JFrame("GridBag Layout Example");
        f.setDefaultCloseOperation(WindowConstants.DISPOSE_ON_CLOSE);
        ButtonsExample ex1 = new ButtonsExample();
        ex1.init();
        f.add("Center", ex1);
        f.pack();
        f.setSize(f.getPreferredSize());
        f.setVisible(true);
}

Welcome to our community, Kristi
As for why we aren't able to add buttons to Question Slides,
only the Captivate developers know the answer. Perhaps there is a
technical issue involved.
About the only thing I can think of would be to insert an
image of the buttons in a disabled state. At least that may provide
some consistency for you.
Cheers... Rick

Revealing extra buttons in a Rollover???

Similar Messages

Maybe you are looking for