Reversal document type for cancelation of goods movement

Hi
I have one queries, my client requirement is for every reversal document - document type should be YY. I created document type YY and maintain in every document type in FI for reversal document type.
The document which is posted through FI and if we take the reversal of that perticular document document type is coming YY only.
But the document which is posted for goods movement document type is coming WA, WE &  WL and if we take the reversal for that document system generating same document type WA, WE &  WL .
Awaiting for your reply.
Regards
Anjan

Hi Anjan,
Pls try tocde OMBA
Regards,
Kiran

Similar Messages

  • Change the reverse document type for RE.

    Hi,
    We want to change the reverse document type for document type RE, can any one sugget the possible negative impact.

    hi
    kindly note that if you are creating a new document type to be assigned as the reversal document type for RE then you need to assign the appropriate number range interval for the year.
    if you are going to assign an existing document type as the reversal document type for RE then you will not be able to distingush the past and the new documents generated as both of them shall belong to the same document type.
    regards
    eashwar
    Edited by: eashwar1 on Apr 15, 2010 2:38 PM

  • Document type for outgoing Excise invoice

    Dear Expert,
    I would like to maintain different document type for Excise document generated at the time of J1IIN transaction. At present system generating document type SA. So we need to maintain different number range for these documents instead of SA document number.
    I have maintained document type ED in Tax on goods movement - Basic Settings - Maintain company code settings, but still system taking document type SA.
    Please advice.
    Thanks,
    Krishna Kumar

    Hi,
    for outgoing excise invoice document type setting as above mentioned same path
    Hi
    pls maintain document type below mentioned path
    Tax on Goods Movements
                   India
                             Basic Settings
                                       Maintain Company Code Settings
    whatever marked UTL FI DOC type for excise outgoing excise invoice
    in that your maintain company code against ED document type
    Thanking you
    Regards
    Mahesh

  • Allocate a different document type for Initial  mayetial Upload document

    Dear experts ,
    i want to assign a differnt document type for initial goods reciepts that is through MIGO - 561 movement type .
    By default the system takes it to be WA . I want to assign some other document type for MIGO-561 .
    Where do i make the assignment ?
    regards
    Anis

    I dont think you can do this.
    from OSS Note 18614 - MMIM: Transaction/event type for goods movements
    The transaction/event type (field: T158-VGART) for goods movements is set in table T158 for the transaction code. This transaction/event type cannot be set via Customizing.
    Additional key words
    Cause and prerequisites
    The transaction/event type has a program control function. If the customer sets the transaction/event type, this may lead to errors. For this reason, the setting should not be possible via Customizing.
    Solution
    Please do not change the transaction/event type in table T158. You should look for alternatives to reach your aim without making any changes.
    Can you explain why you want to do this, what do you want achieve with a new transaction type?

  • Document Type for invoice reduction

    Good day,  the SAP Library mentioned of invoice reduction due to price variance.  We use txn MIRO for invoice verification,  following process as in SAP library;  when posting error occured No separate type exist for invoice reduction.  When adding the Document type for invoice reduction in txnOMR4, I've used KG (Credit memo) also used KA, but these postings (credit note) go to the Goods Received/Invoice Received, is it possible that these credit memo created by the system go against the vendor?

    u do not need any separate document type for invioce reduction
    what u need to do is select the invoice reduction varaint from layout in miro
    system will genrate 2 fi document after posting in miro
    1 will be invoice
    2 will be creedit memo

  • Configure PO document type for "High sea Sale"

    Dear sir,
    Pl. tell me step by step how can i configure new Document type of Purchase order for "High sea Sale" business senerio without GR.
    Thanks/
    Anurag

    Hi,
    In normal case, when you do GR w.r.t. a Normal PO then system updates Stock Quantity as well as Stock Value of Material.
    But in case of High Seas PO, you don't want GR to happen, you want to carry out LIV directly based on PO. So in this case there won't be Stock Quantity updation as well as Stock Value updation i.e. Expense Account will get psted during LIV against Vendor Account. So your High Seas PO should be account assigned PO.
    So to achieve this, create a separate document type for High Seas PO with allowed Item Category as Blank" i.e. Standard.
    Path: - SPRO > MM > Purchasing > Purchase Order > Define Document Types
    OME9 - Create an Account Assignment Category as "Z" (High Seas PO) by copying "K" and in the detailed screen of the same deactivate "Goods Receipt" indicator.
    Now create PO with this Document Type and Account Assignment Category "Z" and check under "Delivery" Tab Page, "Goods Receipt" indicator will be deactivated that means GR not required for this PO.

  • Different Document Type for a standard transaction

    Dear all,
    Iu2019m facing the following problem: I wish to set a different Document Type for a standard transaction.
    In the specific, I need a different DT for Reverse Document (T-code FB08) instead of standard SA.
    Is that possible?
    Thanks in advance
    Alberto

    Go to OBA7, click on doc type of the original document (which I guess is SA) and then update the field "Reverse Doc Type" to the doc type you want to.

  • Reversal Document Type

    Hi Gurus,
    "If you have not specified a particular document type for reversal, the system reverses documents using the same document type as that used to post those documents during internal number assignment."
    The above was extracted from sap help documentation. What is the pros and cons of using a different document type for reversal document. I have maintained many system and most of system uses the same document document type for reversal documents. Anyone knows what is the preferred settings and could explain to me? The pros and cons of both using the same/different document type for reversal document.
    Thank you.
    Regards,
    Wilson

    Hi ,
    The concept of using a differnt document type for reversal is for tracking purpose .
    For eg. for vendors if you want to segregate the invoice and the revesal document for the same you can do that .
    it is for the conviniency and tracking purpose that you can have a different docuent type for reversal .
    Cheers ,
    dewang

  • Reverse document type

    what is meant by reverse document type?

    Hrishi:
    Lets say you made a payment to vendor for $200, the document type used in this case would be ZP.
    Now later on you find out that you paid the wong vendor, in this case you need to reverse the entry and you would use the document type ZV.
    Why: It helps in segregating different transactions. You can make out type of the transaction without looking at debit adn credit. Secondly, you know that for ZP document type Vendor should be credited and some other account like a GL account/asset account should be debited AND vice-versa for ZV, this way you can spot mistakes if a clerk has used wrong debit/credit for ZP and ZV.
    Assign points if info helps
    Vj

  • How to create a new document type for PO and Requisition

    Hi All
    Can you please help me with the steps of creating a new document type for PO and PR. Also the steps that need to be update for the procure pay cycle to work properly. 
    Once the document type is been created. I want to create the PO referecing the new PR and PO document type.I am new in MM.
    Thanks, Ros

    Hi,
    1. You can create new PR and PO docu types at the following path:
    For PR docu type:
    First you need to create number range for docu type or you can use existing number range also. The path for creation of no. range is
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Number Ranges
    Then create PR docu type at below path and assign no. range to PR docu type here only
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types
    For PO docu type:
    Follow same procedure as mentioned for PR docu type. Path is
    SPRO>Materials Management->Purchasing->Purchase Order->Define Number Ranges
    SPRO>Materials Management>Purchasing->Purchase Order->Define Document Types
    If you want to create PO referencing new PR docu type, link the PR docu type to PO docu type at below path:
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types--> Link purchase requisition - document type
    Regards
    Chetan

  • How to block one of the purchasing document types for certain period

    My client asked me to block the one of the purchase order documents for certain period.In what way i can do it? and also it shouldn't be displayed in the purchase documents list when we do me21n?
    Advanced thanks,
    Sateesh

    Hi Sateesh,
    Here u cann't block the Document type,
    U can do this,only the way to delete that document type for certain peroid.
    Thanks & Regards
    Suresh
    > My client asked me to block the one of the purchase
    > order documents for certain period.In what way i can
    > do it? and also it shouldn't be displayed in the
    > purchase documents list when we do me21n?
    >
    > Advanced thanks,
    > Sateesh

  • Creation of new document types for document splitting rules

    Hi experts,
    We have copied from existing SA  document type to new document type.
    In standard SAP  SA  document type - define document splitting rule, we have select  "NO INHERITANCE OF ACCOUNT ASSINGNMENT", when posting the  GL document SA  document type without mapping partner profit center,system is control the derive the partner profit center.
      Our requirement is  copied from existing  SA  document type to create a new document type - we have created the new dusiness transaction variant and we have map the "classify document type to document splitting rule " and we have selet the "No inheritance of account assignment" while posting in FB01 GL document with out mapping partner profit center system is not control the " derive partner profit center".
    Could you please assist us as soon as possible
    Thanks ,
    Sreenivas
    Edited by: sapfico.srini12 on Jan 16, 2012 4:37 PM

    Hi,
    In order to create a document type for a purchase requisition  use the path
    spro-materials management - purchasing--purchase requisitions --define  document type
    in that screen you select the document type you want to copy to create your document type and perform the action.
    if you want to change the screen/field selection for your document type select the field selection key (if you select the document type as NBB the field selection key will be NBB.,and go to the screen and change the field status.
    Hope this will be suffient for your requirement.
    Regards,
    Raghu.

  • Two different billing document types for 1 sales document type.

    Hi Gurus,
    I have a requirement , wherein our client is having counter  sale.
    He is using one sales doc type , and while creating a order , he is manually adding payment terms.
    Requirement is , if the payment terms are cash, billing doc type created later on should be one , else during credit sales , billing document type should be different.
    As per my understanding this is not possible.
    Want to know if anyone has some different thought on this.
    Thanks in advance
    Nilesh.

    Dear Nilesh,
    There two options you can look in to
    One option is
    1.You can define different sales document types for cash and credit.
    2. You can define two different billing documents.
    3.Do the copy control settings for each combination
    Cash sales order >Delivery>Cash invoice
    Credit sales order >Delivery>Credit invoice
    Second option is
    1. You can maintain single sales document for both the processes.
    2.Define two different billing types then do the copy control settings for both billing types.
    But in this option user need to select the billing type manually based on the process while creating billing document.
    I hope this will help you,
    Regards,
    Murali.

  • PO document type for third party PO...?

    Hello friends,
    My client's requirement is that third party PO should have different document type, say ZTRD?
    I tried to configure the same with PR and PO doc types.  I created new PO type ZTRD. I maintained the combination of PR doc type NB with item cat S to PO doc type ZTRD with item cat S. I also deleted the standard config i.e. combination PR doc type NB with item cat S to PO doc type NB with item cat S.
    I created third party SO which created third party PR (doc type NB). But when I tried to convert this PR into PO, still with above config, I am getting error - Doc. type/item cat. NB/S (requisition) <-> NB/S (purch. order) error.
    Please help me to configure the Z doc type for third party PO. 
    Thanks in Advance,
    Pat.

    Hi
    Please try the following, do not delete the standard settings
    1) Create Z document type for PR and assign this document type to relevant Schedule line Category  ( CS for example) in SD
    2) Create Z document type for PO and keep only Item category S & Z document type for the Item category S created for PR.
    Hope it helps.
    Thanks/Karthik

  • New document type for shopping cart /PO

    Hi Gurus,
    I have created a new transaction type ZSHC for Shopping carts in SRM. I have given it a new  number range.
    while creating a shopping cart , how do i ensure that my shopping carts get created with this transaction type?
    is there any attribute which controls this ?
    Regards,
    Mangesh

    Thanks Shrini for your response.
    BADI "BBP_CREATE_BE_PO_NEW" does not exist in SRM 4.0. The corresponds BADI in SRM 4.0 is "BBP_CREATE_PO_BACK".
    The documentation of this BADI says that it can be used to change all data TRANSFERRED TO THE BACKEND SYSTEM to create a purchase order.
    I would want the document type to be selected when the PO is created in SRM and not when SRM transfers the PO to the backend. Because in that case I fear that SRM can have one doucment type and R/3 would end up having different document type for same PO.
    I will activate the BADI and keep the thread posted.
    Thanks
    Venkatesh

Maybe you are looking for