Reverse button function in environment...

Okay....I must be crazy, but for the life of me I can't get this to work---here's the situation...
I have a Cable Switcher set up to open and close MIDI Paths in a comprehensive MIDI Patching mixer....It works like a dream, however, when I change the display (Style) of the switch to say Button 6 (On/Off button), the function of the button works in reverse...as in, when the button reads 'On', the connection is Off, and when Unlit, the connection is On....
I have attempted using a tranformer after the output of the switch with the following parameters:
Conditions ........................Operations
Status: =Meta....................Fix, Meta
Channel: All.......................Thru
-1-: =0..............................Flip, 1
-2-: All..............................Thru
To my knowledge, this should work--but it does not....anyone have any clues as to how I could accomplish this....it would make my MIDI Mixer look sooooo much nicer
Thanks!

Hey auxn,
I don't see a button 6 but I do see lots of buttons. Button 6 style works here on a cable switcher. You should be able to do this w/o transforming
By switch order I mean: Routing assignments can move around if connections are deleted. Changing the cabling can change routing. As an example
Create a fader
cable it to a button 6 style cable switcher
Create 2 monitors, each fed by different channels of the cable switcher.
Move the fader, press the button, note the routing
Delete the cable on the top out of the cable switcher
Cable the monitor which is unconnected (not using undo)
Move the fader, press the button, note the routing is now opposite
So what would probably work best is trash the trafo, and switch the order of the routing channels by deleting the top cable and then reestablishing the connection (like reversing the polarity of the routing).
Hope that works for you, J

Similar Messages

  • Re: [iPlanet-JATO] Back Button functionality

    Hi Mike,
    Our test environment does not include proxy server.
    regards,
    syam.
    Please respond to [email protected]
    cc:
    Subject: Re: [iPlanet-JATO] Back Button functionality
    Guys,
    Please clarify something for me, the JATO code is commented as follows
    protected void addResponseHeaders(RequestContext requestContext)
    // These values should make any proxy between the client and
    // server avoid caching, and ensure that pages from one user
    // can never be seen by another user (if they're cached anyway)
    requestContext.getResponse().addHeader("Pragma","no-cache");
    requestContext.getResponse().addHeader
    ("Cache-Control","private");Yet you make no mention of whether your test environment includes a Proxy
    Server, or does your browser
    go directly to the Application Server's web server?
    Can you clarify, please?
    ----- Original Message -----
    From: <syam_reddy@p...>
    Sent: Wednesday, April 25, 2001 2:59 PM
    Subject: [iPlanet-JATO] Back Button functionality
    >
    Hi,
    We observed the following difference in behaviour between JATO pages
    and NetD served pages.
    We have the following scenario. User will login to the
    site. After login he will get a frame set. This frame set has threeframes.
    Top and bottom frames are used for navigation (to switch between various
    sections on the site.) .The middle frame(main frame) shows the actual
    content. When the the frame set gets loaded main frame shows page1. User
    will click on a link on page1. Page 2 will be loaded in main frame. Atthis
    point if the user clicks on back button , with migrated application(JATO
    pages) the following message appears in the main frame.
    In Netscape Communicator 4.61 the following message appears in the main
    frame :
    Data Missing
    This document resulted from a POST operation and has expired fromcache.If
    you wish you can repost the form data to recreate the document by
    presenting the reload button.
    In IE 4.72/5.5 the following message appears in the main frame:
    Warning : Page has Expired
    The page you requested was created using information you submitted in a
    form.This page is no longer available.As a security precaution, Internet
    Explorer does not automatically resubmit your information for you. To
    resubmit your information and view the web page click teh refresh button.
    However, in the NetD site page1 will appear in main frame.
    How do we mimic the NetD behaviour with the migrated
    applications ?
    We think the above behaviour with migrated Apps, is due to the
    headers that are get set in Application ServletBase , see the following
    code snippet :
    protected void addResponseHeaders(RequestContext requestContext)
    // These values should make any proxy between the client and
    // server avoid caching, and ensure that pages from one user
    // can never be seen by another user (if they're cached anyway)
    requestContext.getResponse().addHeader("Pragma","no-cache");
    requestContext.getResponse().addHeader
    ("Cache-Control","private");
    If we comment the above code , we were able to mimic theNetD
    behaviour. Are there any alternatives/thoughts on how to mimic the NetD
    behaviour ?
    Thanks in Advance,
    syam&ravi.
    [email protected]
    [email protected]

    OK, here's what I'm trying to do: We have, like you said, a menu
    page. The pages that it goes to and the number of links are all
    variable and read from the database. In NetD we were able to create
    URLs in the form
    pgXYZ?SPIDERSESSION=abcd
    so this is what I'm trying to replicate here. So the URL that works
    is
    pgContactUs?GXHC_GX_jst=fc7b7e61662d6164&GXHC_gx_session_id_=cc9c6dfa5
    601afa7
    which I interpreted to be the equivalent of the old Netd way. Our
    javascript also loads other frames of the page in the same manner.
    And I believe the URL-rewritten frame sources of a frameset look like
    this too.
    This all worked except for the timeout problem. In theory we could
    rewrite all URLs to go to a handler, but that would be...
    inconvenient.

  • Is there a way to reverse the Function (Fn) Keys on the ThinkPad T540p and Windwos 8.1?

    I recently purchased an I ThinkPad T540p, and install there Windows 8.1 Enterpirse.
    Then I download and install all drivers from lenovo site including upgrade BIOS to version 2.07
    Then I have noticed that the default for  the keys where  F1 and F2, etc. usually are, are now the mute and volume buttons.  To access the F1, F2....F12 keys, you now have to press Fn + your desired F key.  
    Is it possible to reverse the Function keys?  I would much rather press Fn + F1 to mute than have to press press Fn + F1 to access F1.   
    Thanks you in advance.
    Solved!
    Go to Solution.

    Hi,
    Welcome to Lenovo Community Forums!
    Check in BIOS -> config -> Keyboard if there is an option to switch between default and legacy mode.
    If you don’t find that option, you may try the Fn+esc combination that changes the function keys to legacy mode, but when the computer reboots, it might reset back to a default mode and you have to use Fn+esc again.
    Hope this helps!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Is it possible to disable the Export Application Button/functionality

    Hi fellows,
    I need to disable the export button/functionality in a customer's apex installation (3.2.1) as part of the security measures.
    Customer do not want developers to be able to export the applications they have access to. As the internal application is not editable (is it with some sort of trick??) , does anyone ever had this requirement and know how to do it?
    Thanks in advance for your support.
    JP

    Hello,
    >> I need to disable the export button/functionality in a customer's apex installation (3.2.1) as part of the security measures.
    >> this need applies for both development and production enviroments although if a solution is available, it will be first tried in the development enviroment.
    I agree with Tyler, this is indeed a really strange request. If your customer can’t rely on his developers, I would say you have a problem. I’m saying it because disabling the export button, even if it’s possible, doesn’t really give you any kind of protection. A malicious developer can still export APEX application using the Java utility APEXExport; it can be done with SQL Developer; it can also be done on a page level, and I only named the documented options.
    I don’t think this type of action should be considered for a development environment. Of course, the production environment is a completely different ball game. You can use the APEX run-time only environment, and by that neutralize most of the developer related “risks”.
    Just my 2 ¢,
    Arie.

  • Flash 8 Skins- Mute Button function

    Hi There,
    I'm trying to reskin one of the skin flas to customise my
    flash player, but I dont know how to reverse the MUTE Button
    function ( ie, I want the movie to be MUTED when I publish it
    instead of having it default with the volume ON}- Can someone
    please help me with the actionscript function to enable this?
    thanks

    I have only found one workaround to this so far, and it is
    not quite what you both want, but it will start the video muted.
    The video will unmute when you click anywhere on it. Give the
    FLVPlayback component the instance name of vid, then attach this
    code to the frame:
    vid.volume = 0;
    vid.onPress = function(){
    vid.volume = 100;
    delete(this.onPress);
    ========================
    That will set the volume to 0 before it plays. Then when you
    click anywhere on the video the volume is adjusted to 100. I have
    been unable to figure out how to just tell the mute button to be
    enabled at start.

  • Button functionality

    Hello,
    I have an input form and defined two buttons like mentioned in this thread:
    Regarding Buttons Functionality in INPUT FORM
    I can call two different function modules.
    In my case I mant to call the same function module but with different parameters.
    I have a function module which delivers me sales orders. I want now a button with the text 'All sales orders' and a second button with 'Open sales orders'. The result is always a list of sales orders, and so I want the output in a <b>single</b> table view instead of two.
    How can I achive this?
    I use VC 6.0 Patch 6
    Regards Michael

    Hello Michael,
    I had exactly the same problem. My solution is:
    2 fields on the input-form
      ALL_ORDERS and OPEN_ORDERS.
    1. I defined for the Field ALL_ORDERS Initalization
      FILL ('X',1)
      and Formating: IF(UPPER(@OPEN_ORDERS)=='X',' ','X').
    2. OPEN_ORDERS  Formating  UPPER(@OPEN_ORDERS).
    So it works like Radio-buttons.
    Regards
    Gerd

  • Override "Email a Page link" in ribbon button functionality in SharePoint 2013

    Hi,
    I want to override "Email a Page link" ribbon button functionality on the ribbon control.
      <CustomAction Id="Ribbon.WikiPageTab.Share.EmailPageLink"
                    Location="CommandUI.Ribbon"                
                    Title="Custom Email this page">
        <CommandUIExtension>
          <CommandUIDefinitions>
            <CommandUIDefinition Location="Ribbon.WikiPageTab.Share.EmailPageLink">
              <Group
              Id="Ribbon.WikiPageTab.Share"
              Sequence="30"
              Command="ShareGroup"
              Description=""
              Title="$Resources:core,cui_GrpShare;"
              Image32by32Popup="/_layouts/15/$Resources:core,Language;/images/formatmap32x32.png?rev=23" Image32by32PopupTop="-137" Image32by32PopupLeft="-103"
              Template="Ribbon.Templates.Flexible2"
              >
                <Controls Id="Ribbon.WikiPageTab.Share.Controls">
                  <Button
                    Id="Ribbon.WikiPageTab.Share.EmailPageLink"
                    Sequence="10"
                    Command="CustomEmailPageUrl"
                    Image16by16="/_layouts/15/$Resources:core,Language;/images/formatmap16x16.png?rev=23" Image16by16Top="-115" Image16by16Left="-19"
                    Image32by32="/_layouts/15/$Resources:core,Language;/images/formatmap32x32.png?rev=23" Image32by32Top="-137" Image32by32Left="-511"
                    LabelText="$Resources:core,cui_ButEmailLink;"
                    ToolTipTitle="$Resources:core,cui_ButEmailLink;"
                    ToolTipDescription="$Resources:core,cui_STT_ButEmailLinkPage;"
                    TemplateAlias="o1"
                   />
                </Controls>
                  </Group>
            </CommandUIDefinition>
          </CommandUIDefinitions>
          <CommandUIHandlers>
            <CommandUIHandler Command="CustomEmailPageUrl" CommandAction="javascript:alert('Hello, world');" />
          </CommandUIHandlers>
        </CommandUIExtension>
      </CustomAction>
    Any help would be appreciated.
    Rajasekar A.C

    Hi,
    According to your post, my understanding is that you wanted to override the “E-mail a Link” button on the Ribbon.
    I had created a simple demo to override the “E-mail a Link” button on the Ribbon, you can have a look at it.
    <?xml version="1.0" encoding="utf-8"?>
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <CustomAction Id="Ribbon.Library.Actions.OverrideEmailLinkButton" Location="CommandUI.Ribbon" RegistrationId="101" RegistrationType="List" Title="Display the UniqueId for the list item.">
    <CommandUIExtension>
    <CommandUIDefinitions>
    <CommandUIDefinition Location="Ribbon.Library.Share.EmailLibraryLink">
    <Button Id="Ribbon.Library.Share.EmailLibraryLink.ReplacementButton" Command="ReplacementButtonCommand" Image16by16="http://s10.postimage.org/lhar0oijp/U16.png" Image32by32="http://s17.postimage.org/trf3y2ui3/U32.png" LabelText="Replaced Button" TemplateAlias="o2" />
    </CommandUIDefinition>
    </CommandUIDefinitions>
    <CommandUIHandlers>
    <CommandUIHandler Command="ReplacementButtonCommand" CommandAction="javascript:alert('This button has been replaced.');" />
    </CommandUIHandlers>
    </CommandUIExtension>
    </CustomAction>
    </Elements>
    More reference:http://msdn.microsoft.com/en-us/library/office/ff407619(v=office.14).aspx
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Loss of "Edit in Photoshop" button functionality with Photoshop CC

    First, I must say I am highly dissapponted in Adobe's decision to stop developing Encore. I know that streaming and cloud access to video projects is the fture, but DVD and BluRay is still the standard for a majority. I film events, weddings, training sessions, etc. and am still asked to provide a hard copy of the product.
    I downloaded Photoshop CC and have now lost the "Edit in Photoshop" button functionality. This was an extremely convenient feature allowing editors to modify and enhance DVD and BluRay menus easily in Photoshop given the limited options for editing in Encore itself. Unforutnately, I deleted Photoshop CS6 before checking this. I just assumed that Adobe would have kept this function.
    How can I fix this? If I need to re-download Photoshop CS6, will you provide a link to do so?
    Finally, is Adobe really sticking to its guns with not continuing Encore? It is one of the best authoring tools I have worked with for its price and its a shame to see it go.

    >will you provide a link to do so?
    While there are a "few" Adobe employees who read/post (mostly in the Premiere Pro forum) this is primarily a user to user form... so the best I can offer is the IDEA to look on the Cloud to see if there is a link to download Photoshop CS6
    The only actual CS6 link I have is to purchase the standalone (not cloud) products http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPMZ but that would mean buying outside of the cloud
    You might want to contact Adobe to ask about this - http://helpx.adobe.com/contact.html
    Next link has a "Chat Now" button near the bottom
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • The "reverse position" function for midi in the transform window does not seem to be working.

    So I'm trying to have all of the notes of my midi region play in reverse order. I found out after some research that the way to do this is via the "reverse position" function in the transform window. I opened the parameters for this and it gave me an option to select "inside" a set of measure positions, so I set it to between measure 99 (99 1 1 1) and measure 172 (172 1 1 1) and tried to "select and operate." Nothing. Tried to select manually and then hit "operate." Nothing. I then changed the condition from "inside" to "all" and manually select, then hit "operate," and this time it showed "340 events in one midi region found" at the bottom of the window but still did nothing. I haven't manually counted the notes in the region but that seems like a fair estimate that it's the right number of notes (midi events).
    Any idea why this function seems to do absolutely nothing?

    ((/MAIN/NODE1NODE2 = 'x') EX)
    This means that the condition will eval to true or false ONLY if the node exists?
    (Note: In the actual scenario, I have an IDOC and I wish to perform a similar check on a tag that may or may not exist depending
    upon the situation).
    If your requirement is to check if a node exists or not then below is the condition which you should be using:
    Left Operand: /MAIN/NODE1/NODE2
    Middle Operand: EX
    NO right operand in this case
    Regards,
    Abhishek.

  • How to make next and previous button function

    Hello
    Can anybody help me with how to achieve next and previous button function such as the one at www.bestbuy.com?
    I would appreciate any help or suggestion.
    Thank you!

    if you're not familiar with flash it might be easiest to place your initial "page" in frame 1, the 2nd (or next) page in frame 2, the 3rd/next page in frame 3 etc.
    place your previous and next buttons in their own layer that spans the main timeline (which will have as many frames as you have "pages").  give them instance names (say prevBtn and nextBtn).
    you can then use the following code placed in frame 1:
    var tl:MovieClip=this
    prevBtn.onRelease=function(){
    tl.prevFrame();
    nextBtn.onRelease=function(){
    tl.nextFrame();

  • Button Function Failure on Adobe Content Viewer

    Why do the button functions work well the first time I view them on my iPad's Adobe Content Viewer but do not function properly in subsequent viewings?
    For example, the next page buttons work flawlessly during the first viewing on the iPad. But from the second time they functions awkwardly. The Next page button on Page 1 stops functioning. The one on Page 2 takes me back to Page 1.

    Same issue-- and it's been  a few weeks now.  As far as I can tell it is a waiting issue
    This is from Page 68 from USING DIGITAL PUBLISHING SUITE
    help.adobe.com/en_US/digitalpubsuite/.../digitalpubsuite_help.pdf
    Last updated 3/23/2012
    Use the iPad Viewer to preview content
    The Adobe Content Viewer for the iPad is a generic version of the viewer used for testing the digital content you create on the iPad. The iPad viewer is updated whenever the Folio Producer tools are updated.
    Note: However, when a new set of tools is released, folios you create with those tools may not work properly until Apple approves the new viewer version. If you try to open the folio, a “Please update your app” message appears. If you have a Professional or Enterprise account, you can create a custom version of the Adobe Content Viewer. See
    “Create a custom Adobe Content Viewer for iPad” on page
    98. Otherwise, hold off on updating the tools or use the Desktop Viewer until Apple approves the updated viewer.

  • The Problem is about Standard Back Button Function in Report Program

    The Problem is about Standard Back Button Function in the Report Program.
           In the Report,First call screen Then Using "write" output some information,That is ok. but In the GUI When I press back button that is standard button,it exit screen to program.
           My question is how can i do When i press back button,the screen can be back forward first screen instand of exit screen to program.  Thanks .

    This problem is solution.I call screen using T-code and submit report In PAI,at last return to PAI.That is OK.

  • The Problem is about Standard Back Button Function in the Report Program.

    The Problem is about Standard Back Button Function in the Report Program.
    In the Report,First call screen Then Using "write" output some information,That is ok. but In the GUI When I press back button that is standard button,it exit screen to program.
    My question is how can i do When i press back button,the screen can be back forward first screen instand of exit screen to program. Thanks .

    Hi,
    You can define your own PF-STATUS and in that assign the function code for BACK button anything except 'BACK'.
    The code would somewhat look like this:
    SET PF-STATUS 'TEST'.
    write : itab-col1,
               itab-col2.
    in the PF-STATUS 'TEST', assign the function code to BACK button as 'BCK'.
    Now in your program you can use the event AT USER-COMMAND.
    In this you can handle the functionality of BACK button.
    Hope this helps.
    Regards,
    Himanshu

  • Ken Burns "reverse" button fails

    I am midway through a project using 6 megapixel photos from iPhoto making heavy use of the Ken Burns effect. However, all of a sudden the "reverse" button no longer works. Rather than simply reverse the start and end parameters as it had been all day (and with all prior and similar projects), the reverse button now resets the starting and ending coordinates.
    The key downside of this is that I can no longer stitch together two pan/zooms. This is a regular technique of mine. I create a pan/zoom on one copy of the image, then with a second copy I simply click the reverse button. This makes the ending point on the pan/zoom from the first copy of the image the starting point on the second image. This technique simulates multiple pan/zooms on a single image.

    .. in addition to Beverly's 'manual' fix...
    when iM behaves 'odd', two things to check:
    * do you have enough harddrive space on the internal drive?
    'enough' means, at last 10 - 15 GB...
    * quit iM; in Finder look at
    user/library/preferences
    for a file called
    com.apple.iMovie.plist
    trash that, empty trash; that 'resets' iM, but does no harm to any project...

  • How to Hide " AUTO Reversal" button on Journal Template

    Hi All
    Can any one please let me know how to hide or not shown option to AUTO REVERSED button  on Jounral template?
    appreiated your help
    Thanks

    Hello,
    I have figured out that this has been requested as an enhancement to the productu2026
    Unfortunately, there is no forecast to know if it will be accept and, if accepted, when it would be implementedu2026
    I know that it has not been what you've been waiting to hear...
    Best regards,
    Vin

Maybe you are looking for