Reverse fixed asset

dear gurus
plz tell me how to reverse fixed assets to wip.
thanks
dipti

Please use t-code AIST to reverse capitalize asset
AS08 - for other asset document
Rgds,
Saurabh

Similar Messages

Fix Assets Revaluation Reversal - ABAW

FA Experts,
I posted a revaluation to fix assets thru tcode ABAW. After my reconciliation of the assets I realized that one asset was posted twice for the same amount in revaluation. Before I did thi I change the depreciation key as well.
Does any one knows how to reverse a revaluation amount for a single fix asset?

I was able to reverse the entry by using same tcode ABAW and selecting 897 Revaluation (downward) current year
then re-run depreciation as a repeat and both entries will net out to zero.

Fixed Asset: market value

Hi All!
Due to IAS we must post an special provision:
when the inmaterial fixed asset value market is minor than fixed asset net value we have to post a provision by depreciation (in order to reflect the possible loss when we sale it)
This provision does not affect the fixed asset countable net value. So that provision don't have post in 01 depreciation area. But:
1- when we sell the assets the provision must appear in the sale affecting to the benefit or loss.
2- I need to know the provision for each fixed assets. That's why we need SAP shows its in FI-AA area.
With the transactions under Manual Value Correction folder (fixed asset menu) the fixed asset net value is modified.
We've tried to implement a second area doesnt affect to fixed
asset values from the 01 depreciation area and vice verse to post there this provision. But The system doesnt allow that (message error number AC528)
Do have more ideas?
Thank You in advance

Hi Vijay, thank you for your answer but...
It seems that Transferred Reserves is used to sell a fixed asset and transfer the benefit to other asset (If I've undertood right)
I put an exemple to fix the question:
I adquiered a fixed asset by 1.000 euros (a building) in 2005
- Deprecation key: LIND (Str.-line) / Use Life: 10 years
In 2007 my building on second hand house market is valuated in 500 euros (minor than fixed asset countable net value 800 euros).
So I must post a provision by depreciation by 300 euros. That post does'nt affect to fixed asset countable net value (is just a provision). My fixed asset countable net value is 800 euros.
In 2010 I sold my asset by 1.000 euros. My fixed asset countable net value is 500 euros. So my profit is 500 euros. Then I must to reverse the provision post in 2007 .
I need to post that provision related to fixed asset but without affect to asset net value, to reverse that in the asset sale.
Thank You very much
Francesc

Fixed Asset - A/P Credit memo

Hi All,
Is any body knows how to raise A/P Credit Memo for an item defined as fixed asset?
What are the things we need to take care of before raising the A/P credit memo for fixed asset item?
thanks
SV Reddy

Hi Yogi,
The scenario is like this. I have accidentally added a fixed asset into the system, for that an A/R Invoice is already raised in the B1 system. for that I like to raise a contra which is A/P Credit memo. so that will reverse the transaction.
please reply
thanks
SV Reddy

Automatic VAT code during fixed asset PO creation

Hi all,
We have a classic AUC acquisition process : through MM with IO allocation.
My question is = is it possible to automatically affect one VAT code relating to fixed asset acquisition during purchase order creation? (and not VAT relating to goods and services acquisition, we have to distinguish both with french rules).
The person in charge of PO creation don't have to choice between VAT codes, this is the reason why VAT code has to be affected automatically.
Thanks in advance for your answer.
Best Regards

Hi Ocean,
if you use as91 you have to enter as followed:
***.acquis.val.     120.242,00 <- enter
***.down paymts
***.reval.of RV
***.invst.grant
Accm.ord.deprec     70.809,18 <- enter
***.Spec.dep.
***.unplnd.dep.
***.reserves
***.reval.O.dep
Net book value     49.432,82 <- calculated automatically
***. interest
Reval. posted
Ord.dep.posted     3.340,06 <- enter
Pstd.spec.dep.
Pstd.unpl.dep.     0,00
Res.posted
Of course SAP reverses the amount because it is entered as ord dep. posted (this means current fiscal year!!!) insted of accm. ord. depr. (depr. up to 31.12.2007)
The ***. depreciation up to 31.12.2007 has to be enterend in ACCM. ord. deprec.
The *** and posted depreciation from the current year has to entered in ORD.DEP.Posted, pls. have a look at my calculation.
How to correct the fields Ord.-dep. posted and Accm ord. dep? This depends on many parameters:
Have you carried out the datantransfer already in the P-System????
Any other postings for SAP AM already carried out
How many assets have to be changed.
You can reset the Companycode in AM (only recommendable if deprun is not posted and no other postings - retirements, aquisitions transfers have been entered). Then start a new upload
Even lsmw and a BI-recording as92 with the last screen could be a solution.
At least if you have only a few assets - correct them manually - it's not worth the effort to create a BIR and a LSMW - the user is faster.
Best regards
   Horst

New user to Oracle 11i who needs help on creation of new fixed asset class

Hi all,
I am new to my Company who is using Oracle 11i. And the Company has a new class of fixed asset and a GL code has been created. But there is no link between the Fixed Asset Manager and the GL code, i.e. depreciation is not linked, additions are not captured into "Cost register", no asset number was assigned in Oracle. Please help.
Thanks,
Simon

Hi.
No, Simon, it does not work that way.
First, be sure that the distribution line has the flag "Track as Asset" checked.
Second, the GL Account to be used on the distribution line must be the one defined, in the FA Asset Category, as the Asset Clearing Account.
In FA, navigate to /Setup/Asset System/Asset Categories. Following, query a Category. There you can see which account has been used as the Asset Clearing Account.
You can use as many Asset Clearing accounts as you which, but normally, all Categories share the same account.
Now reverse the distribution line and cretae a new one with the correct account. Post it, run the Mass Additions Process and you will see the that the addition was created.
Hope this helps.
Octavio

Take back Year End Closing for Fixed Asset

Dear all,
Is it possible to reverse a year-end closing in Fixed Asset? If yes, how to do it and what are the consequences?
Users need to carry out some corrections for the closed year!
Thanks for your help.
Nas.

Hi.
Thanks for answering. If I change it in trans. OAAQ manually, should I re-run depreciation run before running the closing transaction AJAB again?
Thanks,
Nas

AuC to Fixed Asset Settlement... (through Investment Management)

Hi,
Is there any way wherein I can settle the AuC to Fixed Asset without clearing down payments related to that AuC?
Kindly assist....

Hi,
Is there any way wherein I can settle the AuC to Fixed Asset without clearing down payments related to the same?
The reason for this is my client made a down payment (with special GL indicator A) in December 2010 and he wants to settle the asset in December itself....
However, the down payment clearing is happening in this month.... But, he does not want to wait till the down payment clearing and wants to settle the same in December.
When he is trying to settle Without down payment clearing he is getting the following error...
Down payment to recipient 212000 0 area 01 amount 74,034.00 not cleared
Message no. AW605
Diagnosis
All downpayments were not cleared for the asset under construction for the receiver 130434 0 in area 01. An amount of 74,034.00 was not cleared, or too much was cleared.
You can only completely transfer an asset under construction if you reverse the down payments in the current fiscal year beforehand.
Procedure
Clear the downpayments that you want to settle to receiver 130434 0.
Kindly assist on this issue.... whether it is possble or not?
Thanks in Advance

GL balances are not matching with Fixed assets ledger

Hi,
Please suggest me regarding this...
The issues is:when the legacy balances are uploaded in to sap there was the mistake.3 assets were entered twice(once in asset class 1250 & once in asset class 1300).It causes the GL balances are not matching with Fixed Asset balances(GL is less than FA).so now the client is asking to make manual entry by removing the recconcilation account settings and post manual entry then keep the reconcilation account as usual.They wanted to reverse the accumulated depreciation for the above 3 duplicated asssets for year 2007 & 2008.
How can i achieve the below:
1.GL balance was not equal (i.e lower) to FA ledger even at the time of go live(FI is lesser than FA)
2.For this i need to post one manual entry in FI-GL with the GO-LIVE date.is it possible? suggest me how to post?
3.After that i need to reverse the accumulated depreciation for the above 3 duplicated assets.how can i do this?
4.After that i need to remove the above 3 duplicated assets,how can i?
Please help me by giving your thoughts regarding this
Thanks
Sap Guru

Hi,
It is possible to post the adjustment entry from go live date provided you open the posting periods for the pervious year. (However this approach is not recommended for the following reasons - you have closed the books and must have published the results to local authorities. Adjustment now in the past year can cause some trouble from auditors etc. Secondly you are adjusting the GL balance for the last year, so you will have to complete the period end and year end closing for GL balances. So avoid kindly it)
For your problem - Go to transaction code OASV and post adjustment entry for the current period. Also check if your field status of assets contain field for shutdown of assets. If not change your field status accordingly. Once adjustment is done you shutdown the asset so that it does not post depreciation in future depreciation runs. (this will cater to your need of eliminating the assets. If you retire the asset then you will have to deal with gain or loss on retirement of an asset. If you can accommodate this entry, then you can use this figure in the final adjustment entry.)
Or Go to transaction code OAMK and set the recon account to post the adjustment entry.
Reversal of depreciation is not possible in SAP. So the only way to reverse the accumulated depreciation is by changing the recon account or using OASV, and passing adjustment entry.
regards
Thomas

Best Practice for Impairment Of Fixed Assets

Dear friends,
I have seen lots of thread about impairment of fixed assets. However, lots of it have different solutions and some resulted in need to use different depreciation area too.
Since IFRS is so common to all countries nowadays, I believe SAP should have a standard solution for treatment of impairment for fixed assets. Basically, it should affect only depreciation area 01 so that asset history sheet will show all movement of fixed assets in one sheet, show reduced the depreciation calculated IMMEDIATELY (not only in new fiscal year when using unplanned depreciation), and also be able to reverse that impairment accordingly subjected to limitation of earlier impairment value and what taken out via reduced depreciation.
What is the BEST standard practice that all consultants can use as long as that country follow IFRS? Other packages already have a fixed solution but in SAP, we are still disputing which is the right one.
Thanks,
Stephen Siew

Hi Stephen,
How you set it up is based on your bussiness requirements, (paralel ledgers, currencies,...) In the most cases you have more depreciation area's some are creating posting other ones are statistical.
I think in the most cases you will have a minimum from 3 depreciation areas
01 Local books Real-on that create postins
02 Tax book Based on the local tax rules
10 IFRS Create postings or not
When you use IFRS you have to think about the transaction AR29N - Post Revaluation and New Valuation (see the help there).
With this transaction you can upload (new) values from am excel file Search on this forum with AR29N, Marcus give some tips about it
You can use idexes to for doing the revaluation

FAGL_FC_TRANS for Fixed Assets

SAP experts,
We are doing FC Valuation and translation for a foreign subsidiaries to report US GAAP . ( FAGL_FC_VAL for FC valuation followed by FAGL_FC_TRANS for Translating the group currency with spot/avg raye for BS and PL respectively). Confiured BS adjustment account for translation and the translation difference posted at Month end ( BS adjustment acccount) at month end and reverse it on 1st day of next period. No update on individual accounts.
The FASB docs explains that FASB amount is to strip off the EX rate influence on the BS numbers of Foreign subsidiaries. ( Group currency amount of Foreign Subsidiary in SAP)
Gone thru SDN and came to know the treatment to be given to Fixed assets. Looks like it need not be valuated as it sits on Balance sheet long time. It is not clear . In simple terms do we have to include Fixed assets and accumilated depreciation in FAGL_FC_TRANS or not?
Answer is yes for Translation the what rate . How do I derive the correct historical rate as the assets are carried over a long period when we do not update the assets Group currency amount.
Do we do the translation for all P&L accounts also?
Appreciate early replies.
Regards

Please see my responses below.
1. For all BS accounts using Spot rate - yes, the rate on the last day of the month.
2. For Fixed assets account different rate - same rate applied to all balance sheet accounts
3. For PL balances separately after ticking the P&L accounts - yes, but this is at the average rate for the month
4. Do we have to check (tick mark) the u2018valuate period balance only u2018 on the screen for PL? YES
Is the fixed assets GL accounts are to be treated in a different way unlike other BS accounts? - I don't see any reason why they should be handled differently.
The Fixed assets are to be re measured with different ex rate ie Historical rate? - No. It is the equity that you want to keep at historical rate.
How do I get historical rate? - The historical rate is on the individual postings on the account. You don't need to get the historical rate from anywhere, as you just leave the historical rate on equity account postings, by excluding these accounts from the selection screen of your Balance Sheet translation variant.
Make sure that for BS translation, you also reverse the translation program entries on the first day of next month. You don't need to do this for PL translation, as you are translating period balance only.
What steps to be followed to complete the FASB52 and how to reconcile with manual. - All of the above conform with FAS 52 rule. What do you have in your manual record? I would eliminate the need for any reconciliation once you are in SAP. A spot check in your testing cycles should do!

Smoothing on Fixed Assets

Good day SAP Gurus
I would like somebody to explain the mechanics of smoothing on fixed assets. I am having two scenarios, I want to guided with.
We are having two companies one the same client, one having the smoothing on (flagged) and the other not. The problems I encountered were:
1. Company A (smoothing flagged): Bought an asset on 1/11/2007 for UNI 1615731.76 useful live being 2 years. Company year end being June. My calculation is that this asset should be fully depreciated by Oct 2009. What happened is that the depreciation of the last fiscal year is being divided over the whole year and not the remaining 4 months. According to what SAP say this is correct <<If you set this indicator, the depreciation posting program calculates
the periodic depreciation to be posted by distributing the remaining
depreciation to be posted equally over the remaining periods of the
fiscal year>>
, but the company felt we must take off that smoothing so that the depreciation must end in October as indicated (schedule).
2. Company B (smoothing not flagged): Year end also June. (Both companies belong to the same group). Bought an asset on 1/3/2009 for UNI 5307.00 useful live being 4 years. This asset is only loaded on the 23/7/2009 on the system (after year end). Meaning in the year ended June 2009, I should have had a depreciation of UNI 442.00. When I execute the depreciation run in July, the system is not adding this amount (442) to depreciation of July. What I see is that the residual value remains 442. But if I flag the smoothing the depreciation is working correctly.
Can some of you the experts please give the rationale behind smoothing? One company in the Group having smoothing flagged and the other not. Where are we going wrong?
Thanking you
Theo

This is the help from Smooting. You can found more information in the asset forum when you search on Smooting.
Smoothing (deprec. for past) when posting depreciation
If you set this indicator, the depreciation posting program calculates the periodic depreciation to be posted by distributing the remaining depreciation to be posted equally over the remaining periods of the fiscal year.
Otherwise the system calculates in each period (based on the total annual depreciation) the amount of depreciation that must be posted from the start of the fiscal year to the current period. The depreciation already posted is then subtracted from this amount. If too little or too much depreciation has been posted in previous periods, the system either makes up or reverses the difference in full during the next depreciation posting run using the catch-up method (depreciation for past periods in a lump sum).

Fixed Assets: Changing Category, Depreciation, life

hi
i have an requirement where we need to change asset category, depreciation method, no depreciation and life(1 month). And want to make total depreciation to zero.
Ex:
Asset#A1 already depreciated some amount.
Original category X and degault rules are set to Depreciable.
Defined to new category Y and associate default rules to all CORP and TAX books to not depreciate.
Changed from category X to Y
Now after reclassification, it is depreciating entire amount of the asset and posting to current open period. As the reclassification does not default the new category depreciation flag, it is depreciating entire fixed asset cost immediately. I didn't run depreciation.
Now how do i change YTD depreciation to zero?
Thanks in advance for all your suggestions.....
Need it immediately.....

Hmm, did you not test this out in a test environment first before doing this in production? Can you be specific on the choices that you made when you changed this asset? Maybe you chose to expense the adjustment in the current period rather than to amortize? Because you originally had it in a depreciable status, then changing it to new financial information, looks like it is choosing to expense the remaining asset cost immediately (which is why you are getting depreciation without having run depreciation). You may need to contact Oracle support at this point to find out how to best recover from this. Though if just one asset, you can just do a journal entry to reverse the depreciation. Then you would want to contact support to find out what is the best way in the future to make this kind of change. The documentation unfortunately does not address the kind of change you were making here. Doe show that it is important to get the depreciation setup correct before activating an asset.
John Dickey

How to repeat depreciation run for fixed assets

Dear Sir(s),
we are on SAP B PL03. We would like to re-run depreciation for some fixed assets to correct a previous depreciation run which was executed by mistake. The depreciation was posted to the GL accounts.
We are not able to get this option of re-running the depreciation even after changing the depreciation types of these fixed assets in the fixed asset master data. The depreciation run screen just displays a list of all previous depreciation runs.
Asif

Hi Asif,
The last depreciation you have run showing you in depreciation window,that depreciation you executed by mistake van remove by right click on that depreciation row and remove that row. Doing this your financial posting will be reverse then you can execute depreciation for the same period.
Thanks

Credit memo for Fixed Asset

Hi Experts,
My company has purchased a fixed asset and found the item is spoil. It will be returned to vendor and receive credit memo from them. But I found the credit memo in SAP there is no column to let me key in my asset tagged number and it credits to my SUPPLY and MATERIAL account which should credit to my Fixed Asset account. Please advise what is probably way to key in credit memo?

Hi,
Acording to me you can reverse the MIGO Document or you can reverse the Asset Document through T-Code AB08 and then the entry will be reversed. Else youo can crerate a return PO and then do MIGO of Return PO by that once you execute MIGO then the entry would be reversed and hence the effect would be nullified. Kindly check the above solutions and revert.
Regards,
Malhar.

Reverse fixed asset

Similar Messages

Maybe you are looking for